Applying a patch
I'm having a problem setting my wireless card to monitor mode and apparently this is the solution. Unfortunately, I have no idea how to apply this patch or which files to patch. Could somebody please help me out? Thanks!
SOLVED!
Speak of the devil! I was just about to make a thread on the same subject about a patch problem I have had for a few days now.
Ok, I have read the "Patching in ABS" wiki entry, but I am still having issues with patching a custom WINE build. At the moment I am unsure of whether it is an issue with the patch or if it is an issue with my PKGBUILD. Here is the output I get from makepkg:
can't find file to patch at input line 4
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -pur wine/dlls/user32/Makefile.in wine/dlls/user32/Makefile.in
|--- wine/dlls/user32/Makefile.in 2010-10-15 21:37:09.000000000 +0400
|+++ wine/dlls/user32/Makefile.in 2010-10-18 22:44:01.000000000 +0400
Instantly I'm thinking this is possibly a directory transversal issue. The way the PKGBUILD for wine works is it has a 64-bit and 32-bit install and creates them in seperate directories from the looks of things. I may be completely wrong, I am only a newb (Tread softly, please ). I have tried everything possible from copying the patch file to the source directory like the wiki mentions, copying the patch file to the actual package directory itself, and a few other iterations of changes that I can't seem to recall.
Here is the PKGBUILD and patch I am trying to use.
PKGBUILD: http://paste.pocoo.org/show/335187/
Patch: http://paste.pocoo.org/show/335188/
Yes, I realize it's using an older version of WINE. I was backtracking to see if it was just a possible issue with the patch or not. I am not extremely knowledgeable about patching (Or ABS for that matter yet!), but I am willing to learn.
EDIT: Oh also I could not figure out how to add the patch to the source array. Any help with this would be appreciated as it would probably solve the problem of having to copy the patch two times in the PKGBUILD.
EDIT2 (SOLVED): My problem was solved simply by adding the patch to sources (Figured out how to finally do that with the help of people in IRC and looking at Skype's PKGBUILD). I also removed the individual "cp ($patch)" lines and made an individual one underneath where PKBUILD renames the '$pkgbuild' directory. Also ran into to some compiling errors because I forgot to add a forward slash spacer in the configure portions of the install. Newb mistakes fixed thanks to some help, reading, and common sense (Doh, I lost mine in the /tmp/ folder apparently).
Last edited by dexxra (2011-02-09 20:17:36)
Similar Messages
-
Error : While applying the Patch 4440000
Error : While applying the Patch 4440000
FAILED: file igwprop.odf on worker 1 for product igw username IGW.
When i check the worker log file i got this error
The sequence IGW_AWARDS_S in the database is defined as:
MINVALUE = 1 MAXVALUE = 2147483647 INCREMENT BY = 1
CYCLE = NO ORDER = NO CACHE = 1000
which should be defined as:
MINVALUE = 10000 MAXVALUE = 2147483647 INCREMENT BY = 1
CYCLE = NO ORDER = NO CACHE = 1000
(Note: The cache value for sequence IGW_AWARDS_S is 20 in the ODF file. The value 1000 is being used instead because this provides better performance when selecting from the sequence.)
Alter the sequence with :
Start time for statement below is: Sun Oct 06 2013 22:16:28
ALTER SEQUENCE IGW.IGW_AWARDS_S MINVALUE 10000
AD Worker error:
The following ORACLE error:
ORA-04007: MINVALUE cannot be made to exceed the current value
occurred while executing the SQL statement:
ALTER SEQUENCE IGW.IGW_AWARDS_S MINVALUE 10000
AD Worker error:
Unable to compare or correct sequences
because of the error above
Time when worker failed: Sun Oct 06 2013 22:16:28
plz help me in solving this.Check the current value of IGW_AWARDS_S sequence and make sure the MINVALUE in the patch (i.e. 10000) is not greater than the current one.
OERR: ORA 4007 MINVALUE cannot be made to exceed the current value (Doc ID 19824.1)
You may also log a SR.
Thanks,
Hussein -
Error while applying the patch 9239089
Dear All,
I have installed the Oracle E-Business Suite Release 12(12.1.1) on Windows 2003 (32-bit) OS successfully.Its a single node installation.
Hardware & Software Specifications:
- Intel Core 2 Duo, CPU 2.40 GHz
- 2 GB of RAM
- 180 GB Hard Drive
- Windows XP Professional with Sevice Pack 2
The problem is when I try to apply a patch 9239089, it gives error atleast 2-3 times as below
An error occurred while relinking application programs.
Continue as if it were successful [No] :
And the Patch gets completed.
Find the log of the patch below:
An error occurred while extracting files from library.
Continue as if it were successful [No] : Yes
Done extracting object modules from product libraries.
STOP_TASK: [Perform libout actions] [] [Mon Mar 28 2011 18:07:15]
STRT_TASK: [Perform version checking] [] [Mon Mar 28 2011 18:07:15]
Performing version checking...
Log and Info File sync point:
Mon Mar 28 2011 18:07:15
AutoPatch found some files which it will not apply.
These files are listed in the AutoPatch informational message file.
STOP_TASK: [Perform version checking] [] [Mon Mar 28 2011 18:07:15]
STRT_TASK: [Determine directories to create] [] [Mon Mar 28 2011 18:07:15]
Skipping...
Determine directories to create for Specified driver
since no such action is present for this driver file
STOP_TASK: [Determine directories to create] [] [Mon Mar 28 2011 18:07:15]
STRT_TASK: [Determine executables to link] [] [Mon Mar 28 2011 18:07:15]
Determining what executables to link...
STOP_TASK: [Determine executables to link] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Determine forms executable files to generate] [] [Mon Mar 28 2011 18:07:16]
Skipping...
Determine forms to generate for Specified driver
since no such action is present for this driver file
STOP_TASK: [Determine forms executable files to generate] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Determine Reports PL/SQL library files to generate] [] [Mon Mar 28 2011 18:07:16]
Skipping...
Determine Oracle Reports libraries to generate for Specified driver
since no such action is present for this driver file
STOP_TASK: [Determine Reports PL/SQL library files to generate] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Determine Reports files to generate] [] [Mon Mar 28 2011 18:07:16]
Skipping...
Determine reports to generate for Specified driver
since no such action is present for this driver file
STOP_TASK: [Determine Reports files to generate] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Determine message files to generate] [] [Mon Mar 28 2011 18:07:16]
Skipping...
Determine if need to generate message files for Specified driver
since no such action is present for this driver file
STOP_TASK: [Determine message files to generate] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Find bugs with no active actions] [] [Mon Mar 28 2011 18:07:16]
Looking for active bug fixes with no active actions...
About to turn off duplicate actions: Mon Mar 28 2011 18:07:16
Start of adptod(): Mon Mar 28 2011 18:07:16
Actions scanned: 382
Duplicate actions: 0
End of adptod(): Mon Mar 28 2011 18:07:16
Done turning off duplicate actions: Mon Mar 28 2011 18:07:16
About to turn off bugs with no active actions: Mon Mar 28 2011 18:07:16
Start of adpunb(): Mon Mar 28 2011 18:07:16
Active bugs at start: 72
Bugs turned off: 71
Outer loop iterations: 72
Actions scanned: 47
End of adpunb(): Mon Mar 28 2011 18:07:16
Done turning off bugs with no active actions: Mon Mar 28 2011 18:07:16
About to save release list to filesystem: Mon Mar 28 2011 18:07:16
Done saving release list to filesystem: Mon Mar 28 2011 18:07:16
STOP_TASK: [Find bugs with no active actions] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Display customized files] [] [Mon Mar 28 2011 18:07:16]
Reading customized files list (if any)...
Did not find customized files registration file
"D:\oracle\PROD\apps\apps_st\appl\admin\applcust.txt"
The file may have been uploaded to the database.
This patch replaces the following customized files:
No customized files are replaced by this patch.
STOP_TASK: [Display customized files] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Copy files] [] [Mon Mar 28 2011 18:07:16]
Copying files into installation area...
No files were selected for copying.
STOP_TASK: [Copy files] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Forcecopy files] [] [Mon Mar 28 2011 18:07:16]
Skipping...
ForceCopy files into installation area for Specified driver
since no such action is present for this driver file
STOP_TASK: [Forcecopy files] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Perform libin actions] [] [Mon Mar 28 2011 18:07:16]
Archiving object modules into product libraries...
No object modules were selected for archiving.
STOP_TASK: [Perform libin actions] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Create directories] [] [Mon Mar 28 2011 18:07:16]
Skipping...
Create Directories for Specified driver
since no such action is present for this driver file
STOP_TASK: [Create directories] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Relink executables] [] [Mon Mar 28 2011 18:07:16]
Relinking executables...
An error occurred while relinking application programs.
Continue as if it were successful [No] : Yes
AutoPatch is exiting successfully.
sqlplus -s APPS/***** @D:\oracle\PROD\apps\apps_st\appl\ad\12.0.0\sql\adtimrpt.sql 15831 adt15831
Spooling to adt15831.lst
Spooling to adt15831.csv
A job timing report has been generated for the current session.
You should check the file
D:\oracle\PROD\apps\apps_st\appl\admin\PROD\out\adt15831.lst
for details.
Purging timing information for prior sessions.
sqlplus -s APPS/***** @D:\oracle\PROD\apps\apps_st\appl\ad\12.0.0\sql\adtpurge.sql 10 1000
Done purging timing information for prior sessions.
AutoPatch is complete.
AutoPatch may have written informational messages to the file
D:\oracle\PROD\apps\apps_st\appl\admin\PROD\log\9239089.lgi
Errors and warnings are listed in the log file
D:\oracle\PROD\apps\apps_st\appl\admin\PROD\log\9239089.log
and in other log files in the same directory.
Regards,
Vinayak KHi,
Find the Output
D:\oracle\PROD\apps\apps_st\appl>make -v
GNU Make 3.81
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
This program built for i686-pc-cygwin
D:\oracle\PROD\apps\apps_st\appl>gnumake -v
GNU Make 3.81
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
This program built for Windows32
D:\oracle\PROD\apps\apps_st\appl>APPSPROD_ebstest.cmd
ECHO is off.
ECHO is off.
Tue 03/29/2011 07:05 PM
ECHO is off.
ECHO is off.
This script requires the following files:
ECHO is off.
C:\MSV\VC\bin\bin\vcvars32.bat
ECHO is off.
APPSORA.cmd exiting with status 0
D:\oracle\PROD\apps\apps_st\appl>echo %PATH%
D:\oracle\PROD\apps\apps_st\appl\au\12.0.0\bin;D:\oracle\PROD\apps\apps_st\appl\
fnd\12.0.0\bin;D:\oracle\PROD\apps\apps_st\appl\ad\12.0.0\bin;D:\oracle\PROD\app
s\tech_st\10.1.3\appsutil\jdk\jre\bin;D:\oracle\PROD\apps\tech_st\10.1.3\perl\5.
8.3\bin\MSWin32-x86-multi-thread\;D:\oracle\PROD\apps\apps_st\comn\util\unzip\un
zip;D:\oracle\PROD\apps\tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\PROD\apps\tech
st\10.1.2\bin;D:\oracle\PROD\apps\techst\10.1.3\appsutil\jdk\bin;D:\oracle\PRO
D\apps\tech_st\10.1.3\appsutil\jdk\jre\bin;C:\cygwin\bin;C:\WINDOWS;C:\WINDOWS\s
ystem32;D:\oracle\PROD\apps\tech_st\10.1.3\ant\bin
D:\oracle\PROD\apps\apps_st\appl>
Regards,
Vinayak K -
Error while applying Java Patch 16 on WAS 640 ABAP+JAVA
Hello Masters,
I am in process of applying Patch 16 to my BW 3.5 WAS 640 ABAP+JAVA systems. I have successfully applied ABAP patch level to 16. Now I am applying to J2EE Patch 16 to system. I did prerequisite check and everything is okay. Platform - Sun Solaris 9, Oracle 9.2.0.6. When I click on apply Patch 16, it goes thru central instance profile, java home directory okay. After this it is asking me to supply file for JCE and I gave path for file "jce_policy-1_4_2.zip". after that it extracts this file to Java_home/jre and at point when it tries to extract visual.dat, it throws following error :
CJS-00030 Assertion failed: in
function () {
if (!this.hasJ2EE()) {
installer.writeTrace("Can't determine JAVA_HOME of instance " + this.getName() + ": no J2EE engine installed.");
return undefined;
var fmgt = new FileMgt();
var instanceProfile = this.getProfile();
var javaHome = instanceProfile.get("jstartup/vm/home");
if (javaHome) {
return javaHome.value();
var pname = this.getDirInstance() + "/j2ee/cluster/instance.properties";
var pNode = fmgt.getNode(pname);
ASSERT_DEFINED(arguments.callee, pNode, "pNode(" + pname + ")");
var stream = pNode.getFileStream("READ");
ASSERT_DEFINED(arguments.callee, stream, "stream(" + pname + ")");
var props = new R3Profile(stream);
for (var it = props.propertyNames(); !it.isDone(); it.next()) {
var p = it.get();
if (p.name().indexOf("JavaPath") != -1) {
return p.value();
ASSERT(arguments.callee, false, "no property with JavaPath in its name found in file " + pname);
no property with JavaPath in its name found in file /usr/sap/QWA/DVEBMGS02/j2ee/cluster/instance.properties
ERROR 2006-08-03 14:57:30
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
WARNING 2006-08-03 14:57:30
The step checkIfSafeModeIsEnabled with step key ApplySupportPackage|ind|ind|ind|J2EE_Engine|6.30|0|PatchJ2eeEngine|ind|ind|ind|J2EE_Engine|6.30|0|checkIfSafeModeIsEnabled was executed with status ERROR.
WARNING 2006-08-03 14:58:54
An error occurred during the installation.
Your input will be greately appreciated and would reward points.
Thanks,
DigeshHello Digesh,
The firt thing please go to os level prompt for <SID>adm user and type echo $JAVA_HOME. What is the value that is reflected after issuing the above.
Also please check that your SAP-J2EE instance is running properly or not.
The JCE is used for Weak and strong encryption.
Also please check the instance.properties file. Does it contain proper parameter as per your SAP installation.
Regards,
Prem -
Error in applying the patch to OBIEE 11.1.1.6.8
When I try to apply the opatch apply command, below is the error I am getting. I am not able to find the resolution for this. I am not understanding the problem by looking at this.
optach failed with error code 1
C:\Middleware\Oracle_BI1\16094198>opatch apply
Exception in thread "main" java.lang.NoClassDefFoundError: Files\Java\jdk1/7/0_4
5\lib;;C:\MIDDLE~1\ORACLE~1/modules/oracle/jrf_11/1/1/jrf-wlstman/jar;C:\MIDDLE~
1\ORACLE~1/modules/oracle/jrf_11/1/1/jrf-wlstman/jar
Caused by: java.lang.ClassNotFoundException: Files\Java\jdk1.7.0_45\lib;;C:\MIDD
LE~1\ORACLE~1.modules.oracle.jrf_11.1.1.jrf-wlstman.jar;C:\MIDDLE~1\ORACLE~1.mod
ules.oracle.jrf_11.1.1.jrf-wlstman.jar
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
Could not find the main class: Files\Java\jdk1.7.0_45\lib;;C:\MIDDLE~1\ORACLE~1/
modules/oracle.jrf_11.1.1/jrf-wlstman.jar;C:\MIDDLE~1\ORACLE~1/modules/oracle.jr
f_11.1.1/jrf-wlstman.jar. Program will exit.
I have installed OBIEE 11.1.1.6.0 version on windows 64 bit machine and later on I tried to apply the patch to upgrade it to 11.1.1.6.8 . Once I received above error , I thought of cross checking the PATH & Java_Home environment variables from my machine and below are snapshots of them.
Java Home : C:\Program Files\Java\jdk1.7.0_45\bin
Path: C:\oraclexe\app\oracle\product\11.2.0\server\bin;C:\Program Files (x86)\RSA SecurID Token Common;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Intel\Services\IPT\;C:\Middleware\Oracle_BI1\products\Essbase\EssbaseServer\bin;C:\Middleware\Oracle_BI1\bin;C:\Middleware\Oracle_BI1\opmn\bin;C:\Middleware\Oracle_BI1\opmn\lib;C:\Middleware\Oracle_BI1\perl\bin;C:\Program Files\Java\jdk1.7.0_45\bin
below are the commands executed in the first step before applying opatch apply on 16094198
set ORACLE_HOME=C:\Middleware\Oracle_BI1
set PATH=%ORACLE_HOME%\bin;%PATH%
set JAVA_HOME=%ORACLE_HOME%\jdk
set PATH=%JAVA_HOME%\bin;%PATH%
set PATH=%ORACLE_HOME%\OPatch;%PATH%
Any inputs on how to resolve this opatch problem will be greatly appreciated. Please let us know if I have to make any change in the environmental variables or in these set commands stated above.
Thanks in advance.Heelo Srini,
I have updated my JAVA_HOME system variable in environmental variables section as stated below
User variables:
JAVA_HOME : C:\Program Files\Java\jdk1.7.0_45
PATH : %JAVA_HOME%\bin
System variables:
ClassPath: C:\Program Files\Java\jdk1.7.0_45\lib;
Path: C:\oraclexe\app\oracle\product\11.2.0\server\bin;C:\Program Files (x86)\RSA SecurID Token Common;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Intel\Services\IPT\;C:\Middleware\Oracle_BI1\products\Essbase\EssbaseServer\bin;C:\Middleware\Oracle_BI1\bin;C:\Middleware\Oracle_BI1\opmn\bin;C:\Middleware\Oracle_BI1\opmn\lib;C:\Middleware\Oracle_BI1\perl\bin;C:\Program Files\Java\jdk1.7.0_45\bin
Later I tried to apply the patch but I got the below error
C:\Middleware\Oracle_BI1\16094198>opatch apply
Exception in thread "main" java.lang.NoClassDefFoundError: Files\Java\jdk1/7/0_4
5\lib;;C:\MIDDLE~1\ORACLE~1/modules/oracle/jrf_11/1/1/jrf-wlstman/jar;C:\MIDDLE~
1\ORACLE~1/modules/oracle/jrf_11/1/1/jrf-wlstman/jar
Caused by: java.lang.ClassNotFoundException: Files\Java\jdk1.7.0_45\lib;;C:\MIDD
LE~1\ORACLE~1.modules.oracle.jrf_11.1.1.jrf-wlstman.jar;C:\MIDDLE~1\ORACLE~1.mod
ules.oracle.jrf_11.1.1.jrf-wlstman.jar
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
Could not find the main class: Files\Java\jdk1.7.0_45\lib;;C:\MIDDLE~1\ORACLE~1/
modules/oracle.jrf_11.1.1/jrf-wlstman.jar;C:\MIDDLE~1\ORACLE~1/modules/oracle.jr
f_11.1.1/jrf-wlstman.jar. Program will exit.
OPatch failed with error code = 1
Please provide any inputs.
Thanks & regards,
karthik Vecham -
Error while applying INLOC patch on 11i platform windows 2003.
Hi all,
follwoing error and warning occur while applying INDIA LOCALIZATION patch 6410725 on windows 2003.
***Error! Could not copy ja_in_tran_rg_entry_trg.sql to E:\inloc\ILP\patch\6410725\backup\patch/115/sql. Skipping..The syntax of the command is incorrect.
Copied patch\115\sql\ja_in_tran_rg_entry_trg.sql successfully to d:\oracle\visappl\ja\11.5.0\patch\115\sql.
Applied ja_in_tran_rg_entry_trg.sql successfully.
***Error! Could not copy ja_in_reqn_curr_upd_trg.sql to E:\inloc\ILP\patch\6410725\backup\patch/115/sql. Skipping..The syntax of the command is incorrect.
Copied patch\115\sql\ja_in_reqn_curr_upd_trg.sql successfully to d:\oracle\visappl\ja\11.5.0\patch\115\sql.
Applied ja_in_reqn_curr_upd_trg.sql successfully.
***Warning! Could not create patch/115/sql directory. Skipping..
The system cannot find the path specifiedBacked jai_cmn_dbg_ctx.pls in from databaseCopied patch\115\sql\jai_cmn_dbg_ctx.pls successfully to d:\oracle\visappl\ja\11.5.0\patch\115\sql.
Applied jai_cmn_dbg_ctx.pls successfully.
***Warning! Could not create patch/115/sql directory. Skipping..
The system cannot find the path specifiedBacked ja_in_balance_transfer.sql in from databaseCopied patch\115\sql\ja_in_balance_transfer.sql successfully to d:\oracle\visappl\ja\11.5.0\patch\115\sql.
Applied ja_in_balance_transfer.sql successfully.
***Warning! Could not create patch/115/sql directory. Skipping..
The system cannot find the path specifiedBacked jai_cmn_dbg_ctx.plb in from databaseCopied patch\115\sql\jai_cmn_dbg_ctx.plb successfully to d:\oracle\visappl\ja\11.5.0\patch\115\sql.
Applied jai_cmn_dbg_ctx.plb successfully.
Skipping JAI_ARSETUP_C.ldt because FND patchset level is H..Copied JAI_ARSETUP_E.ldt successfully to E:\inloc\ILP\patch\6410725\backup\patch\115\import\US.
Copied patch\115\import\US\JAI_ARSETUP_E.ldt successfully to d:\oracle\visappl\ja\11.5.0\patch\115\import\US.
Applied JAI_ARSETUP_E.ldt successfully.
I have check all pre requisites, is any steps before applying the patch to avoid this kind error?
regards,
sandeep.Hi,
i dont understand why path is changing
E:\inloc\ILP\patch\6410725\backup\patch / 115 / sql
1)did u give correct path of patch directory when installing patch?
2)are u installing the patch from inside the patch directory?if not do it and check
3)give full permission to everyone on the patch directory
Regards
Edited by: Ahmed@hungry_dba on Feb 14, 2010 10:52 PM -
While applying the patch 10270433
While applying the patch 10270433 i got this error
The fix for Patch 7426842, are included in the patch currently
being installed (10270433)
Patch(es) 7140405, 8602992, conflict with the patch currently
being installed (10270433)
If you continue, all patches will be rolled back and the new patch
(10270433) will be installed.
Note: If the patch currently being installed (10270433) is rolled back,
it is recommended that the fixes being rolled back here (7426842, 7140405, 8602992, ) are reinstalledThe fix for Patch 7426842, are included in the patch currently
being installed (10270433)This is not an error message so you can ignore it.
Patch(es) 7140405, 8602992, conflict with the patch currently
being installed (10270433)
If you continue, all patches will be rolled back and the new patch
(10270433) will be installed.
Just apply Patch 10270433 and this will rollback other patches -- Please make sure you take a backup before applying this patch.
Thanks,
Hussein -
While applying the patch getting an error Failed:xdoloader.class on worker
Hi,
While applying the patch getting an error Failed:xdoloader.class on workerWhile applying the patch getting an error Failed:xdoloader.class on workerPlease post the details of the application release, database version and OS.
What is the patch number you are trying to apply?
Please post the complete error message from adpatch log file.
Thanks,
Hussein -
SPAM error while applying ABAP patch 13
Hi all,
I was applying patches on neweaver system Windows oracle platform.
All patches till now successfully applied except patch 13 for ABAP and now situation is spam is running from alomost 24 Hrs and i have also tried to restart the same but all jobs RDD* jobs are running fine
except a job named <b>RDDEXECL</b> runs along with this particular patch import OCS_queue_import and both jobs runs for long long time.
I have never seen this job RDDEXECL before applying all patches , why this is appearing now and why patch is not proceeding further.
Can any body aware of this issue.
Best Regards
AjitRSAPRA70013.MOB
1 ETP199X######################################
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP101 transport order : "SAPKA70013"
1 ETP102 system : "MOB"
1 ETP108 tp path : "tp"
1 ETP109 version and release : "370.00.01" "700"
1 ETP198
2 EPU126XPost-import methods for change/transport request: "SAPKA70013"
4 EPU111 on the application server: "Cymobile"
2 EPU122XPost-import method "ENHS_AFTER_IMPORT" started for "ENHS" "L", date and time: "20071018203831"
1AETR012XProgram terminated (job: "RDDEXECL", no.: "20382300")
1AEPU320 See job log"RDDEXECL""20382300""MOB"
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP110 end date and time : "20071018214713"
1 ETP111 exit code : "12"
1 ETP199 ######################################
1 ETP199X######################################
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP101 transport order : "SAPKA70013"
1 ETP102 system : "MOB"
1 ETP108 tp path : "tp"
1 ETP109 version and release : "370.00.01" "700"
1 ETP198
2 EPU126XPost-import methods for change/transport request: "SAPKA70013"
4 EPU111 on the application server: "Cymobile"
2 EPU122XPost-import method "ENHS_AFTER_IMPORT" started for "ENHS" "L", date and time: "20071018223851"
1AETR012XProgram terminated (job: "RDDEXECL", no.: "22385100")
1AEPU320 See job log"RDDEXECL""22385100""MOB"
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP110 end date and time : "20071018234551"
1 ETP111 exit code : "12"
1 ETP199 ######################################
Alog:
ALL MOB.ALL t 0000 20071017024723 DDIC Cymobile
SAPKA70013 MOB.ALL m 0000 20071017024735 SAPUSER DDIC Cymobile
SAPKA70013 MOB.ALL L 0004 20071017024759 SAPUSER DDIC Cymobile 20071017024742
SAPKA70013 MOB.ALL P 0004 20071017024816 SAPUSER DDIC Cymobile 20071017024805
ALL MOB.ALL t 0000 20071017025455 DDIC Cymobile
SAPKA70013 MOB.ALL m 0000 20071017025506 SAPUSER DDIC Cymobile
SAPKA70013 MOB.ALL L 0004 20071017025527 SAPUSER DDIC Cymobile 20071017025515
SAPKA70013 MOB.ALL P 0004 20071017025540 SAPUSER DDIC Cymobile 20071017025531
SAPKA70013 MOB.ALL H 0004 20071017025659 SAPUSER DDIC Cymobile 20071017025607
SAPKA70013 MOB.ALL A 0004 20071017025913 SAPUSER DDIC Cymobile
ALL MOB.ALL S 0000 20071017025927 DDIC Cymobile 20071017025917
ALL MOB.ALL 6 0000 20071017025952 DDIC Cymobile 20071017025917
SAPKA70013 MOB.ALL I 0004 20071017034147 SAPUSER DDIC Cymobile 20071017025917
ALL MOB.ALL t 0000 20071017083839 DDIC Cymobile
ALL MOB.ALL 6 0000 20071017084848 DDIC Cymobile 20071017083842
ALL MOB.ALL t 0000 20071017093945 DDIC Cymobile
ALL MOB.ALL 6 0000 20071017094050 DDIC Cymobile 20071017093946
ALL MOB.ALL t 0000 20071017215856 DDIC Cymobile
ALL MOB.ALL 6 0000 20071017221604 DDIC Cymobile 20071017215858
ALL MOB.ALL t 0000 20071018045219 DDIC Cymobile
ALL MOB.ALL 6 0000 20071018045857 DDIC Cymobile 20071018045220
ALL MOB.ALL n 0000 20071018065536 DDIC Cymobile 20071018045220
ALL MOB.ALL t 0000 20071018073844 DDIC Cymobile
ALL MOB.ALL 6 0000 20071018074057 DDIC Cymobile 20071018073846
ALL MOB.ALL n 0012 20071018075324 DDIC Cymobile 20071018073846
ALL MOB.ALL n 0012 20071018075353 DDIC Cymobile 20071018073846
ALL MOB.ALL t 0000 20071018203759 DDIC Cymobile
ALL MOB.ALL 6 0000 20071018203805 DDIC Cymobile 20071018203800
SAPKA70013 MOB.ALL R 0012 20071018214713 SAPUSER DDIC Cymobile
ALL MOB.ALL t 0000 20071018214841 DDIC Cymobile
SAPKA70013 MOB.ALL R 0012 20071018234551 SAPUSER DDIC Cymobile
ALL MOB.ALL t 0000 20071018234807 DDIC Cymobile -
Opatch error while applying CPU patch
HI Sir ,
when i Applying CPU patch (7592354) on oracle home version 10.2.0.3 by using opatch napply -skip_subset -skip_duplicate
The below error occurred .
OUI-67124:Conflict with patches in OracleHome detected. Please run OPatch again as
<ORACLE_HOME>/OPatch/opatch napply /tdb1/sadvora/7592354 -id 6397928,6397929,6397937,6397938,6397939,6397942,6397945,6397947,6452863,6650081,6650096,6650105,6667542,6868171,6868172,6868173,6868174,6868175,6868176,6868177,6868178,7154831,7154832,7154833,7154834,7154835,7154837,7154838,7154839,7154840,7154841,7154842,7154843,7369192,7369193,7369194,7369195,7369196,7592354,7604445,7604446,7604447 -skip_duplicateHi;
Please see:
WARNING OUI-67301: "Following patches have conflicts. Please contact Oracle Support " [ID 802459.1]
Critical Patch Update 2011Conflicts with patches in OracleHome: OUI-67124:Conflict with patches in OracleHome detected [ID 1315387.1]
Critical Patch Update October 2010 Oracle Fusion Middleware Known Issues [ID 1159431.1]
Regard
Helios -
Hi,
I am upgrading our EBS 11i database (9.2.0.5.0) to 9.2.0.8.0 by following note : 216550.1 (Interoperability Notes Oracle Applications Release 11i with Oracle9i Release 2 (9.2.0)).
I have installed Opatch 2617419 and then installed 6880880 (p6880880_101000_WINNT.zip) (OUI patch).
While applying Windows patch 6 (5916268) ,using opatch I am getting the following error:
OPATCH_JAVA_ERROR=OPatch Exception while trying to check for Mini Patchset
Cannot check bug/file conflict and component prerequisite checks.
ERROR: OPatch failed during prerequisite check.
OPatch returns with error code = 150
Any help to resolve the issue is appreciated.
I saw note +'OPATCH_JAVA_ERROR=OPatch Exception While Trying to Check for Mini Patchset' while applying patch using opatch 1.0.0.0.x [ID 971783.1].+
There are no '&' in the inventory file. There are a lot of '<'. I dont know if this note is applicable.
Thanks
Thiru.Hi,
I am following section 2 only.
In Section 2, # 7 we have to apply latest Oracle Patching Tool (OPatch) patch 2617419 and in # 8 we have to apply additional 9.2.0.8 RDBMS patches ( in our case it is Windows patch 6.
I am getting issue while applying Windows patch 6 using opatch.
Rgds,
Thiru -
9i and 10g Listener in SUN box How do i stop .while applying the patch.
Hi,
Sun box running - I am having
1. oracle_home 9i Version (database's are running)
My team installed 10g Version 10.2.0.1 in Oralce_home1 there were no database are running in 10g, Now We plan to upgrade into 10.2.0.4 in oracle_home1 while applying patch its asking to stop the listener process.
Is it mean to stop 91 listener or 10g listener?
I had checked the running process in my server using grep -ef
it show all process 9i database's and i find this home1/oracle/product/1020/bin tnslsnr LISTERNER -Inherit. How do i stop ? after applying the patch how do i start?
Is it require down time?
Thanks in advance.
RajasHi
When i check the lsnrctl status it is showing the error , How do i resolve it?
In sun box:
/home1/oracle/pro/920/bin -9i is running
/home1/oracle/pro/1020/bin 10g is running
When i check the lsnrctl status the above oracle home it through error
Connecting to (ADDRESS=(PROTOCOL=TCP)(PORT=1521))
TNS-12618: TNS:versions are incompatible
Thanks in advance
Rajas.
Edited by: Rajas on Sep 23, 2008 8:36 PM -
Work failed while applying the patch 3480000
Dear All,
Please Help
At the phase of applying the patch 3480000 while upgrading from 11.58 to 11.5.10.2
workers failed:
FAILED: file WFXLoad.class on worker 5 for product fnd username APPLSYS.
Time is: Tue Apr 05 2011 06:30:13
ATTENTION: All workers either have failed or are waiting:
FAILED: file WFXLoad.class on worker 1.
FAILED: file WFXLoad.class on worker 2.
FAILED: file WFXLoad.class on worker 3.
FAILED: file WFXLoad.class on worker 4.
FAILED: file WFXLoad.class on worker 5.
FAILED: file WFXLoad.class on worker 6.
FAILED: file WFXLoad.class on worker 7.
FAILED: file WFXLoad.class on worker 8.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.Hi Hussein,
Sorry for being late
next is output screen for patch 3480000
There are now 39641 jobs remaining (current phase=A84):
6 running, 216 ready to run and 39419 waiting.
Assigned: file WFXLoad.class on worker 7 for product fnd username APPLSYS.
Assigned: file WFXLoad.class on worker 8 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 4 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 1 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 3 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 6 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 8 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 2 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 7 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 5 for product fnd username APPLSYS.
ATTENTION: All workers either have failed or are waiting:
FAILED: file WFXLoad.class on worker 1.
FAILED: file WFXLoad.class on worker 2.
FAILED: file WFXLoad.class on worker 3.
FAILED: file WFXLoad.class on worker 4.
FAILED: file WFXLoad.class on worker 5.
FAILED: file WFXLoad.class on worker 6.
FAILED: file WFXLoad.class on worker 7.
FAILED: file WFXLoad.class on worker 8.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
next is last lines in adworker log file
adjava -mx256m -nojit oracle.apps.fnd.wf.WFXLoad -u &un_apps &pw_apps &jdbc_db_addr &jdbc_protocol US &fullpath_cln_patch/115/xml/US_cln2a12os.wfx
Error:
Program exited with status 1
Cause: The program terminated, returning status code 1.
Action: Check your installation manual for the meaning of this code on this operating system.
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 11.5.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"h:\oracle\prodappl\ad\11.5.0\java\adjri.zip;H:\oracle\prodcomn\util\java\1.3\jdk1.3.1_07\lib\rt.jar;H:\oracle\prodcomn\util\java\1.3\jdk1.3.1_07\lib\i18n.jar;h:\oracle\prodcomn\java\appsborg.zip;h:\oracle\prodora\8.0.6\forms60\java;h:\oracle\prodcomn\java"
Calling h:\oracle\prodora\8.0.6\jdk\bin\java.exe ...
Oracle Workflow XML Loader 2.6.2
Connecting to APPS@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=NT4SERVER)(PORT=1521))(CONNECT_DATA=(SID=PROD))) -- UTF8
Connected to (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=NT4SERVER)(PORT=1521))(CONNECT_DATA=(SID=PROD)))
SQL Exception encountered during upload: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'UPLOADOBJECT'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Fatal error encountered during upload between line 10 and 35
Error encountered when upload.
AD Run Java Command is complete.
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Apr 05 2011 06:30:13
Thanks&BR
Tarek -
Error while apply oracle patch 10.2.0.4
hi..
i am applying oracle patch 10.2.0.4 on my Production system , it generating error
E:\oracle\R3D\102\OPatch>opatch apply
Invoking OPatch 10.2.0.2.0
Oracle interim Patch Installer version 10.2.0.2.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home : e:\oracle\R3D\102
Central Inventory : C:\Program Files\Oracle\Inventory
from : n/a
OPatch version : 10.2.0.2.0
OUI version : 10.2.0.2.0
OUI location : e:\oracle\R3D\102\oui
Log file location : e:\oracle\R3D\102\cfgtoollogs\opatch\opatch-2009_Apr_29_13-3
5-37-PKT_Wed.log
ApplySession applying interim patch '7715057' to OH 'e:\oracle\R3D\102'
Apply Session failed: ApplySession failed to prepare the system. ApplySession: R
equired component(s) [ oracle.rdbms.rsf, 10.2.0.4.0 ] not present in the Oracle
Home or a higher version found.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code = 73
plz guide me , how can i resolve that issue
Regards
ImranHi,
why people do not read even the web sites
to download the patches you fo to the page
http://service.sap.com/oracle-download
there it says:
ORACLE
General Information
This area in the SAP Support Portal is designed to download Oracle patchsets, patches, scripts etc. Information on how to download Oracle patches can be found in SAP Note 509314.
The answer to your question is on the mentioned note "[509314|http://service.sap.com/sap/support/notes/509314]" -
The final_patching_report.log is showing as follows:
----------START OF PATCHING REPORT------------------
* BIAPPSSHIPHOME Patching Report ..........
Patch Succeded: fsclite_rel7mlr2_16424872.zip
Patch Succeded: BISHIPHOME_11_1_1_7_0_GENERIC_130409_1210_16492220.zip
Patch Succeded: atglite_rel7mlr5A_database_16239380.zip
Patch Succeded: atglite_rel7mlr5_16480022.zip
Patch Succeded: fsmlitedb_rel7mlr2_16424869.zip
Patch Succeded: fsmlite_rel7mlr2_16424870.zip
Patch Failed: BISERVER_11_1_1_7_0_WINDOWS_X64_130326_2045_4_16583998.zip
Patch Failed: BIFNDN_11_1_1_7_0_WINDOWS_X64_130322_1000_5_16462147.zip
* Oracle Common Patching Report ..........
Patch Failed: p16433147_111170_Generic.zip
Patch Failed: p16080773_111170_Generic.zip
Patch Failed: Webservices_Patch-3-PS6RC3_bug-16487786.zip
Patch Failed: p16433036_111170_Generic.zip
Patch Failed: JDEVADF_REL7MLR10-RT_16525527.zip
Patch Failed: WebCenter_BP1REL7RC3_16311963.zip
Patch Failed: fmw_diagnostics_14757820_2.zip
Patch Failed: SOACOMMON_REL7B8_16438735.zip
* SOA Patching Report ..........
Patch Failed: SOA_REL7B8_16438735.zip
* ODI Patching Report ..........
Patch Succeded: p16629917_111170_Generic.zip
* Weblogic Patching Report ..........
----------END OF PATCHING REPORT------------------
The biappshiphome_win64_patches.log output:
Oracle Interim Patch Installer version 11.1.0.9.9
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home : C:\MiddlewareHome\Oracle_BI1
Central Inventory : C:\Program Files\Oracle\Inventory
from : n/a
OPatch version : 11.1.0.9.9
OUI version : 11.1.0.9.0
Log file location : C:\MiddlewareHome\Oracle_BI1\cfgtoollogs\opatch\opatch2013-07-09_15-31-18PM_1.log
OPatch detects the Middleware Home as "C:\MiddlewareHome"
Verifying environment and performing prerequisite checks...
Prerequisite check "CheckActiveFilesAndExecutables" failed.
The details are:
Following files are active :
C:\MiddlewareHome\Oracle_BI1\\bifoundation\jlib\securityservice-api.jar
C:\MiddlewareHome\Oracle_BI1\\bifoundation\jlib\common.jar
C:\MiddlewareHome\Oracle_BI1\\bifoundation\jlib\securityservice.jar
Log file location: C:\MiddlewareHome\Oracle_BI1\cfgtoollogs\opatch\opatch2013-07-09_15-31-18PM_1.log
OPatch failed with error code = 73
Similar output in oracle_common_generic_patches.log.
There is no output for Weblogic Patching Report.
Thanks,
NeerajHi Niraj,
in which method your going to install the OBIEE i.e in the Enterprise installation mode or software installation mode. have u edit the apply platform patch file. will you let me know content in the files.
Thanks,
Yogi. -
Hello Everyone,
I am new to OBI and specially new to 11g, Now most of you guys will know that there was a bug in 11g in which if you want to see the query generated by the report in session log, It shows "no log found". Now there was a patch available which i have downloaded and i am not so sure as to how to apply that patch to OBI, I tried all the steps given in the read me doc provided with the doc. but all in Vain, as it is very confusing and more importantly it doesnt work,
Can any one help me out here by telling me the actual steps involved.
Thanks,Try the following -
1. cd to oracle home folder\opatch
set oracle_home=your home directory (iethe parent of opatch\ folder)
opatch lsinventory -patch -detail
The last command should run and say "opatch successful".
Now run the command:
2. opatch apply -verbose "your patch folder's complete path"
(verbose tells u the sequence, success or errors if any)
OK - now,
3. The patch on my PC failed saying that I needed to install the latest opatch. I downloaded the latest opatch (11.2 even though the patch (ie the "no log found" patch) requires 11.1.0.8.2 or something) and just extracted it to the oracle home folder - yes, it will overwrite the current opatch folder, so back it up before you copy the latest opatch folder.
4. After this, I ran the command again from step 2 again. It seemed to be running, ie somewhat successful, but it asked for my oracle support login, some proxy server crap so it could connect to the internet, also gives options to specify "NONE" if you didn't need all this - but never came back...at that point, I quit. I tried again and it got stuck at the same point - so, I wasn't sure if it succeeded or not.
5. I assumed the patch ran OK and tried to view the log - but this time it gave a different error "it is not a Win32 application" or something like that. I am sure that I downloaded the win32 patch only. Yet, I am going to check and try it out again tomorrow.
Let me know if it worked for you and the details.
Hope all this helps :-)
Maybe you are looking for
-
Having a problem with audio in DVD Studio Pro with the finished copy
I am making a DVD of a clip I had transferred from a mini DV. All the audio was present when I transferred it. I had then turned it into an MPEG movie format (.mpg). When I play that clip there is audio. Then I compressed the file on Compressor. I se
-
Hi guys This is Raj and working with MI and MAM in specefic. In order to map the cusotmer extended view files and standard view description files, do we need to create our own "view.configure" file because the war file does not have view.configure fi
-
Urgent: Displaying image in JSPPAge in Abstract Portal Component.
Hi all. In my application, i need to display the image in a table cell. My JSP page is under dist\portal-inf\jsp\ and my image is under dist\images\. I am calling the image from my page using <td> <image src = "..\..\images\image.jpg"></td> and i
-
Java.sql exception for rs.nesxt() ( nested statements)
I have a problem with java.sql.I am getting an Invalid handle exception for nested result sets ... example:- //Conn is the common connection Statement s1 = conn.createStatement(); rs1 = s1.executeQuery(query1); while (rs.next){ Statement s2 = conn.cr
-
Hai Respected Friend Sorry for posting this doubt in this site because this not a JSF related Question. I have some doubt regrading Web Page working fast . Actually some website is working vary fast while some one is not . please let me know normally