Applying a stylesheet to ITS through portal

Hi folks.
I'm really struggling here with a thing that seems to be so easy. Have searched SDN for a day or two without finding the answer.
How do I apply a generated stylesheet to the ITS 6.40?
If I use the ITS Theme Generator I get a preview window where nothing is changed. It should be green colors according to the style sheet I selected but are blue (standard SAP ones).
I anyway press the Generate button and nothing really happens but there is no error message anyway.
Is this how it should be and what do I do from here to actually apply the generated stylesheet to all of the IACs of the ITS !?
When reading about ITS Theme Generator I have understood that it is a PREVIEW window. But if it is - why is my stylesheet not incorporated in the preview window.
What can I do?
Any help HIGHLY appreciated.
BR
Mattias

Hi Kiran,
Let's discuss the problem here:
Uniform look and feel in Portal as well as Browser with Internal ITS!
I close this thread now because it might get chaotic if we discuss the same issue in two different threads.
Best regards
Henning

Similar Messages

Urgent: Issue while accessing MSS through portal

Hi All,
Recently HRSP 70 was applied to R/3 system. And after that we are getting scenario does not exist when clicked on MDT->Reporting->choose report e.g. Education->Select people -> and start report through portal.
And we got Scenario does not exist error.
We referred HRWPC_FC_EXEC error and applied following settings :
For service: sap/bc/gui/sap/its/hrwpc_fc_exec
1) Go to GUI Configuration and set the following parameter
    Parameter name: ~webgui_theme
    Value: sl
2) Then go to transaction SITSPMON -->Template and Mimes tab
    Invalidate template caches
After this what is happening is a bit wierd though a workaround is found.
Now when user clicks start report through portal he gets a popup for SAP inbox mentioning there are xx documents unread, if he clicks on ok he again gets "scenario does not exist" . However if he goes and reads all the documents in inbox and then again execute start report through portal he can see the desired output.
Now still if we just go to sicf transaction in R/3 and just right click on HRWPC_FC_EXEC and execute Test Service we still get Scenario does not exist
Also note we have reports iview with MSS1 scenario and viewgroup in Selection Criteria is a Z group
Where in R/3 side should these entries be maintained ?
Can anyone please suggest what would be the connection of unread documents here with scenario ? And where is scenario missing ? Kindly let me know if any other input is needed.

Hi Joyce,
Yes we were able to resolve it, we added one more parameter "NO_LOGON_USEREXIT" with value "1" in GUI configuration of the service "HRWPC_FC_EXEC". This resolved our issue.
Try it at your end , let me know if any issue.
Regards,
Jalpa Shukla(Bhatt)

User is locked in R/3 but still access the application through portal

We are currently on NW2004s SP10 .
We locked the User A in R/3 SRM backend system and from Enterprise Portal the same User A login and try to access the SRM application in backend . The system is allowing to access which we want to prevent .
The authentication ticket type is "SAP Logon Ticket" . The User A is trying to access ITS services through Portal.
Do we have specific SSO parameter which needs to set in backend SRM application .
Thanks
Chandrashekhar K

Hi
We have maintained the following profile parameter for SSO in our SRM system . From portal we are accessing the SRM system
login/accept_sso2_ticket          1
login/certificate_request_ca_url     https://tcs.mySAP.com/invoke/tc/usercert
login/certificate_request_subject     CN=&UNAME, OU=&WPOU, O=mySAP.com User, C=DE
login/create_sso2_ticket          0
login/disable_cpic               0
login/disable_multi_gui_login          0
login/disable_multi_rfc_login          0
login/disable_password_logon          0
login/failed_user_auto_unlock          0
login/fails_to_session_end          3
login/fails_to_user_lock          3
login/isolate_rfc_system_calls          0
login/min_password_diff               1
login/min_password_digits          0
login/min_password_letters          0
login/min_password_lng               6
login/min_password_specials          0
login/multi_login_users               HP
login/no_automatic_user_sapstar          1
login/password_change_for_SSO          0
login/password_charset               1
login/password_expiration_time          60
login/password_logon_usergroup
login/password_max_new_valid          0
login/password_max_reset_valid          0
login/system_client               400
login/ticket_expiration_time          60
login/ticket_only_by_https          0
login/ticket_only_to_host          0
login/ticketcache_entries_max          1000
login/ticketcache_off               0
login/update_logon_timestamp          m
Please suggest as to change any parameter value . We want to restrict the user to access SRM system from portal if he is locked int e SRM system.
Thanks

SSO to ITS through WebSEAL gives secure/non-secure messages

Hi
We running the following setup:
EP6 SP14
Stand-alone ITS 6.20 patch 18
4.7 R/3 Enterprise
TAM/WebSEAL 5.1
We are running SSO through WebSEAL to the portal and everything seems to be working just fine.
But when we try to access a transactional iView or an IAC iView running on the ITS server I get a pop-up message saying "This page contains both secure and nonsecure items."
We are accessing WebSEAL through HTTPS, we are running HTTPS between WebSEAL and the portal and HTTP between WebSEAL and ITS.
I have tried to access the ITS through WebSEAL without using the portal, and I still get the message. So it must be something between the WebSEAL and the ITS server.
Does anybody have any ideas what is causing this?
Cheers,
Jacob Vennervald

The "secure and non-secure" message, displayed when accessing ITS through WebSEAL when using IE and HTTPS, is caused by an empty source reference (<IFRAME ... SRC="" ...>) within the ITS menu page (...d_menu.html).
The integration guide, available on the <a href="http://www-1.ibm.com/support/docview.wss?uid=swg24003605">IBM website</a> and the <a href="http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/ibm">SAP SDN</a>, contains the information on how to stop the message from appearing.
The message should not be displayed when accessing ITS through WebSEAL using HTTP.
Regards,
Peter Tuton.

DMS Document access through Portal

Hi Sap Gurus,
we are in the process of integrating SAP DMS with Enterprise portal 6.5, and SAP DMS on 6.0 SP 12, ie the latest Version,
when we try to access or view the documents in Portal, we could only see those which have been maintained through Easy DMS, ie.. the folders and documents created in EDMS only is visible
The Documents which are created in normal DMS, ie the document types and all the documents are not visible in Portal view. any one who have seen or managed DMS through Portal let me know can we see all the documents through Portal or only those maintained in Easy DMS,
can we avail all the funtionality in Portal to manage the documents just like we do in DMS. what are its limitation.
Pointa awaiting
Thanks and regards
Priya S

Hi,
The Kpro Tick is been given to all the document types i have configured,
i dont know if i have to enable any other KPRO feature apart from this,
if any one have made DMS and Portal integration, please let me know is Portal access is only for Document maintained by Easy DMS, or it is for all the documents of DMS, (is there any note to be implemented to avail this feature)
also we are planning to have Trex search engine for Portal file search, can this same Trex be used be for searching files inside DMS also.
Points eagerly awaiting.
Regards
Priya S
Edited by: Priya S on May 6, 2009 12:59 AM
Edited by: Priya S on May 7, 2009 10:41 AM

How to Set the Visibility of a field in ESS Address view through portal

Hi experts,
I want to set the visibility of a field in ESS Address view through portal.How to edit a field through portal? Please help me with procedures to be followed..
Thanks&Regards,
Karthik.

Hi,
Login to portal with a user having content administration role.
Navigate to your iview which must be under content provide by SAP(if its a standard iview).
Open the iview and click on preview button.
Then press ctr on keyboard and rightmouseclick on the field for which you want to change.
A popup will open. Change the visibility in the popup and save the changes. This is a way of personalization and it'll be applicable for all the users.

Sent an email while updating bank details through portal

Hi Experts,
I have an issue with EP portal.
when i change the bank details through portal its updating in info type 0009(bank details).But i have to send a mail while updating.
Can any one please suggest me how to do this.
Thanks & Regards,
Sujatha sahu.

Hi Experts,
I have an issue with EP portal.
when i change the bank details through portal its updating in info type 0009(bank details).But i have to send a mail while updating.
Can any one please suggest me how to do this.
Thanks & Regards,
Sujatha sahu.

Error applying XSL stylesheet to XML

Hi,
after installed SPS 21 into portal we are facing an issue:
A contentadministrator wants to publish a new newsfact in portal, but get the following error message:
Error applying XSL stylesheet to XML:
com.sapportals.wcm.WcmException: com.sap.engine.lib.xml.util.NestedException: Variable '$system_config_activateClipboard' has not been bound to a value
     at com.sapportals.wcm.service.pipeline.Pipeline.handle(Pipeline.java:284)
Hope that somebody can give me some help.
thanks a lot in advance.
Regards,
Edwin

Hi Lorcan,
You help solved our issue, thanks a lot.
After generate the existing xml project with the Forms builder in the Content Management,
the contentadministratoris able to produce a new newsfact without errors
Regards, edwin
Posts: 123
Registered: 11/29/04
Forum Points: 346
Solved problem (10)
Very helpful answer (6)
Helpful answer (2)
   Re: Error applying XSL stylesheet to XML
Posted: Apr 19, 2010 11:13 AM    in response to: Edwin Theuns           Reply
Hi Edwin,
You need to recompile the xml forms project and that should resolve the issue. Unfortunately there is no alternative solution in such a scenario.
Regards,
Lorcan.

How can i apply maxlength constraint on TextField Through JavaScript ?

How can i apply maxlength constraint on TextField Through JavaScript ,
when i am adding the row dynamically & adding the textfield dynamically into it . I can set its attributes like name, size, focus & else, But why its not setting maxlength attribute through javascript ?
If any body is fammiliar with this problem Please answer the question.

Hi Ashoka,
here is the code to get the length of the test field. then you can set your own textfield restriction. I hope this what you are searching. or else you can set the max length of the text field in HTML tag itself it is very easy.
HTML : <input name="textfield" type="text" maxlength="25">
JAVASCRIPT:
<html>
<head>
<title>mAX tEXT <title>
<script>
function maX()
     var data = document.form1.textfield.value
     len = data.length
     alert("Max Value "+len);
     return true;
</script>
</head>
<body>
<form name="form1" method="post" action="">
<input name="textfield" type="text">
<input type="button" name="but" onClick="return maX()">
</form>
</body>
</html>

TableView LINEEDIT works differently when viewed through Portal

I have a simple table with a few columns of data that I display and allow the user to change a row using the selectionMode = "lineedit". The columns are all controlled using htmlb tableViewColumns.
When I test my application from the WebAs the table looks fine. If a user selects a row they can see the entire amount of text that appears in a column they want to change
However, when the BSP comes up in our SAP portal and the user selects a row only the first 20 (or so) characters can be seen and the user must use the arrows keys to get to the part of the text they wish to change. Is this a setting somewhere?

For the <htmlb:inputField> look at attributes maxlength, size and width.
<b>width:</b> Determines the text width for the input field. We recommend that you use the size attribute instead of width.
<b>size:</b> Determines the size of the input field.
<b>maxLength:</b> Maximum length of the user input.
I must admit that this documentation is not tell me enough. Will ask on Monday about this.
As for your remark "works differently when viewed through Portal": You keep in mind that once a BSP application is running with the portal, all stylesheets (*.CSS) files are loaded from the portal server, and not the webAS.
Now it could happen that you are running an EP and an older (or incompatible) patch level than your BSP stylesheets are at the moment. For EP6, starting from what I remember at SP11, there is planned a technique to install the latest stylesheets from service market place. You ask about this via OSS, queue EP-PIN-?-STY (something like this).

Accessing windows explorer through portal

is it possible to access windows explorer through portal. or is there a way to access the files in the computer thro portal. i mean something similiar to windows explorer.
can we access windows explorer itself or we need build an application for this. can someone give me an idea on this. its urgent.
regds
Rajesh

Hi Sharmila,
a. Access through Windows Explorer. User should be able to do all required operations related to document handling through Windows Explorer (Check in, Check out, etc.). all these must be done thro portal.
b. Integration with MS Office and other popular softwares like Visio, MS Project, etc. User should be able to open, save, check-in, check- out document from within these applications. the corresponding file when clicked should open in ms office or word with all the tool boxes enabled.
c. allow the users to categorize the document repository to different categories.
d. should support versioning of the documents.
e. should have predefined user levels / category.
plzz look into this , say me which is possible and which is not possible. Thanks in advance
regds
Rajesh

ITS through Reverse Proxy : Only POST method doesn't work

Hi all,
We are using an Apache Reverse Proxy infront of our Portal and ITS Server
and using https.
Reverse Proxy : 443 > ITS:8443
We have rewrite rules for /sap and /scripts (ITS) /irj (portal) in the
Reverse Proxy .
We have set the following variables through the wgate-config URL of the
ITS server (SetHeader) :
HTTPS on
HTTP_HOST proxy_server:443
All ITS Iviews that use GET mehod display correctly .
However all ITS Iviews that use POST create an Apache Proxy Error.
We believe this is due to HTTP_CONTENT_LENGTH not being set in the ITS .
Do we set this value the same way?
Are there any other ITS settings that would cause this error for POSTS in
a Reverse Proxy ?
Regards
Daniel

There is a way around this (thanks to apple for responding to my bug submission) but it's slow. Test to see if the glyphCode created is greater than zero or not:
final FontRenderContext fontRenderContext = new FontRenderContext(null, false, false);
char[] array = new char[1];
array[0] = (char) intvalueofchar;
GlyphVector glyphVector = glyphFont.createGlyphVector(fontRenderContext, array);
int glyphCode = glyphVector.getGlyphCode(0);
boolean validchar = (glyphCode > 0);I only need to do this on the mac; on windows it does the right thing without this. If anyone has any suggestions for speeding it up (I already have it running in a thread), that'd be great - but thought I'd post it here for anyone else who might run into the same problem some day.

Error message in BW Report through Portal

Friends,
I really need your help to remove the waring message.
For the purpose of changing the description on the Selection screen from Cost Cetnters (Authorised Values) to Funds Centers I had changed the ZCCTRATI variable description to Funds Centers
Issue:
When we open the old report we see the following information message.
" Value if variable ZCCTRAT1 is automatically converted
I did go to TC RSRT as of Dinesh,Vijay advice ,Just want to know that what message i need to Click .because i could nt find the relevant message
Can u help me how to remove this ?

Bhanu,
Thanks for u r reply.This warning message appears every time i execute the report through portal.
Any idea ?
Regards
Mano

Authorization problem to execute a report through portal

Hi All,
One of user while trying to execute report through portal, getting error message saying that
"you are not authorized to execute the report XXXXXXX'
Can not load query <query name> (data provider <data provider name> No authorizations for requested service.
The report is a web template which is getting executed through portal.
User is having all the authorizations to execute the report(report autho as well as infoprovider autho also)
we have regenerated the user roles , done user comparision....every thing is OK.
Still unable to execute the report.
Please advice what can be done in this case....
Regards

Hi Shaik,
Are you able to run this report with your user id?
If so check the role or authorization objects which are missing to the user.
And also check whether he got portal roles assigned to his profile.
Regards,
Ravi Kanth
Edited by: Ravi kanth on May 12, 2009 2:06 PM

BI report through portal

Hi,
I am trying to create a iView to access the BI report through Portal.
We have done SSO and other configuration.
While previewing the iView I am getting the following error.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Could not find portal application com.sap.ip.bi.service.generic.
Exception id: 08:17_28/07/08_0024_4848350
See the details for the exception ID in the log file
Any idea ???
How to check log files ??
Regards,
Niraj

Hi,
Check these.
http://help.sap.com/saphelp_nw04s/helpdata/en/a3/7b583c2439e66fe10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a
/thread/826292 [original link is broken]
/message/3945089#3945089 [original link is broken]
Configuring EP for connecting to BW
Regards.

Applying a stylesheet to ITS through portal

Similar Messages

Maybe you are looking for