Applying a theme to a project.

After saving a theme I like, to use later, I can't understand how to apply that saved theme to a new project.
Thanks for your help.

It's easy. See: Saving a customized theme as a favorite at http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6728.html

Similar Messages

  • Why do I get an error when I try to apply a theme?

    For some strange reason, the theme that I created, does not want to apply to some of my projects.  I'm working on a work project, and updated my theme as I went along.  It was all fine, until I changed the Object Styles, and suddenly, out of the 7 project files I have, 3 of them wouldn't apply.  It would reach the end of its application (the little blue loading bar) and then would pop up with an error.  See below;
    Like I said, it's only done it for 3 of my projects.  I also have tried applying other themes (the default ones) to the project, and they didn't work either.
    I have already searched the forums and found a question that was the same as this, but regarding Captivate 7.  I tried the solution that was offered there, and it didn't work.  Link to that particular one is below;
    Can't apply a new theme to Captivate 7 projects
    I'd appreciate a bit of help with this, because it's got me completely mind boggled, and it's urgent as well.
    Thanks.

    What was your work flow to save the theme?  I think you are referring to the Blank theme (there are no templates coming with Captivate)?
    Colorful 2015 with Adobe Captivate - Captivate blog
    Theme Colors - Captivate blog
    Both articles talk more about the new Theme Colors feature, but maybe?

  • Some photos pulled from iPhoto turn green when placing them in a project. Is there any way to fix this?

    I am using a Macbook Pro with 2GHz Intel Core i7 processor; 8 GB 1333 MHz DDR3 memory and OS 10.9.4. I have iPhoto 9.5.1 and iMovie 10.0.4. I have a project with video, and have added some still photos from my iPhoto Library. All of the photos appear fine until I add them to a project. Then some of them turn to a solid green. If I create a mp4 from this project, the offending photos remain green.
    I have checked the offenders in iPhoto to see if there is a common denominator. There is no common camera and no common editing. I did make a previous attempt to place some of the photos into an iMovie project and some of them were dropped into the wrong place--like into a title. But didn't notice any glitches at that time, only afterwards and I'm not sure if any of the problem photos were a part of that incident.
    I have absolutely no problem with iPhoto. Is there a library file that can be deleted to force iMovie to rebuild its connection to iPhoto.

    Only to load your backup from before downloading the MM photos
    LN

  • Is it possible to have media files copied to a new location as you import them into a project?

    I have roughly 800gb of footage i've taken over the past 2 years of traveling, and I am making a single video montage... The files are located on an external drive, making them slower to work with. I have a 1tb ssd but not enough free space to copy all the files to it for sorting. What i want to do is have the files copy over to the SSD as i add them to the project, so that only the footage i'm going to use gets copied over to the SSD. The only way i can determine if i am going to use the footage or not is to scrub through and mark Ins and Outs in premiere...
    So i guess my question, in the simplest terms i can ask is, Is there a setting in Premiere, like the project manager tool which allows you to consolidate used media files to one destination, but one that will consolidate files as you add them to the project? or could i do this manually by repeatedly using the project manager tool to consolidate files periodically?
    Hope that makes sense...
    Oh, and yes, i have considered other methods to my madness, like reviewing the footage outside of premiere before deciding if i will use it or not, frankly, i have over 4000 pieces of footage and it's just much faster to scrub through them in premiere than to open each one in vlc to review. It's also much more convenient to mark my ins and outs as i review the footage, so premiere is my only option.
    Thanks!

    You can easily (and better, IMHO) do what you want in Adobe Prelude.  It's part of the CC subscription, and may have been included with CS6.
    Open the Ingest panel, navigate to the external drive where you have your source clips, make the thumbnails in the Ingest panel comfortably large, click a video clip to enable scrubbing, and use the J-K-L keys to navigate playback through the clips.  Put a check mark on the clips you want and be sure to select and set up the Transfer option on the right side of the panel before ingesting.  Don't select the Transcode option.
    Cheers,
    Jeff

  • My table of contents does not use the entry style I select for words in the paragraph that have character styles applied to them in the chapter, so some of the letters are showing up as green, which is fine in the chapter but not in the TOC.

    My table of contents does not use the entry style I select for words in the paragraph that have character styles applied to them in the chapter, so some of the letters, specifically parameters, are showing up green, which is fine in the chapter but not in the TOC. I can manually fix this in the TOC by changing the character style to none after the toc  has been generated, but I don't want to do this.

    What application are you running? Please ask this in the forum of the product you're using.

  • 1 new update have been added to the project would you like to close the project and apply these updates message in project 2010

    1 new update have been added to the project would you like to close the project and apply these updates message  in project 2010.
    One of the PM is getting above message and not any recent changes happened?

    Hi,
    This message appears when an update has been sent for his approval and is pending. It could happen while opening the project plan, or when clicking on something like "retreive tasks updates" from the backstage menu of MS Project Pro.
    The PM should go to his approval center and check for any approval pending.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • Notifications are not being generated for any emails that have rules applied to them.

    Notifications are not being generated for any emails that have rules applied to them. Any clues how to fix this?

    In System Center 2012 Operations Manager, the alert notification will be sent when the alert first meets all criteria, regardless of resolution state, unless resolution state itself is a criterion. If alert suppression is enabled for the rule or monitor
    that raises an alert, only one notification will be sent when the subscription criteria are first met. No additional notifications will be sent until the alert is closed and a new alert is raised that meets all subscription criteria.  PLease check
    1) whether your rule has trun on alert supression
    2) Close the alert, craised by rule,  and do it again
    Roger

  • In powerpoint mac 2008, how do i apply a theme to a single slide without it changing other slides' themes in the powerpoint?

    In powerpoint mac 2008, how do i apply a theme to a single slide without it changing other slides' themes in the powerpoint?
    <Edited by Host>

    As PowerPoint is not an Apple product (a lot of Mac users avoid Microsoft stuff) you may get faster and better help by using the MS Office:Mac forums here:
    Office for Mac forums

  • I filmed several takes of the same scene for a movie. I trimmed the best clips from each take and put them into the project screen. However, I can't figure out how to make it flow seamlessly as one scene. Can someone please help me??

    I filmed several takes of the same scene for a movie. I trimmed the best clips from each take and put them into the project screen. However, I can't figure out how to make it flow seamlessly as one scene. Can someone please help me??

    1-800-676-2775  apple support   tech support 1 800 275 2273
    If your computer is on one minute before it freezes, than you have one minute to secure your serial number.
    click the apple----->click about this Mac ------> click on version----> until you see the serial number.  You may have to do this a couple of times if it freezes before you have all the numbers.  A camera might help.
    Good Luck

  • Applying Style Sheets to all Project Topics

    Currently I have topics that use different style sheets (there are 5 listed, although I only created one).
    I want all topics to use the same style sheet.
    Is there any way to apply a Style to all Project Topics?

    Welcome to the forum.
    Go to the topic list and select all topics, then right click and select Properties. You can assign the new CSS there. Any style names in your topics not included in the new CSS will of course be broken and need to be assigned to whatever style you choose.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Apply custom themes to WebDynpro ABAP application in Portal

    Hi,
    We have just upgraded the E-Recruitment to EHP4. We have two instances of ECC in which one acts as HR instance and the other one for E-Recruitmet. We have created custom themes for portal and need to apply the same for the WebDynpro ABAP applications for E-REcruitment. I have downloaded the theme and from portal and uploaded the same in MIME folder using SE80 transaction. I have also added the parameter sap-cssurl=/sap/public/themes/<my custom theme folder name>.
    Also tried giving the url in application parameter as
    SAP-EP-THEMEROOT=http://<hostname>/irj/portalapps/com.sap.portal.design.portaldesigndata/themes/portal/customer/<custom theme>
    Is there any other way to apply themes for WD ABAP applications. I dont want to customize the standard applications and just want to apply the themes.
    Any suggession on this is highly appreciated.
    Kind Regards,
    Vivek.

    Hi,
    to create theme for webdynpro abap application, use Eclipse Plugin.  Please remeber to check the version of theme file before using theme.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10d5ef40-465e-2c10-9ca9-f548bfc3f236
    setup custom theme for webdynpro abap application.
    FEATURED EVENTS
    Regards
    Baby

  • Apply custom themes to WebDynpro application in Portal

    Hi,
    We have just upgraded the E-Recruitment to EHP4. We have two instances of ECC in which one acts as HR instance and the other one for E-Recruitmet. We have created custom themes for portal and need to apply the same for the WebDynpro ABAP applications for E-REcruitment. I have downloaded the theme and from portal and uploaded the same in MIME folder using SE80 transaction. I have also added the parameter sap-cssurl=/sap/public/themes/<my custom theme folder name>.
    Also tried giving the url in application parameter as
    SAP-EP-THEMEROOT=http://<hostname>/irj/portalapps/com.sap.portal.design.portaldesigndata/themes/portal/customer/<custom theme>
    Is there any other way to apply themes for WD ABAP applications. I dont want to customize the standard applications and just want to apply the themes.
    Any suggession on this is highly appreciated.
    Kind Regards,
    Vivek.

    you can try these links for adding Themes to a Web Dynpro Application ... You can create your own theme with your company logo ... Optionally there are a few sample themes available ..
    1) http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d2b1d790-0201-0010-25b7-d1fb059a8ad9?overridelayout=true&quicklink=index
    You can check this link below in which they have discussed about adding themes to the WD application ..
    2)Re: Want Colorful WebDynpro Theme to download
    For portal themes you have already applied it but still
    http://help.sap.com/saphelp_ep60sp2/helpdata/en/1a/d7c1617dd29e4d85064b467636fada/frameset.htm
    this link might help .

  • Apply Custom theme to Web Dynpro Java CE 7.11

    Hi,
    I want to apply a custom theme created with the theme editor to my WDJ application. The creation of my custom theme seems to be no problem.
    But I did not find any documentation how to apply this theme to my WDJ app.
    How to deploy this theme (zip-File) to my AS Java (CE 7.11) ?
    How to set this theme as used theme for my WDJ app only?
    How to set this theme to be used by my app running stand-alone and running in portal?
    Thanks ahead,
    Bernd

    Bernd,
    You can deploy your theme by going to
    System Administration->Portal Display->Theme Archive, on the screen under the Import Theme section, browse the theme and import.
    In order to apply the theme to your WD application, you can get the info. here:
    https://cw.sdn.sap.com/cw/docs/DOC-100896
    also note that, by default WD application will take the portal theme unless you configure to use a specific theme as described in the above link.
    For applying the portal themes, you have to create a framework page and a new desktop.Add that framework page and the theme to the desktop and then create a desktop rule which gives the look and feel of that desktop(theme and the framework page) who satisfy the condition in the rule.
    Regards,
    Ajay

  • I have iMove 11 and photos turn very dark when I drag  them into the project. Changing colour white balance does not fix the problem.

    I have iMove 11 and photos turn very dark when I drag  them into the project. Changing colour white balance does not fix the problem.

    Thanks for your no help line.

  • Option to move files rather than to copy them in "consolidate Project"

    The option to move files rather than to copy them in "consolidate Project" seems to be missing in LPX. Bummer. Am I missing something?

    Hello Darlene.
    I don't know if this is what you want, but you may try configuring your applications screen to handle specific file types in a way you prefer:
    https://support.mozilla.com/en-US/kb/Options+window+-+Applications+panel

Maybe you are looking for