Applying color corrections to the original video clips?

How do I apply the same colour corrections I have made to video clips in PremierPro CS5.5, to the original video clips? Is there a way to save the clips from PremierPro to apply the same changes to the original avchd clips?

You would have to export with the correction applied.
These become "Intermediates"

Similar Messages

Apply color correction to the sequence, not clip

Is it possible to select all clips in the sequence, then apply color corrector, or brightness/contrast filter _with a specific setting_ to the whole sequence?
Currently when I select all in the sequence, apply a correction through effects > video ... etc, then change a setting, it will only change the setting one clip from the sequence.
I know it is possible to work around this and do it with one clip and then paste attributes, but if there's another way, please let me know.
Thank you!

Michel,
That's a great idea, why didn't I think of that? Thank you for your fast reply, I got it near instantly on the iPhone and was laughing at how simple and smart a solution you had!
Cheers,
Roman

HT4589 Is there a recomended way to delete proxy and optimized clips once a project is completed and is ready for archive? also, can proxy and optimized clips be removed (to save space) once a project is ready for color correction and the original clips a

Is there a recomended way to delete proxy and optimized clips once a project is completed and is ready for archive? also, can proxy and optimized clips be removed (to save space) once a project is ready for color correction and the original clips are used

No, they are NOT the same as proxy or optimized.
When you add a clip to your timeline and, say, apply an effect to it, or superimpose a title on the clip, FCP X has to make many calculations to determine what color each pixel of each frame should be. If a section of your timeline is not rendered, it has to do all these calculations every time you play those frames. A render file has the frames already "calculated", so it plays fast and smoothly.
For simple compositions and a fast computer, you may avoid rendering completely - and you may also choose to only render the portions where playback stutters.
Render files can be safely deleted. FCP X can recreate them if needed (either automatically if you have "background render" on, or on demand, when you select the "render" or "render all" commands).

HT4640 Adding a video clip to a keynote presentation - do I have to keep the original video on the camera roll?

I have several keynote presentations that are missing their video clips. Does the original video clip need to stay on the camera roll after you embed it in the presentation? I thought not, because when you add a video, a message comes up saying "compressing video" before it gets added. That made me think that a special compressed version of the original video is made and saved along with the presentation. I've tried testing this by creating a new presentation, adding a video clip to it and then deleting the original video from the camera roll and the video clip in the presentation was not affected. You'd think if the clip were linked to a presentation, that iOS would warn you before you delete it from the camera roll. But I can't think of any other reason why the clips would suddenly be missing from all my keynote presentations.

You can do this with iMovie '06, but not with iMovie '08. You should have iMovie '06 still on your hard disk if you upgraded from iLife '06, or you can download it for free from Apple. Under Editing -> Video Effects, you will find the Fast/Slow/Reverse effect that will do this.

Apply Color Correction to next clip

I'm pretty sure I was able to do this about a month ago. I originally found how to do it in the help index, but I cannot find it now.
I'm looking to apply my color correction to the next clip in the timeline. Just like in FCP7, you were able to apply it to the two (or one) clips behind or in front of the clip you're using the CC from.
Thank you.

We don't have the same privelidges in this area that we enjoyed in FCP7.
The best you can do is select the corrected clip and hit Cmd+C to copy it.
Then select the clips you want to apply the same correction to and press Alt+Cmd+V to Paste Effects.
Note:
If you already have any effects on those clips, they will be overwritten.
Andy

How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

If you have either iMovie 09 or iMovie 11 you can do this easily using the Cutaway feature.
Go to iMovie/Preferences and make sure that the Advanced Tools are enabled.
Now you jut drag and drop the 2nd clip onto hte first clip at the frame where you want the Cutaway to start. A popup menu will appear. Choose Cutaway.
Here is a good Tutorial.
If you have iMovie 08, let me know. There is a way to do it, but it is more complex.

Why is the video in the preview af lower quality than the original video?

I have a question about the quality of the video seen in the preview. This is not as good as the original and also not as good as the original video seen with fe mediaplayer.
I already read some similar discussions and I have tried some things:
Starting a new project with other settings (PAL HD 1080i, 25fps), this does not help.
Rendering the video if necessary, this does also not help.
Some information:
The video's are from a PanasonicHDC-SDT750 full HD camera. Setting 1920HA.
Output files are MPEG imagesize 1920x1080, 25 fps, 48 kHz
Computer: Inte(R)l core (TM) i7-3632QM CPU 2.20 GHz 8 Gb RAM
AMD High definition audio devise
I hope this information is enough to help me, any help is surely appreciated.

carla68
Thanks for the follow up. Let us go through the check list to make sure what you are seeing should be the best possible
1. Project preset....Based on the Panasonic HA setting, the camera should be expected to be recording 1080i (in your case, 1920 x 1080 @25 interlaced frames per second). Either you (manually) or the project (automatically) should be setting the project preset to match those video properties, using
PAL
AVCHD
Full 1080i25
When you import that source into the Expert workspace and drag it to the Timeline, there should be no colored line over its content indicating that the file needs to be Timeline rendered to get the best possible preview. In fact, with no colored line, if you press Render, you will get file playback and not Timeline render.
Are we OK on this so far.
2. Right click the Edit area monitor, select Playback Quality, and then compare the set for Automatic versus Highest.
3. Go to Edit Menu/Preferences/General and the option there
"Timeline render quality (valid for HD projects)" and determine if it is set for "High quality, Slow Speed". If not, set it to that choice.
4. The bitrate for your source is 17 Mbps. If you have exported
Publish+Share
Computer
MPEG2
with Presets = MPEG2 1920 x 1080i25 High Quality
you should be OK bitrate wise since the defaults for the preset are
Minimum 18 Mbps
Target 25 Mbps
Maximum 30 Mbps
Have you looked at the export of
Publish+Share
Computer
AVCHD
with Presets = MP4 - H.264 1920 x 1080p25?
5. Is your computer's video card/graphics card driver version up to date according to the web site of the manufacturer of the card?
Please review and consider the above.
Thank you.
ATR

Is annotation for a hyperlink to another video is possible from the original video?

hi there,
i have been working on Adobe Presenter trail period for a while and thanks to adobe it's a tremendous help. i have a doubt- is it possible to hyperlink to another video from the original video.
i.e after creating a video i want to integrate another video into the original one through an annotation that will be displayed on the original video which provides a link for my second video.

Thank you, Ian. That sub-menu is what eluded me all right. It certainly seems to me to be one way I can do this: using the Paste Formula Results sub-menu under Edit. But before I copy the cells as you say, I will have to take several prior steps.
In the new sheet I have to select the top left cell of the subject range and there enter "=". Then, in the original sheet, I must select the corresponding cell. Returning immediately to the new sheet, I need to drag the cell right to extend the formula to two adjoining two cells. Now I need to drag those three cells to extend the formula to the bottom of my table (quite a number of rows, but the number matches that of the original sheet). Only at this point am I in a position to apply your suggested method: that is, copy what's already selected and use Shift-Command-V to paste the formula's result throughout the range.
I feel sure that will do it. But if anyone has any further suggestion as to how this could be done less cumbersomely, I would be very happy to hear it before I embark on the task ahead - because that will have to be repeated for another 24 new sheets in a couple of files. Quite a lot of work.
So, whilst you've helped me materially, a question still remains as to whether some other method might be possible?
Regards,
Peter White

Can't see secondary color correction in the viewer! Help...

Hello, fairly new at FCPro but I am trying to isolate reds in a clip and change them to purple & orange. I am using the Color Corrector Filter and when isolating the reds and making adjustments I do not see any changes in the viewer.
The eyeball icon on the top left of the window is checked but I can't visually see any changes happening. Can someone please tell me what is going on?
Thanks,
Dan G

One other simple gotcha is to be color correcting but the viewer is not showing the current clip (the one you are working on...)
Thanks for posting back. Good to have closure on questions.
x

How can I add photos to a video without interrupting the sound of the original video?

In PE11, How can I add photos to a video without interrupting the sound of the original video?

RLHeflin
Thanks for getting your details posted. Good job.
You further explained
I am simply wanting to “overlay” a new visual element without disturbing the underlying audio.
A classical way to do a Premiere Elements Overlay is to hold down the Ctrl key of the computer main keyboard and drag the new clip over the area of the one you want to replace on the Timeline. That should not do anything but replace one portion of the video on the Timeline. No change in duration video or audio track if you are dealing with video linked to audio.
If you hold down the Alt key of the computer main keyboard, I am envising a scenario where you want to add to (not replace) some Timeline content.
A just in case note, if you have video on Video 1 and 2 and the video in 2 does not have transparent areas in it, then all you will see is the Video 2 content. I believe that Hunt eluded to that concept as a possible technique for what you might be doing.
Another just in case, if you have not seen the following Adobe documentation on arranging clips, you might be interested in the following link
http://help.adobe.com/en_US/premiereelements/using/WS9B8F8208-EAE8-4b49-A79B-9479B46A8981. html
Please update us on your progress when you get a chance.
Thank you.
ATR

I unintentionally deleted the first segment of some video. I was able to get it out of the Trash and into "Finder", but I cannot restore it to iMovie and the original video. Help! How do I move the video (now in Finder) back to iMovie?

I deleted (to Trash) a segment of "raw footage" from an iMovie project that I did not want to delete.
I was able to retreive it from the Trash and move it to Finder, but I cannot figure out how to move it back to iMovie.
How do I do this (restore the video segment to the start of the project)?
Or, do I have to load the original video again from the camera?

@ "Afterimages":
Well, yes, I suppose I could re-import the video. (LIkely ALL of it, dammit!)
So, unless I'm mistaken that would be the "long way" to resolving this issue.
I was able the take the deleted video out of the Trash and now it's in Finder. Why can't I simply re-insert it into iMovie where it orginally was? That would be the simple solution, just "click and drag", or something like that, correct? Maybe that's impossible? (In which case, I must ask, "Wouldn't the creators of iMovie have considered this "boo-boo" and done something to remedy it easily?" I doubt I'm the first vidiot to do this...

How can I change the tempo (and the snap grid) of the project without altering the duration of the original audio clips?

This question is for Logic Express.
I have many very short audio clips that I recorded into my project.
I want to adjust the project tempo so that I can use the snap grid to make a beat out of my short audio clips. But when I change the project tempo, it automatically adjusts the lengths of my audio clips.
So how can I change the tempo (and the snap grid) of the project without altering the original audio clips?

The reason some files sound funny and others don't is because audio is handled a few different in Garageband depending on it's source (audio your recorded vs Apple Loops vs non Apple Loop pre recorded audio). Each of these have different color regions with different properties. I just found this thread that might better explain it:
http://hintsforums.macworld.com/archive/index.php/t-67538.html
I hope that helps!

I can not Trim Original Video Clip

There used to be two options when trimming a video,"Trim original and T"Save as New Clip", for some reason I'm not seeing the option to trim the original video. What happened, did I change the settings in my Icloud, or has this feature been removed?
I have an IPhone 6 plus with all updates with the largest capacity. at the time.

Wondering myself-the option just disappearEd and is a minor annoyance.

How do I re-import an original video clip

How do I re-import an original video clip
I want to re-edit a particualr clip (68 secs) and I have cleard the old clip (13 secs). But each time I try to import the original clip it only imports the portion I previously edited ie. 13 seconds.
I have renamed the clip, tried to open it in a new project same thing - PREMIER PRO 5

please be more precise about exactly what actions you took...
by giving very detailed info on what you did (from the beginning, when you first imported "the clip" to Premiere) and what you want to do, you help people, who'd like to help youfinding a solution.
But they need to understand what exactly your problem is.

In the iMovie 11 event library, how can I get the iPhoto video clips to combine with my camcorder pics listed below and in chronological order?

In the iMovie 11 event library, how can I get the iPhoto video clips to combine with my camcorder pics listed below and in chronological order?

Try forcing iPhoto to load the Library on the External Hard drive by launching it while holding down the Option key. Choose the Library on the External HD, and quit iPhoto, see if iMovie can see the Library with the iPhoto Videos contained inside.

Applying color corrections to the original video clips?

Similar Messages

Maybe you are looking for