Applying effect to title background mask?

I am trying to create a title for FCPX 10.1.4 with Motion 5 (the latest version).
I want it to be a lower third with a blurred background so that the footage is still identifiable but doesn't distract from the text. Imagine this like a normal lower third with a rectangular background the text is projected on, just that the background is not a solid color but the blurry image of what's underneath. I used a Gaussian blur effect for the footage and a mask that fades in and out, unfortunately this leaves me with a black background in FCPX and the only thing visible is a small portion of the background, blurred and beneath the title. I would like the black background to be the normal background and not the black color. None of the compositing settings seem to work. I tried adding a drop zone but unfortunately that adds a second source and it's very complicated to pick exactly the footage that lies underneath the title when it appears. The background color in Project Settings has no effect on the title so when I set that to white the outcome is still a black screen.

Easy.  You can't duplicate the Text Template background layer, but you can make a Clone layer of it.  Put the Clone layer on top!  Apply the Gaussian Blur to that Clone layer, and then use the Crop tool to crop it down to where you want it.  I'd still put a drop shadow on the text, though.
Anything you do to the original layer gets done to the Clone, but what you do to a  Clone is NOT transferred to the original layer.

Similar Messages

  • Help! Applying Effects to Titles

    Hi there,
    Why can't I successfully apply effects to titles (black background/white letters) without the title going bright white after rendering??? In preview mode everything looks great. I reopen file and try again, but it never works.
    Any amount of advice would help this frustrated beginner. Thanks!!!!!!!!

    Matthew,
    Thanks for the reply.
    I have a iMac G5, and so far the following effects have had this problem: rain, fog, letterbox. I did however get letterbox to work in a previous project I worked on a few months ago. But can't get them to work since.
    I'm using iMovie 5.0.2 (oops am I in the wrong discussion room?)
    Greener

  • How to apply a semi-transparent background to a text box

    Hi Framers,
    The cover of my doc has a full-page .png file on a master page. I want to add the title of the manual on the body page of the cover in a text box. No problem. However, I want to apply a semi-transparent effect to the background of the text box, so the graphic behind it shows in a muted way.
    I'm sure this has to do with some combination of the Tint, Fill, and Overprint settings but none of my experiments have produced anything close to the desired effect.
    I did RTFM and also searched the Help and the forum. I truly hope I didn't overlook the answer---but if I did, it wasn't for lack of trying!
    As always, your expertise is very much appreciated.
    TIA,
    Gay

    Wow, I wish I had Photoshop! I use a less sophisticated image editor, which has always served quite adequately and since it supports layers, I'll try to figure out how to do what you're suggesting.
    (I did try a "None" fill and the bottom image does show up, but I wanted it a bit muted, as would happen with perhaps a "half transparency" and that is apparently what I can't achieve in FM.)
    If I understand correctly, I need to edit the imported graphic to make a portion of it appear semi-transparent, and then when I bring it back into FM and put my text box on top of it, it will appear the same as if I had been able to put a partial transparency in the fill of the text box...
    I really, really, really hate it when I find myself thinking "Word could do this easily, why can't Frame?"
    Thanks for your helpful suggestions, guys, you're great. As always!
    Gay

  • How to place multiple images in batch with drop shadow effects on room backgrounds at the same position?

    I want to place multiple images of hand paintings with drop shadow effects on room backgrounds to make them look as if the paintings are hanged on the room walls. I know how to do it one by one, but that takes time and I want to do it in batch at once.
    I am quite a beginner for adobe photoshop CS6. I belive such an automated task is possible through 'Automated Batch' function and/or 'Create Droplet' function. Kindly share your expert opinion.

    If you want to go with Batch I would recommend creating an Action of more or less these steps:
    • set the resolution to the same as the background image’s
    • change the image from Background Layer to regular Layer if necessary
    • convert it to a Smart Object
    • add a Drop Shadow Layer Style to the image (do not use Global Angle)
    • place the background image (File > Place …)
    • move it behind the image layer
    • Image > Reveal All
    • make Selection from that layer’s transparency (cmd-click its icon in the Layers Panel) and use Image > Crop
    • select and transform the image layer to fit the intended position
    This would naturally work out best if the images had the same size and proportions.
    For the reflection on the floor duplicate the image, flip it vertically, move it in position and reduce its opacity to maybe 10%.
    Realistically you may have to hide it partially behind the pillows, a Vector Mask would be an option.

  • How to place multiple images of hand paintings with drop shadow effects on room backgrounds?

    I want to place multiple images of hand paintings with drop shadow effects on room backgrounds to make them look as if the paintings are hanged on the room walls. I know how to do it one by one, but that takes time and I want to do it in batch at once.
    I am quite a beginner for adobe photoshop CS6. I belive such an automated task is possible through 'Automated Batch' function and/or 'Create Droplet' function. Kindly share your expert opinion.

    If you want to go with Batch I would recommend creating an Action of more or less these steps:
    • set the resolution to the same as the background image’s
    • change the image from Background Layer to regular Layer if necessary
    • convert it to a Smart Object
    • add a Drop Shadow Layer Style to the image (do not use Global Angle)
    • place the background image (File > Place …)
    • move it behind the image layer
    • Image > Reveal All
    • make Selection from that layer’s transparency (cmd-click its icon in the Layers Panel) and use Image > Crop
    • select and transform the image layer to fit the intended position
    This would naturally work out best if the images had the same size and proportions.
    For the reflection on the floor duplicate the image, flip it vertically, move it in position and reduce its opacity to maybe 10%.
    Realistically you may have to hide it partially behind the pillows, a Vector Mask would be an option.

  • Feature Request: Apply effects to group of clip instances

    I have been trying to supply this feature request into the Adobe feedback form. But it appeared that it was too large to be posted in a single feedback form. So I had to split it into three distinct feedback forms.
    I don't want this feature request to get lost just because those three parts can't be joined back into a single feature request again. So I'd like to post it here, requesting for comments, too...
    This feature request is about applying effects to more than one clip:
    a)
    Currently, when selecting more than one clip, it's not possible to change any effects settings. The Effects Settings windows only shows a "Multiple clips selected" message.
    Thus, I'd like to suggest the following:
    When selecting more than one clip, the Effects Settings window should display any effects that apply to all the selected clips. Moreover, only those effect parameter values should be displayed having the same value across all selected effects. This on the other hand, of course, can only be displayed for effect parameters not having key frames/timing activated.
    Editing any of the displayed effects' parameters should apply the new value to each currently selected clip instance.
    b)
    Then again, when using key frame/timing activated effect parameters, it is currently not possible to apply such effect to more than a clip, too. To apply such animated effects to more than one clip it is currently necessary to nest those clips into a separate sequence.
    Thus, I'd like to suggest the following improvement:
    It should be possible to apply effects not only to clips but also to a group of clips (Menu Clip > Group).
    Activating animation/key framing to any of the effect settings of those effects being assigned to a clip group (in contrast to those effects assigned to any clip instance contained in the the group) will allow to add key frames spanning all clips of the group.
    This way it will be possible to easily create, e.g., a zoom effect spanning several clips.
    If there are clips in-between those belonging to the group, the group's effects won't be applied to those clips not belonging to the group. However, the effects' parameter values are continued to be calculated in the background.
    So this example would be true:
    - Available clips:
    | a | b | c | d | e |
    - Clips grouped into a Clip Group:
    | a |   | c |   | e |
    - Zoom video effect applied to the group, having two key frames added:
    Key frame #1 = beginning of clip | a |
    Key frame #2 = end of clip | e |
    Zoom value of key frame #1 = 100%
    Zoom value of key frame #2 = 400%
    --> So this will be the approximated calculated zoom value when the timeline reaches following points in time:
    Beginning of clip | a |:     100%
    End of clip       | a |:     132%
    Beginning of clip | b |: (100%)
    End of clip       | b |: (100%)
    Beginning of clip | c |:     174%
    End of clip       | c |:     230%
    Beginning of clip | d |: (100%)
    End of clip       | d |: (100%)
    Beginning of clip | e |:     303%
    End of clip       | e |:     400%
    (Unfortunately, this forum doesn't allow me to apply any kind of formatting to the example above. So I can't apply a monospace font or colouring )
    When a group gets ungrouped (Menu Clip > Ungroup), effects that had been applied to the group will be assigned to each individual clip of the group. For effect parameters that had key frames/animation activated, key frames will be created at the beginning and end of each of the clips. The previously calculated values will now be inserted at each automatically created key frame to mimic the grouped effect behaviour. This operation then would finalize the Ungroup operation involving clip group effects.
    Regards,
    Axel Dahmen

    You could combine the Next/Previous Edit commands with either the Apply Video Transition shortcut or with a paste command if you had copied the transition you want.
    OR... much easier if all you want is a bunch of consistent fade ins/fade outs...
    On a single clip, keyframe opacity to create a fade in from the in point of the clip at the duration you like, e.g. 30 frames. Right click Opacity, and select Save Preset; give it a name, e.g. Fade In 30 Frames and set it to Anchor to In Point. Reset the effect and delete the keyframes, and then repeat this to create a fade out. Go to the out point of the clip, set keyframes, and once again, right-click Opacity and Save Preset; this time call it something like Fade Out 30 Frames and set it to Anchor to Out Point.
    Now, you can simply select all of your clips in the sequence, and apply these presets by dragging them to the selection. Even though you created two presets, because you can only have one instance of Opacity on a clip, the keyframes from both presets will be added to that single effect. You have to do this with two presets--if you do it with one and use Scale, the keyframes will stretch out or compress to maintain a relative duration instead of an absolute duration.

  • Why I can't see my Brush Tool effects on my layer mask until I click on the Photoshop window one more time

    I really donut why my Photoshop works like I said on title.
    I cannot see see the Brush effects on my layer mask nor in my history panel until I click on somewhere else in Photoshop.
    This problem really slow down my workflow.
    Does any one know the reason and the solution of my problem here? Please let me know, thanks a lot.

    Update your graphics driver/ turn off GPU usage in the performance prefs. You have an issue with hardware-based transparency handling most likely. Otherwise you could have an issue with your input device, but since you have not provided any system info, we can't really know anything.
    Mylenium

  • How can I change the title backgrounds in a project from a converted movie trailer theme?

    I converted a movie trailer theme (action) to a movie. The title backgrounds are all red but I like the effects. I would like the background color to be blue. Thanks for your help!

    Unfortunately I tried doing a swap with a color background and it looks like it doesn't let you just drag a replacement background in. So the best you can expect is to drag a color background from the Map tool browser (it has a globe icon on it) and drag it next to the background you want to use, set the duration to be the same length. Drag the tite block to the new color background clip. Then delete the background from the original Movie trailer version.

  • Upgrade to imovie 6 from 3.0.3, now title backgrounds are purple!?

    Hello all,
    I have been using imovie 3.0.3 for sometime and have just ugraded to imovie HD 6.0.
    I opened a finished project into 6 and now my title backgrounds are purple and the actual video clips look "different". I'm guessing this has something to do with the HD part, but I really don't know for sure. Can anyone clue me in as to, at least, why my title backgrounds are now purple instead of black?
    Thanks in advance for any and all advice:)

    I'm back with the same weird purple results. Here's what I've done...
    I created a slideshow in iPhoto from an existing album of photos before the iLife06 upgrade. I manually applied the Ken Burns to each photo. All the pictures looked fine. I then exported the slideshow to a quicktime movie.
    I imported this movie into IM6 so I could extract the audio in order to add more songs. When I previewed the movie, the "purple haze" was there again! The preview screen was completely purple and each photo seemed to have a "light purple" overlay creating a definate purple tint.
    I have not burned this yet. When I burned a dvd before, all was ok in the end.
    I have also not created a completely new project using new photos. I will try this and see if the results are different.
    In my limited knowledge, could it be a problem with the original photos? Or, could it be something to do with screen resolution as it pertains to IM6? I use a 20" Apple Display.
    Any advice or troubleshooting steps would be greatly appreciated.
    Adam

  • Title-background-skin examples

    Hi
    I am trying to apply a Gradient to a Panel's titlebar's CSS.
    I believe I need to use the title-background-skin CSS property.
    I cannot find ANY examples of this on the internet. Nor can I find much in Adobe's documentation.
    Where can I see how to apply Gradients to a Panel's title? Is this impossible? I am starting to believe so...
    I did find this on StackOverFlow:
    http://stackoverflow.com/questions/1215433/creating-a-flex-panel-header-with-a-gradient
    ^ but that doesnt explain how to skin the title bar? Any ideas?

    Subeesh my man! I think you are on vacation

  • Best practice regarding work flow (cutting, applying effects, exporting etc)

    Hi!
    I've been asked to shoot and edit a music video for a friend of mine, and I'm trying to figure out the best way to manage this project in PrE (in what order to do things and so on). I have a picture in my head which make sence, but I'd like to have it confirmed. If you've been following the "Very disappointed with Premiere Elements" thread, you know I'm not a fan of how the applying of effects works, when having a lot of cuts between scenes and clips etc. A few of the steps below is meant to make that process more effective.
    So, here's my idea, from the begining and in detail:
    1. Download the appropriate clips from the camera (in this case 1280x720, H.264 mov's from an EOS 500D).
    2. Create a PrE-project for each clip and maybe trim the in and outs a bit, if needed.
    3. Export each clip to uncompressed avi's.
    4. Create the main project file and import all the uncompressed avi's.
    5. Insert the clips in on appropriate tracks in the timeline.
    6. Do all the cutting, triming and sync as complete as possible, without thinking about effects.
    7. When finished, open up each of the smaller clip projects and add the desired effects. This will mainly include contrasts, color corrections, noise etc, in order to get the right look and feel to each clip/scene.
    8. Again, export the clips to uncompressed avi's and overwrite the previous versions.
    9. Open up the main project, which now should contain the clips with look-and-feel effects visible.
    10. Add some additional effects if needed.
    11. Export/share, and you're done.
    Of course I will end up going back and forth through these steps anyway, but as a basic plan it seems reasonable. I see three main positive aspects:
    1. The look-and-feel effects will be applied on the raw material, before the converting process. This should result in a slightly better quality. Perhaps not noticeable, but anyway.
    2. The main project will be more CPU friendly and easier to work with.
    3. If I want to tweek the look-and-feel effect to a clip/scene, I don't have to do it on every split (I will have a lot of splits, so applying and changing the effect parameters will be time consuming and ineffective). Of course, opening up the clip's specific project, changing the effect and then export to avi, will also take time, but point 1 and 2 makes up for that.
    Have in mind that it is a music video project, to put things in the right context. We'll probably have a few parallel stories/scenes, with lots of cutting in and out between them. The timeline will probably look insane.
    So, am I thinking in the right direction here? Any traps I might fall into along the way?
    Regards
    Fredrik

    Fredrik,
    Though similar to your workflow, here is how I would do it.
    Import those "raw" Clips into a Project, and do my Trimming in that Project, relying on the Source Monitor to establish the In & Out Points for each, and also using different Instances of any longer "master Clip.". I would also do my CC (Color Correction), and all density (Levels, etc.) Effects here. Do not Trim too closely, as you will want to make sure that you have adequate Handles to work with later on.
    Use the WAB (Work Area Bar) to Export the material that I needed in "chunks," using either Lagarith Lossless CODEC, or UT Lossless CODEC *
    Import my music into a new Project and listen over and over, making notes on what visuals (those Exported/Shared Clips from above) I have at my disposal. At this point, I would also be making notes as to some of the Effects that I felt went with the music, based on my knowledge of the available visuals.
    Import my Exported/Shared, color graded Clips.
    Assemble those Clips, and Trim even more.
    Watch and listen carefully, going back to my notes.
    Apply any additional Effects now.
    Watch and listen carefully.
    Tighten any edits, adjust any applied Effects, and perhaps add (or remove existing) more Effects.
    Watch and listen carefully.
    Output an "approval" AV for the band/client.
    Tweak, as is necessary.
    Output "final approval" AV.
    Tweak, as is necessary.
    Export/Share, to desired delivery formats.
    Invoice the client.
    Cash check.
    Declare "wine-thirty."
    This is very similar to your proposed workflow.
    Good luck,
    Hunt
    * I have used Lagarith Lossless CODEC with my PrE 4.0, but have not tried UT. Both work fine in PrPro, so I assume that UT Lossless will work in PrE too. These CODEC's are fairly quick in processing/Exporting, and offer the benefit of smaller files, than Uncompressed AVI. They are visually lossless. The resultant files will NOT be tiny, so one would still need a good amount of HDD space. Neither CODEC introduces any artifacts, or color degredation.

  • Why are my still images Blurry when applying effects?

    I am creating a slideshow video using images with up to 18mp.  The images look wonderful clear and sharp until I try and add video effects to the slide, like zooming in or panning. 
    I am a user of both CS5.5 at work and newly acquired CS6 for home.  I like what I have been able to do, however this makes me very frustrated when everything looks good except for the images with effects.  Should I be applying effects differently?  or what?
    Thanks,
    G

    >Didn't mean to start an argument
    = Little Devil with a Grin !!!
    Stick around for awhile... there is OFTEN a good deal of "healthy discussion" (ie-disagreement) that goes on here
    That discussion brings out a LOT of different experiences (you say X doesn't work... but it works just fine for "me") that sometimes, maybe even often, leads to increased and/or new knowledge for everyone
    Other times, you just need to realize that what works for "me" may, or may not, work for "you" exactly the same way based on your work flow
    Read what everyone offers, try what you can... and make LOTS of notes so, over time, you will develop work practices that work best for you
    Personal example...
    Many people export out of PPro as MPEG2-DVD to then use Encore to author a DVD
    My PERSONAL work flow is to export my AVCHD edits to Widescreen DV AVI to give to Encore... so I may use Encore's Automatic Transcoding setting to make a "best" fit of video length to size (single or dual layer) of DVD
    This is because I just don't care to get into all the details of figuring out the PPro settings when exporting... I let Encore do all the math for me
    That process works just fine for me... other people want to figure out their own math for the PPro export settings
    I say what I do, and why, but I certainly do not TELL anyone else that they MUST do it my way

  • Audition 6 Crashen when previewing or applying effects

    Hi
    I recently installed the Creative Suite Master Collection CS6 Windows version of my new Retina MacBook pro (new 13" model) and I'm having a few problems with Audition. The main problem is that when applying effects (like a FFT filter or Stretch and pitch) Audition would crash when trying to either preview the effect or apply it.
    One example is when trying to change the pitch of an audio file. Normally I use “Audition” as the algorithm rather than iZotope. Audition would crash when previewing the effect or when trying to add it. It doesn’t crash when using the iZotope algorithm. It also happens if I try to apply reverb effects too.
    This Macbook Pro I’m using is running Windows 7 Pro x64 via Bootcamp.  I don’t have a lot installed on it atm & both windows & the master collection are fully activated. I had an older Macbook that never had this problem before. I’ve also tried Audition from CS5.5 on Mac OS X & it doesn’t have this sort of problem.
    These are the errors that show up acording to System info.
    21/11/2013 11:37 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xe38
Faulting application start time: 0x01cee7126c7bcb50
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: d7646e70-5305-11e3-b2ec-b8e8562f706d
    21/11/2013 11:15 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x12b4
Faulting application start time: 0x01cee70f7f3697c8
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: cbcd68a9-5302-11e3-b2ec-b8e8562f706d
    21/11/2013 11:12 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x4b8
Faulting application start time: 0x01cee70f04570245
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 561403a2-5302-11e3-b2ec-b8e8562f706d
    21/11/2013 11:10 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xe6c
Faulting application start time: 0x01cee70ec8477f12
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 10929c0c-5302-11e3-b2ec-b8e8562f706d
    21/11/2013 11:06 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x658
Faulting application start time: 0x01cee70e4b5727b1
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 9236f4ba-5301-11e3-b2ec-b8e8562f706d
    21/11/2013 11:04 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xa8c
Faulting application start time: 0x01cee70dccc70c7b
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 4257ff4b-5301-11e3-b2ec-b8e8562f706d
    20/11/2013 11:06 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x820
Faulting application start time: 0x01cee645220cb493
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 744a4280-5238-11e3-b707-b8e8562f706d
    20/11/2013 11:58 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0xd9000001
Faulting process id: 0x760
Faulting application start time: 0x01cee5e7d393c02e
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 1c32aef1-51db-11e3-9a73-10ddb1d3a475
    20/11/2013 10:21 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.0.708, time stamp: 0x4f70c4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xb14
Faulting application start time: 0x01cee5da3fe7841d
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 952a0ad5-51cd-11e3-8ec8-b8e8562f706d
    20/11/2013 8:15 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x85c
Faulting application start time: 0x01cee5c8a7034e04
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: fc3e6fae-51bb-11e3-a467-10ddb1d3a475
    20/11/2013 8:02 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x71c
Faulting application start time: 0x01cee5c6b5872308
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 1b3c52ed-51ba-11e3-8f54-b8e8562f706d
    20/11/2013 7:56 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0xd9000001
Faulting process id: 0xdd4
Faulting application start time: 0x01cee5c5b4d6e335
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 38bf67dd-51b9-11e3-8f54-b8e8562f706d
    20/11/2013 7:53 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x45ef2b00
Faulting process id: 0xfb8
Faulting application start time: 0x01cee5c5994aed2a
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: e41b8eed-51b8-11e3-8f54-b8e8562f706d
    20/11/2013 5:23 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x11f4
Faulting application start time: 0x01cee5b0a915ab6d
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: f2af723e-51a3-11e3-b13b-b8e8562f706d
    20/11/2013 4:31 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x10d8
Faulting application start time: 0x01cee5a7a7709775
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 9c86583e-519c-11e3-a64a-b8e8562f706d
    20/11/2013 4:15 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x1390
Faulting application start time: 0x01cee5a6f5c8b771
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 589c80cd-519a-11e3-a64a-b8e8562f706d
    20/11/2013 4:13 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x57c
Faulting application start time: 0x01cee5a6dc71a5dd
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 2803eecc-519a-11e3-a64a-b8e8562f706d
    20/11/2013 4:13 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xc14
Faulting application start time: 0x01cee5a680b2c167
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 12d672bd-519a-11e3-a64a-b8e8562f706d
    Heres what shows up on my Audition log.txt file
    Log file created: 22/11/2013 10:14:59 AM
    Ticks = 0      <2912> <AuLog.Startup> <5> Application: Audition
    Ticks = 0      <2912> <AuLog.Startup> <5> Version 5.0.2
    Ticks = 0      <2912> <AuLog.Startup> <5> Build: 7
    Ticks = 78      <2912> <AuLog.Startup> <5> AuUI initialization sequence started...
    Ticks = 78      <2912> <AuLog.Startup> <5> Initializing Crash Recovery
    Ticks = 78      <2912> <AuLog.Startup> <5> Previous Crash Detected!!!
    Ticks = 2044      <2912> <AuLog.Startup> <5> Initializing AuDSP
    Ticks = 2044      <2912> <AuLog.Startup> <5> Initializing AuBackEnd
    Ticks = 2138      <2912> <AuLog.Startup> <5> Initializing AuApplication
    Ticks = 2247      <2912> <AuLog.Startup> <5> AuApplication initialization sequence started...
    Ticks = 2247      <2912> <AuLog.Startup> <5> Initializing XML Loader
    Ticks = 2262      <2912> <AuLog.Startup> <5> Initializing Application Settings
    Ticks = 2262      <2912> <AuLog.Startup> <5> Intializing dva unit test and console
    Ticks = 2262      <2912> <AuLog.Startup> <5> Initializing Audio Device
    Ticks = 2325      <2912> <AuLog.Startup> <5> Initializing XMP System
    Ticks = 2340      <2912> <AuLog.Startup> <5> Initializing AMIO Host
    Ticks = 2340      <2912> <AuLog.Startup> <5> AMIO Host initialization sequence started...
    Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioAiff
    Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioApe
    Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioLSF
    Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioMp2
    Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioMp3
    Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioQT
    Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioWav
    Ticks = 2340      <2912> <AuLog.Startup> <5> AMIO Host initialization sequence complete.
    Ticks = 2340      <2912> <AuLog.Startup> <5> Session Host initialization sequence started...
    Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: FinalCutXML
    Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: LegacyXML
    Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: OmfSession
    Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: PremiereProInterchange
    Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: SesxNative
    Ticks = 2340      <2912> <AuLog.Startup> <5> Session Host initialization sequence complete.
    Ticks = 2340      <2912> <AuLog.Startup> <5> Initializing Clipboard Manager
    Ticks = 2340      <2912> <AuLog.Startup> <5> Initializing Preset Manager
    Ticks = 2372      <2912> <AuLog.Startup> <5> Initializing Favorites Manager
    Ticks = 2372      <2912> <AuLog.Startup> <5> AuApplication initialization sequence complete.
    Ticks = 2372      <2912> <AuLog.Startup> <5> Initializing AsyncQueueManager
    Ticks = 2372      <2912> <AuLog.Startup> <5> Initializing AuUI
    Ticks = 2403      <2912> <AuLog.Startup> <5> Setting up temp directories
    Ticks = 2528      <2912> <AuLog.Startup> <5> AuUI initialization sequence complete.
    Ticks = 2652      <2912> <AuLog.DisplaySurface> <5>     Initialize PRM
    Ticks = 2652      <2912> <AuLog.DisplaySurface> <5>     Initialize DS
    Ticks = 2652      <2912> <DynamicLink> <5> Attempting to launch dynamiclinkManager
    Ticks = 2652      <2912> <DynamicLink> <5> C:\Program Files (x86)\Adobe\Adobe Audition CS6\dynamiclinkmanager.exe
    Ticks = 2746      <2912> <AuLog.DisplaySurface> <5>     DS Initialize succeeded
    Ticks = 2746      <2912> <AuLog.DisplaySurface> <5> Video Panel is using the Display Surface
    Ticks = 2918      <2912> <AuLog.Startup> <5> Initializing AuScripting
    Ticks = 13214      <2912> <AuLog.Plug-in> <5> Loading AMIO plug-in: AmioWav
    Ticks = 13229      <2912> <AuLog.Plug-in> <5> Audition Wave Amio plug-in. ID: 60df8553-00c8-4fd7-8a07-6f25e30ab79c
    Ticks = 17332      <2912> <AdamEveAudioComponentEditorView::SyncParameters> <5> (from component) parameter out of range: index = 19, value = -0.251256
    And here are some quick specs acording to System info
    Item Value
    OS Name Microsoft Windows 7 Professional
    Version 6.1.7601 Service Pack 1 Build 7601
    Other OS Description  Not Available
    OS Manufacturer Microsoft Corporation
    System Name CHRISNEWMBOOK
    System Manufacturer Apple Inc.
    System Model MacBookPro11,3
    System Type x64-based PC
    Processor Intel(R) Core(TM) i7-4850HQ CPU @ 2.30GHz, 2301 Mhz, 4 Core(s), 8 Logical Processor(s)
    BIOS Version/Date Apple Inc. MBP112.88Z.0138.B02.1310181745, 18/10/2013
    SMBIOS Version 2.4
    Windows Directory C:\Windows
    System Directory C:\Windows\system32
    Boot Device \Device\HarddiskVolume4
    Locale Australia
    Hardware Abstraction Layer Version = "6.1.7601.17514"
    User Name ChrisNewMBook\Chris New MBook
    Time Zone AUS Eastern Daylight Time
    Installed Physical Memory (RAM) 16.0 GB
    Total Physical Memory 15.9 GB
    Available Physical Memory 13.5 GB
    Total Virtual Memory 31.8 GB
    Available Virtual Memory 29.3 GB
    Page File Space 15.9 GB
    Page File C:\pagefile.sys
    The sound hardware found on this Macbook is a Cirrus Logic CS4208 (AB 94). Atm I'm using the stock drivers included with Bootcamp. Also, both Windows & adobe software are all up to date.
    Can you please help me out?
    Thank you

    Because my main computer is a PC with CS6 & i'm usiing my macbook as a secondery PC. Yes I could use the mac version but all my projects are done on CS6 while I have CS 5.5 on the mac partition. Plus I'm not interested in updaing to CS6 for mac (if it's possible since ny CS5.5 is an upgrade from CS5).
    Anyway I just want some help fixing up Audition for windows.

  • Won't let me apply effects

    Everything in iMovie HD 6 seems to work fine apart from not being able to apply effects. I've tried most of the effects. I have no problems changing settings. It even renders or looks like it's rendering but nothing changes with the clip. It's the same as it was before.
    Can anyone help?

    same thing.
    had my imac harddrive replaced and now the quartz composer effects dont work. I've been researching for the past 3 hours. Does anyone have the answer to this.
    I'm led to believe it has to do with not having the latest codecs? or something is off with my quartz composer (tho i see it renderin in preview) or this is just a bug that no one has the answer to.
    won't somebody help georgieporge and I?

  • Is it possible to apply effects at an increasing rate

    I guess i would like is to apply effects like reverb or detune that start off suttle and reach a peak i choose and contuniue till i want them to either fade away or stop? i believe this would be some kind of morphing or variable intensity included with an effect.

    Sorry... Clicked send too soon.
    To get a similar Wet/Dry effect you could copy the clips to another track and add the full effects to that.  Then use the gain/volume automation to set the level of effects on the track you created.
    In some effects you can set the effect level to 100% and the dry mix to 0% and then just use the tracks Automation to mix the effect. But some effects mix the dry sound without giving you control of how much.  In that case, you may need to adjust the gain/volume automation of the original dry track to match the levels in the mix.
    Ok... I think I got that right...

Maybe you are looking for

  • How to sync two iphones to itunes acct

    i sync both my iphone 4 to one acct and now both are backedup the same-i want to be able to sync each phone seperatly-how do i do it??????????

  • Help with installing application express

    that´s my problem I install oracle application express in virtual machine and when I acces yo the web I got wwv_flow.app_not_found_footer_err please some helps .. only I know the version of the owa is not geater the version of APEX is 3.2 and I was l

  • Is Illustrator converting lines to a fill?

    I think this is a Illustrator issue. This problem is sporadic too! I create labels using Illustrator CS4 which i then turn to a pdf through Distiller 9. The pdf is then sent to the printer who re opens the file in Illustrator to create the plate sepa

  • JavaScript CloneRow stopped working in Apex 4.2

    we ran a javascript Clone Row on our Tabular Forms in Apex 4.0 after upgrading to 4.2 we get ERROR: Current version of data in database has changed since user initiated update process. current row version identifier = "719C601E3911F88E9AD268A7EF06331

  • Multicasting using different operating systems

    Hi, I was testing the multicast example from the Java Tutorial (http://java.sun.com/docs/books/tutorial/networking/datagrams/broadcasting.html). The example does not seem to work with machines running different operating systems. I tried running the