Applying effects to a small section of a track in Multi-track view, not recordin automation properly

Hello there!
Recording Automation of effects is not working properly.
In Mulitrack view, I'd like to apply effects sparingly to small sections of a particular track.
I have tried the different modes (Read, Latch, Touch, and Write).
All I'm trying to do is make the delay effect turn off completely for most of the track, but come in precisely on certain words within that track to provide a delay or echo effect on specific words, but not the entire vocal track.
Audition records the turning on and off of the effects, just not at all the way I programmed it.
Audition turns on the effects about 1 or 2 seconds after I told it to, so obviously it does not effect the words I want it to.
When I'm recording the automation I get it just right, but when I play it back, it does not effect the spots where I turned it on, it doesn't turn on the effects until a second or so after I had told it to !
I've tried everything, I did go into preferences and select "multitrack" and changed the "automation optimizations" to try to make it work, but to no avail, I changed the automatch time from 1 second to 0 seconds, then up to 5 seconds...admittedly I don't understand these "automation optimizations" but I tried all types of different settings.
All I want to do is to precisely automate the turning on and off of effects, for about 1 second at a time, to apply some delay to certain words withing th vocal track.
Now I know I can go to edit view and go through the entire track highlighting different words and applying the effects to them, but shouldn't I be able to do that non-destructively in Multi-track view through the use of Automation?
IF I must go through the entire track highlighting each word to apply delay to, then what is the best way: to first save another copy of that file so if I don't like the destructive edits the next day I can go back and restore the original file?.....What would be the best way to do this and wouldn't this way use much more space on the harddrive, wouldn't I have to duplicate entire vocal tracks and save them under a different name? What is the best way to do a workaround if I can't get automation to work correctly?
It would be great if someone could guide me through the easiest way of doing this, or better yet just tell me all the ways of accomplishing what I'm trying to do.
THANK YOU A GREAT DEAL FOR READING!

Thanks for your response Steve, I didn't explain things thoroughly enough which is why you thought I hadn't tried the automation twirl down that shows the automation lanes, yes I do know about that and did try it, let me try to explain properly:
I did try it with the automation lanes before posting here and it worked with the volume and pan etc... BUT, with the delay they only let you automate one of the delay parameters at a time, SO, for instance, I can ONLY automate one of the following parameters at a time relating to delay: "wet" or "dry" or "delay" or "feedback" or "trash" or "spread" or "distortion mode"
ALL I want to do is turn the entire effect ON for 1 or 2 seconds (using the exact delay settings I already set), and then have it turn OFF until a few bars later, when, again, I would like to apply the delay effect to another individual word or two and so on...But there seems to be no option to simply turn the entire effect on or off for certain segments of a track using the automation lane (unless perhaps I create 7 automation lanes for all the parameters)...but maybe I'm missing something...
SO, what I was doing was setting the automation to record changes during playback, then I was toggling the efx "on/off" button or "power" button (the one that turns green when on) and I was clicking that on or off for each word to record that into the automation.
It worked, it does turn the efx on and off, just not at all as I did it during the recording, there is a discrepancy between when I applied it during the automation recording process and when it turns off and on during playback...it's way late, but it does turn it off and on completely, just not in the same sequence which I intened it to record.
It would have been absoltely beautiful if it just played back the on and off toggles back as I had played it, I don't understand why it's late in doing so...
"sigh"
anyway, thanks for you help.
sidenote: let me know if you understand what I did, I'm not even sure if this was intented to be a function of audition, but really it almost worked...and if I guess and turn it on about a second before I want the effect to turn on (when recording the automation) then I can get it to land right on some words, if I do it just right, but too hard to guess and anticipate perfectly every instance I should apply the effect early during the automation recording process so I and I never get it to hit every word.
it seems it should just record it as i performed it, maybe there is some setting I am missing...any thoughts on this particular method?

Similar Messages

How to apply effect to a certain time frame?

Hello everyone,
I was just wondering how can I apply an effect to a full avchd file, but specify what time frame it will effect?
Say if I want the video to be black and white for the first 5 seconds and then transition from that black and white into color how do I actually do that?
Do I need to split the video up into pieces and apply the efect to each piece? How do I split the full video into smaller sections in Premiere Pro if so?
Thanks.

Is there a way to customize the cross dissolve at all? It seems a bit basic. Or are there any cool techniques you suggest I do with the cross dissolve?
You can adjust the Duration of the Cross-dissolve. In the stated case, you are trying to add an Effect to only part of the Clip. The reason for the Cross-dissolve is to ease the viewer into the Effect, so you want the Cross-dissolve to be essentially invisible.
Even with Transitions that are not "easing" the audience into an Effect, I usually keep it very simple. Butt-cut, Dip-to-Black and Cross-dissolve are what I use 99% of the time. Most of the rest have never been used, with perhaps an exception for Titles and their animation.
The Keyframing can allow for this too. A good, simple approace would be to go to the Effects Control Panel (where you added your Keyframes), and Rt-click on the first one, choosing Ease-Out from the flyout menu. You'll notice that the graph of your Keyframes now looks different, as does the icon for the Keyframe. Go to the next Keyframe, Rt-click and choose Ease-in. Notice the changes to both that icon and also to the graph. If you look closely, you will see that on the graph, each Keyframe now has a pair of "handles." You can click and drag on the point on these handles to alter the velocity of the Ease-Out/Ease-In functions. Note: there are many more ways to alter the velocity, but this is a simple starter example.
Good luck,
Hunt

Best practice regarding work flow (cutting, applying effects, exporting etc)

Hi!
I've been asked to shoot and edit a music video for a friend of mine, and I'm trying to figure out the best way to manage this project in PrE (in what order to do things and so on). I have a picture in my head which make sence, but I'd like to have it confirmed. If you've been following the "Very disappointed with Premiere Elements" thread, you know I'm not a fan of how the applying of effects works, when having a lot of cuts between scenes and clips etc. A few of the steps below is meant to make that process more effective.
So, here's my idea, from the begining and in detail:
1. Download the appropriate clips from the camera (in this case 1280x720, H.264 mov's from an EOS 500D).
2. Create a PrE-project for each clip and maybe trim the in and outs a bit, if needed.
3. Export each clip to uncompressed avi's.
4. Create the main project file and import all the uncompressed avi's.
5. Insert the clips in on appropriate tracks in the timeline.
6. Do all the cutting, triming and sync as complete as possible, without thinking about effects.
7. When finished, open up each of the smaller clip projects and add the desired effects. This will mainly include contrasts, color corrections, noise etc, in order to get the right look and feel to each clip/scene.
8. Again, export the clips to uncompressed avi's and overwrite the previous versions.
9. Open up the main project, which now should contain the clips with look-and-feel effects visible.
10. Add some additional effects if needed.
11. Export/share, and you're done.
Of course I will end up going back and forth through these steps anyway, but as a basic plan it seems reasonable. I see three main positive aspects:
1. The look-and-feel effects will be applied on the raw material, before the converting process. This should result in a slightly better quality. Perhaps not noticeable, but anyway.
2. The main project will be more CPU friendly and easier to work with.
3. If I want to tweek the look-and-feel effect to a clip/scene, I don't have to do it on every split (I will have a lot of splits, so applying and changing the effect parameters will be time consuming and ineffective). Of course, opening up the clip's specific project, changing the effect and then export to avi, will also take time, but point 1 and 2 makes up for that.
Have in mind that it is a music video project, to put things in the right context. We'll probably have a few parallel stories/scenes, with lots of cutting in and out between them. The timeline will probably look insane.
So, am I thinking in the right direction here? Any traps I might fall into along the way?
Regards
Fredrik

Fredrik,
Though similar to your workflow, here is how I would do it.
Import those "raw" Clips into a Project, and do my Trimming in that Project, relying on the Source Monitor to establish the In & Out Points for each, and also using different Instances of any longer "master Clip.". I would also do my CC (Color Correction), and all density (Levels, etc.) Effects here. Do not Trim too closely, as you will want to make sure that you have adequate Handles to work with later on.
Use the WAB (Work Area Bar) to Export the material that I needed in "chunks," using either Lagarith Lossless CODEC, or UT Lossless CODEC *
Import my music into a new Project and listen over and over, making notes on what visuals (those Exported/Shared Clips from above) I have at my disposal. At this point, I would also be making notes as to some of the Effects that I felt went with the music, based on my knowledge of the available visuals.
Import my Exported/Shared, color graded Clips.
Assemble those Clips, and Trim even more.
Watch and listen carefully, going back to my notes.
Apply any additional Effects now.
Watch and listen carefully.
Tighten any edits, adjust any applied Effects, and perhaps add (or remove existing) more Effects.
Watch and listen carefully.
Output an "approval" AV for the band/client.
Tweak, as is necessary.
Output "final approval" AV.
Tweak, as is necessary.
Export/Share, to desired delivery formats.
Invoice the client.
Cash check.
Declare "wine-thirty."
This is very similar to your proposed workflow.
Good luck,
Hunt
* I have used Lagarith Lossless CODEC with my PrE 4.0, but have not tried UT. Both work fine in PrPro, so I assume that UT Lossless will work in PrE too. These CODEC's are fairly quick in processing/Exporting, and offer the benefit of smaller files, than Uncompressed AVI. They are visually lossless. The resultant files will NOT be tiny, so one would still need a good amount of HDD space. Neither CODEC introduces any artifacts, or color degredation.

Can i add a visual effect to just a section of a clip and how do i do this?

Can i add a visual effect to just a section of a clip and how do i do this?

Here is how I would do it.
1) Drag the clip into your project, if it isn't already.
2) Select those frames that you want to apply the effect by dragging. They should be enclosed in a yellow border.
3) Right click within this yellow border and select "Split Clip"
4) You can now apply the effect to this section.

Pixelated vectors when applying effects?

For some reason Illustrator has decided to horribly rasterize my vectors whenever I attempt to apply effects. I've never had a problem with this before, it was fine one minute, the next, I'm getting these incredibly pixellated awful lookng mostrosities the second I open the effects gallery.
I've tried adjusting the raster effects (did it always rasterize the vectors when effects are applied? It never looked this horrbile before...), adjusting the dpi, enabling/disabling pixel preview or overprint preview, I've tried upscaling the vectors, downscaling the vectors, restarting my computer, reinstalling Illustrator, adjusting the power settings on my computer, blah, blah, blah- everything. NOTHING works.
Here's an example of what I'm talking about:
That object is about 2 inches in diameter, so it's not very small. I just don't get it.
What the hell's wrong with Illustrator?!!!!!
Any help would be way more than appreciated.
Thanks!

Star God,
What happens if you untick Align to Pixel Grid in the Transform panel?
Otherwise, you may try the following (you may have tried/done some of them already) and see whether it helps:
1) Close down Illy and open again;
2) Restart the computer;
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup;
4) Move the folder with Illy closed;
5) Look through and try out the relevant among the Other options;
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool if you have CS3/CS4/CS5, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Can't seem to render only a small section of film

Dear All,
I've been trying to finish a film which is made up of still images, audio and (the only effects) dissolves. When, having made an adjustment to an image, I try to render just that small section, there seems to be no change. My timeline is still marked with a green 'unrendered' line. I've tried highlighting the two relevant shots and then rendering them, but no dice. I looked on the forum, and I quote your excellent Tom Wolsky:
"You can render a part of the timeline by making sure nothing is selected in the timeline and marking In and Out points"
I've tried that too. Still no luck. For the record, the command I'm using is "Cmd-R" rather than "Alt-R", which renders the entire file. But the latter seems to be my only recourse, and takes at least an hour each time! Surely I'm getting something wrong ...
Look forward to your help!
Roger

Thanks, Tom. Your speedy and clear response is much appreciated.
I've just taken your first suggestion (checked the green bar in Sequence-Render Selection) and it seems to be working - but the progress bar still tells me that it's going to take around 20 minutes. Is this reasonable? Or do I have further difficulties? When I've tried to play the sequence without rendering it's got stuck, and a dialog has told me that 'one or more frames were dropped during playback'. I've tried keeping RT playback to 'safe' etc., but this situation doesn't seem quite the optimum. Am I still missing something?
Thanks again,
Roger

How Do You Apply Process Effects To Multiple Clips In A Multi-Track?

A multi-track sequence brought over from Premiere, I have over a dozen clips from a funeral service video that need noise reduction.
But, because it's a process effect, I can only work on one clip at a time. Furthermore, I may need to apply several passes of the NR effect to eliminate the noise without sounding weird.
How then do I apply that effect (and its parameters) to the rest of the clips in the sequence?
In Premiere, you can copy and paste effects (and their parameters) from one clip to another. There is no such thing in Audition that I can see.

Hi, Alex.
It seems you want to do some broadband de-noise processing. While one can do a noisefloor sampling from one clip and apply it to others (great for when you have multiple takes from the same setup), it may be best to noise sample each individually if the mic has moved position enough to cause the tonal characteristics to change.
An example would be if on-screen talent is walking in an outdoor location. In one part of the location, a particular section of the clip has a lot of BG traffic noise. Another recording has a fountain in the BG - while it still may have some of the traffic in it, the predominant BG noisefloor is "strong fountain/weak traffic", so like others have mentioned, it makes more sense to make a new BG sampling to match the characteristics of this clip.
All that being said, here is how you BATCH PROCESS / broadband de-noise a bunch of clips, it's a 4-tiered / 21-step process when starting from scratch.
                              NOTE: there is a manual cheat after the Batch Processing lesson - skip to that if you wish
(WARNING - this type of processing is most successful if the file has been EQ'd or gain boosted (if needed) before processing. This is also true for the noisefloor sample. It should be taken from the pre-adjusted clip so that it all matches level)
1) find / open a source clip that best represents the BG noisefloor you wish to sample as your broadband source for processing,
then in the WAVEFORM editor window press alt-shift-C to save this selection as a new file - give it a unique name that represents its function
     a. ideally, this selection will be more than 5000 samples
     b. should be free of non-BG noise sounds (Dx, footsteps, mouth sounds, it should sound like a very short ambiance loop)
2) with your new sample saved and your source clip still open in the UI:
     a. load your noise print file
     b. adjust the Noise Reduction and Reduce by sliders (I suggest you start with a noise reduction value of 100% with a reduce value of 3 to 6 dB)
     c. under Advanced Settings, set Spectral to 0%, Smoothing to 20, Precision to 7, and Transition width to 2dB - these settings
         are like painting not with a wide brush but with a thinner brush, which means less cancellation of frequencies you want to keep and less artifacting
     d. toggle on/off the Output Noise Only function to see just what you are subtracting in your process - a great way to make adjustments until your
         noisefloor-only sound is free of Dx and other Production sounds
     e. optional advanced step - in the process UI Frequency window, you can draw a curve to select the frequency ranges that will be processed - this is another
         way of "thinning the brush" so that you are NOT processing where it's not needed in the broadband range - i.e. hiss from a low-quality mic,
         open the FA window [alt-Z] to see realtime Freq. Analysis on playback of your clip with the processing;
         adjust your settings and the curve in the window to counter the frequency range of the noisefloor - this process is like alchemy, wicked awesome
     f. once you're happy with your settings, click the Save Effects Preset button (down-arrow on hard-drive) next to the Presets pulldown button.
               do NOT apply your process yet - that's the next step
3) now, you're going to create the Favorite that the Batch Process will use to process your clips
     a. select Favorites / Start Recording Favorite (every user function of the software is now being recorded into a macro)
     b. in the Noise Reduction UI, click the Load Noise Print button and select your saved file
     c. now, select your preset from the pulldown menu
     d. click the Select Entire File button below the UI Freq. window
     e. click Apply
     f. click Favorites / Stop Recording Favorite
4) now, under EDIT, select Batch Process
     a. select your new Favorite from the pulldown tab
     b. drag and drop the files into the Batch window or load them from the Load button in the upper left of the Batch window
     c. click the Export Settings button in the bottom left
     d. set any pre/postfix labeling additions (this works a lot like Adobe Bridge's Batch Rename tool - amending the original filename to differentiate
     e. set a NEW save location to isolate the files
     f. set the format / type / bitrate (best to keep the original format or a higher quality); when finished, click OK
     g. in the lower right corner, click the RUN button and watch the magic right before your eyes
[HERE IS THE CHEAT]
Now that you're learned the magic of batch processing (FYI a new favorite can contain / execute multiple existing effect processes), here is what I recently did in a doc with interview footage - guys in front of a green screen with a less than perfect sound environment.
1) in Multitrack mode, double-click your clip to process
2) in Waveform mode, select the noisefloor area to sample and type shift-P
3) type ctrl-shift-P to open the UI - adjust your De-noise settings for ALL of your processing
4) type ctrl-A to select the entire file
5) click Apply; type ctrl-shift-S to save this processed file (I add "_PROC") as an alternate to the original which still exists should you want to go back to it easily - the ALT file will be in the multitrack timeline
6) type G (de-select I/O area) then type F12 key - returns to Multitrack mode
7) double-click your next clip to process and repeat steps 3-7 until finished (you won't need to tweak the settings in 3 after the initial step 3)
In 3-5 minutes, you're Done!
I discovered another layer of coolness within Audition regarding CLIP Effects Racks where one can setup a stack of effects, save as a User Preset, and apply them to either an individual clip, a set of clips, or to a track. This is great when you want to apply, for example, a Parametric EQ for filtering an outdoor location or boosting a lav mic's High Freq. Shelf for addition sibilance PLUS a Tube-modeled Compressor to handle dynamics...you spend a lot of time tweaking the settings "just right", and now you want to apply to more than one clip on a track.
In a short film I'm working on, I use this technique to apply EQ and Room Ambiance (reverb) to camera perspective changes on a single track of ADR for off-camera Dx. I place the Dx in a track. Splice on the camera edits to make unique clips, select the Audio Perspective preset I made for each camera angle, and Voila!
Have fun!
-CS

Applying effects before or after?

When colour correcting in Color 1.5.3 are you able to import the movie back into Final Cut 7 if you have been applying effects (ex. motion, sharpening, etc...) at the same time in Final Cut?

No.
Don't work that way.
Do your cut.
Send the cut to Color.
Color Correct and send back to FCP
THEN do moves, motion, sharpening etc.
OR
Do all the moves, motion, sharpening in FCP and bake them into the clip THEN send it to Color.
AND
Make sure you are sending ProRes files from FCP.
Before you do much in Color, it pays dividends to really understand the section in the Color Manual entitled,
Moving Projects from Final Cut Pro to Color
x

How do I export a small section of a large complex illustrator graphic?

I have a large complex map in an illustrator file and I need to export smaller sections of the map for other uses. When I use artboards, the files still retain ALL of the information. I just want the portion that is on the artboard and I want it as a vector format, so the smaller areas can still be edited.

Not sure I have enough info to help you, but are a couple suggestions:
Option 1:
Select what you want to keep
Select>Inverse
Delete
Save a Copy
Undo and repeat as needed
Option 2 (requires Script "MultiExporter"):
Assemble elements for export on separate Layers/Artboards
Run MultiExporter Script to export Layers and/or Artboards to separate files (SVG, PNG, etc.)

A small section of my screen is blurry.

A small section of my screen is blurry. About one inch wide and the full length of the screen. Do I need a new screen, or is there a fix?

There are a couple modules that could be defective: the LCD screen, or the main logic board. So, there is a fix and, if your computer is not covered by AppleCare, it is likely to be expensive.

How do I apply different margins to different section in the same document?

In Pages 5, how do I apply different margins to different section in the same document? there are is no layout break like in Pages 4.

Use the Text Format Pane, Layout Tab, Indents.
You could do the same thing by dragging the margin stops on the Ruler.
Jerry

How can I adjust a small section of sound within a clip?

I'm working with Mavericks, iMovie 10.0.5 on OSX 10.9.4. I want to lower a small section of sound within a video clip without having to lower sound for the entire clip. I could do this in the previous iMovie version. How can I do this now?

Hold down the Option key and double-click on the audio volume level line. That will add a control point where you can adjust the volume on either side. Add more control points such that you can set the level to what you want where you want.

In fcp7 there is a "close gap" option so you don't have to highlight and move everything every time you delete a small section in the middle of a video. Is it possible to do this in fcpx? I can't seem to find it...Thanks!

In fcp7 there is a "close gap" option so you don't have to highlight and move everything every time you delete a small section in the middle of a video. Is it possible to do this in fcpx? I can't seem to find it...Thanks!

This isn't the actual clip, I fixed it by highlighting and moving everything over but it'd still be a good thing to know for the future. This is essentially the situation i'm talking about. I would never use it for something this simple, but when more complicated editing is being done it isn't so easy to just move all the clips over.

Why are my still images Blurry when applying effects?

I am creating a slideshow video using images with up to 18mp. The images look wonderful clear and sharp until I try and add video effects to the slide, like zooming in or panning.
I am a user of both CS5.5 at work and newly acquired CS6 for home. I like what I have been able to do, however this makes me very frustrated when everything looks good except for the images with effects. Should I be applying effects differently? or what?
Thanks,
G

>Didn't mean to start an argument
= Little Devil with a Grin !!!
Stick around for awhile... there is OFTEN a good deal of "healthy discussion" (ie-disagreement) that goes on here
That discussion brings out a LOT of different experiences (you say X doesn't work... but it works just fine for "me") that sometimes, maybe even often, leads to increased and/or new knowledge for everyone
Other times, you just need to realize that what works for "me" may, or may not, work for "you" exactly the same way based on your work flow
Read what everyone offers, try what you can... and make LOTS of notes so, over time, you will develop work practices that work best for you
Personal example...
Many people export out of PPro as MPEG2-DVD to then use Encore to author a DVD
My PERSONAL work flow is to export my AVCHD edits to Widescreen DV AVI to give to Encore... so I may use Encore's Automatic Transcoding setting to make a "best" fit of video length to size (single or dual layer) of DVD
This is because I just don't care to get into all the details of figuring out the PPro settings when exporting... I let Encore do all the math for me
That process works just fine for me... other people want to figure out their own math for the PPro export settings
I say what I do, and why, but I certainly do not TELL anyone else that they MUST do it my way

Audition 6 Crashen when previewing or applying effects

Hi
I recently installed the Creative Suite Master Collection CS6 Windows version of my new Retina MacBook pro (new 13" model) and I'm having a few problems with Audition. The main problem is that when applying effects (like a FFT filter or Stretch and pitch) Audition would crash when trying to either preview the effect or apply it.
One example is when trying to change the pitch of an audio file. Normally I use “Audition” as the algorithm rather than iZotope. Audition would crash when previewing the effect or when trying to add it. It doesn’t crash when using the iZotope algorithm. It also happens if I try to apply reverb effects too.
This Macbook Pro I’m using is running Windows 7 Pro x64 via Bootcamp. I don’t have a lot installed on it atm & both windows & the master collection are fully activated. I had an older Macbook that never had this problem before. I’ve also tried Audition from CS5.5 on Mac OS X & it doesn’t have this sort of problem.
These are the errors that show up acording to System info.
21/11/2013 11:37 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xe38
Faulting application start time: 0x01cee7126c7bcb50
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: d7646e70-5305-11e3-b2ec-b8e8562f706d
21/11/2013 11:15 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x12b4
Faulting application start time: 0x01cee70f7f3697c8
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: cbcd68a9-5302-11e3-b2ec-b8e8562f706d
21/11/2013 11:12 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x4b8
Faulting application start time: 0x01cee70f04570245
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 561403a2-5302-11e3-b2ec-b8e8562f706d
21/11/2013 11:10 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xe6c
Faulting application start time: 0x01cee70ec8477f12
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 10929c0c-5302-11e3-b2ec-b8e8562f706d
21/11/2013 11:06 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x658
Faulting application start time: 0x01cee70e4b5727b1
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 9236f4ba-5301-11e3-b2ec-b8e8562f706d
21/11/2013 11:04 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xa8c
Faulting application start time: 0x01cee70dccc70c7b
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 4257ff4b-5301-11e3-b2ec-b8e8562f706d
20/11/2013 11:06 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x820
Faulting application start time: 0x01cee645220cb493
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 744a4280-5238-11e3-b707-b8e8562f706d
20/11/2013 11:58 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0xd9000001
Faulting process id: 0x760
Faulting application start time: 0x01cee5e7d393c02e
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 1c32aef1-51db-11e3-9a73-10ddb1d3a475
20/11/2013 10:21 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.0.708, time stamp: 0x4f70c4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xb14
Faulting application start time: 0x01cee5da3fe7841d
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 952a0ad5-51cd-11e3-8ec8-b8e8562f706d
20/11/2013 8:15 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x85c
Faulting application start time: 0x01cee5c8a7034e04
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: fc3e6fae-51bb-11e3-a467-10ddb1d3a475
20/11/2013 8:02 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x71c
Faulting application start time: 0x01cee5c6b5872308
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 1b3c52ed-51ba-11e3-8f54-b8e8562f706d
20/11/2013 7:56 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0xd9000001
Faulting process id: 0xdd4
Faulting application start time: 0x01cee5c5b4d6e335
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 38bf67dd-51b9-11e3-8f54-b8e8562f706d
20/11/2013 7:53 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x45ef2b00
Faulting process id: 0xfb8
Faulting application start time: 0x01cee5c5994aed2a
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: e41b8eed-51b8-11e3-8f54-b8e8562f706d
20/11/2013 5:23 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x11f4
Faulting application start time: 0x01cee5b0a915ab6d
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: f2af723e-51a3-11e3-b13b-b8e8562f706d
20/11/2013 4:31 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x10d8
Faulting application start time: 0x01cee5a7a7709775
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 9c86583e-519c-11e3-a64a-b8e8562f706d
20/11/2013 4:15 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x1390
Faulting application start time: 0x01cee5a6f5c8b771
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 589c80cd-519a-11e3-a64a-b8e8562f706d
20/11/2013 4:13 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x57c
Faulting application start time: 0x01cee5a6dc71a5dd
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 2803eecc-519a-11e3-a64a-b8e8562f706d
20/11/2013 4:13 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xc14
Faulting application start time: 0x01cee5a680b2c167
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 12d672bd-519a-11e3-a64a-b8e8562f706d
Heres what shows up on my Audition log.txt file
Log file created: 22/11/2013 10:14:59 AM
Ticks = 0      <2912> <AuLog.Startup> <5> Application: Audition
Ticks = 0      <2912> <AuLog.Startup> <5> Version 5.0.2
Ticks = 0      <2912> <AuLog.Startup> <5> Build: 7
Ticks = 78      <2912> <AuLog.Startup> <5> AuUI initialization sequence started...
Ticks = 78      <2912> <AuLog.Startup> <5> Initializing Crash Recovery
Ticks = 78      <2912> <AuLog.Startup> <5> Previous Crash Detected!!!
Ticks = 2044      <2912> <AuLog.Startup> <5> Initializing AuDSP
Ticks = 2044      <2912> <AuLog.Startup> <5> Initializing AuBackEnd
Ticks = 2138      <2912> <AuLog.Startup> <5> Initializing AuApplication
Ticks = 2247      <2912> <AuLog.Startup> <5> AuApplication initialization sequence started...
Ticks = 2247      <2912> <AuLog.Startup> <5> Initializing XML Loader
Ticks = 2262      <2912> <AuLog.Startup> <5> Initializing Application Settings
Ticks = 2262      <2912> <AuLog.Startup> <5> Intializing dva unit test and console
Ticks = 2262      <2912> <AuLog.Startup> <5> Initializing Audio Device
Ticks = 2325      <2912> <AuLog.Startup> <5> Initializing XMP System
Ticks = 2340      <2912> <AuLog.Startup> <5> Initializing AMIO Host
Ticks = 2340      <2912> <AuLog.Startup> <5> AMIO Host initialization sequence started...
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioAiff
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioApe
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioLSF
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioMp2
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioMp3
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioQT
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioWav
Ticks = 2340      <2912> <AuLog.Startup> <5> AMIO Host initialization sequence complete.
Ticks = 2340      <2912> <AuLog.Startup> <5> Session Host initialization sequence started...
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: FinalCutXML
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: LegacyXML
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: OmfSession
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: PremiereProInterchange
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: SesxNative
Ticks = 2340      <2912> <AuLog.Startup> <5> Session Host initialization sequence complete.
Ticks = 2340      <2912> <AuLog.Startup> <5> Initializing Clipboard Manager
Ticks = 2340      <2912> <AuLog.Startup> <5> Initializing Preset Manager
Ticks = 2372      <2912> <AuLog.Startup> <5> Initializing Favorites Manager
Ticks = 2372      <2912> <AuLog.Startup> <5> AuApplication initialization sequence complete.
Ticks = 2372      <2912> <AuLog.Startup> <5> Initializing AsyncQueueManager
Ticks = 2372      <2912> <AuLog.Startup> <5> Initializing AuUI
Ticks = 2403      <2912> <AuLog.Startup> <5> Setting up temp directories
Ticks = 2528      <2912> <AuLog.Startup> <5> AuUI initialization sequence complete.
Ticks = 2652      <2912> <AuLog.DisplaySurface> <5>     Initialize PRM
Ticks = 2652      <2912> <AuLog.DisplaySurface> <5>     Initialize DS
Ticks = 2652      <2912> <DynamicLink> <5> Attempting to launch dynamiclinkManager
Ticks = 2652      <2912> <DynamicLink> <5> C:\Program Files (x86)\Adobe\Adobe Audition CS6\dynamiclinkmanager.exe
Ticks = 2746      <2912> <AuLog.DisplaySurface> <5>     DS Initialize succeeded
Ticks = 2746      <2912> <AuLog.DisplaySurface> <5> Video Panel is using the Display Surface
Ticks = 2918      <2912> <AuLog.Startup> <5> Initializing AuScripting
Ticks = 13214      <2912> <AuLog.Plug-in> <5> Loading AMIO plug-in: AmioWav
Ticks = 13229      <2912> <AuLog.Plug-in> <5> Audition Wave Amio plug-in. ID: 60df8553-00c8-4fd7-8a07-6f25e30ab79c
Ticks = 17332      <2912> <AdamEveAudioComponentEditorView::SyncParameters> <5> (from component) parameter out of range: index = 19, value = -0.251256
And here are some quick specs acording to System info
Item Value
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name CHRISNEWMBOOK
System Manufacturer Apple Inc.
System Model MacBookPro11,3
System Type x64-based PC
Processor Intel(R) Core(TM) i7-4850HQ CPU @ 2.30GHz, 2301 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/Date Apple Inc. MBP112.88Z.0138.B02.1310181745, 18/10/2013
SMBIOS Version 2.4
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume4
Locale Australia
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name ChrisNewMBook\Chris New MBook
Time Zone AUS Eastern Daylight Time
Installed Physical Memory (RAM) 16.0 GB
Total Physical Memory 15.9 GB
Available Physical Memory 13.5 GB
Total Virtual Memory 31.8 GB
Available Virtual Memory 29.3 GB
Page File Space 15.9 GB
Page File C:\pagefile.sys
The sound hardware found on this Macbook is a Cirrus Logic CS4208 (AB 94). Atm I'm using the stock drivers included with Bootcamp. Also, both Windows & adobe software are all up to date.
Can you please help me out?
Thank you

Because my main computer is a PC with CS6 & i'm usiing my macbook as a secondery PC. Yes I could use the mac version but all my projects are done on CS6 while I have CS 5.5 on the mac partition. Plus I'm not interested in updaing to CS6 for mac (if it's possible since ny CS5.5 is an upgrade from CS5).
Anyway I just want some help fixing up Audition for windows.

Applying effects to a small section of a track in Multi-track view, not recordin automation properly

Similar Messages

Maybe you are looking for