Applying Filter Levels is crashing FCP 6

Applying level filter to one of the streams when I switch to that stream FCP crashes. Now I need to select all the cuts manually and apply the filter. It doesn't happened using color correction filter.
II have 6GB of RAM. Is this enough?

May just be over-taxing your system. I always apply filters to my locked/collapsed multiclip...shot by shot.
For your situation, just cut the full mutliclip, collapse it, set your 'level' filter settings on one clip, control-clcik/copy the filter. Then do a timeline search for that 'clip', select 'from in to out'/'find all'. Then control-click/paste attributes/filters to the group of selected clips.
K

Similar Messages

PSE 10 crashes when applying filter

Steps to reproduce
1. Load image (In my case .NEF file)
2. Select Smart Brush (either one)
3. In the options bar, select Show All > Florescent Chalk
4. Apply filter. Elements starts creating multiple layers and than crashes.
Can reproduce this every time and so far only with the Florescent Chalk filter. (Crashes with Raw and jpg)
Windows 7 64 bit, 8GB mem, GeForce GTX 275 video

The action Florescent Chalk should still show up for the Smart Brush Tool under show all.
I had to start pse 10 up a second time before it would show (that's without rebuilding the media data base file)
I think the updated action was just to address the crash with the smart brush tool and it would probably take a major rewrite of the action
to enable it to work with a selected part of a layer and with the smart brush tool at the same time (the two effects use the same action), as
most of those image effect actions are quite old and some haven't been changed much since photoshop 4 (the first photoshop version with actions around 1996/97).
You should be able to make a selection on the layer, new layer via copy, then run the action from the effects panel for a similar result as just making a selection on a layer.
MTSTUNER

Boris Red 3.05 Transition Crashes FCP 5.12

I never had problems with Boris FX, but after upgrading FCP to 5.12 nothing shows in the browser. I reinstalled Boris Red and Applied the patches from Boris site, it works when I applied the filter, but when I apply transition and double click on it than it crashes.
I called Boris Support for weeks, and finally they have sent me an email that made no improvement what so ever.
Does anyone know the solution?
Thanks,

I recently crossgraded from FCP5.0.4 to 5.1.2 on my Quad core G5 and my 17 G4 powerbook. Botis Title 3D completely crashes FCP on the G5 when attemting to create text. It works fine, though, on the G4 (???) I have trashed prefs, repaired permissions, reinstalled Boris only, reinstalled FCP. Apple tech support doesn't care! The Boris tech guy got so flustered with me he dropped his little headset on the floor. I have researched every applicable forum on the net and see that I am not alone. Notice that the first post in this thread is from early November. It is now almost February. No real solution. I love the "sibling" style behavior between the host app. co. (Apple) and the 3rd party co. (Boris) ..."It's not MY fault its HIS!!" "Is NOT" "Is TOO!"
I guess my problem is that I just need to pony up that $700.00 for Apple's "Pro applications technical support"
...maybe I should have purchased Edius Broadcast...
G4 17" Powerbook Mac OS X (10.4.6)

HUGE JPEGs crashing FCP

Ok, I'll start off by admitting I made a nubie mistake scanning photos in at exorbitant PPIs resulting in TIFFs that were hovering around 1GB, yes that GIG, and the largest file being 1.58GB. I've since gone through, and exported them to JPEGs resulting in file sizes about 10% the originals. However, that largest file is still giving FCP problems. Most other jpegs, from 2.7MB to 65.7MB results in a green render bar under Unlimited RT on my 2.16 Core Duo MBP with 2GB of RAM. Now when I go over that, with the 3 files that are 77.3, 86.6, and 115.8MB, the images get an orange render bar and result in crashing FCP. I read in a previous thread that it was a memory issue, and that was confirmed when I went to play one of the images in the Viewer and I get Error:Out of Memory. So I jacked the memory, all of it. Application was always listed as 100%, but now I have Still Cache also set to 100% and Disk set to 10,000K and RAM at 1,000K, but this still hasn't fixed my issue. I've tried every way I know of to render this image, and they all quit FCP. Before I raised the memory, just placing the file in the timeline would cause a crash, so at least now it gets past that. If I let it auto render, crash. If I do it manually, crash. If I make a new sequence like David suggest in a previous thread, you better believe it crashes. The interesting thing is despite raising FCP's memory usage, Activity Monitor still shows 1.04GB of free RAM, so if FCP is Out of Memory, why doesn't it just use up that 1+GB? Does anyone know why FCP can't play with such large files?
I guess I'll just need to recompress the few images again, but it's VERY annoying. At least I'm not trying to work with the 1.5GB image.
-Brian
By the way, I am on Final Cut 5.1.4.

You can reduce the cache levels and history states in Photoshop's memory preferences. This will buy back some memory. You should quit and restart Photoshop after each major image resize. This will also keep the app from building up too much cache.
I'll assume these are PSB format, rather than PSD. PSB's don't work the same as PSD's with scratch disk. You may need a separate scratch disk if you keep getting errors. Designate your fastest largest drive to do this.
You really need to get them down to around 1000x1000 pixels to be truly fast in FCP.
Don't forget that Photoshop has a new tool called Image Processor under File/Scripts/ that can size documents without really having to rasterize them. It works much faster than opening the file then running a resize. But be careful to just run 1 or 2 at a time, since I've found that it doesn't do a great job at purging the memory after each image. You will run out of memory quickly if you have too many files at once.
Remember to quit and restart Photoshop, or even you machine if it really slows to a crawl. These are signs your hard drive is full and relaunch and reboot will clear all the temp files from Photoshop's scratch disk.

File Crashing FCP - Can import from different tape brand be at fault?

I always use Sony Premium mini DV tapes and import my video through my Sony DSR-11 miniDV deck into FCP.
I was recently handed a Fujifilm miniDV tape. The video imported fine. But once I dragged it to the timeline, rendering any transitions or filters caused big gray boxes to appear on the video. Sound also fell. I was able to make it work - but the exported file retained the boxes at different places each time I exported.
Now the file doesn't open at all and it crashes FCP. All other files on my system still open and export fine except for this one.
My question is 1. whether the change of tape brand can cause the import to go haywire.
and 2. Is there any way I can open this file? I trashed preferences and restarted with no luck.
Any suggestions ar emuch appreciated. Thanks!
Dual 1.8 GHz G5 Mac OS X (10.4.8) 4 GB DDR SDRAM

I've never had the same experience, so this is purely speculation.
Changing brands used in the same camcorder has been reported as the cause of recording & playback problems. But, since the playback from the DSR was okay, I'm guessing the brand isn't the problem.
Could be the camcorder settings don't match your FCP settings?
What if you copied the Fuji tape to Sony tape in your camcorder. That way you would have control of both the tape and the camcorder settings.

Few values of report column do not display in report while applying filter

Post Author: anuragg11
CA Forum: WebIntelligence Reporting
There are 6 drill filters applied on the report to filter out the report column data. Few values of the report are not displaying in the report when using drill filter. Same issue is with report filter too. If filters are removed then values are appearing in the report. We are using version BO XI R2 & Java runtime JRE 1.4v. It doesn't look issue is with Java version because only few specific data of the report column are not shown in the report when using filter on the data. Example: One of Report data column contains below values: 24.2, 26.9, 120.1, 230, 274.9, 275.8, 333.2 Report is displaying all these values when there is no filter on any data. But report doesn't display data when applying filter on 274.9 or 120.1 howver filter on other values 24.2, 26.9, 230, 275.8, 333.2 are working fine.

Hello,
I think i know what your problem is.
Although in table view your 2 requests combine perfectly and show separate results in pivot view BI unfortunaterly adds them up.
One work around would be to go in your criteria add in each request a dummy column. This can be obtained the following way:
1. click on a column to add it in the criteria (it doesnt matter which one)
2. go into the edit formula of that column
3. delete the formula and in its place write 'Dummy Column 1'
Do the same for the second request by adding a "Dummy Column 2'
Now the Pivot Table should also show up correctly
Let me know if it goes well or if you have any further questions,
Kostis

Selecting a column in Answers report based on user prompt/ apply filter

I need to do the following in OBIEE Answers report (version 10.1.3.4.1):
1) Think of a simple table with dim TX_type and some measures like month_jan, month_feb, month_mar
so the fact table looks like (column names) tx_type, month_jan, month_feb, month_mar
2) I need to select the measure column based on a user dashboard prompt, prompt populates a presentation variable var_month = jan or feb or mar
3) I need to select the correct measure (one of these month_jan, month_feb, month_mar) and then apply column filter based on the dim TX_type to split the values of these into multiple columns for report. So the report may look like (in Answers)
Sales , Tax, overheads
where Sales may be defined as sum(month_jan) where rows have TX_type = 'sales'
where Tax may be defined as sum(month_feb) where rows have TX_type = 'tax'
where overheads may be defined as sum(month_mar) where rows have TX_type = 'overheads'
IF the user selects jan
IF user selects Feb then the 3 report columns are based on month_feb and likewise for month_mar
I cannot use column selector option as the report column further apply filter in column filter definitions in Answers...
4) When I try to build the column filter using a presentation variable (var_month), the presentation variable is not getting populated in the column filter.
For e.g. IF var_month = 'jan'
THEN month_jan (let us assume the logical column name is month_jan too)
ELSE month_feb and so on...
However, the var_month always shows 0 in the IF clause. If we used a repository variable instead, it works fine. But since repostory variable cannot be changed on the fly (by user prompt) it is not usable.
We cannot change fact table defintion....and we have 12 measures column and about 8-10 different colum filter based report columns using this measure.

Hi shyamvaran,
have you thought about a SQL statement in the prompt, something like:
SELECT
case when 1=0 then Table."Column" else 'Jan' end
FROM "Subject Area"
union
SELECT
case when 1=0 then Table."Column" else 'Feb' end
FROM "Subject Area"
union
SELECT
case when 1=0 then Table."Column" else 'Mar' end
FROM "Subject Area"
union
SELECT
case when 1=0 then Table."Column" else 'Apr' end
FROM "Subject Area"
etc...
Use this to give you the 12 values for your months then give the prompt column a presentation variable name and set a default value in the 'Default To'. Also set the same default value for the filter.
A couple of points:
1. If you're transforming the presentation variable from 'Jan' to 'month_jan' you may need to edit the syntax for the filter column (not using the dialog box).
2. If you're transforming the behaviour of a dimension / measure column in the report, have you specified the syntax correctly, e.g. sum('@{pres_var}')?
Hope this helps,
Justin

Thumbnail view crashing FCP -- Kona3 the problem?

For larger projects, running bins in thumbnail view crashes FCP.
Most of the time, I'm editing 6 to 8 min. stories for a news magazine format show. We shoot on Sony XDCAM, so usually 2 or 3 disks per project (roughly 44 mins of HD viddy per disk, with anywhere from 20 to 120 individual clips on the disk).
However, for our documentaries (either 26 mins or 56mins) we shoot between 30 to 45 disks full of content. When importing the disks into FCP7, we use a bin per disc, translating into an average of 80 clips per bin. Whenever a project is this big, I can only open 3 or so bins in thumbnail view. After that, the system crashes. Even if I only keep one bin open at a time, by that fourth bin, the system crashes.
We are using a KONA3 card configuration.
Anyone else seen this?

PROBLEM IDENTIFIED (NOT SOLVED):
I've had this problem with thumbnail images crashing FCP after opening bins for over a year now and when going back using footage from old projects it happens more frequently. I can open 2-4 bins before it will crash FCP completely.
TROUBLESHOOTING IN THE PAST:
- Dumped Prefs
- Re-installed FCP
- Formatted & Re-installed EVERYTHING (OSX included)
- Increased thumbnail cache size
- Created new projects & bins, etc.
CONCLUSION:
None of the above troubleshooting strategies worked. Increasing the thumbnail cache size may appear to work a little but problem persists with little improvement.
HOW I IDENTIFIED THE PROBLEM:
Only recently have I been working with other formats aside from XDCAM. I've recently incorporated more ProRes files into my most recent project of T2i footage from the Canon DSLR camera. If I open a bin and display thumbnails of the ProRes video clips everything works without a problem. Loading thumbnail bins with the raw .mp4 files also works fine. Only loading XDCAM files will cause FCP to crash. The problem has nothing to do with the Kona card. If you read the posts carefully here and elsewhere you will see the common denominator is the XDCAM encoded video files being displayed as thumbnail icons.
I am using XDCAM EX files at 1080p 30fps. To further isolate this problem as something having to do with the XDCAM files, another user posted on another thread:
*"I am having similar issues with two separate projects. The only commonality between them is XDCam.*
*To possibly isolate it I reinstalled FCP on one system, and installed latest Blackmagic driver on the the same. Both systems are up to date visa vi OS, FCP, and QT.*
*Both still crash with the same regularity as described here."*
Apple, this problem has persisted for more than two years and is a major problem. Just search the forums including this one. Any further upgrades of Final Cut Studio or OS X are worthless until this problem is fixed. A brand new body and interior won't fix a car with a broken engine. Please help!! Please solve this issue with the XDCAM footage in FCP!
If anyone has any solutions or work arounds please notify me. I need it!
[email protected]
/\/\ichael
Message was edited by: MichaelRev1412
Message was edited by: MichaelRev1412

XML Crashing FCP while importing. Magic Bullet Looks could be the problem

Hi All,
Need a little help here.
I am using FCP 6.0.5 on a power mac G-5.
I am trying to open an XML which was exported out of FCP 7 as a version 4 XML.
Magic Bullet Looks is being used on the project, and I think this is were the problem is.
when importing the XML it crashes FCP when I select the Include Video/Audio Effects.
When I import the XML without this option selected it opens fine.
I have MB Looks Installed on machine, so the Plugins are there.
Just wanted to see if anyone has dealt with this issue or might have any insight to the problem.
I can post the Crash info on the specific thread if that can help.
Thanks!

Couldn't agree more Jim - hence why I'm not using Snow Leopard yet as I had a nightmare in the early adoption of an older operating system. As for MBL, there seem to be many using it without problems so I don't think it's an issue with the product per say and it really is a very good plug-in. (That view will change to excellent once the problems go away) I just need to get to the bottom of which square peg is destined for which round hole and I'm hopeful that all will be well. I've also submitted a support question to Magic Bullet so will update if I get a solution. I like the CleanApp idea. I'll try that as well. (and I may even give Snow Leopard a go!)
R

Rendering Sequence with Motion 3 Template Crashes FCP

I am using a template with 8 drop zones from Motion 3 in FCP 6.0.2. The template is used about 10 times end to end with a slight overlap. As FCP renders the sequence about 23% of the way through it crashes FCP. The templates contain still images - no video.
Any thoughts? (Besides don't use templates)
Thanks!

Joe,
You might want to post this in the Motion forum
http://discussions.apple.com/forum.jspa?forumID=656

AVCHD files crashing FCP using Perian

Hi everyone, I'm wondering if anyone can help with a rather hard to pin down issue.
AVCHD files on a SD card recorded on a Panasonic broadcast camera have started crashing FCP on random file transfers (log and transfer window), say I have 30 clips to transfer, it'll freeze then crash the system on clip 22 but the other clips will be fine.
I have had a look at the report window and it says' Perian has unexpectedly quit' (why the **** are apple using third party software to do the job) and the log is just code to me.
I first suspected the camera an AG HMC151 (150) because I have two so it was easy to just test the other one, but it does it on both.
Then I suspected the cards, it does it on all of them.
So I can only assume it's the macs, of which I have two, both have 10.6.6 and I'm running FCP 6.0.6. they are both about a year old.
Because this is a random problem it's actually rather stressful as this is my living.
If anyone has any good ideas or has experienced this please let me know, I think I have mentioned everything I know and apologise if I have left out some piece of vital info.
Thanks

I've been having the same issue with importing AVCHCD footage from my Sony NXCAM. Through some major digging, I discovered someone else in another forum recommend the program Clip Wrap 2 (which I see someone also recommended above). I downloaded it just now and it works GREAT for creating useable clips. Highlight recommend.
http://www.divergentmedia.com/clipwrap

AVCCam Crashing FCP

Hi,
Just back from Cannes where my latest short film was picked up by a distributor...aside from that great news, back to reality:
I'm just trying to load in some footage from the new HMC151 panasonic AVCCam.
However, everytime I try log and transfer it crashes FCP saying there's a problem with Perian. I've tried different Macs, card readers, using the camera as the reader etc, but the clips won't load in.
I tried shooting in 720/25p and the clips came in fine, but that doesn't help the fact I have a card full of 720/50p clips I need to get in and edit.
Any ideas? How do I remove Perian to get that out of the equation?
Help as always appreciated.
Kenny.

It has an uninstaller.
Look in the system preferences.

How to capture the values after applying filter in ALV.

Hi,
I have an ALV in my application with 10 projects displayed. Out of those 10 projects, 5 projects have banking as industry.
when you filter the ALV based on industry banking I get 5 projects .In run time how can I capture only these 5 projects. when I debugged and saw the ALV table node is holding 10 prj not 5 prj.
How can read only those 5 values. Kindly help me out with sample code.
Thanks,
Priya

Hi,
The class name is correct - CL_SALV_WD_FIELD. When you refer the model object(CL_SALV_WD_CONFIG_TABLE-IF_SALV_WD_FIELD_SETTINGS) this will return the field for which
you have applied filter by passing the field name.
Before you try out this approach, check the ALV event ON_CELL_ACTION fro that column name to capture the filtering value. Based on this loop at the table where field eq <<filerting value>> and get the filtered records.
As you have get_static_attributes_table it deosnot return the filtered values.
Regards,
Lekha.

Sequences crash fcp

so we're transitioning from fcp 5.0.4. on a g5, 10.3.9 to fcp 6.0.4 on an intel, 10.4.11. i've got all my old fcp sequences transfered over along with all the necessary files. however, there are some projects that have troublesome sequences that crash fcp whenever i try and open them. the projects are updated and open fine. but when i try and open up certain sequences, they'll open up in the timeline and immediately crash fcp.
i tried copying all the files in the project to a new project. i deleted the old project file and resaved it under a new name. i saved and restarted fcp. still have the exact same problem. what's going on? am i never going to be able to open these sequences again? cause they're kinda important.

so your guess is that it's an operating system issue? and you don't think it could be anything else? i suppose that does make sense since the issue makes no sense at all, but just wanna confirm before thinking about spending more money.

How to apply row level security against the database administrator

I would like an advice in applying row level security against the database administrator. We need to prevent DBA from editing data in some table rows or have any indication that data was corrupted.
There is no problem in viewing the data so we considered one way hash function or digital signature which will be stored in the same table, but we see following disadvantages:
HASH - DBA may use the same hash function to update the stored data after he changes the sensitive row.
Digital signature - the is a need to manage and keep the private key in a safe place outside of DB
Is there additional ways to achieve the aim?

Does VPD helps to prevent from DBA to edit/view a data in specific rows?Yes.
If I correctly understand, DBA has full access to security policy used by VPD to control the access and can grant himself privileges that I don't want.You can to define which users can be exempt of the politics, for the context or by Grant EXEMPT.
This includes DBAs.
The simple fact of being DBA doesn't guarantee the exemption.
Everything goes to depend of the VPD config.

Applying Filter Levels is crashing FCP 6

Similar Messages

Maybe you are looking for