Applying NW 7.01 SP6 to  ERP EHP4 SPS5 (NW7.01 SP5) - what do you think?

Hi
We have just implemented ERP (ECC) EHP4 SPS5 with NW7.01 SP5.  Unfortunately (for us) we have found some functionality that is delivered in NW7.01 SP6 .  Our next major maintenance period is next year.
I would like to just apply the NW7.01 SP6 without implementing EHP4 SPS6 for ERP.
I understand that this would not be consistent with the SP Stack concept but has anyone done something similar or found a note with more information about the interdependencies of NW7.01 and EHP for ERP?
Thanks in advance.
Doug

SAP have confirmed that this is OK if all Basis Components SP6 are applied.

Similar Messages

  • EHP4 FOR SAP ERP 6.0 / NW7.01

    I am new to SAP and have successfully Installed SAP ERP 6.0/NW 7.01 on Windows Server 2008 R2 with Oracle 10g. We would like to go ahead and apply the enhancements Package 4 to ERP 6.0 (SAP Enh. Package 4 for SAP ERP 6.0 1). I have no knowledge on how to install Enhancement packages.
    Can someone please guide me on what is needed. What program or utility I can use to apply the EHP4. Any tips or direction would be would be nice.

    Hi Amirsd,
    You will need to use your Solution manager system to apply EHP 4 to your newly installed system.
    Use MOPZ to generate XML file which contains the packages to be downloaded to upgrade your current system to EHP 4.0
    After that download EHPI tool from SAP Marketplace and use EHPI tool to install downloaded packages.
    It would run in 7 phases including downtime phase.
    Let me know if you have any queries. !!!!
    Regards,
    Shobhit Garg

  • CRM 5.0 Compatibility with backend upgraded to EHP4 FOR SAP ERP 6.0 / NW7.0

    Hello,
    What are the  compatibility issues for EHP4 FOR SAP ERP 6.0  Upgrade with CRM 5.0 ? Are there any OSS notes to address upgrade specific issues?
    Following are the System Details:
    Upgraded EHP4 FOR SAP ERP 6.0 / NW7.01
    Component: SAP_APPL 
    Release:      604
    Support Pack: SAPKH60402
    Level:  0002
    Existing CRM 5.0
    Component:     BBPCRM
    Release: 500
    Support Pack: SAPKU50006
    Level: 0006
    Thanks,
    AG
    Edited by: Arijeet Ganguly on Sep 15, 2009 11:49 PM

    Hi Amirsd,
    You will need to use your Solution manager system to apply EHP 4 to your newly installed system.
    Use MOPZ to generate XML file which contains the packages to be downloaded to upgrade your current system to EHP 4.0
    After that download EHPI tool from SAP Marketplace and use EHPI tool to install downloaded packages.
    It would run in 7 phases including downtime phase.
    Let me know if you have any queries. !!!!
    Regards,
    Shobhit Garg

  • ERP 6 NW 7.0 upgrade to NW 7.01(NW EHP1) + ERP EHP4

    is here anyone who has successfully upgraded/updated ERP 6 NW 7.0 with NW EH1 + ERP EHP4 (as sap suggests in guide. I really need only NW EHP1)? There are a lot of questions about this process and sap-EHPI and how to do it, and I need this info from someone who has done this, not some links to notes which i red already some 10 times or pdf guides. I have pretty simple questions and I need direct instructions.
    server is ABAP+JAVA with portal.
    any help appreciated

    Hi
    You must apply Netweaver EHP1 for EHP4 ERP, this is a recommendation of sap that you have a lastest patchs and kernel. If not you system could have inconsistenses.
    Now, I update my ERP 6.0 to EHP4 with EHP1 for SAP Netweaver.
    regards
    William Neira

  • ERP EHP4 causing dump when posting invoice in MIRO

    I originally posted this in the MM forum but was advised to move it here.
    We just implemented ERP EhP4 w/SAPAPPL603 and are now getting a dump when using MIRO to posting a vendor invoice against a PO. The error seems to involve new logic for multiple account assignment introduced with this EHP. The dump is in include LMRMBWF02 of SAPLMRMBM, and indicates that data object S_MCRBPO does not contain component XHISTMA. The lines in LMRMBWF02 are (starting at 772):
    FORM bw_read_co_history_dyn_sub USING event TYPE bwmode
    s_index_mcrbpo TYPE eval_iv_index_key_s
    s_mcrbpo TYPE mcrbitm
    CHANGING s_mcrbco TYPE mcrbco.
    DATA: s_ekbe LIKE ekbe,
    s_ekbz LIKE ekbz,
    s_ekbz_ma TYPE ekbz_ma, "MAA EhP4
    s_ekbe_ma TYPE ekbe_ma, "MAA EhP4
    f_arewr TYPE ekbz-arewr, "MAA EhP4
    f_areww TYPE ekbz-areww. "MAA EhP4
    CASE event.
    WHEN c_recompilation.
    IF s_mcrbco-xunpl = space.
    Not for unplanned account assignments
    IF ( s_mcrbpo-exkbe = 'X' ).
    Read PO history for goods item
    IF s_mcrbpo-xhistma = space. "MAA EhP4
    ...with the last line being the culprit. The actual break in execution occurs at line 119 of SAPLMRMP, BESTELLUNG_BUCHEN where function MRM_BW_PO_HISTORY is called.
    Had some other errors where tables weren't properly activated after the EHP installation, but here most everything seems to be activated properly. The exception is table EKBE, which activates but with warnings about missing enhancement categories of tables or includes/subtypes for four active dependent tables. That's the only lead I've got.
    Can't find any notes or other posts about this error, any ideas would be greatly appreciated!

    Hi,
    the only thing i´ve found is this OSS Note:
    https://service.sap.com/sap/support/notes/1105679
    Best regards.

  • HA Installation of ERP EHP4 on AIX and DB2

    Dear All,
    I have to do a HA installation of ERP EHP4 system on AIX and DB2. I have followed the standard inst.guide from SAP but I want more information. Can anyone help me in understanding how to go about installing HA in detail. I would be very grateful if anyone can provide me a guide/document of what and how they have done. Can you pls explain me the steps.
    I also have few questions
    1. Shall i do a Central installation or distributed installation ( meaning CI, ASCS and DB in one server failover to other; CI,ASCS on one server and DB running on different server which in case of failure will move to other server)
    2. I know that OS team will do the cluster configuration but is there any other software to be bought for an automatic switchover in case of failures?
    3. Mainly, as a BASIS consultant what is our role in HA configuration?  What file systems should be defined and nfs mounted?
    Request you to take time and answer. Thanks in Advance.
    Lastly, i hope this is the right forum. If not , please let me know.

    Hi,
    >
    > 1. Shall i do a Central installation or distributed installation ( meaning CI, ASCS and DB in one server failover to other; CI,ASCS on one server and DB running on different server which in case of failure will move to other server)
    >
    I think you did not get basic of HA installation. Its neither central nor distributed installation. You need to install CI and Dialog Instance locally on 2 nodes. DB and ASCS instance on the disk that will move across 2 nodes.
    > 2. I know that OS team will do the cluster configuration but is there any other software to be bought for an automatic switchover in case of failures?
    >
    OS team will do file system config so that file system having ASCS and DB should move across 2 nodes. And rest of the file system should be local.
    After installation making cluster movement automatic both OS and SAP Basis guy have to work together.
    > 3. Mainly, as a BASIS consultant what is our role in HA configuration?  What file systems should be defined and nfs mounted?
    >
    I would say primary role in HA installation is of Basis guy. Because he is the person who will decide what approach will you take to install HA either active-active or active-passive. Its you on whom requirement OS guy will work.
    Thanks
    Sunny

  • ERP EhP4 causing dump in MIRO posting

    We just implemented ERP EhP4 w/SAPAPPL603 and are now getting a dump when using MIRO to posting a vendor invoice against a PO. The error seems to involve new logic for multiple account assignment introduced with this EHP.  The dump is in include LMRMBWF02 of SAPLMRMBM, and indicates that data object S_MCRBPO does not contain component XHISTMA.  The lines in LMRMBWF02 are (starting at 772):
    FORM bw_read_co_history_dyn_sub  USING   event  TYPE bwmode
                                     s_index_mcrbpo TYPE eval_iv_index_key_s
                                     s_mcrbpo       TYPE mcrbitm
                            CHANGING s_mcrbco       TYPE mcrbco.
      DATA: s_ekbe LIKE ekbe,
            s_ekbz LIKE ekbz,
            s_ekbz_ma TYPE ekbz_ma,                             "MAA EhP4
            s_ekbe_ma TYPE ekbe_ma,                             "MAA EhP4
            f_arewr TYPE ekbz-arewr,                            "MAA EhP4
            f_areww TYPE ekbz-areww.                            "MAA EhP4
    CASE event.
        WHEN c_recompilation.
          IF s_mcrbco-xunpl = space.
    Not for unplanned account assignments
            IF ( s_mcrbpo-exkbe = 'X' ).
    Read PO history for goods item
              IF s_mcrbpo-xhistma = space.                      "MAA EhP4
    ...with the last line being the culprit.  The actual break in execution occurs at line 119 of SAPLMRMP, BESTELLUNG_BUCHEN where function MRM_BW_PO_HISTORY is called.
    Had some other errors where tables weren't properly activated after the EHP installation, but here most everything seems to be activated properly.  The exception is table EKBE, which activates but with warnings about missing enhancement categories of tables or includes/subtypes for four active dependent tables.  That's the only lead I've got. 
    Can't find any notes or other posts about this error, any ideas would be greatly appreciated!

    Per the recommendation I've moved this thread to the ABAP forum:
    ERP EHP4 causing dump when posting invoice in MIRO

  • RFC connections in SRM 7.0 = ERP EHP4 system setup

    Hello,
    In SRM 7.0 there is a lot being said about the combination with an ERP EHP4 system. I thought that certain capabilities of SRM <> ERP EHP4 in the area of RFC are not supported anymore. SAP is forcing XI/PI for this.
    When we migrate our R/3 system to EHP4 will we still be able to use the following RFC / iDOC communications?:
    - Purchase Request (R/3 > SRM)
    - Purchase Order (ECS, SRM > R/3)
    - Invoicing (SRM > R/3)
    - Confirmations (SRM <> R/3)
    Anybody has any experience with an EHP4 back-end system? Are there already any plusses for SRM?
    Kind regards,
    Tim

    Hi Rchard,
    SAP promised to release RFC functionalities instead of the current PI obligation for certain new functionality only available on SRM i.c.w. ERP EHP4 with the release of SRM EHP1.
    But what i'm asking is: with an SRM 7.0 (without EHP1, isn't available yet..) can we still utilize RFC for document exchange with R/3 (f.e. Purchase Orders) or does ERP EHP4 require PI?
    Kind regards,
    Tim

  • Select maintenance option for EHP4 FOR SAP ERP 6.0 / NW7.01.

    Dear Experts,
    We have solution manger 7.0 ehp1 ,
    ERP 6. 0 EHP4 Development server(seperate server) this is upgraded from erp 6.0 to erp 6.0 ehp4
    I configured the maintenece optimzer also. and created the RFC destinations also it is working fine. For downloading the support packages  In Miantenance optimizer I am getting the error.
    Select maintenance option for EHP4 FOR SAP ERP 6.0 / NW7.01
    I deleted the systems in SMSY and and recreated using the SLD refresh. Agin also I am getting the sama error for downloading the support packages. I chagned the systems details in the Service.sap.com also. in the logs it is showing the below error also
    No Addon Product Version allowed for transaction: EHP4 FOR SAP ERP 6.0 / NW7.01 (01200615320900003195)
    thanks

    Hello,
    we have the same error in our environment.
    Product version is EHP4 for ERP6.0 and we have both product version (EHP4 and ERP 6.0) active in the SMSY as described in SAP note 1464712 and nethertheless we get this error message.
    " No Addon Product Version allowed for transaction: EHP4 FOR SAP ERP 6.0 / NW7.01 (01200615320900003195)"
    Anyone with a solution here?
    Greets
    Jens

  • SYSTEM_NO_TASK_STORAGE DDIC_ACTIVATION upgrade to EHP4 SPS5

    Hello,
    When want to upgrade our system from SAP ERP 6.0 EHP3 SPS5 ( Windows 32 Bit with RAM 3Gb )  to EHP4 SPS5 with SAINT  we encountered the following Error in  DDIC Activation phase :
    The following details help you to analyze the problem:
         -   Error in phase: DDIC_ACTIVATION
         -   Reason for error: TP_STEP_FAILURE
         -   Return code: 0012
         -   Error message: OCS Package SAPK-60401INEAAPPL, tp step A, return
             code 0012
    In ST22 we have the following message :
    Runtime Errors         SYSTEM_NO_TASK_STORAGE
    Date and Time          20.05.2011 19:51:09
    Short text
         Unable to fulfil request for 3897444 bytes of storage space.
    We have adjut the following parameters but we still have the error :
    tta/roll_extension = 2000000000
    ztta/roll_area = 1000000
    ztta/roll_first = 1
    em/max_size_MB = 20000
    em/initial_size_MB = 2048
    abap/heap_area_dia = 2000000000
    abap/heap_area_total = 5000000000
    abap/heap_area_nondia = 2000000000
    We have also applied  /3GB in boot.ini for windows (recommendation Note 1275873 - Memory bottleneck during DDIC activation during EHP import ).
    Thank you for you help.

    The short-dump issue you are experiencing is a well known problem which uses to occur on 32-bit architecture system platforms;
    those short-dumps are a clear indication of a 'lack of memory (address space) issue'.
    When a program (or a transaction or a job) is running, the work process
    follows this memory allocation sequence (valid for Windows platforms):
       a) Roll memory up to the quota "ztta/roll_first"
       b) Extended memory up to the quota "em/address_space_MB"
       c) Roll memory up to the quota "ztta/roll_area"
       d) Heap memory up to the quota "abap/heap_area_dia"
    Short dumps like these ones arise when additional memory
    is required to extend the internal table, but none is available.
    Check these points :
    - make sure parameters values are set as indicated in Note 88416
    read the document "Optimizing the Memory Settings for
        SAP Systems on 32-Bit Windows" that you will find at:
        http://service.sap.com/~sapidb/011000358700006425762006E
    Also,
    - Enable the Windows startup option /3GB, as per Note 110172
    - Reduce the memory parameters rdisp/ROLL_SHM and rdisp/PG_SHM to
        6000 and check that other memory buffers like abap/buffersize have
        not been increased from default values.
    Note 110172 : Windows: Transactions with large memory requirements
    - Niraj

  • What would you prefer - SAP ERP or S/4 HANA?

    Hello,
    After the impressive keynote speech of the recent TechEd, it made wonder about how the customers of SAP would leverage the new S/4 HANA, if at all and it instigated a thought process.
    Possibilities:
    A. Keep our good old SAP ERP - Through the years, a company has been employing SAP ERP, with all its configurations done, customizing in place, trained talent pool, interfaces defined and up and running solutions. Migrating to a whole new solution would mean a lot of overhead of replacing all of that as well as increase TCO.
    B. Switch to the amazing S/4 HANA - Simply means leveraging all the benefits S/4 HANA has to offer with lightening speed at comparatively low investment considering the returns. With the ease of development as well as configuration offered, the required workforce might reduce considerably, thus, lowering support costs. This would be like one time investment with long term returns.
    Note: All of the above are my views to the best of my knowledge and everyone is entitled to their opinion, agreements or disagreement to the above. Let us just discuss about what everyone thinks about this, pros and cons about what SAP has to offer and propagate optimum utilization of innovation for years to come.
    So what do you guys think?

    Hi,
                Thanks for sharing,that's good suggestion you give thanks for all of that kind suggestion!!!
    Thanks and regards

  • I keep getting your applie Id has been disabled even after signing out and back in, what do I do?

    I keep getting your applie Id has been disabled even after signing out and back in, what do I do?

    If changing your password does not work, then contact itunes support.

  • Help: Landscape Impacts of ERP EhP4

    I am seeking advice or documents -- we have found conflicting answers on this issue.
    We have:
    - One HR ABAP system running ERP.
    - One Portal Java system executing ESS/MSS Java code, connected to the HR ERP system.
    - One BW ABAP system doing information broadcasting to our Portal.
    Here's my questions:
    - If we upgrade HR's ERP to EhP4, this requires it to upgrade to NetWeaver EhP1.
    - Since HR's ESS/MSS Java code is physically running on our Portal, do we now have to upgrade our Portal to NetWeaver EhP1 to support this?
    - Then, if our Portal upgrades to NetWeaver EhP1, does this force our BW system (using it for information broadcasting) to also upgrade to NetWeaver EhP1?
    Any answers or advice?

    Hi Kristjan,
    you are not forced to update the portal to NetWeaver EHP1 in case you use XSS and update the ECC Server (HR).
    Please read the EHP 4 Master Guide (via http://service.sap.com/instguides).
    Best regards,
    Christian.

  • Upgrade from ERP 6.0 with AFS 6.0 to ERP EHP4 - AFS 6.4

    Dear all,
    I've upgraded our Solution Manager to latest maintenance (all latest release/all latest Sp/all Oss notes)
    I 'm unable to have a queue with EHP4 - Afs 6.4 from Solution Manager
    If I define a system as SAP ERP 6 with Afs, the sol. man. give me the option to upgrade to EHP4 but 'forget' AFS 6.4.
    If I define a system as Afs Server 6, the sol. man doesn't show me the option to upgrade to EHP4.
    Any Idea to exit from this stall condition ?
    If I choose the option SAP ERP 6.0 to upgrade to EHP4, SAPHEPI will ask me the AFS upgrade CD and all AFS Sp ?
    My target is:
    - ERP 6.0 SPS 16 with AFS SP8 + ERP 6 EHP4 SPS 4 with AFS 6.4 SP 2, the max possibile now.
    Thanks tho who will try to help me.
    Regards

    Hi Reena
    Yes, you can upgrade the system to ECC 6 EHP 6 or 7,
    before that is any other SAP system are connected to ECC6 ?
    If it is yes, Kindly refer the SAP Note, & you require to check those SAP version are supported to ECC 6 EHP 7 ?
    1388258 - Version Interoperability within the SAP Business Suite
    BR
    SS

  • ERP EHP4 Installation Problem in Update Database registry Phase.

    Hi,
    We are installing ERP 6.0 EHP4 Ready SR1 on AIX6.1 (6100-03-01-0921)  and DB2 v9.1.0.7.
    During installation in phase Update Database Registry, we are getting below error:
    SQL1042C  An unexpected system error occurred
    If any body has faced this error earlier, then please suggest.
    Thanks
    Sunny

    Hi,
    Please find below the latest entries in db2diag.log:
    2009-12-14-20.15.17.555605-330 I25354A304         LEVEL: Event
    PID     : 630830               TID  : 1           PROC : db2stop2
    INSTANCE: db2ged               NODE : 000
    FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:260
    DATA #1 : String, 43 bytes
    System controller termination is completed.
    2009-12-14-20.15.17.555785-330 I25659A383         LEVEL: Event
    PID     : 630830               TID  : 1           PROC : db2stop2
    INSTANCE: db2ged               NODE : 000
    FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:270
    DATA #1 : String, 26 bytes
    Active EDUs to be waited :
    DATA #2 : Hexdump, 4 bytes
    0x0FFFFFFFFFFFCF70 : 0000 0001                                  ....
    2009-12-14-20.15.17.565945-330 I26043A381         LEVEL: Event
    PID     : 630830               TID  : 1           PROC : db2stop2
    INSTANCE: db2ged               NODE : 000
    FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:280
    DATA #1 : String, 24 bytes
    There is no active EDUs.
    DATA #2 : Hexdump, 4 bytes
    0x0FFFFFFFFFFFCF70 : 0000 0000                                  ....
    2009-12-14-20.15.17.830570-330 E26425A301         LEVEL: Event
    PID     : 630830               TID  : 1           PROC : db2stop2
    INSTANCE: db2ged               NODE : 000
    FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:911
    MESSAGE : ADM7514W  Database manager has stopped.
    STOP    : DB2 DBM
    2009-12-14-20.15.24.936396-330 I26727A1630        LEVEL: Event
    PID     : 545014               TID  : 1           PROC : db2start
    INSTANCE: db2ged               NODE : 000
    FUNCTION: DB2 UDB, base sys utilities, sqleStartStopSingleNode, probe:1130
    DATA #1 : String, 31 bytes
    /db2/db2ged/sqllib/adm/db2star2
    DATA #2 : Hexdump, 256 bytes
    0x0FFFFFFFFFFF9C20 : 2F64 6232 2F64 6232 6765 642F 7371 6C6C    /db2/db2ged/sqll
    0x0FFFFFFFFFFF9C30 : 6962 2F61 646D 2F64 6232 7374 6172 3200    ib/adm/db2star2.
    0x0FFFFFFFFFFF9C40 : 4E4F 4D53 4700 0000 0000 0000 0000 0000    NOMSG...........
    0x0FFFFFFFFFFF9C50 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x0FFFFFFFFFFF9C60 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x0FFFFFFFFFFF9C70 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x0FFFFFFFFFFF9C80 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x0FFFFFFFFFFF9C90 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x0FFFFFFFFFFF9CA0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x0FFFFFFFFFFF9CB0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x0FFFFFFFFFFF9CC0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x0FFFFFFFFFFF9CD0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x0FFFFFFFFFFF9CE0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x0FFFFFFFFFFF9CF0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x0FFFFFFFFFFF9D00 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x0FFFFFFFFFFF9D10 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    2009-12-14-20.15.25.077684-330 E28358A856         LEVEL: Warning
    PID     : 602312               TID  : 1           PROC : db2star2
    INSTANCE: db2ged               NODE : 000
    FUNCTION: DB2 UDB, license manager, sqllcRequestAccess, probe:1
    MESSAGE : ADM12007E  There are "89" day(s) left in the evaluation period for
              the product "DB2 Enterprise Server Edition". For evaluation license
              terms and conditions, refer to the IBM License Acceptance and License
              Information document located in the license directory in the
              installation path of this product. If you have licensed this product,
              ensure the license key is properly registered. You can register the
              license via the License Center or db2licm command line utility. The
              license file can be obtained from your licensed product CD.
    2009-12-14-20.15.25.174108-330 E29215A384         LEVEL: Warning
    PID     : 667782               TID  : 1           PROC : db2wdog 0
    INSTANCE: db2ged               NODE : 000
    FUNCTION: DB2 UDB, routine_infrastructure, sqlerInitFmpTable, probe:30
    DATA #1 : String, 16 bytes
    agentCachingFmp:
    DATA #2 : String, 3 bytes
    OFF
    DATA #3 : String, 5 bytes
    Flag:
    DATA #4 : Boolean, 1 bytes
    false
    2009-12-14-20.15.26.288917-330 E29600A1208        LEVEL: Event
    PID     : 602312               TID  : 1           PROC : db2star2
    INSTANCE: db2ged               NODE : 000
    FUNCTION: DB2 UDB, base sys utilities, DB2StartMain, probe:911
    MESSAGE : ADM7513W  Database manager has started.
    START   : DB2 DBM
    DATA #1 : Build Level, 152 bytes
    Instance "db2ged" uses "64" bits and DB2 code release "SQL09017"
    with level identifier "02080107".
    Informational tokens are "DB2 v9.1.0.7", "s090308", "U823509", Fix Pack "7".
    DATA #2 : System Info, 224 bytes
    System: AIX gpldeve1 1 6 00C1EF854C00
    CPU: total:8 online:4 Threading degree per core:2
    Physical Memory(MB): total:14336 free:10662
    Virtual  Memory(MB): total:35328 free:31640
    Swap     Memory(MB): total:20992 free:20978
    Kernel   Params: msgMaxMessageSize:4194304 msgMaxQueueSize:4194304
                     shmMax:68719476736 shmMin:1 shmIDs:131072
                     shmSegments:68719476736 semIDs:131072 semNumPerID:65535
                     semOps:1024 semMaxVal:32767 semAdjustOnExit:16384
    Cur data size (bytes)  = 0x7FFFFFFFFFFFFFFF
    Cur stack size (bytes)  = 0x7FFFFFFFFFFFFFFF
    Cur core size (bytes)  = 0x0000000077359400
    nofiles (descriptors)  = 0x7FFFFFFFFFFFFFFF
    2009-12-14-20.18.03.426764-330 E30809A597         LEVEL: Warning (OS)
    PID     : 544840               TID  : 1           PROC : db2set
    INSTANCE: db2ged               NODE : 000
    FUNCTION: DB2 UDB, oper system services, sqloqcurdir, probe:100
    MESSAGE : ZRC=0x840F0001=-2079391743=SQLO_ACCD "Access Denied"
              DIA8701C Access denied for resource "", operating system return code
              was "".
    CALLED  : OS, -, unspecified_system_function
    OSERR   : EACCES (13) "Permission denied"
    DATA #1 : File name, 0 bytes
    Object not dumped: Address: 0x0FFFFFFFFFFFE688 Size: 0 Reason: Zero-length data
    2009-12-14-20.18.03.429260-330 I31407A290         LEVEL: Event
    PID     : 544840               TID  : 1           PROC : db2set
    INSTANCE: db2ged               NODE : 000
    FUNCTION: DB2 UDB, oper system services, db2set_main, probe:40
    CHANGE  : CFG DB2SET: DB2_WORKLOAD: From: "SAP" To: "SAP"
    Thanks
    Sunny

Maybe you are looking for