Applying oracle patch set for Oracle 10.2.0.4

Hi All,
I need some clarification on below suggestions from SAP,
<div class="jive-quote">there is also no optimizer mergefix installed in the database. This can lead to big performance problems due to wrong Oracle Cost Based Optimizer decisions. SAP therefore requires the installation of so called SAP Bundle Patches. Please refer to
SAP note #1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.
It is mandatory to install the most current available SBP in SAP environments.</div>
I have Oracle 10.2.0.4 and AIX 6.1 for my all SAP systems, please guide me what exact steps I have to follow, as this note contains information about the relased oracle patch set but doesnt have information about how to apply.
I never applied any oracle patch set before and very new to all this, so your solution will help me a lot in this task.
Regards,
Ramesh.

ramesh_basis wrote:
Hi All,
>
> I need some clarification on below suggestions from SAP,
>
> <div class="jive-quote">there is also no optimizer mergefix installed in the database. This can lead to big performance problems due to wrong Oracle Cost Based Optimizer decisions. SAP therefore requires the installation of so called SAP Bundle Patches. Please refer to
> SAP note #1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.
> It is mandatory to install the most current available SBP in SAP environments.</div>
>
> I have Oracle 10.2.0.4 and AIX 6.1 for my all SAP systems, please guide me what exact steps I have to follow, as this note contains information about the relased oracle patch set but doesnt have information about how to apply.
>
> I never applied any oracle patch set before and very new to all this, so your solution will help me a lot in this task.
>
> Regards,
> Ramesh.
Hi Ramesh,
Firstly, go to "http://service.sap.com/swdc -> Software Downloads -> Database Patches -> Oracle -> Oracle 10.2.0.4 -> OPatch" then download and install OPatch_10205_Generic_v0.zip
Secondly, go to "http://service.sap.com/swdc -> Software Downloads -> Database Patches -> Oracle -> Oracle 10.2.0.4 -> Database RDBMS -> Generic (32-bit / 64-bit)" then download and install "Pre-Upgrade Information Utility utlu102i.sql (zipped)" and "p8350262_10204_Generic.zip"
Thirdly, "http://service.sap.com/swdc -> Software Downloads -> Database Patches -> Oracle -> Oracle 10.2.0.4 -> Database RDBMS -> AIX5L (64-bit)" then download and install "SAP_102048_201106_AIX.zip"
You can find readme fles in the zip files.
Best regards,
Orkun Gedik

Similar Messages

Current Patch Set for Oracle Database Release 11.2

Hi
I am upgrading oracle 10G to 11GR2 in AIX 5.3 Environment with SAP ECC6 , I have just just installled Oracle 11.2.0.1.0 according to the "Database Upgrade Guide -Upgrade to Oracle Database 11g Release 2 (11.2): UNIX". After database software installation , in upgrade manual in section 3.4.4 it says, you need to install current patch set for oracle database 11g R2 and referencing a SAP note 1431799.
I have just read note 1431799 which says Current Patch Set for Oracle Database Release 11.2 is not generally available for SAP customers until December 2010, also I donu2019t find the note 1522330 as mentioned in 1431799.
Please let me know how I can get current patch set to apply with Oracle 11.2.0.1.0 (Is it in SAP service market place?)
I also want to upgrade my installation to oracle 11.2.0.2, please let me know where I get the patch set to upgrade from 11.2.0.1.0 to 11.2.0.2,
or
I have to live with 11.2.0.1.0 and apply SAP Bundle Patch ( SBP)

Abu Al MAmun,
I understand from your posts that you recently upgraded to 11.2.0.2.
I am having the same difficulty, of finding the current patch set for 11.2. Could you please let me know how you worked around it?
Thanks,
Siri
Hello Everyone,
I did read the post on to how you have to install the current patch set for 11.2.
But honestly, it pretty much flew over my head.
I am trying to upgrade our SAP AIX 64 bit test system from Oracle 10.2.0.4 to 11.2.0.2.
And so far I have downloaded all the required sw for the upgrade, except for the current patch set 11.2.
This is what I have right now:
1) Oracle 11.2 AIX 64 bit upgrade sw - 51038805_part 1 to 51038805_part 7 and 51039800.
2) Database Patches -->Oracle 11.2.0.2 -->
All they have here is
a. Database RDMBS - SAP_112020_201012_AIX.zip and b. SAP_112020_201101_AIX.zip
b. OPatch - OPatch_11201_Generic_v3.zip and mopatch-2_1_6.zip
c. Database Vault - DV - >Generic - p9656644_112020_Generic.zip
If I am not wrong, the Database RDBMS files are nothing but the SAP Bundle Patches that have to be installed after installing the currrent patch set 11.2.0.2 using MOPatch.
But I did not find the currrent patch set 11.2.0.2.
Could someone please explain the process to me in detail? This being my first time , I am finding it a bit hard to catch up with some of the stuff.
Thank You!
Siri

Please provide the patch set for Oracle Enterprise Manager Grid Control 10

Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.

user12009184 wrote:
Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.you must obtain all patches directly from
http://support.oracle.com

Install the latest patch set for Oracle 10.2.0.4.0

I install SAP PI 7.1 EHP1 on Windows Server 2008 (RC1).
I already installed Oracle DB software 10.2.0.4.0
Now I would like to install the latest set for Oracle 10.2.0.4.0
I downloaded the following files from Service Marketplace:
- p8559467_10204_MS_WINX8664.zip
-p7592030_10204_WIN_GENERIC.zip
- Opatch_10204_Generic_v5.zip
- and 3 Patchset files (Patchset_10204MSWINX8664aa.bin, Patchset_10204MSWINX8664ab.bin, Patchset_10204MSWINX8664ac.bin )
Question:
1) What is the procedure/order to install the patch set?
2) Where (in which directory) should I put the 3 Patchset files and which commando should be used here (opathc apply)?
Thank you!

> - p8559467_10204_MS_WINX8664.zip
> -p7592030_10204_WIN_GENERIC.zip
> - Opatch_10204_Generic_v5.zip
> - and 3 Patchset files (Patchset_10204MSWINX8664aa.bin, Patchset_10204MSWINX8664ab.bin, Patchset_10204MSWINX8664ac.bin )
That one is for updates 10.2.0.<4 to 10.2.0.4. Since you are already on 10.2.0.4 that one is no more necessary.
> 1) What is the procedure/order to install the patch set?
> 2) Where (in which directory) should I put the 3 Patchset files and which commando should be used here (opathc apply)?
See Note 1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.0.4
Basically you will
- patch Opatch
- unzip the patch to a directory where <sid>adm has access
- stop all Oracle Services
- then execute opatch apply
Markus

Latest patch set for oracle client 8.1.7

hello,
what is the latest patch set exactly for oracle 8.1.7.xx? I know that this version is desupported but I need this client for a third party application that we have in use.
thanks
katharina

Patch 2376472 is the latest patch set for 8.1.7 which will bring you up to 8.1.7.4. It is still available on Metalink.

Patch set for oracle-8.1.5

Hi,
Does anyone know where can i get patches for bug:883333 ==> import error where schema contains synonym.
FYI, I'm currently using Oracle8.1.5 on AIX4.3.3. I'm already report this problem to Metalink but they still not upload the patches.
TQ

rdbms 815 went out of support on dec. 31, 2000.
you need to move to a currently supported version (i.e 816 or 817(recommended)).
once a product goes out of support, patches are no longer created for it ..

How to download oracle patch set 10.2.0.5 for Windows server 2008 R2

I need download and install oracle patch set 10.2.0.5 and install for Windows server 2008 R2 (notes 1486772).
But I get message "Download basket request for update has been processed. Unable to add 1 new object(s). The objects are already part of Export and to be processed."
Help me, please!

Hi,
Have you looked at this location https://service.sap.com/oracle-download ?
Refer SAP Note 871735 - Current patch set for Oracle 10.2.0 -> Oracle patch set 10.2.0.5
Once you add the Patchset 10.2.0.5 in download basket, you will find the same in Export tab of Download Basket. You will have to get the approval from SAP Export department by raising OSS message with XX-SER-SWFL-EXPORT component. After getting approval for the same from SAP Export dept., then & then only you will able to download it.
Regards,
Bhavik G. Shroff

Distinction among terms: Oracle Patch Set, Oracle Patch Bundle, ecc

Hi to all,
a customer asked me to update an Oracle database 10.1.3.0 on Windows 32 platform. THe only patches installed are **5556081** and *5557962*..
I looked for new updated patches and I founded some Oracle Recommended Patches ID 756671.1 and Oracle Patch Bundles ID 1207176.1 for 10.2.3.0.
Honestly I don't know how to proceed in the sense that i don't know if it is better to apply these bundle patches or to go directly to Oracle Patch Set 10.2.4.0 or 10.2.5.0 for a better update.
What is the difference between Oracle Patch Bundle and Oracle Patch Set?? and the difference between Oracle patch Set and Oracle Patch Set Update???
Any help will be well appreciated..I need to do this update asap
Thanks in advance
Susy Paparella OCP 10 G DBA

user8837052 wrote:
Hi to all,
a customer asked me to update an Oracle database 10.1.3.0 on Windows 32 platform. THe only patches installed are **5556081** and *5557962*..
I looked for new updated patches and I founded some Oracle Recommended Patches ID 756671.1 and Oracle Patch Bundles ID 1207176.1 for 10.2.3.0.
Honestly I don't know how to proceed in the sense that i don't know if it is better to apply these bundle patches or to go directly to Oracle Patch Set 10.2.4.0 or 10.2.5.0 for a better update.
What is the difference between Oracle Patch Bundle and Oracle Patch Set?? and the difference between Oracle patch Set and Oracle Patch Set Update???
Any help will be well appreciated..I need to do this update asap
Thanks in advance
Susy Paparella OCP 10 G DBA
Pl clarify what you mean by "10.1.3.0", "10.2.3.0", "10.2.4.0" and "10.2.5.0" - there a no such Oracle versions
I believe you mean 10.1.0.3, 10.2.0.3, 10.2.0.4 and 10.2.0.5
If so, all of the above are patch sets on top of the base release (10.1 or 10.2). It is always recommended to update to the latest patch set release.
Pl note that both 10.1 and 10.2 are de-supported - you should be using the latest 11gR2 version.
Patch set updates (PSU) are additional bundled fixes on top of patch sets - see this MOS Doc
Patch Set Updates for Oracle Products [ID 854428.1]
HTH
Srini

Oracle 9.2.0.3.0 patch set for windows - questions

Hi!
I have for that some questions. I have oracle 9.2.0.1.0 on a windows 2003 server running with one local database - no real apllication cluster.
I don't understand which instructions I have to make for oracle upgrade?
Must I also make the 3. instruction? Connect to databse prior and drop?
Must I also make the post install action for my database?
(startup migrate ...)
what means at post install actions the following:
'execute these post install actions only if you have one or more databases associated to the upgraded $oracle_homee.
My database path is e:\oracle\oradata\database my oracle path is e:\oracle\ora92 have I in my case make the post install actions?
Thanks for help!
1. When applying this patchset on Windows NT, XP or Windows 2000, you must log onto the system as a user with Administrative privileges
(e.g. as a user which is a member of the local Administrators group).
2. Unzip the downloaded patch set file into a new directory.
3. Drop the xmlconcat function by running the following commands:
drop public synonym xmlconcat;
drop function xmlconcat;
4. Shut down any existing Oracle Server instances in the ORACLE_HOME to be patched with normal or immediate priority. i.e.: Shutdown all instances (cleanly). Stop the database services, and stop all listener, agent and other Oracle processes running in or against the ORACLE_HOME to be installed into.
5. Perform the following pre-install steps for Real Application Clusters (RAC) enviroments only:
IN ADDITION TO STOPPING ALL ORACLE SERVICES IN THE ORACLE_HOME TO BE UPGRADED:
If you are running in a RAC enviroment, stop the following Windows service(s)/devices(s) using the Net Stop command:
Stop the Windows service named "OracleGSDService"
Stop the Windows service named "OracleCMService9i".
Stop the Windows device named "OraFenceService" (This Device does NOT show up as a Service in the Control Panel).
For Example:
C:\>net stop OracleGSDService
C:\>net stop OracleCMService9i
C:\>net stop OraFenceService
Once the above steps have been performed on all the nodes of the cluster, you should then be able to upgrade the OSD components to the 9.2.0.3 versions. This can be accomplished by...
xcopy all the files in the \Disk1\preinstall_rac\osd\*.* directory to the directory in which the OSD components were originally installed on all nodes(typically %SystemRoot%\system32\osd9i).
Note: You may also be able to look in HKEY_LOCAL_MACHINE\Software\Oracle\OSD9i registry key to determine the directory in which the original OSD components were installed. Now the OSD components can be restarted on all the nodes in the cluster.
C:\>net start OraFenceService
C:\>net start OracleCMService9i
C:\>net start OracleGSDService
After all of the above steps have been completed on all the nodes of the cluster, you are now ready to proceed with the Oracle 9.2.0.3.0 patchset installation.
6. Start the installer:
If the current Installer version is less than 2.2.0.18.0 then download the Installer 2.2.0.18.0 from Oracle Metalink where it can be accessed with the bug number 2878462 and choosing the MS Windows NT/2000 Server platform, then run the setup.exe 2.2.0.18.0 from the C:\Program Files\Oracle\oui\install directory .
7. You may install the Patch Set through either an interactive or a silent installation.
To perform an interactive installation using the Oracle Universal Installer graphical interface:
1. Start the installer from the newly installed OUI 2.2.0.18.0 by running the version of setup.exe located at C:\Program Files\Oracle\oui\install and verify
that the version of the OUI GUI is 2.2.0.18.0 before proceeding.
2. Follow the steps given below within the installer:
1. On the Welcome screen, click the Next button. This will display the File Locations screen.
2. Click the Browse button for the Source... entry field and navigate to the stage directory where you unpacked
the Patch Set tar file.
3. Select the products.jar file. Click the Next button
The products file will be read and the installer will load the product definitions.
The products to be loaded will be displayed (verify ORACLE_HOME setting for this first).
4. Verify the products listed and then click on the Install button.
5. Once the installation has completed successfully, it will display End of Installation. Click on Exit and confirm
to exit the installer.
To perform a silent installation requiring no user intervention:
1. Copy the response file template provided in the response directory where you unpacked the Patch
Set tar file.
2. Edit the values for all fields labeled as "<Value Required>" according to the comments and examples
in the template.
3. From the unzipped patchset installation area, start the installer by running the setup executable passing
as the last argument the full path of the response file template you have edited locally with your own
value of ORACLE_HOME and FROM_LOCATION:
setup.exe -silent -responseFile <full_path_to_your_response_file>
Post Install Actions
Execute these "Post Install Actions" only if you have one or more databases associated to the upgraded $ORACLE_HOME.
Important Notes
1: Java VM and XML DB Requirements
Users who have JVM (Java enabled) or JVM and XDB installed on their 9.2.0.1 databases should make sure that the init.ora parameters shared_pool_size and java_pool_size are each 150 MB or more before running the catpatch.sql upgrade script. Failure to do so could result in an unrecoverable memory failure during running of the script. Please note that JVM and XML DB was shipped as part of the default 9.2.0.1 seed database and will be present unless the user explicitly installed a 9.2.0.1 instance without them.
2: SYSTEM table space
If you have JServer installed in the database, you should check to be sure there is at least 10M of free space in the SYSTEM table space before running these actions.
3: Installing on Cluster Databases
If you are applying this patch set to a cluster database, then set the CLUSTER_DATABASE initialization parameter to false. After the post-install actions are completed, you must set this initialization parameter back to true.
To complete the installation of this patch set, you need to start up each database associated with the upgraded $ORACLE_HOME, start the database listener (e.g., lsnrctl start), login using SQL*Plus (e.g., sqlplus "/ as sysdba"), and run the following commands/scripts in order from $ORACLE_HOME within a MIGRATE session. If you are using the OLAP option, make sure that the database listener is up.
startup migrate
spool patch.log
@rdbms/admin/catpatch.sql
spool off
Review the patch.log file for errors and re-run the catpatch script after correcting any problems
shutdown
startup
This step is optional - it will recompile all invalid PL/SQL packages now rather than when accessed for the first time - you can also use utlrcmp.sql to parallelize this in multiprocessor machines:
@rdbms/admin/utlrp.sql
Execute the following if you use Oracle OLAP option:
alter user olapsys identified by <password> account unlock
connect olapsys/<password>
@cwmlite/admin/cwm2awmd.sql
exit
Execute the following script only if you have version 9.2.0.1.0 of Oracle Internet Directory installed in your ORACLE_HOME. Make sure that the database and database listener are running and that all parameters are specified prior to running the script:
$ORACLE_HOME/bin/oidpatchca.bat
-connect <Connect String>
-lsnrport <Listener Port>
-systempwd <SYSTEM Password>
-odspwd <ODS Password>
-sudn <Super-User DN>
-supwd <Super-User Password>
-dippwd <Password to register DIP Server>
Where:
connect - Database connect string
lsnrport - Database Listener port
systempwd - Password of the database 'SYSTEM' user
odspwd - Password of the database 'ODS' user
sudn - Super-user DN
supwd - Super-user Password
dippwd - New password to register Directory Integration Server. This password must conform to the password policy in the OID server
Execute the following steps only is you are using the RMAN catalog.:
rman catalog <user/passwd@alias>
upgrade catalog;
upgrade catalog;

I don't understand which instructions I have to make for oracle upgrade?
-- You have to follow all the instructions mentioned
(Just check for few if's for Cluster enabled, OID and OLAP databases. Perform these steps only if they apply)
Must I also make the 3. instruction? Connect to databse prior and drop?
-- Yes you should do
Must I also make the post install action for my database?
(startup migrate ...)
-- Yes. Do run catpatch.sql .
what means at post install actions the following:
'execute these post install actions only if you have one or more databases associated to the upgraded $oracle_homee.
-- In this step make sure you do step 1
1: Java VM and XML DB Requirements
Otherwise catpatch.sql will fail.
Do 2 and 3 only if applicable
Chandar
My database path is e:\oracle\oradata\database my oracle path is e:\oracle\ora92 have I in my case make the post install actions?

Error when installing 9.0.1.4.0 patch set for the Oracle Database Server.

Hi to all.
Currently, i am trying to install patches for portal server.
The server OS is Sun Solaris 8.
We are using Oracle9iAS.
Now, we are installing 9.0.1.4.0 patch set for the Oracle Database Server.
We managed to install the patch, but have problem with the Post Install Action.
We managed to run
-ALTER SYSTEM ENABLE RESTRICTED SESSION;
-@rdbms/admin/catpatch.sql
-ALTER SYSTEM DISABLE RESTRICTED SESSION;
-CONNECT / AS SYSDBA
-update obj$ set status=5 where type#=29 and owner#!=0;
-commit;
But, when we come to the next command, which is to shutdown, it gives us like
this..
SQL> update obj$ set status=5 where type#=29 and owner#!=0;
1402 rows updated.
SQL> commit;
Commit complete.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORA-00604: error occurred at recursive SQL level 1
ORA-01219: database not open: queries allowed on fixed tables/views only
We tried to startup the database..it gives us this error..
SQL> startup
ORA-01081: cannot start already-running ORACLE - shut it down first
So, we tried to shutdown again..
SQL> shutdown immediate
ORA-01089: immediate shutdown in progress - no operations are permitted
I been informed that this is maybe a Database problem related. Any ideas?
Best Wishes,
Rushdan Md Saad.

Patchsets could be obtained (only) from http://metalink.oracle.com
You need to have valid CSI for access.
P.S: Sorry Werner, I didn't see you post.
Message was edited by:
Ivan Kartik

Oracle Patch set 10.2.0.4 for HP-UX PA-RISK

Dear all,
Can anyone please tell me the path to download the Oracle Patch ser 10.2.0.4 for HP-UX PA_RISK?
I need to upgrade our DB level - currently Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
For upgrade to Oracle 11g I need to be on minimum 10.2.0.4. I tried to find the patchset files on :
Software downloads ->Database patches -> Oracle ->Oracle 64-bit ->Oracle 10.2.0. 64-bit Here I can't find 10.2.0.4
On the other path Software downloads ->Database patches -> Oracle ->Oracle 10.2.0.4 -> Database RDBMS ->HP-UX PA-RISC (64-bit) I can't find the patch set only bundle patch 10.2.0.4.6
Please help.
Thanks in advance.
BR,
Ruzica

> First we will do SAP systems merge and when there will be only one DB instance we'll do Oracle upgrade to 11g
And why do you think a merge of application data is dependent on the Oracle patchlevel? I mean those patchlevel are on a technical level, even if you'd use SQL on the lower level it works you don't merge "binaries" but database content, right?
http://service.sap.com/swcenter-3pmain
--> Oracle
--> Oracle 10.2.0.4
--> Database RDBMS
--> HP-UX PA-RISC (64-bit)
There you can download the patchset.
BTW: this is also mentioned in "1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.0.4" )
Markus

Oracle patch set 10.1.0.4 or patch #3895738

I need to apply either Oracle patch set 10.1.0.4 or patch #3895738 (on top of 10.1.0.3) for Sun Solaris as suggested by Metalink Note: 283107.1
I cannot find either one by using Metalink Patches search. Where can I find them?

Hi
There is no 10.1.0.4 till now, it's in planed status.
lajos

Patch 8290549 for oracle 9.2.0.8

Hi,
I need to install April patch 8290549 for oracle 9.2.0.8 but have some doubts if it
is cumulative patch and if it is include Jan patch.
I will appreciate if someone could help with the two questions below.
Is April patch 8290549 for oracle 9.2.0.8 is cumulative patch ?
Is it include January patch 7592365 ?
Thank You,
Ronen

All CPUs released by Oracle are cumulative i.e. they include all the fixes from the first CPU released for a particular release (f.ex. 9.2.0.8) till the current one.
The Readme for the patch itself has following lines
<quote>
Critical patch update (CPU) patches are cumulative, which means fixes from previous Oracle security alerts and critical patch updates are included. It is not required to have previous security patches applied before applying the CPUApr2009 patches. However, you must be on the stated patch set level for a given product home before applying the CPUApr2009 patches for that release.
<quote>
Edited by: Satish Kandi on May 27, 2009 8:54 PM
Added Readme details.

Oracle patch set information

Hi,
We have oracle 10.1 ,10.2 in some systems and we need to update oracle patch set
could anyone help me whether if I want to change oracle 10.1 to 10.2 will come under upgrade or updating patch set?
if yes what is the procedure about how to update patch in Oracle?

Hi,
to go from 10.1 to 10.2 you need to upgrade your database, a patch set will not do it.
Please check the upgrade documentation in the SAP Marketplace:
http://service.sap.com/instguides.
Other thing would be that you want to go from 10.2.0.1 to 10.2.0.2
In this case, you only need to apply the patch set relevant for your Operating system. In this case, follow the note mentioned by Kaushal

Error while installing oracle patch set 10.2.0.4

Hi Gurus,
I am installed oracle 10G successfully but while installing oracle patch set 10.2.0.4. it is given the following error.
OUI.exe has encountered a problem and needs to close.
We are sorry for the convenience.
i am installing ECC6.0 on window xp SP3 platform.
Please give me solution ASAP.
Regards
Hemant Gade
Basis Consultant

Hi,
I have solved this issue my self.
It was purely windows registry error.
thanks for your help.
Regards
Hemant

Applying oracle patch set for Oracle 10.2.0.4

Similar Messages

Maybe you are looking for