Applying OS SP2 to existing Windows Srv 2008 SP1 w/ Exchange 2007 SP3 w/RU 5, before installing RU13

We are in the process of planning the deployment of Windows Server 2008 SP2, latest MS updates, and update rollup 13 for Exchange 2007 SP3.  Looking to migrate to Exchange 2013 & Exchange online in the future
Are there any issues that we need to be aware of before proceeding with the big updates.  Exchange is running fine, but we're not able to fully patch these servers unless SP2 is installed.  Thanks a bunch.
Environment:
running Exchange 2007 SP3 with update rollup 5 for all of our email servers (CCR, HUB/CAS w/WNLB).  The OS installed for all of these are Windows 2008 SP1 (6.0.6001
Service Pack 1 Build 6001), latest MS critical updates are the only recent updates installed.  
We also have Forefront Security for Exchange that I might remove.

Hello,
Do you mean you want to upgrade Windows Server 2008 SP1 to Windows Server 2008 SP2, and then upgrade Exchange 2007 SP3 with rollup 5 to rollup 13? If so, the OS not being upgraded to a new version.
If you want to deploy Exchange 2007 SP3 with rollup13, you must install Windows Server 2008 SP2 on a computer that does not have Exchange installed, and then install Exchange 2007 SP3 with rollup 13, and move your mailboxes to new Exchange Server.
Based on your environment, you need to upgrade a clustered mailbox server, you must build a new failover cluster using Windows Server 2008 SP2 as the operating system for all nodes, and then migrate the data from the old cluster to new cluster. 
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

Similar Messages

  • Restore Exchange 2007 SP3 to Windows 2008 R2 from Windows 2003

    Perhaps I'm being dense, but I had Exchange 2007 SP3 installed on a Windows 2003 Server, and I've used "setup /mode:recoverserver" to restore it to a Windows 2008 R2 server... how do I restore the databases which I backed up with the Windows backup tool
    on 2003?
    I installed KB974674, the restore tool onto the 2008 R2 server but when I try and restore the backup it comes up with "this feature is no longer supported".  Something I'm missing here?

    These things marked as answers are not answers.
    I have now thoroughly tested using setup /mode:recoverserver and it works fine going from Windows 2003 to Windows 2008 R2 with Exchange 2007 SP3, done several installations now without a problem.
    "Setup /m:RecoverServer cannot be used across operating systems. A server that was originally running Windows Server 2003 can be recovered only on Windows Server 2003, and a server that was originally running Windows Server 2008 can
    be recovered only on Windows Server 2008."
    This appears to be wrong, unless someone can tell me why it's right (I haven't tried moving Unified Messaging yet).  I've done it to 2008 R2 several times now and also in the other direction, from 2008 R2 to 2003, I can't find anything that didn't work
    afterward, although I haven't really thoroughly tested OWA yet, I admit (but it does appear to be working).
    I think that documentation is out-of-date as it doesn't mention R2 plus I think it was written before SP3 came out and that paragraph is just wrong.
    Basically how I do it is like this:
    Dismount databases from the 2003 server and copy the storage group folders to a network location or removable media.
    Install the Windows 2008 R2 server using the same machine account that was being used by the 2003 server.  Install the prerequisites needed for Exchange 2007 SP3 installation on 2008 R2 (note in addition to the IIS components and RPC over HTTP this
    also requires the AD tools in RSAT, which I haven't found mentioned in technical documentation).  Install the relevant windows updates.
    Install Exchange 2007 SP3 using setup /mode:recoverserver  Install the update rollup.
    Copy the storage groups into the relevant folders on the new server and mount them.  Migrate any relevant certificates (e.g. for ActiveSync).
    Obviously then check it all over with the diagnostic tools and check it with EXBPA.  The backups are obviously totally different, but really I think you should be using DPM anyway.
    To me that was pretty easy to do, to be honest.  About 1.5 on a scale of one to ten.  Basically install it, recover it, copy over some files and mount them.
    Seriously on a halfway decent server I've done it in under an hour.

  • Issue Installing SP2 for Windows Server 2008 SP1

    Hello, I have a very annoying issue, and I hope someone can help a bro out.
    Server: Windows Server 2008 SP1 64-bit
    Issue: SP2 wont install on Windows Server 2008 SP1
    This is what I am seeing when I check the event viewer:
    1. (Information) Windows Servicing is setting package KB948465(Service Pack) state to Staging(Staging)
    2. (Error) Windows Servicing failed to complete the process of changing update 948465-382_neutral_GDR from package KB948465(Service Pack) into Staging(Staging) state
    I have no idea why this is coming up, nor why the server cant fix the issue, but now I am forced to deal with it. So if anyone has any helpful tips it would be greatly appreciated. 
    What I have done so far:
    I have downloaded the standalone SP2 file from microsoft, and tried to install, still failed. Just sent me to the prereq page, which is pretty useless considering the fact I already have SP1 installed, and nothing new has changed physically or digitally
    in the system.
    Also, although not a huge issue, I also have a security update that is failing, basically with the same issue as the SP. Below is its Error event log.
    (Error) Windows Servicing failed to complete the process of changing update 974318-11_neutral_LDR from package KB974318(Security Update) into Staging(Staging) state
    Im hoping that upon discovering the SP issue, I can resolve the security update issue, as the errors have the same issue(failed to complete staging state).Thank you for your time.
    ~I will provide any further info if needed.

    Thank you for pointing me in the right direction Milos. Yes I ALWAYS google my issues before going on forums for help. And to no avail. However, below is the relevant info(sorry I did not post this the first time;first time dealing with an issue like this,
    so I wasnt for shore what relevant data pertained to this issue):
    I also did not copy and paste the entire log in here(obviously) because its huge, however I will post link to full file if requested/needed, but hopefully I grabbed the entire log for my SP2 update failure issue. All I can grab from this log is that the
    CBS failed. However, I have no clue where to go after that..
    WindowsUpdate.log:
    2015-02-22 19:24:15:093
    940 d10
    AU AU initiated download, updateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}.107, callId = {2AFDE80E-EFBF-40A6-861B-32400AC5493B}
    2015-02-22 19:24:15:093
    940 d10
    AU Setting AU scheduled install time to 2015-02-23 08:00:00
    2015-02-22 19:24:15:106
    940 1538
    DnldMgr *************
    2015-02-22 19:24:15:107
    940 1538
    DnldMgr ** START **  DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
    2015-02-22 19:24:15:107
    940 1538
    DnldMgr *********
    2015-02-22 19:24:15:107
    940 1538
    DnldMgr  * Call ID = {2AFDE80E-EFBF-40A6-861B-32400AC5493B}
    2015-02-22 19:24:15:107
    940 1538
    DnldMgr  * Priority = 1, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
    2015-02-22 19:24:15:107
    940 1538
    DnldMgr  * Updates to download = 1
    2015-02-22 19:24:15:107
    940 1538
    Agent  *   Title = Windows Server 2008 Service Pack 2 for x64-based Systems (KB948465)
    2015-02-22 19:24:15:108
    940 1538
    Agent  *   UpdateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}.107
    2015-02-22 19:24:15:108
    940 1538
    Agent  *     Bundles 2 updates:
    2015-02-22 19:24:15:108
    940 1538
    Agent  *       {A34F6A47-5AB9-44CB-AB3F-9FC64F7B903C}.107
    2015-02-22 19:24:15:108
    940 1538
    Agent  *       {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107
    2015-02-22 19:24:15:108
    940 1538
    DnldMgr ***********  DnldMgr: Regulation Refresh [Svc: {9482F4B4-E343-43B6-B170-9A65BC822C77}]  ***********
    2015-02-22 19:24:15:108
    940 1538
    DnldMgr Contacting regulation server for 2 updates.
    2015-02-22 19:24:15:109
    940 1538
    Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
    2015-02-22 19:24:15:119
    940 1538
    Misc Microsoft signed: Yes
    2015-02-22 19:24:15:123
    940 1538
    Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
    2015-02-22 19:24:15:131
    940 1538
    Misc Microsoft signed: Yes
    2015-02-22 19:24:15:134
    940 1538
    DnldMgr Regulation server path: https://www.update.microsoft.com/v6/UpdateRegulationService/UpdateRegulation.asmx.
    2015-02-22 19:24:15:135
    940 d10
    AU  # Pending download calls = 1
    2015-02-22 19:24:15:135
    940 d10
    AU <<## SUBMITTED ## AU: Download updates
    2015-02-22 19:24:15:644
    940 1538
    DnldMgr  * Regulation call complete. 0x00000000
    2015-02-22 19:24:15:661
    940 1538
    DnldMgr ***********  DnldMgr: New download job [UpdateId = {A34F6A47-5AB9-44CB-AB3F-9FC64F7B903C}.107]  ***********
    2015-02-22 19:24:15:732
    940 1538
    DnldMgr  * All files for update were already downloaded and are valid.
    2015-02-22 19:24:15:732
    940 1538
    DnldMgr ***********  DnldMgr: New download job [UpdateId = {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107]  ***********
    2015-02-22 19:24:15:733
    940 1538
    DnldMgr  * Queueing update for download handler request generation.
    2015-02-22 19:24:15:733
    940 1538
    DnldMgr Generating download request for update {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107
    2015-02-22 19:24:16:095
    940 1538
    Handler Generating request for CBS update 77DBCA97-29DC-42BA-9DB2-03C7B4D262D4 in sandbox C:\Windows\SoftwareDistribution\Download\2c728f96f2387c9d64aed5c97088b631
    2015-02-22 19:24:16:095
    940 1538
    Handler Selected payload type is ptExpress
    2015-02-22 19:24:16:124
    940 1538
    Handler UH: DpxRestoreJob returned 0x80070002
    2015-02-22 19:24:16:124
    940 1538
    Handler Detected download state is dsHavePackage
    2015-02-22 19:25:32:077
    940 dcc
    AU AU received policy change subscription event
    2015-02-22 19:26:21:898
    940 d40
    Handler FATAL: CBS called Error with 0x80070002, 
    2015-02-22 19:26:21:899
    940 1538
    Handler FATAL: UH: 0x80070002: Async stage operation failed in CUHCbsHandler::StageCbsPackage
    2015-02-22 19:26:21:909
    940 1538
    Handler FATAL: Request generation for CBS update complete with hr=0x80070002 and pfResetSandbox=0 
    2015-02-22 19:26:21:909
    940 1538
    Handler FATAL: Error source is 106.
    2015-02-22 19:26:21:909
    940 1538
    DnldMgr FATAL: DM:CAgentDownloadManager::GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x80070002.
    2015-02-22 19:26:21:909
    940 1538
    DnldMgr Error 0x80070002 occurred while downloading update; notifying dependent calls.
    2015-02-22 19:26:35:006
    940 1538
    Agent *********
    2015-02-22 19:26:35:006
    940 d10
    AU >>##  RESUMED  ## AU: Download update [UpdateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}]
    2015-02-22 19:26:35:007
    940 1538
    Agent **  END  **  Agent: Downloading updates [CallerId = AutomaticUpdates]
    2015-02-22 19:26:35:007
    940 d10
    AU  # WARNING: Download failed, error = 0x80070002
    2015-02-22 19:26:35:007
    940 1538
    Agent *************
    2015-02-22 19:26:35:007
    940 d10
    AU #########
    2015-02-22 19:26:35:007
    940 1538
    Report REPORT EVENT: {3C6B2054-CE6F-4A29-9E94-D44AB5C4963F}
    2015-02-22 19:24:15:004-0500 1
    147 101
    {00000000-0000-0000-0000-000000000000}
    0 0 AutomaticUpdates
    Success Software Synchronization
    Windows Update Client successfully detected 2 updates.
    2015-02-22 19:26:35:008
    940 d10
    AU ##  END  ##  AU: Download updates
    2015-02-22 19:26:35:008
    940 d10
    AU #############
    2015-02-22 19:26:35:008
    940 d10
    AU Setting AU scheduled install time to 2015-02-23 08:00:00
    2015-02-22 19:26:35:008
    940 1538
    Report CWERReporter finishing event handling. (00000000)
    2015-02-22 19:26:35:009
    940 1538
    Report REPORT EVENT: {85DD7E1D-0632-44FF-81F3-34E75B954869}
    2015-02-22 19:26:22:129-0500 1
    161 106
    {D0ABB478-FFD1-448A-9058-939C0B427AD4}
    107 80070002
    AutomaticUpdates Failure
    Content Download Error: Download failed.
    2015-02-22 19:26:35:181
    940 1538
    Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
    2015-02-22 19:26:35:181
    940 1538
    Report WER Report sent: 7.4.7600.226 0x80070002 D0ABB478-FFD1-448A-9058-939C0B427AD4 Download 106 Unmanaged
    2015-02-22 19:26:35:182
    940 1538
    Report CWERReporter finishing event handling. (00000000)
    2015-02-22 19:26:40:009
    940 1538
    Report REPORT EVENT: {E88B7854-8974-46BE-B243-143ED103C6FF}
    2015-02-22 19:26:35:009-0500 1
    188 102
    {00000000-0000-0000-0000-000000000000}
    0 0 AutomaticUpdates
    Success Content Install
    Installation Ready: The following updates are downloaded and ready for installation. This computer is currently scheduled to install these updates on ‎Monday, ‎February ‎23, ‎2015 at 3:00 AM:  - Security Update for Windows Server 2008 x64 Edition
    (KB2507618)
    2015-02-22 19:26:40:009
    940 1538
    Report CWERReporter finishing event handling. (00000000)

  • Oracle Database 10g(10.2.0.1.0) for Windows server 2008 SP1

    Hi,
    I would like to install Oracle database 10g on Windows server 2008 SP1. What is the supported version ?
    As I go through certification matrix on Oracle support, 10.2.0.5.0 is supported on Windows Server 2008, however I can I install it directly.
    Any help in this regard is highly appreciated.
    Thanks

    TheExplorer wrote:
    Thanks srini for your reply.
    Currently, we are running a lower version of database i.e 10.2.0.1.0 on windows server 2003. I need to migrate theses servers into virtual environment running Windows server 2008 64 bit.
    The document you referred applies to MS Windows 32 bit. However, I see that Oracle Database and Oracle Database Client 10g Release 2 (10.2.0.5) for Windows x64 are supported on Windows Server 2008 R2 x64.http://docs.oracle.com/cd/B19306_01/relnotes.102/b15680/toc.htm#CHDFHIEA
    From where, can we download the older versions of Oracle database as it is not available on OTN (The version of Oracle Database you are looking for is no longer available on OTN. Please visit any of the following links for current release information).
    Looking ahead for the right direction
    Thanks
    You have to open a service request at My Oracle Support.

  • Upgrade from Windows Server 2008 SP1 STD to Windows Server 2012 STD

    Hi,
    tried to upgrade Windows Server 2008 SP1 STD(OEM) to Windows Server 2012 STD but received message in Compatability Report
    SAYING:
    "Upgrades to this build have been disabled"
    Both OS are English and X64.
    Cant get arround this... any idea´what the problem is?

    Hi
    Try upgrading to SP2 and then you can do the upgrade, supported list below:
    http://blogs.technet.com/b/askcore/archive/2012/10/23/upgrading-to-windows-server-2012-part-1.aspx
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Upgrade to Exchange 2007 SP3 from SP2

    Need Advice for Upgrade Exchange Server 2007 SP2 to SP3. My Existing environment is 4 AD. All are run in windows server 2003 and 3 Exchange Server 2007 that are run OS 2003 64 bit one SP1 and another two is SP2. and My next plan is Migration Exchange 2007
    to 2013 and AD 2003 to 2012 R2. Please explain me any body for this matter as per as soon.
    Md. Ramin Hossain

    Hi Md,
    Thank you for your question.
    In addition, when Exchange 2007 and Exchange 2013 are co-existed in organization, and we want to create an EdgeSync Subscription between an Exchange 2007 Hub Transport server and an Exchange 2013 SP1 Edge Transport server, you need to install Exchange 2007
    SP3 Update Rollup 13 or later on the Exchange 2007 Hub Transport server.
    Exchange 2013 is Exchange 2013 Cumulative Update 2 (CU2) or later on all Exchange 2013 servers in the organization.
    We could refer to the following link:
    https://technet.microsoft.com/en-us/library/jj898581(v=exchg.150).aspx
    We could refer to the following steps to migrate Exchange 2007 to Exchange 2013:
    http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
    We could ask to our Window Forum for Window 2003 migration.
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Jim Xu
    TechNet Community Support

  • Can't install KB2553549 on Windows Server 2008 SP1

    Hi all,
    Firsth, sorry for my english. It may be weak :P
    I have a problem when try to install update KB2553549:
    (All the TCP/IP ports that are in a TIME_WAIT status are not closed after 497 days from system startup in Windows Vista, in Windows 7, in Windows Server 2008
    and in Windows Server 2008 R2)
    on Windows Server 2008 Standard 6.0.6002 SP2 Build 6002
    There  (http://support.microsoft.com/kb/2553549/en) is information about compatible systems and my one is included.
    Does anyone know how can I solve this problem ? 

    Is this what you talking about ?
    2014-03-19 16:26:26, Info                  CBS    Session: 30360430:1921600355 initialized.
    2014-03-19 16:26:26, Info                  CBS    Appl: detect Parent, Package: Package_for_KB2553549~31bf3856ad364e35~amd64~~6.1.3.0, Parent: Microsoft-Windows-WinPE-Package~31bf3856ad364e35~amd64~~6.1.7601.17514,
    Disposition = 1003, VersionComp: 1, ServiceComp: 1, BuildComp: 1, DistributionComp: 1, RevisionComp: 1, Exist: 1
    2014-03-19 16:26:26, Info                  CBS    Appl: detectParent (exact match): package: Package_for_KB2553549~31bf3856ad364e35~amd64~~6.1.3.0, Parent: Microsoft-Windows-WinPE-Package~31bf3856ad364e35~amd64~~6.1.7601.17514,
    parent state: 0
    2014-03-19 16:26:26, Info                  CBS    Appl: detect Parent, Package: Package_for_KB2553549~31bf3856ad364e35~amd64~~6.1.3.0, Parent: Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514,
    Disposition = 1003, VersionComp: 1, ServiceComp: 1, BuildComp: 1, DistributionComp: 1, RevisionComp: 1, Exist: 1
    2014-03-19 16:26:26, Info                  CBS    Appl: detectParent (exact match): package: Package_for_KB2553549~31bf3856ad364e35~amd64~~6.1.3.0, Parent: Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514,
    parent state: 0
    2014-03-19 16:26:26, Info                  CBS    Appl: detect Parent, Package: Package_for_KB2553549~31bf3856ad364e35~amd64~~6.1.3.0, Parent: Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385,
    Disposition = 1003, VersionComp: 1, ServiceComp: 1, BuildComp: 1, DistributionComp: 1, RevisionComp: 1, Exist: 1
    2014-03-19 16:26:26, Info                  CBS    Appl: detectParent (exact match): package: Package_for_KB2553549~31bf3856ad364e35~amd64~~6.1.3.0, Parent: Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385,
    parent state: 0
    2014-03-19 16:26:26, Info                  CBS    Appl: detect Parent, Package: Package_for_KB2553549~31bf3856ad364e35~amd64~~6.1.3.0, Parent: Microsoft-Windows-ServerCore-Package~31bf3856ad364e35~amd64~~6.1.7601.17514,
    Disposition = 1003, VersionComp: 1, ServiceComp: 1, BuildComp: 1, DistributionComp: 1, RevisionComp: 1, Exist: 1
    2014-03-19 16:26:26, Info                  CBS    Appl: detectParent (exact match): package: Package_for_KB2553549~31bf3856ad364e35~amd64~~6.1.3.0, Parent: Microsoft-Windows-ServerCore-Package~31bf3856ad364e35~amd64~~6.1.7601.17514,
    parent state: 0
    2014-03-19 16:26:26, Info                  CBS    Appl: detect Parent, Package: Package_for_KB2553549~31bf3856ad364e35~amd64~~6.1.3.0, Parent: Microsoft-Windows-ServerCore-Package~31bf3856ad364e35~amd64~~6.1.7600.16385,
    Disposition = 1003, VersionComp: 1, ServiceComp: 1, BuildComp: 1, DistributionComp: 1, RevisionComp: 1, Exist: 1
    2014-03-19 16:26:26, Info                  CBS    Appl: detectParent (exact match): package: Package_for_KB2553549~31bf3856ad364e35~amd64~~6.1.3.0, Parent: Microsoft-Windows-ServerCore-Package~31bf3856ad364e35~amd64~~6.1.7600.16385,
    parent state: 0
    2014-03-19 16:26:26, Info                  CBS    Appl: detect Parent, Package: Package_for_KB2553549~31bf3856ad364e35~amd64~~6.1.3.0, Parent: Microsoft-Windows-EmbeddedCore-Package~31bf3856ad364e35~amd64~~6.1.7601.17514,
    Disposition = 1003, VersionComp: 1, ServiceComp: 1, BuildComp: 1, DistributionComp: 1, RevisionComp: 1, Exist: 1
    2014-03-19 16:26:26, Info                  CBS    Appl: detectParent (exact match): package: Package_for_KB2553549~31bf3856ad364e35~amd64~~6.1.3.0, Parent: Microsoft-Windows-EmbeddedCore-Package~31bf3856ad364e35~amd64~~6.1.7601.17514,
    parent state: 0
    2014-03-19 16:26:26, Info                  CBS    Appl: detect Parent, Package: Package_for_KB2553549~31bf3856ad364e35~amd64~~6.1.3.0, Parent: Microsoft-Windows-EmbeddedCore-Package~31bf3856ad364e35~amd64~~6.1.7600.16385,
    Disposition = 1003, VersionComp: 1, ServiceComp: 1, BuildComp: 1, DistributionComp: 1, RevisionComp: 1, Exist: 1
    2014-03-19 16:26:26, Info                  CBS    Appl: detectParent (exact match): package: Package_for_KB2553549~31bf3856ad364e35~amd64~~6.1.3.0, Parent: Microsoft-Windows-EmbeddedCore-Package~31bf3856ad364e35~amd64~~6.1.7600.16385,
    parent state: 0
    2014-03-19 16:26:26, Info                  CBS    Appl: detect Parent, Package: Package_for_KB2553549~31bf3856ad364e35~amd64~~6.1.3.0, Parent: Microsoft-Windows-WinPE-Package~31bf3856ad364e35~amd64~~6.1.7600.16385,
    Disposition = 1003, VersionComp: 1, ServiceComp: 1, BuildComp: 1, DistributionComp: 1, RevisionComp: 1, Exist: 1
    2014-03-19 16:26:26, Info                  CBS    Appl: detectParent (exact match): package: Package_for_KB2553549~31bf3856ad364e35~amd64~~6.1.3.0, Parent: Microsoft-Windows-WinPE-Package~31bf3856ad364e35~amd64~~6.1.7600.16385,
    parent state: 0
    2014-03-19 16:26:26, Info                  CBS    Appl: detect Parent, Package: Package_for_KB2553549~31bf3856ad364e35~amd64~~6.1.3.0, disposition state from detectParent: 0
    2014-03-19 16:26:26, Info                  CBS    Appl: Evaluating package applicability for package Package_for_KB2553549~31bf3856ad364e35~amd64~~6.1.3.0, applicable state: 0
    2014-03-19 16:26:26, Info                  CBS    Session: 30360430:1921600355 finalized.  Reboot required: yes

  • Windows Server 2008 SBS and Office 2007

    Hello, the problem I am having is having Safe Senders and Safe Recipients imported into Outlook 2007 SP2 from group policy. It simply won't append the list. The environment is the following:
    Clients: Windows XP Professional with SP3 installed. MS Office 2007 with SP2 installed. 
    Server: Windows 2008 SBS with SP2 installed.
    What I have setup and tried:
    1. Installed the ADMX files correctly on the server and created a GPO with the Outlook settings I need:
      - Specify path to Safe Senders and Recipients files. Location: \\SERVER\netlogon\SafeSenders.txt
    2. Attached the GPO to the correct OU (users are in the OU).
    3. Installed the client side extensions from this link: http://www.microsoft.com/en-us/download/details.aspx?id=3628 on the Windows XP machines.
    Even after setting this up the lists still will not import into Outlook 2007. What I have tried and other notes:
    - Clients have access to the \\SERVER\netlogon share area. Verified through Windows Explorer.
    - Tried forcing group policy update using gpupdate /force No results.
    - Tried logoff and reboot combinations on client machines and still no results.
    - gpresult returns the GPO is applied (but clearly it's not working).
    New to setting this up to Windows XP clients, works on Windows 7 clients flawlessly. Ideas? Solutions? Thanks.
    Rob Holmes

    Hi Rob Holms,
    Based on Donpick's suggestion, if the issue still exists, you can try to enable GPSV debug logging on one client with the problematic clent. This log records the detailed information about the group policy applying process which is very useful for troubleshooting
    the group policy related issues. To enable this debug logging, please perform the following steps:
    1). In the Regedit Editor, expand HKLM\Software\Microsoft\Window NT\CurrentVersion.
    2). Under the folder, create a new key called “Diagnostics”.
    3). Under the key, create a DWORD value “GPSvcDebugLevel” and set the value as
    0x30002. 
    After making this change, run  gpupdate /force to reproduce the issue. After that, check %SystemRoot%\Debug\UserMode\ folder and analyze the log to get more help.
    Regards,
    Lany Zhang

  • Can I install Windows Server 2008 R2 using Bootcamp? I do not want to install native, but may consider if that is the only way....

    I already have Win 7 on an internal Bootcamp drive. It so far has worked well, Bootcamp performance drag is minimal, if at all. Now I want to install Win Server 2008 R2 and load a bunch of virtuals using Hyper-V Manager. The virtuals are already created. This is to practice for a certification test....
    Running Mountain Lion, 2010 MP 2 X 2.4 (8 core) 24 GB RAM, all HDD slots full.

    Works like a charm. Apple Supports says you can have multiple instances of Bootcamp. Win Server 2008 R2 is up and running, drivers installed (except issues with Bluetooth) and accepting Windows Updates and Service Packs.

  • Windows Server 2008 SP1 Error :- Cert_E_expired (0x800b0101)

    Hi
    I am unable to install sp1 on my organization server 2008 R2 could you help me out.
    Below is CBS log
    013-06-29 01:13:56, Info                  CBS    SPI: Root directory being used: C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\
    2013-06-29 01:13:56, Info                  CBS    SPI: Self trust verification failed for C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\spc.xml. 
    0x57
    2013-06-29 01:13:56, Info                  CBS    SPI: Succeeded verifying trust on C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\spc.cat
    2013-06-29 01:13:56, Info                  CBS    SPI: Succeeded verifying trust on C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\spc.xml
    2013-06-29 01:13:56, Info                  CBS    SPI: Self trust verification failed for C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\SPWizUI.dll. 
    0x57
    2013-06-29 01:13:56, Info                  CBS    SPI: Succeeded verifying trust on C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\spc.cat
    2013-06-29 01:13:56, Info                  CBS    SPI: Succeeded verifying trust on C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\SPWizUI.dll
    2013-06-29 01:13:56, Info                  CBS    SPI: Self trust verification failed for C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\SpError.dll. 
    0x57
    2013-06-29 01:13:56, Info                  CBS    SPI: Succeeded verifying trust on C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\spc.cat
    2013-06-29 01:13:56, Info                  CBS    SPI: Succeeded verifying trust on C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\SpError.dll
    2013-06-29 01:13:56, Info                  CBS    SPI: Self trust verification failed for C:\Windows\System32\SpError.dll.  0x57
    2013-06-29 01:13:56, Info                  CBS    SPI: SPC CAT verification failed for C:\Windows\System32\SpError.dll.  0x800b0100
    2013-06-29 01:13:57, Info                  CBS    SPI: Succeeded verifying trust on C:\Windows\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\nt5.cat
    2013-06-29 01:13:57, Info                  CBS    SPI: Succeeded verifying trust on C:\Windows\System32\SpError.dll
    2013-06-29 01:13:57, Info                  CBS    SPI: Loading SPError.dll contained at C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\SpError.dll
    2013-06-29 01:13:57, Info                  CBS    SPI: Self trust verification failed for C:\Windows\System32\spinstall.exe.  0x57
    2013-06-29 01:13:57, Info                  CBS    SPI: SPC CAT verification failed for C:\Windows\System32\spinstall.exe.  0x800b0100
    2013-06-29 01:13:57, Info                  CBS    SPI: Succeeded verifying trust on C:\Windows\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\ntexe.cat
    2013-06-29 01:13:57, Info                  CBS    SPI: Succeeded verifying trust on C:\Windows\System32\spinstall.exe
    2013-06-29 01:13:57, Info                  CBS    SPI: Self trust verification failed for C:\Windows\System32\SPC_SP1_Wave1.xml.  0x57
    2013-06-29 01:13:57, Error                 CBS    SPI: (SPCVerifyTrust:1664)Failed to CryptCATAdminCalcHashFromFileHandle GLE=0x57
    2013-06-29 01:13:57, Info                  CBS    SPI: Installed SPInstall or XML not trusted.  Continuing with current version.
    2013-06-29 01:13:57, Info                  CBS    SPI: Self trust verification failed for C:\Windows\System32\EventProviders\spcmsg.dll.  0x57
    2013-06-29 01:13:57, Info                  CBS    SPI: Succeeded verifying trust on C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287\spc.cat
    2013-06-29 01:13:57, Info                  CBS    SPI: Succeeded verifying trust on C:\Windows\System32\EventProviders\spcmsg.dll
    2013-06-29 01:13:57, Info                  CBS    SPI: No need to update spcmsg.dll event provider
    2013-06-29 01:13:57, Info                  CBS    SPI: Reporting Started event
    2013-06-29 01:13:57, Info                  CBS    SPI: SQM is not opted in
    2013-06-29 01:13:57, Error                 CBS    SPI: (SPIRegQueryDWORDValue:413)Failed to query registry value: UploadDisableFlag er=0x2
    2013-06-29 01:14:00, Info                  CBS    SPI: Starting SP Compatibility\Applicability scan
    2013-06-29 01:14:00, Error                 CBS    SPI: (SPIRegQueryDWORDValue:400)Failed to open the registry root: n/a, key: SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\ServicePack\SP1.
    er=0x2
    2013-06-29 01:14:00, Error                 CBS    SPI: (SPIRegQueryDWORDValue:400)Failed to open the registry root: n/a, key: SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\ServicePack\SP1.
    er=0x2
    2013-06-29 01:14:00, Error                 CBS    SPI: (SPIRegQueryDWORDValue:400)Failed to open the registry root: n/a, key: SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\ServicePack\SP1.
    er=0x2
    2013-06-29 01:14:00, Error                 CBS    SPI: (SPIRegQueryDWORDValue:400)Failed to open the registry root: n/a, key: SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\ServicePack\SP1.
    er=0x2
    2013-06-29 01:14:01, Info                  CBS    Session: 30307383_3597668274 initialized by client SP Coordinater Engine.
    2013-06-29 01:14:13, Info                  CBS    WinVerifyTrust failed [HRESULT = 0x800b0101 - CERT_E_EXPIRED]
    2013-06-29 01:14:13, Error                 CBS    Failed to verify if catalog file \\?\C:\Windows\Servicing\Packages\Package_149_for_KB2732052~31bf3856ad364e35~amd64~~6.1.1.2.cat
    is valid. [HRESULT = 0x800b0101 - CERT_E_EXPIRED]
    2013-06-29 01:14:13, Info                  CBS    Failed to initialize internal package [HRESULT = 0x800b0101 - CERT_E_EXPIRED]
    2013-06-29 01:14:13, Info                  CBS    Failed to create package. [HRESULT = 0x800b0101 - CERT_E_EXPIRED]
    2013-06-29 01:14:13, Error                 CBS    Failed to internally open package. [HRESULT = 0x800b0101 - CERT_E_EXPIRED]
    2013-06-29 01:14:13, Error                 CBS    SPI: (CSPICbsClient::EnumPackages:156)Failed to open package hr=0x800b0101
    2013-06-29 01:14:13, Error                 CBS    SPI: (CSystem::EnumerateCbsPackages:360)Failed to populate CBS package list hr=0x800b0101
    2013-06-29 01:14:13, Info                  CBS    Session: 30307383_3597668274 finalized. Reboot required: no [HRESULT = 0x00000000 - S_OK]
    2013-06-29 01:14:13, Info                  CBS    SPI: Failed enumerating CBS packages
    2013-06-29 01:14:13, Error                 CBS    SPI: (GetLatestVersionFromCBSStore:131)ATL exception hr=0x800b0101
    2013-06-29 01:14:13, Error                 CBS    SPI: (CSPCInstallTask::ApplicabilityScan:632)Failed to get latest version of Package_for_KB976902~31bf3856ad364e35~amd64~~6.1.1.17514
    from the store hr=0x800b0101
    2013-06-29 01:14:13, Error                 CBS    SPI: (CSPInstall::CompatibilityApplicabilityScan:1303)Failed in applicability check of task hr=0x800b0101
    2013-06-29 01:14:13, Info                  CBS    SPI: Ending Compatibility\Applicability scan
    2013-06-29 01:14:14, Error                 CBS    SPI: (PerformSPInstallation:833)Failed to install SP using UI hr=0x800b0101
    2013-06-29 01:14:14, Error                 CBS    SPI: (wmain:1105)Failed to perform SP installation hr=0x800b0101
    2013-06-29 01:14:14, Info                  CBS    SPI: Reporting Failed event
    2013-06-29 01:14:35, Info                  CBS    Session: 30307383_3945058149 initialized by client RMT.
    2013-06-29 01:14:35, Info                  CBS    Session: 30307383_3945058149 finalized. Reboot required: no [HRESULT = 0x00000000 - S_OK]
    2013-06-29 01:15:32, Info                  CBS    SPI: SPInstall terminating, return code 0x800b0101
    2013-06-29 01:15:32, Error                 CBS    SPI: (SPIRegQueryStringValue:700)Failed to query registry value: MiscString2 er=0x2
    2013-06-29 01:15:32, Error                 CBS    SPI: (CSystem::GetMachineName:395)Failed to query machine name from RAC hr=0x80070002
    2013-06-29 01:15:34, Info                  CBS    SPI: Deleting directory: C:\6513907c3269dd8dddbb4a5fbe92\dc54876ebfd88b043cbef17287.  ret=2
    2013-06-29 01:16:44, Info                  CBS    Session: 30307384_940682078 initialized by client RMT.
    2013-06-29 01:16:44, Info                  CBS    Session: 30307384_940682078 finalized. Reboot required: no [HRESULT = 0x00000000 - S_OK]
    2013-06-29 01:18:53, Info                  CBS    Session: 30307384_2232445103 initialized by client RMT.
    2013-06-29 01:18:53, Info                  CBS    Session: 30307384_2232445103 finalized. Reboot required: no [HRESULT = 0x00000000 - S_OK]

    Please run the system update readiness tool.
    http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
    Then post the contents of;
    %SYSTEMROOT%\Logs\CBS\CheckSUR.log
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Windows Server 2008 - Group policy for domain client to start/stop services installed on it

    Hello Experts
    I am a newbie to windows server administration , though did a Google  , but ended up with these question with my requirements
    I have created a new domain and 2 client/computer (A & B namely) to domain . Now A & B has tomcat server running with port 8080 , 9090 which i have installed
    domain ADMIN account .
    && now i am want to start/stop/restart services enabled for domain users  !! How do i achieve this !!
    basic question : How can i access A & B tomcat services on DOMAIN CONTROLLER server to create a GPO and that are on (A & B)
    what is the easiest way to achieve the same , (if not using GPO)???
    similarly I am looking for many features : where I want to control the permission to user on (A & B ) like : If the binaries of tomcat is available on machine say : A , if the user can install (now
    it ask for ADMIN credentials) 
    Thanks
    Mike~Ed

    Controlling services with Group Policy is done under Computer Configuration\Policies\Windows Settings\Security Settings\System Services.
    The limitation is that system services can only see the services the computer running the Group Policy management console. To access other services, you will either need to create the services on your computer (install the software the adds the service)
    or install the remote server administration toolkit (RSAT) on the computer with the service already on it.
    If my answer helped you, check out my blog:
    Deploy Happiness

  • BOEXIR3.1 on Windows Server 2008 SP1

    Hi,
    I am having problems to install BOER3.1 on Win2008 SP1 (64 bits), when I try I get some errors about it's not possible to register dll's and also, I want to install on a different path that program files(x86) but i can't.
    Any body knows if there is a problem with win 2008 with service pack 1?
    Thanks in advance.

    Hi,
    I appreciate your soon answer. I could already install BOE, I had some software called Microsoft c++ recoverable installed (I dont know why, my server was recently formated), when I started to install immediatly i got a message about vcredist.msi so I cancelled it and later all errors about dll's were displayed. I realised something related in the message vcredist.msi with microsoft c++ recoverable so I decided to uninstall it. After that, I didnt get vcredist.msi message anymore and I got to install BOE R3 succesfull.
    Thank you so much.
    Edited by: Sandra J. Duenas F. on Jan 14, 2009 2:04 AM

  • Exchange 2003 sp2 to exchange 2007 sp1 upgrade error

    Hi,
    We had Windows 2003 DCs and Exchange 2003 servers. We migrated AD DCs to windows 2008 R2 at parent domain.
    We have one parent domain and 10 child domains in remote sites .3 remote sites have been migrated to windows 2008 R2.
    Now at parent domain I am trying to install exchange 2007 SP1 on a server with windows 2008 R2 SP1. I am facing certain issues:
    1. When I run setup /PrepareSchema on this new exchange server , the organization check fails with error stating that : cannot find at least one DC running windows 2003 SP1 or later in DC=xyx,DC=com. This could be the result of moving DC objects in AD. Check
    that at least one DC running windows server 2003 SP1 or later is located in the "Domian Controllers" OU and rerun setup".
    2. When I try to install exchange server 2007 , I get the following error
    Object cannot be saved because its ExchangeVersion property is 0.10 (14.0.100.0), which is not supported
    by the current version 0.1 (8.0.535.0). You will need a later version of Exchange.".
    Can any one shed light on this issue.
    Regards
    Syed
    sa

    You cannot install Exchange 2007 SP1 on Windows 2008 R2 SP1 as it is unsupported.
    Only version of Exchange 2007 supported when OS is Windows 2008 R2 or R2 SP1 is Exchange 2007 SP3.
    Where are you installing Exchange ? child or parent domain ?
    2. When I try to install exchange server 2007 , I get the following error "Object
    cannot be saved because its ExchangeVersion property is 0.10 (14.0.100.0), which is not supported by the current version 0.1 (8.0.535.0). You will need a later version of Exchange.".
    Above error indicates that Exchange setup is trying to modify
    a version of an object which might have been created when organization is prepared for Exchange 2010. don't you have exchange 2010 Servers already in your environment ?
    Please give more information about your current email infrastructure
    and whether if you are installing exchange on parent or child domain?
    Pavan Maganti ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful&quot; if it really helps and &quot;Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your
    question. ~~ This Information is provided is &quot;AS IS&quot; and confers NO Rights!!

  • Problem with Terminal Service Performance Counters in WMI on Windows Server 2008 SP2

    I'm always getting Errors in the WMI Subsystem. The two classes Win32_PerfFormattedData_TermService_TerminalServices and Win32_PerfRawData_TermService_TerminalServices are not found by WMI.
    According to KB2512451 classes Win32_PerfRawData_TermService_TerminalServices  and Win32_PerfFormattedData_TermService_TerminalServices have been renamed in Windows Server 2008 SP1.
    Unfortunately in the WMI system they are still referenced, which produces Errors as you can see in the following log file.
    Excerpt from the WMIDIAG 2.1 log file:
    26757 15:36:08 (0) ** WMI MONIKER CONNECTIONS: ............................................................................................ OK.
    26758 15:36:08 (0) ** WMI CONNECTIONS: .................................................................................................... OK.
    26759 15:36:08 (1) !! ERROR: WMI GET operation errors reported: ........................................................................... 2 ERROR(S)!
    26760 15:36:08 (0) ** - Root/CIMV2, Win32_PerfFormattedData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    26761 15:36:08 (0) **   MOF Registration: ''
    26762 15:36:08 (0) ** - Root/CIMV2, Win32_PerfRawData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    I'v tried to delete the two classes using wbemtest.exe started as Administrator but I get an error 0x80041024: Provider not capable of the attempted Operation.
    How can I get rid of these two errors in the WMI system?
    Markus

    Hi Markus,
    Did you refer to following KB and check if that HotFix will help you.
    The WMI repository is corrupted on a computer that is running Windows Server 2008 or Windows Vista
    Meanwhile, please check system log file if find some clues.
    By the way, did you install all necessary updates on the server 2008?
    If any update, please feel free to let me know.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Exchange 2013 SP1 on Windows Server 2008 R2 Enterprise - BSOD after DAG creation

    Hi,
    We are running Exchange 2007 SP3 RU13 on Windows 2003 R2 with SP2 in a 2003 native AD environment and recently decided to upgrade to Exchange 2013. We installed a pair of new DELL R420 servers running Windows 2008 R2 Enterprise then threw Exchange 2013 SP1
    onto them. This all went fine and the servers are running stable.
    We connected the second NIC of each server to the other via a separate switch, the second NIC has Client for MS Networks and File/Printer Sharing disabled plus a totally separate subnet with no DNS or GW address assigned. DAG setup was run and completed
    OK. I created the DAG network in Exchange and enabled replication, I also left replication enabled across the production LAN. Finally, I went into the advanced network settings and made sure the replication network was below the production network in the binding
    order.
    After an hour or two the BSOD's started.. both servers would crash within a few minutes of each other and reboot with a Kernel Panic. I have attached the contents of the dump file below. This seems to happen every few hours and it always seems to be the
    server hosting the passive DB copies crashes first, followed by the server hosting the active copies. Note that if we disable the replication NIC on both servers they do not crash.
    I got the impression from somewhere that perhaps the servers had mixed up the binding order and were trying to use the replication network as primary, losing access to AD and rebooting (which I have read is the behaviour for Exchange now). It appears the
    Exchange Health service has killed WININIT which causes the crash.
    Thanks!!!
    The crash dump text is below:
    CRITICAL_OBJECT_TERMINATION (f4)
    A process or thread crucial to system operation has unexpectedly exited or been
    terminated.
    Several processes and threads are necessary for the operation of the
    system; when they are terminated (for any reason), the system can no
    longer function.
    Arguments:
    Arg1: 0000000000000003, Process
    Arg2: fffffa80192ebb30, Terminating object
    Arg3: fffffa80192ebe10, Process image file name
    Arg4: fffff80001dc37b0, Explanatory message (ascii)
    Debugging Details:
    PROCESS_OBJECT: fffffa80192ebb30
    DEBUG_FLR_IMAGE_TIMESTAMP:  0
    MODULE_NAME: wininit
    FAULTING_MODULE: 0000000000000000
    PROCESS_NAME:  MSExchangeHMWo
    BUGCHECK_STR:  0xF4_MSExchangeHMWo
    CUSTOMER_CRASH_COUNT:  1
    DEFAULT_BUCKET_ID:  DRIVER_FAULT_SERVER_MINIDUMP
    CURRENT_IRQL:  0
    LAST_CONTROL_TRANSFER:  from fffff80001e4cab2 to fffff80001abebc0
    STACK_TEXT:  
    fffff880`0d7f39c8 fffff800`01e4cab2 : 00000000`000000f4 00000000`00000003 fffffa80`192ebb30 fffffa80`192ebe10 : nt!KeBugCheckEx
    fffff880`0d7f39d0 fffff800`01df7abb : ffffffff`ffffffff fffffa80`1bcf3060 fffffa80`192ebb30 fffffa80`383ea060 : nt!PspCatchCriticalBreak+0x92
    fffff880`0d7f3a10 fffff800`01d77674 : ffffffff`ffffffff 00000000`00000001 fffffa80`192ebb30 00000000`00000008 : nt! ?? ::NNGAKEGL::`string'+0x17486
    fffff880`0d7f3a60 fffff800`01abde53 : fffffa80`192ebb30 fffff880`ffffffff fffffa80`1bcf3060 00000000`00000000 : nt!NtTerminateProcess+0xf4
    fffff880`0d7f3ae0 00000000`7772157a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
    00000000`34eed638 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x7772157a
    STACK_COMMAND:  kb
    FOLLOWUP_NAME:  MachineOwner
    IMAGE_NAME:  wininit.exe
    FAILURE_BUCKET_ID:  X64_0xF4_MSExchangeHMWo_IMAGE_wininit.exe
    BUCKET_ID:  X64_0xF4_MSExchangeHMWo_IMAGE_wininit.exe
    Followup: MachineOwner

    Hi Darrkon,
    I suggest checking the status of the HealthMailbox on each of servers.
    Also try to re-create the mailbox. You can safely delete and recreate health mailboxes.
    Be aware that any local Managed Availability probes that are using the these mailboxes will fail until the Microsoft Exchange Health Manager is restarted.  Once that service is restarted, it will recreate any mailboxes that it needs. 
    More details in the following similar thread, just for your reference:
    BSOD after creating DAG
    http://social.technet.microsoft.com/Forums/exchange/en-US/44d1cd98-cba1-4ed0-b0e7-8aa76ee3eabc/bsod-after-creating-dag
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

Maybe you are looking for

  • Universal analog to digital video converters

    I have an old Formac Studio converter that requires a $75 EPRON upgrade to work with the newer editions of iMovie; Therefore, I am considering just buying a new video converter to convert old video tapes to DVDs. I could only find a 2004 review, and

  • Cant install itunes 9 help!!!!!!!!

    i get a message saying "invalid drive P:/" and that it was unsuccessful what does this mean ne help would be great!!!!! i cant add music till i get 9 installd

  • BC sites in CC

    Why can't I see my Business Catalyst test sites in my Creative Cloud account? They showed up when I had 4 test sites, now I have 6 and there's nothing showing anymore.

  • Error 3001 when downloading Safari 3.1

    Hello. I have the Safari 3.1 update showing in my Software Update (in my Intel iMac with Leopard). I've applied all other software updates without problem but when updating this one I get: The update "Safari" can't be saved. A networking error has oc

  • Satellite L850: Playing a Game - holding spacebar freezes cursor

    Got my first Toshiba with my first Windows 8 experience so IDK. But, I play some games where the spacebar its needed to play the game, holding spacebar and double clicking on a map it allows u to select whatever u want. With this Satellite L850-1P9 I