Applying OSS note 859111

Hi,
I need to apply this note.
The highest support package for this note in  46C is SAPKH46C50 and in
the system tht i am working it is SAPKH46C45 so will it create any problem while implementing the note? if den how do i overcome tht?

You'll have no problem, apply the note using SNOTE and if at some point in the future support pack 50 is applied it will just replace it with the version in the patch.
Regards
Nick

Similar Messages

  • How to apply OSS note and how to use it?--thanks

    Hi, morning all,
    I want to know how to apply OSS notes and how to use it, pls help me.
    Thanks.

    Applying OSS note is a critical activity in the system. Usually this task is carried out by the basis, as they maintain the system and the notes, support packs, etc.
    A OSS note has potential to impact the system in several ways. So it is better to work with the basis if  you need to apply a OSS note to be applied.
    Transaction code is Snotes. But pl dont attempt to apply by yourself.
    Reg your other question as how to use the OSS note, there is nothing like using aOSS note. Just apply and depending on what the notes do, it may change the config, or download a program or something.
    Ravi Thothadri

  • How can we apply OSS notes in BW or BI.

    Dear Friends , how are you all.
    Could anyone please tell the process about How can we apply OSS notes in BW or BI.
    What is the difference between LO extractors and FI extractors.
    It would be helpful to me.
    Thanks in Advance,
    Kalyan

    Hi,
    Using T Code SNOTE we can apply the OSS notes.
    Also
    OSS is Online support system runs by SAP to support the customers.
    You can access this by entering OSS1 transaction or visit Service.SAP.Com and access it by providing the user name and password.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fe8dbb80-0c01-0010-fe84-b76d0d07db34
    SAP Notes
    IN BW T.Code SNOTE, here you can see all the notes which has been applied.. also u can apply a new note in this T.Code.
    http://service.sap.com/notes
    Whenever there is a short dump, in section 'How to correct the error' keywords are given so that you can search relevant OSS
    Notes.
    Best way is to search with the Note Number if you know one. Else, you can search with restriction by giving proper version,
    application area, priority, release status etc along with keywords.
    Thanks,
    JituK

  • I'm facing problem while applying OSS Note 1046758

    Hi gurus,
    I'm facing problem while applying OSS Note 1046758. That note is asking to create <b>J_1IEWT_ACKN_N</b> table.
    After creating the table I went to the UTILITIES menu => TABLE MAINTENANCE GENERATOR.
    Then OSS Note 1046758  is asking us to give the function group name as <b>J_1IEFILE</b>.
    Next Choose <b>One Step</b>.
    and then <b>Find Screen Numbers</b>.
    While clicking the CREATE button it is not allowing me to assign the function group group J_1IEFILE.
    How to overcome this problem.
    Very urgent.
    Any answers are welcome and will be rewarded .
    Regards,
    Jacob Charles S.

    Hi Sheeba,
    I have applied the follwoing notes.
    1046758 -- To display acknowledgement number in Form No 16A
         558469
         983795
         498087
         912767
         773171
         891923     -- 452805  (Correction Made)
    905220 -- Blank Values for TDS, Surcharge & Ecess in new certificate
         923216
         833092
    984623 -- J1INCERT:Consolidated Issues - SEP 2006
    Eventhough I'm not getting the those values in the respective fields.
    I mean, TDS Rate, ECESS Rate and CHENCK NUMBER.
    More over, I want the FROM 16A should contain the Higher Education CESS field with values.
    any notes has to be applied apart from this or what....
    Wht are the table I have to maintain for this in SM30.
    Kindly help me... It's urgent...
    Regards,
    Jacob Charles S.

  • Applying OSS notes?

    Dear Friends,
    i want to know how to apply OSS notes in the BW or R/3 system. Please help.
    Thanks
    Raj

    Hi
    go to the tab correction instructions, select the appropriate ref correction depending on your release
    Have a look at the object type (MF or program) copy the object name go to se37 or SE38 depending on the object fill the object name and follow the instructions "delete block" or " insert block" to apply the note.
    Hope this helps and that responds to your question
    regards
    Boujema

  • Apply OSS note

    Hi BI experts,
    What access is required to apply OSS notes. one i know is SNOTE. Do we need OSS2 . Could you recomend me other transactions. I need to apply OSS notes. I need to ask for access to various transactions.
    Please suggest.
    Regards,
    BWer

    Diego,
    Thanks for the suggestions.
    Do you know what would be process using solution manager ?
    Regards,
    BWer

  • Use solution manager to create customer message and apply oss notes

    Hello All,
    Is it possible to use SAP Solution Manager to create/ open Customer Messages and for the application of OSS notes in satellite systems via solution manager?
    Currently, our Solution Manager system is bieng used for Central System Monitoring!
    Please let me your your expert thoughts!
    Thanks,
    Antarpreet

    Hi,
    By using Service Desk scenario of Solution Manager you can convert an issue to an OSS message and follow it up.
    Refer the  [Link|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
    Snote application is also integrated with this Service Desk, you can apply SAP notes to any satellite systems.

  • No change request created when applying OSS Note

    Hi,
    I have applied around 3 OSS Notes to my ECC 5.0 system. I got a promt for the change request creation. I have created a new change request and then saved it.
    But when I applied the next 2 OSS Notes, i didn't get any prompt to create or select the existing request.
    How can I create a change request for this application of OSS Notes and how to transport them to quality if i dont have a request number?
    Thanks
    Vijay

    Hi Vijay,
    I think this is normal if the objects being changed by the OSS Note are already held in an earlier change request owned by you (or others) and has not been released.
    Use transaction SE03 to search for the objects being changed by the OSS Notes (you will get object name in the note itself) and find out which change request is holding the object.
    Once you find the change request either unlock it or release it (depending on your company process/policies) and then re-implement the OSS Note.
    Hope that helps.
    Regards,
    Siddhesh

  • Applying OSS Note

    Hi,
      Can anyone tell me, how do I apply a OSS Note to any particular application after downloading the note from service.sap.com.
    Any help would be highly rewarded.
    Rgds,

    Hi Sailatha,
                You can apply the note that you have downloaded through the transaction SNOTE.But it is most important that you go through the steps specified in the note.It will tell you what needs to be done.If there are manual corrections required like changing the parameters then you cannot work with SNOTE.If you have an OSS note id then log onto OSS1 and you will find more info there.
    Cheers
    Nishanth

  • Shall I undo the Applied OSS notes

    Hi Team,
    I applied 3 OSS notes in my BI system using SNOTE Transaction after BI 7 patch 12. Now I want back to the original state of the system by un doing the 3 OSS notes. My question: Is it possible to undo the applied ossnotes ? If yes please let me know the procedure?
    Thanks in advance.
    Regards
    Ramana
    Edited by: Ramana Murthy on Jan 17, 2008 4:30 AM

    Yes go to snote T code and then press clt+F2... it is available in start screen itself...
    Thanks...
    please assign points if useful...

  • Help needed applying OSS note 981295 in SAP ECC 5.0 with SAP Kernel 640_REL

    Hi Experts,
    Our functional team is trying to implement a kind of workflow through a notification via SAP Inbox (transaction code SBWP) after the release of a Purchase Order (Transaction code ME29), this is every time when a purchase order is released through transaction code ME29, a notification will be sent to the SAP Inbox (transaction code SBWP). So according to this they told me to implement OSS note 981295, but using transaction SNOTE I get the message that this note can't be implemented in my system this because my SAP Kernel version is the release 6.40 and the needed SAP Kernel for this note is from version 7.00 to version 7.10. So what do you recommend please in this case in order to implement the required functionality on our SAP ECC 5.0 System?
    Best Regards,
    Erik Espinosa

    Note clearly states
    This note is only relevant if the following Support Package is installed in the system:
    NW04s: Support Package SAPKB70008
    Meaning is not relevat to your case. You need to keep looking... if you open an OSS message people from SAP might put you in the right direction.
    Regards
    Juan

  • Applying OSS note with attachments

    Hi All,
    I am trying to implement one sap note. This note contain two attached files. Bot are having the file extension .SAR. How to implement such kind of OSS note.
    Please reply.
    Thank you

    Hi JJ,
    In some cases , when objects are not present in Customer systems then SAP will provide objects in difff ways
    1.Providing source code with in note as a attechments
    2.Providing External trannsport Request, this request as same as ur normal transport requet which consists of CO and Data files.So we have to add these files to out TP buffer , after that we can import all these into ur DEV server and so on.
    so ask ur basis person, i think we can give so good idea how this will works.
    Regards
    Prabhu

  • Want to apply OSS Notes

    Hi,
    I want to apply the SAP Notes 97098.
    Now in this note program ZZTEST00 is mentioned to execute.
    But we are not having this program in our system.
    What extactly I need to do to get this program in my system.
    Regards,
    Aditya

    You will need to create the Program ZZTEST00 in your DEV Client and Transport to your Production Client.  Have your ABAPer look at the note and create the program per the note and pay attention to the note  towards the bottom.   If you have several documents in error, he may want to modify the z Program accordingly.

  • Where do i find OSS notes and how to apply them

    hi,
    i have never applied OSS notes .
    so wanted to know where can i find the OSS note(444966)
    and what is the procedure to apply it

    Hi siddharth,
    1. Now its on net.
    2. http://service.sap.com/notes
    3. This is the site where sap notes can
      be found.
    4.   But,
    U will have to contact ur basis team
    There u need a user id and a password.
    (It might be some common userid and pasword
    which ur basis team might be able to provide)
    regards,
    amit m.

  • Oss note applying

    Hi,
      Now am applying Oss Note according to Note documentation. i applied note  for Abap code correction but I am getting Errors .
    What i have to do? can i raise Oss for that or not

    Hi,
    There may be some prerequisted notes or manual corrections for that note. go through all the documentaion provided in note.
    Regards,
    Srinivas ch

Maybe you are looking for

  • Transforming XML using XSLT more than once

    Hi, I am trying to transform an XML Document object in Java. However, it requires 2 transforms as each of them is complicated and needs to be generic enough for use by different XML strings. So I have a single XML string and two XSLT files. Currently

  • How to refer an application item in a java script ?

    Hi Friends, I have a simple java script for disabling an item as below : <script language="JavaScript1.1" type="text/javascript">     function disFormItems(item1)       if ($x(item1).value != "")           disItem = document.getElementById(item1);   

  • Creating Bookmarks

    Hi, I'm looking for some help in automatically creating bookmarks in a pdf file. I know the manual way of going about it, but in case of 200-300 pages it's quite a pain! How would the JavaScript know which title to give to the bookmark? Thanks in adv

  • Can I bulk-add to library after install?

    When I first installed iTunes it offered to import all my existing media (mostly WMA lossless).  I declined because I wanted to first set the default directory to a different drive and set the defauly import format to Apple Lossless....but now I cant

  • Fonts in EPUB files

    When I generate output as an eBook, the results do not use the correct fonts.  I assume I need to embed the fonts somehow, but I have not been able to find a way to do this.  The font names are listed in the .css file, so I don't think that's the pro