Applying patch for MDM5.5 SP4 to SP5
Hi,
We have a discovery system with MDM 5.5 version having patch level SP4.
Now we want to apply patch SP5.
can anybody tell me the step by step procedure for applying patch for MDM.
Regards
Anil D
Hi Dasari
You can find the upgrade guide here:
https://service.sap.com/installmdm -> Previous Releases (ZIP Files) -> MDM 5.5 SP05 - Planning & Installation Guides -> MDM 5.5 SP05 - Upgrade Guide.pdf
Please also check the release note: 1025897 - MDM 5.5 SP05 Release
Basically you will have to:
- stop User activity, archive your repositories, backup the binaries, stop all mdm processes
- uninstall SP04, install SP05 (including the gui client components)
- restart mdm and upgrade the repostories with the console
- depending on your installation, update other compenents (java api in EP...)
I suggest you go to the most recent SP05 version, there are quite a few patches and hotfixes for SP05. BTW SP06 is already available as well, we will be moving to SP06 pretty soon.
Regards
Michael
Similar Messages
-
Hi, Good morning:
I am trying to apply patch for my newly installed Oracle10.2.0.1, I downloaded the Opatch utility and extracted it directly into oracle_home, and then I downloaded the latest patch 5500927 and extracted into oracle_home/opatch....
Now, if I do ' opatch inventory ' under oracle_home/optach, it will give
D:\Oracle10g\OPatch>opatch lsinventory
The system cannot find the file specified.
Java could not be located. OPatch cannot proceed!
OPatch failed with error code = 1
If I do 'opatch lsinventory ' under oracle_home/opatch/5500927 it will give :
D:\Oracle10g\OPatch>cd 5500927
D:\Oracle10g\OPatch\5500927>opatch lsinventory
'opatch' is not recognized as an internal or external command,
operable program or batch file.
I know I have JVM in my machine, and the JDK is version 1.4...
Can anyone help me ? what did I do wrong?
Thanks a lot.
Wendywhat a sec..the home does not look right, did you change it on installation?
set oracle_home=d:\oracle\product\10.2.0\db_1
set oracle_sid=your_sid
opatch lsinventory
if that doesn't work, look at your PATH, see what is going on there
you might want to put the "opatch" sub-dir into your path..or create a couple of CMD files to set it all the time. -
Hi All,
I am trying to apply a weblogic patch on SOA server but facing an error while applying the Opatch . I checked the accessibilty to opatch inventory by using the command % opatch lsinventory . This executed fine and there were no errors. But when I try applying the opatch I get the error -that some jars missing . Even if I replace the jars and try executing opatch again I face the same error . I googled a lot but couldnt find any solution . Please let me what can be done for solving this error .
D:\7337034>opatch apply -oh D:\product\10.1.3.1\OracleAS_1
Oracle Interim Patch Installer version 1.0.0.0.61
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
Oracle Home : D:\product\10.1.3.1\OracleAS_1
Oracle Home Inventory : D:\product\10.1.3.1\OracleAS_1\inventory
Central Inventory : C:\Program Files\oracle\inventory
from : N/A
OUI location : D:\product\10.1.3.1\OracleAS_1\oui
OUI shared library : D:\product\10.1.3.1\OracleAS_1\oui\lib\win32\oraInstalle
r.dll
Java location : "D:\product\10.1.3.1\OracleAS_1\jdk\jre\bin\java.exe"
Log file location : D:\product\10.1.3.1\OracleAS_1/.patch_storage/<patch ID>
/*.log
Creating log file "D:\product\10.1.3.1\oracleas_1\.patch_storage\7337034\Apply_7
337034_06-02-2009_13-39-26.log"
Provide your email address to be informed of security issues, install and
initiate Oracle Configuration Manager. Easier for you if you use your My
Oracle Support Email address/User Name.
Visit http://www.oracle.com/support/policies.html for details.
Email address/User Name: [email protected]
Provide your My Oracle Support password to receive security updates via your My
Oracle Support account.
Password (optional):
Password (optional):
Unable to establish a network connection to Oracle. If your systems require a
proxy server for outbound Internet connections, enter the proxy server details
in this format:
[<proxy-user>@]<proxy-host>[:<proxy-port>]
If you want to remain uninformed of critical security issues in your
configuration, enter NONE
Proxy specification: NONE
** Installing base package **
Deploying core - Version 10.3.1.0.0
Deploying engines - Version 10.2.7.1.0
Deploying metricdata - Version 10.2.4.0.3
Deploying scripts - Version 10.3.1.0.0
Oracle Configuration Manager has been configured in disconnected mode. If the
target ORACLE_HOME is running a database, please refer to the
"Post-installation Database Configuration" section of the OCM Installation
and Administration Guide
(http://www.oracle.com/technology/documentation/ocm.html) to complete the
installation.
View configuration data reports and access valuable configuration best
practices by going to My Oracle Support.
Backing up comps.xml ...
OPatch detected non-cluster Oracle Home from the inventory and will patch the lo
cal system only.
Please shut down Oracle instances running out of this ORACLE_HOME
(Oracle Home = d:\product\10.1.3.1\oracleas_1)
Is this system ready for updating?
Please respond Y|N >
y
Applying patch 7337034...
Patching jar files...
OPatch encounters the following issues during file patching:
The following java archives on Windows had problems with being patched:
1. orabpel.jar
[ object: DomainFilter.class ]
2. orabpel.jar
[ object: AdapterFrameworkListenerImpl$RoutingRuleXPathInfo.class ]
3. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
4. orabpel.jar
[ Couldn't make backup copy of file. ]
5. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
6. orabpel.jar
[ Couldn't make backup copy of file. ]
7. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
8. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
9. orabpel.jar
[ Couldn't make backup copy of file. ]
Replying 'Y' will terminate the patch installation immediately. It WILL NOT rest
ore any updates that have been performed to this point. It WILL NOT update the i
nventory.
Replying 'N' will update the inventory showing the patch has been applied.
NOTE: After replying either 'Y' or 'N' it is critical to review:
My Oracle Support Note 312767.1 How to rollback a failed Interim patch ins
tallation.
Do you want to STOP?
Please respond Y|N >
y
File Patching Error!
ERROR: OPatch failed during patching, possibly due to missing files.
OPatch returns with error code = 200Hi , I am facing the same issue.
were you able to resolve it.
please let me know if you were.
Many Thanks. -
Error applying patch for bug 4554072 (APEX 2.2.1 requirement)
All,
I am installing APEX 2.2.1 and is trying to apply the patch for bug 4554072. I have checked the OWA version:
SQL> select owa_util.get_version from dual;
GET_VERSION
10.1.2.0.0
And When I am trying to execute the privht8.sql script I get the following errors:
SQL> @904x_1012x/privht8.sql
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY HTF:
LINE/COL ERROR
19/10 PLS-00323: subprogram or cursor 'TITLE' is declared in a package
specification and must be defined in the package body
21/10 PLS-00323: subprogram or cursor 'HTITLE' is declared in a package
specification and must be defined in the package body
35/7 PL/SQL: Statement ignored
35/15 PLS-00307: too many declarations of 'TITLE' match this call
205/7 PL/SQL: Statement ignored
205/15 PLS-00307: too many declarations of 'ANCHOR' match this call
433/7 PL/SQL: Statement ignored
LINE/COL ERROR
433/14 PLS-00307: too many declarations of 'EM' match this call
443/7 PL/SQL: Statement ignored
443/14 PLS-00307: too many declarations of 'KBD' match this call
829/7 PL/SQL: Statement ignored
829/14 PLS-00307: too many declarations of 'TABLEDATA' match this call
834/7 PL/SQL: Statement ignored
834/14 PLS-00307: too many declarations of 'TABLEDATA' match this call
836/7 PL/SQL: Statement ignored
836/14 PLS-00307: too many declarations of 'TABLEDATA' match this call
840/8 PL/SQL: Statement ignored
840/15 PLS-00307: too many declarations of 'TABLEDATA' match this call
LINE/COL ERROR
914/9 PL/SQL: Statement ignored
914/24 PLS-00307: too many declarations of 'ESCAPE_SC' match this call
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY HTP:
LINE/COL ERROR
14/11 PLS-00323: subprogram or cursor 'TITLE' is declared in a package
specification and must be defined in the package body
15/11 PLS-00323: subprogram or cursor 'HTITLE' is declared in a package
specification and must be defined in the package body
1691/7 PL/SQL: Statement ignored
1691/7 PLS-00307: too many declarations of 'PRINT' match this call
1694/7 PL/SQL: Statement ignored
1694/7 PLS-00307: too many declarations of 'PRINT' match this call
1697/7 PL/SQL: Statement ignored
LINE/COL ERROR
1697/7 PLS-00307: too many declarations of 'PRN' match this call
1700/7 PL/SQL: Statement ignored
1700/7 PLS-00307: too many declarations of 'PRN' match this call
1703/7 PL/SQL: Statement ignored
1703/7 PLS-00307: too many declarations of 'PRINT' match this call
1706/7 PL/SQL: Statement ignored
1706/7 PLS-00307: too many declarations of 'PRINT' match this call
1709/7 PL/SQL: Statement ignored
1709/7 PLS-00307: too many declarations of 'P' match this call
1712/7 PL/SQL: Statement ignored
1712/7 PLS-00307: too many declarations of 'P' match this call
LINE/COL ERROR
1715/7 PL/SQL: Statement ignored
1715/7 PLS-00307: too many declarations of 'P' match this call
SQL>
Any ideas? I am hoping that I am just tired and is doing something really stooopid ;-)
Cheers,
AndyAndy,
From the README.txt included with that patch:
- If the PL/SQL Web Toolkit version is either 9.0.4 series or 10.1.2 series and
the database version is higher than 8.1.7.4
SQL> @904x_1012x/privht.sql
SQL> exit
I’m assuming your database version is higher than 8.1.7.4. If so, then you need to run privht.sql and not privht8.sql.
Joel -
Hi All,
I am working on xapps for Mobile to implement CRM mobile sales for handheld using CRMHH 5.0. For that I am using the WAR file MSAHH02_0-10003081.ZIP( xMSA FOR HH (WITH CRM) 5.0 SR02 ) available on SAP marketplace.
Now I want to apply the patch available for the same i.e. MSAHH02P_4-10003081.ZIP(Patch for MSA FOR HH (WITH CRM) 5.0 SR02 )
Can anyone please tell the procedure to apply the patch.
Thanks & Regards
SumitHI
For latest patches you can check at
http://service.sap.com/swdc -> Support Packages and
Patches -> Entry by application -> Application Components
-> SAP ERP -> ERP2004 -> SAP ECC Server
There are two kinds of kernal files:
SAPDBEXE and SAPEXE,one is DB dependent and one file is DB independent.
For downloading the kernal patch:Follow the below path as per your OS and DB combination
for downloading a kernel patch
go through following
service.sap.com/swdc
downloads-> SAP Support packages -> My Company's Application Components -> SAP KERNEL 32 bit ->SAP KERNEL 4.6D 32-BIT ->SAP KERNEL 4.6D 32-BIT->Windows Server on IA32 32bit -> Select ur database->Windows Server on IA32 32bit
Reward suitable points -
Apply patch for oracle10g on window
Hi Experts,
I am new person.
I try to apply patch 1024 for oracle 10G R1 at 32 bit window.
Patch 1024 Installation Instructions for Single Instance
Follow these steps:
1.
Cleanly shut down all processes running from the ORACLE_HOME.
2.
Set the ORACLE_HOME environment variable to the correct Oracle home that needs to be patched.
> set ORACLE_HOME=<Oracle Home Path>
3.
Go to the directory where you downloaded the patch:
> cd 7584866
4.
Ensure that the directory containing the OPatch script appears in your PATH setting. Enter the following command to run OPatch:
> opatch apply
My steps shows as
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\jzhu>cd \
C:\>echo oracle_home
oracle_home
C:\>set oracle_home=C:\oracle\product\10.2.0
C:\>echo $oracle_home
$oracle_home
C:\>
I download patch at C:\patch\7584866
then go to DOS
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\>cd C:\patch\7584866
C:\patch\7584866>
C:\patch\7584866>opatch apply
'opatch' is not recognized as an internal or external command,
operable program or batch file.
I got a above error.
however, i check my system that opatch patch as C:\oracle\product\10.2.0\db_1\BIN\OPatch
if i go to this patch
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\jzhu>cd \
C:\>echo oracle_home
oracle_home
C:\>set oracle_home=C:\oracle\product\10.2.0
C:\>echo $oracle_home
$oracle_home
C:\>cd C:\oracle\product\10.2.0\db_1\BIN\OPatch
C:\oracle\product\10.2.0\db_1\BIN\OPatch>opatch apply
File Not Found
Java could not be located. OPatch cannot proceed!
OPatch failed with error code = 1
C:\oracle\product\10.2.0\db_1\BIN\OPatch>
I got another error as OPatch failed with error code = 1.
I also found the inventory patch as C:\Program Files\Oracle\Inventory
What wrong?
Could help me to apply patch in detail? It is my first time for thsi point.
Thanks
JImHi Expert,
I saw a opatch bat file in directory(C:\oracle\product\10.2.0\db_1\BIN\OPatch>)
However, I got an error when i run opatch.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\oracle\product\10.2.0\db_1\BIN\OPatch>opatch
File Not Found
Java could not be located. OPatch cannot proceed!
OPatch failed with error code = 1
C:\oracle\product\10.2.0\db_1\BIN\OPatch>opatch
File Not Found
Java could not be located. OPatch cannot proceed!
OPatch failed with error code = 1
C:\oracle\product\10.2.0\db_1\BIN\OPatch>
What is wrong? I set oracle home =C:\oracle\product\10.2.0\db_1
Which Java version do i need to install based on message --Java could not be located. ?
Please help me.
Thanks
Jim
Edited by: user589812 on Feb 24, 2009 8:48 AM -
Urgent help needed while applying patch for upgrade with conflicts
I try to upgrade 11.2.0.2 to 11.2.0.3 on LInux environment.
I have to apply patch P1253900 before the upgrade per oracle doc.
however I got following conflict:
Verifying environment and performing prerequisite checks...
Checking skip_duplicate
Checking skip_subset
Conflicts/Supersets for each patch are:
Patch : 12539000
Conflict with 12827726
Conflict details:
/u01/app/grid/product/11.2.0/grid/lib/libserver11.a:/ksxp.o
Following patches have conflicts: [ 12827726 12539000 ]
Refer to My Oracle Support Note 1299688.1 for instructions on resolving patch conflicts.
I checked above oracle note, and did not say any resolution.
If anybody had the same issue before, please help me with the resolution.
Thanks in advance.Follow the steps in this MOS Doc
Database Patch conflict resolution [ID 1321267.1]
This MOS Doc is referenced in 1299688.1
HTH
Srini -
Problems applying patch for Jena adapter
I got errors when applying the patch to 11g (11.1.0.6) for the Jena Driver (from OTN). I executed each .sql/.plb file in the order stated by the patch instructions:
jenadrv_patch_ig.txt: Step-by-step instructions (new Oracle Database 11g installation). When I executed sdordfxb.plb I got the folowing:
SQL> @sdordfxb.plb
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY SDO_RDF:
LINE/COL ERROR
1243/5 PL/SQL: Statement ignored
1243/28 PLS-00302: component 'ANALYZE_MODEL' must be declared
1272/5 PL/SQL: Statement ignored
1272/28 PLS-00302: component 'ANALYZE_RULES_INDEX' must be declared
1298/5 PL/SQL: Statement ignored
1298/28 PLS-00302: component 'DELETE_MODEL_STATS' must be declared
1317/5 PL/SQL: Statement ignored
1317/28 PLS-00302: component 'DELETE_RULES_INDEX_STATS' must be declared
Synonym created.
Synonym created.
Grant succeeded.
After this the SDO_RDF package could not be found when making semantic API calls.
Any idea what I did wrong? I rolled back from the patch by re-executing the backed up (pre-patch) versions of the .sql and .plb files which successfully restored the SDO_RDF package but I still can't install the patch.
Thanks.After trying to re-run the patch process I couldn't get catsem11i to run successfully. I have dropped my models, network, and removed the model data tables (that I originally created) containing SDO_RDF_TRIPLE data types so I'm not sure why I'm getting the error below. Any idea where else these dependenices could be or how to fully clean?
C:\app\skagels\product\11.1.0\db_2\md\admin>sqlplus / as sysdba
SQL*Plus: Release 11.1.0.6.0 - Production on Thu May 8 14:51:46 2008
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> @catsem11i.sql
install 11 RDF
check privileges
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Uninstall 10.2 RDF? => ?/rdbms/admin/nothing.sql
declare
ERROR at line 1:
ORA-20000: Cannot proceed. Dependencies for RDF 11 type SDO_RDF_TRIPLE[_S]
(count=6)
ORA-06512: at line 81
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
C:\app\skagels\product\11.1.0\db_2\md\admin> -
Apply patch for Non MetaLink Members
How do you apply a patch if you're using an evaluation version of 11i and do not have a CSI to join metaLink?
What's the point if you cannot get help with a software full of patches?
Is there a way around this.
Can anyone spare a CSI number?CSI is for customer support who pay for that. You are eligible to get patch if you buy the oracle product for 30 or 90 days eval. contact oracle cust.support if you fall within the limit. No one spares the cust.support number.
-
Applying patch for WLS 10 license expiration does not help
I recently upgraded my BEA installation from 9.2 to 10.0. I applied the 2VJT patch to my installation of WLS10 to get around the licensing problem. But the patch does not seem to help and i still get the license expired error.
To verify that the patch has been applied, i checked using the bsu scripts and shown below is the output.
Any clues on what is missing?
Thanks
Ramdas
ProductName: WebLogic Server
ProductVersion: 10.0
Components: WebLogic Server/Server,WebLogic Server/Server Examples,WebLogic Server /Server Add-ons,WebLogic Server/Evaluation Database
BEAHome: /u1/toro/toro/toro/tools/bea-wl9.2
ProductHome: /u1/toro/toro/toro/tools/bea-wl9.2/wlserver_10.0
PatchSystemDir: /u1/toro/toro/toro/tools/bea-wl9.2/utils/bsu
PatchDir: /u1/toro/toro/toro/tools/bea-wl9.2/patch_wls1000
Profile: Default
DownloadDir: /u1/toro/toro/toro/tools/bea-wl9.2/utils/bsu/cache_dir
JavaHome: /u1/toro/toro/toro/tools/bea-wl9.2/jdk150_06
JavaVersion: 1.5.0_06
JavaVendor: Sun
Patch ID: 2VJT (CR322214)Further debugging the issue, shows that the PATCH_CLASSPATH being picked up is wrong and points to the 9.2 version instead of the wls10.0. Not sure how to fix this since the rest of the JARs are from the wls10 version as is seen here (fyi bea-wl9.2 is BEA_HOME)
CLASSPATH=:/usr/local/bea/patch_weblogic920/profiles/default/sys_manifest_classpath/weblogic_patch.jar:
/u1/toro/toro/toro/tools/bea-wl9.2/jrockit90_150_06/lib/tools.jar:
/u1/toro/toro/toro/tools/bea-wl9.2/wlserver_10.0/server/lib/weblogic_sp.jar:
/u1/toro/toro/toro/tools/bea-wl9.2/wlserver_10.0/server/lib/weblogic.jar:
/u1/toro/toro/toro/tools/bea-wl9.2/modules/features/weblogic.server.modules_10.0.0.0.jar:
/u1/toro/toro/toro/tools/bea-wl9.2/modules/features/com.bea.cie.common-plugin.launch_2.1.0.0.jar:
/u1/toro/toro/toro/tools/bea-wl9.2/wlserver_10.0/server/lib/webservices.jar:
/u1/toro/toro/toro/tools/bea-wl9.2/modules/org.apache.ant_1.6.5/lib/ant-all.jar:
/u1/toro/toro/toro/tools/bea-wl9.2/modules/net.sf.antcontrib_1.0b2.0/lib/ant-contrib.jar:
/u1/toro/toro/toro/tools/bea-wl9.2/wlserver_10.0/common/eval/pointbase/lib/pbclient51.jar:
/u1/toro/toro/toro/tools/bea-wl9.2/wlserver_10.0/server/lib/xqrl.jar:
Thanks
Ramdas -
Applying Patch for OC4J to update JDBC Driver
I've downloaded a patch (3335848) for OC4J in order to update the JDBC drivers from metalink for windows. The Readme file says its generic for all OS but got to execute a shell script for unix OS. Im using Windows. How to update the patch in Windows. Pls help. The Readme file doesn't explain this.
Thanks
ManojI'm not sure why it only contains a shell script if its tagged as generic.
One thing you could do it to read the shell script and see what it does, then replicate that manually.
-steve- -
Help-urgent - how to update service pack and apply patches for ADS
Dear all,
I've just download the sp 11 and the patch ,how should i update my ADS? I've try to search the forum but to no avail. Pls advise,thanks.
Regards,
JoanHi Joan,
To deploy an SCA or SDA, proceed as follows:
1. Make sure you have downloaded the SCA or SDA from SAP Service Marketplace.
2. Start the SDM GUI. To do this, execute the following file:
a) Windows: RemoteGui.bat in folder \usr\sap\<SID>\<instance>\SDM\program
b) Unix: RemoteGui.sh in folder /usr/sap/<SID>/<instance>/SDM/program
3. The SDM GUI screen appears.
Note: With SAP Web Application Server 6.30 the SDM server is started whenever you start the SAP system. To check whether the SDM server is running, use the tools SAP Management Console (Windows) or jcmon (UNIX).
4. Choose "SDM Gui -> Login" or the icon "Connect to SDM Server". The dialog box "Enter Login Information for SDM Server" appears.
5. Enter the following information:
a) Password
The initial password is "sdm" (without quotes).
b) User description (optional)
c) Hostname
d) Port
With instance number 00, the default port number is 50018. If your instance number is different from 00, the port number changes to
Port = 50018 + 100 x <instance number>.
You have to calculate the new port number and enter it manually.
6. Choose "Login". The SDM GUI appears.
7. Choose tab "Deployment".
8. Choose "Add SCA/SDA to Deployment List (Local File Browser)". A file selection screen appears.
9. Select the SCA or SDA file you would like to deploy and choose "Next" to read the information on the following screens.
10. Choose "Next" until the "Start" button appears.
11. Choose "Start". After the SCA or SDA has been completely deployed, a success message appears.
12. Choose "Confirm" to return to the SDM GUI.
13. When you have finished work, log out from the SDM server. Choose "Deployment -> Logout" or the icon "Disconnect from SDM server" for this.
If this answers your question, please mark the question accordingly and do award points if helpful.
Regards,
Arafat -
Problem when apply SAP Bundle Patch for 10.2.0.5
Hi,
We are trying to apply SAP Bundle Patch (SBP) SAP_102052_201102_SOL64.zip and SAP_102052_201103_SOL64.zip using MOPatch utility. Both MOPatch and OPatch utility have been updated with the latest download from SAP. When applying patch for SAP_102052_201102, most patches went through except for one patch that requires OPatch to be version 10.2.0.5.0. The OPatch version downloaded from SAP is 10.2.0.4.9. Even the OPatch delievered together in the SAP_102052_201102_SOL64.zip file is 10.2.0.4.9.
Below are extract of the opatch log file for this patch:
INFO:ApplySession applying interim patch '10248542' to OH '/oracle/DEV/102_64'
INFO:Starting to apply patch to local system at Wed Mar 23 10:49:25 SGT 2011
SEVERE:OUI-67073:ApplySession failed: ApplySession failed to prepare the system.
Patch 10248542 requires OPatch version 10.2.0.5.0.
The OPatch version being used (10.2.0.4.9) doesn't meet the minimum version required by the patch(es). Please download latest OPatch from My Oracle Support.
INFO:System intact, OPatch will not attempt to restore the system
INFO:Finishing ApplySession at Wed Mar 23 10:49:25 SGT 2011
INFO:Total time spent waiting for user-input is 0 seconds. Finish at Wed Mar 23 10:49:25 SGT 2011
INFO:Stack Description: java.lang.RuntimeException: ApplySession failed to prepare the system.
Patch 10248542 requires OPatch version 10.2.0.5.0.
The OPatch version being used (10.2.0.4.9) doesn't meet the minimum version required by the patch(es). Please download latest OPatch from My Oracle Support.
Help appreciated.
Regards,
LimHi,
I went to
http://service.sap.com/oracle-download
then
Oracle 10.2.0.5
then
OPatch
The file I can see there is generic for ALL operating systems and the name is:
OPatch_10205_Generic_v0.zip
it seems that the version is 10.2.0.5, not 10.2.0.4.9 as you mentioned.
I have downladed it and look at the README:
Patch summary:
README file for OPatch 10.2.0.5.0, the Oracle Interim Patching Tool.
I'm not installing it, but it seems that the version is not the same as yours.
Is this the one you have downloaded?
Have you installed it properly? => may be you are running an older one -
hi all ,
well am working on 4.7ee , sales & distribution module.
I was informed to apply patch for flow of data into ecxise invoice(thats tax determination for india).
can any one let me know "PATCH LEVEL SHOULD BE UPGRADED TO ?
THANKS.
JERRYHi,
Better check with the SMP according to your sap r/3 system versions.
http://service.sap.com/sp-stacks
After that you will have tell SP level to BASIS department, they will import it.
Regards,
Srini Nookala -
Patch for ESSBASE 11.1.2.2
Hi All,
I had Applied patch for
1. Shared Servcies 11.1.2.2 (14020629) .300patch
2.EPM Workspace 11.1.2.2 (13936087).300patch
3.Planning 11.1.2.2 (13905088) .300patch
4.FDM & FOR ERPI 11.1.2.2 (14173894).300patch
i want to apply patch for Essbase 11.1.2.2 now can i do that ?. is there any sequence ,because i had applied patchs for shared services, workspace,planning and FDM earlier thats why - ?
i had applied patch for FDM 11.1.2.2 is this same patch applies for ERPI 11.1.2.2 also - ?
i got success message in command prompt when i applied patch for FDM , but once i open webclient and workbech client in help i am not able to find .300 new patch i applied for FDM
where can we check it -?You can patch Essbase in any sequence, it will say in the readme if there are prereqs
Cheers
John
http://john-goodwin.blogspot..com/
Maybe you are looking for
-
How can I stop iCloud from deleting more photos on my PC?
I've been frustrated with the slowness of the photo stream and iCloud. So I have often just plugged my phone into my PC and manually backed up my photos into my Stream folder (the same folder that is chosen in the iCloud menu). So I had 1000's of pho
-
Why can't I just upgrade?
-
User with IE8 can't see automatically masthead
Hello, One of our Portals which was developped for external users and working via F5 shows a security message for IE8 users. This message says that the https page contains secure and non-secure objects- the user shold decide if he wishes to continue.
-
External VIdeo and Sound Connection
Not too sophisticated re computers and am still moving from XP to OSX 5.5/Macbookpro. Want to connect mac to 48" HDTV for movies, games. TV has HDMI port open and digital audio port available. Questions are re audio connection: 1. I have dvi to hdmi
-
Oracle 8.1.5 in server HP 9000 with OS HP-UX 11i v1
Hi Exists some conflict if I update a servant HP 9000 with OS HP-ux 11 to OS HP-ux 11i v1, if I have installed in 9000 servant HP oracle 8.1.5? I must lower some patches for oracle 8.1.5 ? that tendria that to become, to lower patches of oracle, to r