Applying Patches in Solaris 10 x86

Hello,
I have been testing Solaris 10 x86.
I am trying to determine the best method for applying patches, as I do not have a Sun Service Plan.
I have used smpatch analyze and smpatch update to apply the required paches to my system, but I am not sure that I am getting the patches that I should be. It seems that when I run smpatch analyze and smpatch update, not all of the patches are applied (aside from the ones that should be installed in single user mode).
I know that without a service plan, I only qualify for hardware patches and security updates.
Please advise,
Thanks for your help.

Homework question:
http://www.catb.org/~esr/faqs/smart-questions.html#homework
Review the System Requirements and Supported Platforms document. If it is not listed there it is not supported.
http://download.oracle.com/docs/cd/E10415_01/doc/nav/portal_1.htm

Similar Messages

  • Can't use DBCA after applying patch on solaris

    Hi all,
    I have installed Oracle10g 10.2.0.1.0 on Solaris, after that I have created databases which are fine creating with DBCA. After that I upgraded patch from 10.2.0.1.0 to 10.2.0.3.0. now, when I try to use DBCA, It's throwing some TNS errors.
    After that I downgraded to 10.2.0.1.0 and when I start DBCA, It's working fine.
    Is there error while applying upgrade patch?
    Please advice me...
    Thanks
    Giri

    Dear
    Relink your oracle Executables and make sure to take backup ORACLE HOME before that.
    Good Luck..
    Having Optach latest is always Good Dear .. TRY IT
    Regards,
    || Rochak ||

  • Last kernel patch for Solaris 10 x86 screwed up my kernel

    Hi,
    The last kernel patch for Solaris 10 x86 (sorry I can�t remember the patch id, but the revision is 30), available from Sun Update Manager screwed up my system.
    The system is still booting but in maintenance mode: smf can't start because of repository corrupted. Given instructions to restore the repository does not work because / filesystem is mounted read-only...
    As I am not a solaris expert, I will reinstall it from CD. I hope I won't loose the filesystem.
    I was used to blindly trust Sun solaris patches, that was a mistake.
    Laurent.

    i dont know why but still i do get default log in into the single mode
    after startup
    Requesting maintenance mode
    (See /lib/svc/share/README for aditional information. )
    Root password for system maintenance (control-d to bypass):i did removed the patch installed before so now
    SunOS jorgito 5.10 Generic_118844-26 i86pc i386 i86pcand finaly i do have milestone like this
    bash-3.00$ svcprop restarter | grep mile
    options/milestone astring svc:/milestone/multi-user:default
    dont know what to do else, also tried to synchronize boot-archive from solaris failsafe ...

  • Need Urgent Help: Solaris fails to come up after applying patch 120012-14

    Hello All,
    I really need urgent help , as I am in really big problem. Today I applied patches , the last patch I applied was 120012-14.
    After this I rebooted Solaris and it is not coming up now. It is giving me following error, it reboots again and again
    nel/misc/sparcv9/hook: undefined symbol 'netstack_unregister'
    WARNING: mod_load: cannot load module 'hook'
    /kernel/misc/sparcv9/hook: undefined symbol 'netstack_register'
    /kernel/misc/sparcv9/hook: undefined symbol 'netstack_unregister'
    WARNING: mod_load: cannot load module 'hook'
    /kernel/misc/sparcv9/neti: undefined symbol 'netstack_register'
    /kernel/misc/sparcv9/neti: undefined symbol 'hook_event_remove'
    /kernel/misc/sparcv9/neti: undefined symbol 'hook_register'
    /kernel/misc/sparcv9/neti: undefined symbol 'netstack_unregister'
    /kernel/misc/sparcv9/neti: undefined symbol 'hook_family_add'
    /kernel/misc/sparcv9/neti: undefined symbol 'hook_family_remove'
    /kernel/misc/sparcv9/neti: undefined symbol 'hook_unregister'
    /kernel/misc/sparcv9/neti: undefined symbol 'netstack_find_by_stackid'
    /kernel/misc/sparcv9/neti: undefined symbol 'hook_event_add'
    /kernel/misc/sparcv9/neti: undefined symbol 'netstack_rele'
    WARNING: mod_load: cannot load module 'neti'
    WARNING: neti: unable to resolve dependency, module 'misc/hook' not found
    /kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_zoneid'
    /kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_event'
    /kernel/drv/sparcv9/ip: undefined symbol 'netstack_register'
    /kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip_config'
    /kernel/drv/sparcv9/ip: undefined symbol 'net_register_impl'
    /kernel/drv/sparcv9/ip: undefined symbol 'kstat_delete_netstack'
    /kernel/drv/sparcv9/ip: undefined symbol 'netstack_unregister'
    /kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip'
    /kernel/drv/sparcv9/ip: undefined symbol 'hook_run'
    /kernel/drv/sparcv9/ip: undefined symbol 'net_unregister'
    /kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_cred'
    /kernel/drv/sparcv9/ip: undefined symbol 'netstackid_to_zoneid'
    /kernel/drv/sparcv9/ip: undefined symbol 'net_register_event'
    /kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_family'
    /kernel/drv/sparcv9/ip: undefined symbol 'kstat_create_netstack'
    /kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_stackid'
    /kernel/drv/sparcv9/ip: undefined symbol 'netstack_rele'
    /kernel/drv/sparcv9/ip: undefined symbol 'netstack_hold'
    /kernel/drv/sparcv9/ip: undefined symbol 'netstack_next'
    /kernel/drv/sparcv9/ip: undefined symbol 'net_register_family'
    /kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_init'
    /kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_fini'
    WARNING: mod_load: cannot load module 'ip'
    WARNING: neti: unable to resolve dependency, module 'misc/hook' not found
    /kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_zoneid'
    /kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_event'
    /kernel/drv/sparcv9/ip: undefined symbol 'netstack_register'
    /kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip_config'
    /kernel/drv/sparcv9/ip: undefined symbol 'net_register_impl'
    /kernel/drv/sparcv9/ip: undefined symbol 'kstat_delete_netstack'
    /kernel/drv/sparcv9/ip: undefined symbol 'netstack_unregister'
    /kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip'
    /kernel/drv/sparcv9/ip: undefined symbol 'hook_run'
    /kernel/drv/sparcv9/ip: undefined symbol 'net_unregister'
    /kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_cred'
    /kernel/drv/sparcv9/ip: undefined symbol 'netstackid_to_zoneid'
    /kernel/drv/sparcv9/ip: undefined symbol 'net_register_event'
    /kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_family'
    /kernel/drv/sparcv9/ip: undefined symbol 'kstat_create_netstack'
    /kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_stackid'
    /kernel/drv/sparcv9/ip: undefined symbol 'netstack_rele'
    /kernel/drv/sparcv9/ip: undefined symbol 'netstack_hold'
    /kernel/drv/sparcv9/ip: undefined symbol 'netstack_next'
    /kernel/drv/sparcv9/ip: undefined symbol 'net_register_family'
    /kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_init'
    /kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_fini'
    WARNING: mod_load: cannot load module 'ip'
    WARNING: ip: unable to resolve dependency, module 'misc/hook' not found
    strplumb: can't install module drv/ip, err -1
    /kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'cons_tem_disable'
    /kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_inverses'
    /kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'consmode'
    /kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_hide_cursor'
    /kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_pos'
    /kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_term_font_size'
    /kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_size'
    WARNING: mod_load: cannot load module 'consconfig_dacf'
    /kernel/misc/sparcv9/consconfig: undefined symbol 'dynamic_console_config'
    WARNING: mod_load: cannot load module 'consconfig'
    WARNING: consconfig: unable to resolve dependency, module 'dacf/consconfig_dacf' not found
    panic[cpu3]/thread=180e000: mod_hold_stub: Couldn't load stub module misc/consconfig
    000000000180b890 genunix:mod_hold_stub+1f0 (0, 185fc00, 18acbf8, 60002cff370, 1817328, 0)
    %l0-3: 0000000001843b18 0000060003308000 0000000001811ce8 0000000000000000
    %l4-7: 0000000000000000 0000000000000064 ffffffffffffffff 0000000000000000
    000000000180b940 unix:stubs_common_code+30 (1f037ce7fb0, e164, 64000000, 0, 1ef800, 0)
    %l0-3: 000000000180b209 000000000180b2e1 000000337e000000 0000000000000001
    %l4-7: 0000000000000000 0000000001817338 0000000000000000 0000060002ccf6c0
    000000000180ba10 genunix:main+134 (18ad050, 18a8c00, 1836500, 1861800, 183b400, 1814000)
    %l0-3: 0000000070002000 0000000000000001 0000000000000000 0000000000000002
    %l4-7: 00000000018b0280 00000000018b0000 00000000018ad060 00000000018ad000
    syncing file systems... done
    skipping system dump - no dump device configured
    rebooting...
    Please help me what should I do. I have gone through all forums and mailing lists but couldnt find pin point solution.
    Thanks,
    Farhan
    Edited by: rozzx on Jul 5, 2008 1:48 AM

    Solve this. Patch just screwed the meta devices, changed vfstab in single user mod and it booted fine.

  • Unknown event applying patch 120011-14

    When applying patch 120011-14, I have been getting the following message for the last 2-3 hours
    /pci@780/pci@0/pci@9/scsi@0 (mpt0):
    mpt0: unknown event e received
    Is this a cause for concern? Should I let the update continue? Is there something else I should do?
    I used the following on the hyperterminal console of a T2000 running Solaris 10 11/06:
    # init S
    # smpatch update -i 120011-14
    Thanks
    Manish

    I believe the issue you are seeing is where the mpt driver patch is either missing or down rev.
    The latest mpt driver patch is:
    127127-11 (Sparc)
    and
    127128-11 (x86)
    Please apply the appropriate patch to prevent the errors you are seeing.

  • Bundle Patch1 is now available for Solaris (SPARC), Solaris (x86-64), AIX

    [OTN |http://www.oracle.com/technetwork/oem/enterprise-manager/downloads/index.html?origref=http://www.oracle.com/technetwork/oem/grid-control/index.html] Hi All,
    EM Binaries updated with bundle patch1 are now available on OTN
    OMS and Management Agents for platform ::: Solaris (SPARC), Solaris (x86-64), and IBM AIX (64-bit)
    Management Agents for platform::: HP-UX, or HP-UX Itanium
    The BP1 workbook is updated with various use-cases specific to these platform. We strongly recommend you to follow the instruction from the workbook to apply BP1 patches. If you have any doubts feel free to drop me an email.
    http://docs.oracle.com/cd/E24628_01/doc.121/e35229/toc.htm
    Regards
    Akanksha

    Oracle Instant Client was a "feature" introduced with Oracle 10g. There is no 9i version.
    Code that links with Oracle 9i libraries should be able to be linked with Instant Client 10gR2.
    The resulting application will be able to connect to databases from Oracle 8.1 onwards.

  • Tload for Solaris X86

    I have a sun Storedge L9 hooked up to a Solaris X86 system and need to update the firmware and moving the loader to a sparc systems isn't feasible at the moment. Is there a Solaris X86 version of tload available
    i.e. I want to apply the firmware updates in 112141-03, using Solaris X86
    Thanks for any help.

    Nevermind i found one in a newer patch for a different drive.

  • ASE for Solaris x86

    I really need a developers edition of ASE for Solaris x86. The current versions that are available are only for Linux or Windows. Is there anywhere I can get the Solaris x86 version??

    You haven't mentioned which ASE version you're looking for so I'm going to assume a newer/recent version of ASE 15.7 is sufficient ...
    For quite awhile now all ASE downloads (IR, GA, EBF, SPxxx) have contained the entire code line (ie, you don't have to find a GA release and then apply a smaller/delta ebf patch file to get the latest version).
    If you've got access to the EBF downloads @ sybase.com you should be able to download a recent copy of ASE 15.7 for Solaris/x86.  During installation just pick the developer license version (the install will generate a generic *lic file for the developers version).
    While there may be a way to download the file from the SAP website(s), I wouldn't have a clue since a) the SAP websites are poorly-designed/confusing and b) SAP is clamping down pretty hard on what Sybase related downloads are available and to whom.

  • Mounting a Solaris x86 CD/DVD from a remote Windows CD/DVD-ROM drive

    Greetings, all.
    Is it possible to mount a remote Windows CD/DVD-ROM drive? I have the Solaris 10x86 Companion Software DVD sitting in a CD/DVD-ROM drive that's installed on a Windows server on my network. It is shared-out (F:) and the two servers can ping each other. I've also confirmed the NFS services/daemons are running on the Solaris x86 machine. I've tried the following variations but, all have failed to produce successful results:
    # mount -F nfs x.x.x.x:/f /mnt
    nfs mount: x.x.x.x: : RPC: Program not registered
    nfs mount: retrying: /mnt
    # mount -F hsfs x.x.x.x:/f /mnt
    mount: No such device
    mount: cannot mount x.x.x.x:/f
    # mount -F hsfs x.x.x.x:/F /mnt
    mount: No such device
    mount: cannot mount x.x.x.x:/F
    [FYI: S10_106_SOFTWARE is the DVD's label as reported by Windows Explorer.]
    # mount -F hsfs x.x.x.x:/S10_106_SOFTWARE /mnt
    mount: No such device
    mount: cannot mount x.x.x.x:/S10_106_SOFTWARE
    # mount -F hsfs x.x.x.x:/s10_106_software /mnt
    mount: No such device
    mount: cannot mount x.x.x.x:/s10_106_software
    # mount -F nfs x.x.x.x:/S10_106_SOFTWARE /mnt
    nfs mount: x.x.x.x: : RPC: Program not registered
    nfs mount: retrying: /mnt
    # mount -F nfs x.x.x.x:/s10_106_software /mnt
    nfs mount: x.x.x.x: : RPC: Program not registered
    nfs mount: retrying: /mnt
    # mount -F hsfs x.x.x.x:/f/s10_106_software /mnt
    mount: No such device
    mount: cannot mount x.x.x.x:/f/s10_106_software
    # mount -F hsfs x.x.x.x:/F/s10_106_software /mnt
    mount: No such device
    mount: cannot mount x.x.x.x:/F/s10_106_software
    # mount -F hsfs x.x.x.x:/f/S10_106_SOFTWARE /mnt
    mount: No such device
    mount: cannot mount x.x.x.x:/f/S10_106_SOFTWARE
    # mount -F hsfs x.x.x.x:/F/S10_106_SOFTWARE /mnt
    mount: No such device
    mount: cannot mount x.x.x.x:/F/S10_106_SOFTWARE
    I've also tried mounting it at bootup by adding the appropriate entry in the /etc/vfstab file but, this does not work as well. I've tried Google'ing for an answer to my issue but, I haven't been able to find anything that applies directly to what I'm reporting. It's usually chatter about mounting from one UNIX server to another. Any advice from the community would be greatly appreciated.

    After three weeks, you deserve a reply. Windoze does
    not natively support NFS.Also deserves a decent answer...
    There are two ways to do this:
    Install Microsoft's free "Windows Services for UNIX," which includes a Windows NFS server; or
    Install the 'sharity' package (google for it); it provides Solaris systems the ability to mount Windows shares

  • Applying patch set update11.2.0.3.7 on 11.2.0.3.0

    Dear DBA's,
    Database = 11.2.0.3.0
    Operating System : Solaris 11 sparc 64.
    applying PSU patch : 16619892
    I am trying to apply patch 16619892 on 11.2.0.3.0 to upgrade it to 11.2.0.3.7.
    I hope this is a straight forword stuff i beleive, but i am getting the following errors and log details.
    Please advice the action?
    $ cd /noracle/patch/16619892/
    xxxx@xxxx$ /noracle/home/oracle/product/11.2.0.3/OPatch/opatch apply
    Oracle Interim Patch Installer version 11.2.0.3.4
    Copyright (c) 2012, Oracle Corporation.  All rights reserved.
    Oracle Home       : /noracle/home/oracle/product/11.2.0.3
    Central Inventory : /noracle/home/oracle/oraInventory
       from           : /noracle/home/oracle/product/11.2.0.3/oraInst.loc
    OPatch version    : 11.2.0.3.4
    OUI version       : 11.2.0.3.0
    Log file location : /noracle/home/oracle/product/11.2.0.3/cfgtoollogs/opatch/opatch2013-08-18_12-26-10PM_1.log
    Verifying environment and performing prerequisite checks...
    Prerequisite check "CheckActiveFilesAndExecutables" failed.
    The details are:
    Following executables are active :
    /noracle/home/oracle/product/11.2.0.3/bin/tnslsnr
    Prerequisite check "CheckActiveFilesAndExecutables" failed.
    The details are:
    Following executables are active :
    /noracle/home/oracle/product/11.2.0.3/lib/libclntsh.so.11.1
    UtilSession failed: Prerequisite check "CheckActiveFilesAndExecutables" failed.Prerequisite check "CheckActiveFilesAndExecutables" failed.
    Log file location: /noracle/home/oracle/product/11.2.0.3/cfgtoollogs/opatch/opatch2013-08-18_12-26-10PM_1.log
    OPatch failed with error code 73
    xxxx@xxxx$ /noracle/home/oracle/product/11.2.0.3/OPatch/opatch prereq CheckConflictAgainstOHWithDetail -ph ./16619892
    Oracle Interim Patch Installer version 11.2.0.3.4
    Copyright (c) 2012, Oracle Corporation.  All rights reserved.
    PREREQ session
    Oracle Home       : /noracle/home/oracle/product/11.2.0.3
    Central Inventory : /noracle/home/oracle/oraInventory
       from           : /noracle/home/oracle/product/11.2.0.3/oraInst.loc
    OPatch version    : 11.2.0.3.4
    OUI version       : 11.2.0.3.0
    Log file location : /noracle/home/oracle/product/11.2.0.3/cfgtoollogs/opatch/opatch2013-08-18_12-26-41PM_1.log
    Invoking prereq "checkconflictagainstohwithdetail"
    Prereq "checkConflictAgainstOHWithDetail" passed.
    OPatch succeeded.
    xxxx@xxxx$ /noracle/home/oracle/product/11.2.0.3/OPatch/opatch prereq CheckConflictAgainstOHWithDetail -ph ./       
    Oracle Interim Patch Installer version 11.2.0.3.4
    Copyright (c) 2012, Oracle Corporation.  All rights reserved.
    PREREQ session
    Oracle Home       : /noracle/home/oracle/product/11.2.0.3
    Central Inventory : /noracle/home/oracle/oraInventory
       from           : /noracle/home/oracle/product/11.2.0.3/oraInst.loc
    OPatch version    : 11.2.0.3.4
    OUI version       : 11.2.0.3.0
    Log file location : /noracle/home/oracle/product/11.2.0.3/cfgtoollogs/opatch/opatch2013-08-18_12-26-48PM_1.log
    Invoking prereq "checkconflictagainstohwithdetail"
    Prereq "checkConflictAgainstOHWithDetail" passed.
    OPatch succeeded.
    xxxx@xxxx$ more /noracle/home/oracle/product/11.2.0.3/cfgtoollogs/opatch/opatch2013-08-18_12-26-10PM_1.log
    [Aug 18, 2013 12:26:10 PM]   OPatch invoked as follows: 'apply -invPtrLoc /noracle/home/oracle/product/11.2.0.3/oraInst.loc '
    [Aug 18, 2013 12:26:10 PM]   OUI-67077:
                                 Oracle Home       : /noracle/home/oracle/product/11.2.0.3
                                 Central Inventory : /noracle/home/oracle/oraInventory
                                    from           : /noracle/home/oracle/product/11.2.0.3/oraInst.loc
                                 OPatch version    : 11.2.0.3.4
                                 OUI version       : 11.2.0.3.0
                                 OUI location      : /noracle/home/oracle/product/11.2.0.3/oui
                                 Log file location : /noracle/home/oracle/product/11.2.0.3/cfgtoollogs/opatch/opatch2013-08-18_12-26-10PM_1.log
    [Aug 18, 2013 12:26:10 PM]   Patch history file: /noracle/home/oracle/product/11.2.0.3/cfgtoollogs/opatch/opatch_history.txt
    [Aug 18, 2013 12:26:13 PM]   Verifying environment and performing prerequisite checks...
    [Aug 18, 2013 12:26:13 PM]   Ignoring file "/noracle/patch/16619892/README.html" in the patch directory.
    [Aug 18, 2013 12:26:13 PM]   Ignoring file "/noracle/patch/16619892/README.txt" in the patch directory.
    [Aug 18, 2013 12:26:13 PM]   Ignoring file "/noracle/patch/16619892/patchmd.xml" in the patch directory.
    [Aug 18, 2013 12:26:14 PM]   Checking conflict among patches...
    [Aug 18, 2013 12:26:14 PM]   Patch ID  16619892
    [Aug 18, 2013 12:26:14 PM]   Patches that conflict: [  ]
    [Aug 18, 2013 12:26:14 PM]   Checking conflicts for patch : 16619892
    [Aug 18, 2013 12:26:14 PM]   Checking if Oracle Home has components required by patches...
    [Aug 18, 2013 12:26:14 PM]   Check if patch "13343438"  is a no-op patch.
    [Aug 18, 2013 12:26:14 PM]   Check if patch "13696216"  is a no-op patch.
    [Aug 18, 2013 12:26:14 PM]   Check if patch "13923374"  is a no-op patch.
    [Aug 18, 2013 12:26:14 PM]   Opt. comp. not in OH inventory: oracle.network.cman, 11.2.0.3.0
    [Aug 18, 2013 12:26:14 PM]   [ oracle.network.cman, 11.2.0.3.0 ]
    [Aug 18, 2013 12:26:14 PM]   Check if patch "14275605"  is a no-op patch.
    [Aug 18, 2013 12:26:14 PM]   Opt. comp. not in OH inventory: oracle.precomp.lang, 11.2.0.3.0
    [Aug 18, 2013 12:26:14 PM]   [ oracle.precomp.lang, 11.2.0.3.0 ]
    [Aug 18, 2013 12:26:14 PM]   Check if patch "14727310"  is a no-op patch.
    [Aug 18, 2013 12:26:14 PM]   Check if patch "16056266"  is a no-op patch.
    [Aug 18, 2013 12:26:14 PM]   Opt. comp. not in OH inventory: oracle.network.cman, 11.2.0.3.0
    [Aug 18, 2013 12:26:14 PM]   [ oracle.network.cman, 11.2.0.3.0 ]
    [Aug 18, 2013 12:26:14 PM]   Check if patch "16619892"  is a no-op patch.
    [Aug 18, 2013 12:26:14 PM]   Opt. comp. not in OH inventory: oracle.precomp.lang, 11.2.0.3.0
    [Aug 18, 2013 12:26:14 PM]   [ oracle.precomp.lang, 11.2.0.3.0 ]
    [Aug 18, 2013 12:26:14 PM]   Running prerequisite checks...
    [Aug 18, 2013 12:26:14 PM]   Patch "13343438" is ignored as it is not a "Fusion Applications patch".
    [Aug 18, 2013 12:26:14 PM]   Patch "13696216" is ignored as it is not a "Fusion Applications patch".
    [Aug 18, 2013 12:26:14 PM]   Patch "13923374" is ignored as it is not a "Fusion Applications patch".
    [Aug 18, 2013 12:26:14 PM]   Patch "14275605" is ignored as it is not a "Fusion Applications patch".
    [Aug 18, 2013 12:26:14 PM]   Patch "14727310" is ignored as it is not a "Fusion Applications patch".
    [Aug 18, 2013 12:26:14 PM]   Patch "16056266" is ignored as it is not a "Fusion Applications patch".
    [Aug 18, 2013 12:26:14 PM]   Patch "16619892" is ignored as it is not a "Fusion Applications patch".
    [Aug 18, 2013 12:26:14 PM]   Check if patch "13343438"  is a no-op patch.
    [Aug 18, 2013 12:26:14 PM]   Check if patch "13696216"  is a no-op patch.
    [Aug 18, 2013 12:26:14 PM]   Check if patch "13923374"  is a no-op patch.
    [Aug 18, 2013 12:26:14 PM]   Opt. comp. not in OH inventory: oracle.network.cman, 11.2.0.3.0
    [Aug 18, 2013 12:26:14 PM]   [ oracle.network.cman, 11.2.0.3.0 ]
    [Aug 18, 2013 12:26:14 PM]   Check if patch "14275605"  is a no-op patch.
    [Aug 18, 2013 12:26:14 PM]   Opt. comp. not in OH inventory: oracle.precomp.lang, 11.2.0.3.0
    [Aug 18, 2013 12:26:14 PM]   [ oracle.precomp.lang, 11.2.0.3.0 ]
    [Aug 18, 2013 12:26:14 PM]   Check if patch "14727310"  is a no-op patch.
    [Aug 18, 2013 12:26:14 PM]   Check if patch "16056266"  is a no-op patch.
    [Aug 18, 2013 12:26:14 PM]   Opt. comp. not in OH inventory: oracle.network.cman, 11.2.0.3.0
    [Aug 18, 2013 12:26:14 PM]   [ oracle.network.cman, 11.2.0.3.0 ]
    [Aug 18, 2013 12:26:14 PM]   Check if patch "16619892"  is a no-op patch.
    [Aug 18, 2013 12:26:14 PM]   Opt. comp. not in OH inventory: oracle.precomp.lang, 11.2.0.3.0
    [Aug 18, 2013 12:26:14 PM]   [ oracle.precomp.lang, 11.2.0.3.0 ]
    [Aug 18, 2013 12:26:14 PM]   None of the selected patches are no-op. patches..
    [Aug 18, 2013 12:26:14 PM]   Space Needed : 880.924MB
    [Aug 18, 2013 12:26:15 PM]   Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 13343438
    [Aug 18, 2013 12:26:15 PM]   Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 13696216
    [Aug 18, 2013 12:26:15 PM]   Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 13923374
    [Aug 18, 2013 12:26:15 PM]   Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 14275605
    [Aug 18, 2013 12:26:15 PM]   Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 14727310
    [Aug 18, 2013 12:26:15 PM]   Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 16056266
    [Aug 18, 2013 12:26:15 PM]   Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 16619892
    [Aug 18, 2013 12:26:16 PM]   Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/oracle at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/oracle at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/asmcmdcore at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/asmcmdcore at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/renamedg at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/renamedg at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/nid at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/nid at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/tnslsnr at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/tnslsnr at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Following executables are active :
                                 /noracle/home/oracle/product/11.2.0.3/bin/tnslsnr
    [Aug 18, 2013 12:26:16 PM]   Prerequisite check "CheckActiveFilesAndExecutables" failed.
                                 The details are:
                                 Following executables are active :
                                 /noracle/home/oracle/product/11.2.0.3/bin/tnslsnr
    [Aug 18, 2013 12:26:16 PM]   Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/proc at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/proc at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/rman at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/rman at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/wrap at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/wrap at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/plshprof at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/plshprof at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/lib/libclntsh.so.11.1 at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/lib/libclntsh.so.11.1 at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Following executables are active :
                                 /noracle/home/oracle/product/11.2.0.3/lib/libclntsh.so.11.1
    [Aug 18, 2013 12:26:16 PM]   Prerequisite check "CheckActiveFilesAndExecutables" failed.
                                 The details are:
                                 Following executables are active :
                                 /noracle/home/oracle/product/11.2.0.3/lib/libclntsh.so.11.1
    [Aug 18, 2013 12:26:16 PM]   Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/amdu at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/amdu at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/kfed at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/kfed at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   OUI-67073:UtilSession failed: Prerequisite check "CheckActiveFilesAndExecutables" failed.Prerequisite check "CheckActiveFilesAndExecutables" failed.
    [Aug 18, 2013 12:26:16 PM]   Finishing UtilSession at Sun Aug 18 12:26:16 GMT+04:00 2013
    [Aug 18, 2013 12:26:16 PM]   Log file location: /noracle/home/oracle/product/11.2.0.3/cfgtoollogs/opatch/opatch2013-08-18_12-26-10PM_1.log
    [Aug 18, 2013 12:26:16 PM]   Stack Description: java.lang.RuntimeException: Prerequisite check "CheckActiveFilesAndExecutables" failed.Prerequisite check "CheckActiveFilesAndExecutables" failed.
    [Aug 18, 2013 12:26:16 PM]   StackTrace: oracle.opatch.OPatchSessionHelper.runApplyPrereqs(OPatchSessionHelper.java:6420)
    [Aug 18, 2013 12:26:16 PM]   StackTrace: oracle.opatch.opatchutil.NApply.process(NApply.java:1587)
    [Aug 18, 2013 12:26:16 PM]   StackTrace: oracle.opatch.opatchutil.OUSession.napply(OUSession.java:1136)
    [Aug 18, 2013 12:26:16 PM]   StackTrace: sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    [Aug 18, 2013 12:26:16 PM]   StackTrace: sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    [Aug 18, 2013 12:26:16 PM]   StackTrace: sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    [Aug 18, 2013 12:26:16 PM]   StackTrace: java.lang.reflect.Method.invoke(Method.java:592)
    [Aug 18, 2013 12:26:16 PM]   StackTrace: oracle.opatch.UtilSession.process(UtilSession.java:322)
    [Aug 18, 2013 12:26:16 PM]   StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:2346)
    [Aug 18, 2013 12:26:16 PM]   StackTrace: oracle.opatch.OPatch.main(OPatch.java:613)
    xxxx@xxxx$ 
    Regards,
    SG

    Dear Srini,
    I forgot to down the listener.
    please check the bellow output.
    xxxx@xxxx$ more /noracle/home/oracle/product/11.2.0.3/cfgtoollogs/opatch/opatch2013-08-18_14-46-58PM_1.log
    [Aug 18, 2013 2:46:58 PM]    OPatch invoked as follows: 'apply -invPtrLoc /noracle/home/oracle/product/11.2.0.3/oraInst.loc '
    [Aug 18, 2013 2:46:58 PM]    OUI-67077:
                                 Oracle Home       : /noracle/home/oracle/product/11.2.0.3
                                 Central Inventory : /noracle/home/oracle/oraInventory
                                    from           : /noracle/home/oracle/product/11.2.0.3/oraInst.loc
                                 OPatch version    : 11.2.0.3.4
                                 OUI version       : 11.2.0.3.0
                                 OUI location      : /noracle/home/oracle/product/11.2.0.3/oui
                                 Log file location : /noracle/home/oracle/product/11.2.0.3/cfgtoollogs/opatch/opatch2013-08-18_14-46-58PM_1.log
    [Aug 18, 2013 2:46:58 PM]    Patch history file: /noracle/home/oracle/product/11.2.0.3/cfgtoollogs/opatch/opatch_history.txt
    [Aug 18, 2013 2:47:01 PM]    Verifying environment and performing prerequisite checks...
    [Aug 18, 2013 2:47:01 PM]    Ignoring file "/noracle/patch/16619892/README.html" in the patch directory.
    [Aug 18, 2013 2:47:01 PM]    Ignoring file "/noracle/patch/16619892/README.txt" in the patch directory.
    [Aug 18, 2013 2:47:01 PM]    Ignoring file "/noracle/patch/16619892/patchmd.xml" in the patch directory.
    [Aug 18, 2013 2:47:02 PM]    Checking conflict among patches...
    [Aug 18, 2013 2:47:02 PM]    Patch ID  16619892
    [Aug 18, 2013 2:47:02 PM]    Patches that conflict: [  ]
    [Aug 18, 2013 2:47:02 PM]    Checking conflicts for patch : 16619892
    [Aug 18, 2013 2:47:02 PM]    Checking if Oracle Home has components required by patches...
    [Aug 18, 2013 2:47:02 PM]    Check if patch "13343438"  is a no-op patch.
    [Aug 18, 2013 2:47:02 PM]    Check if patch "13696216"  is a no-op patch.
    [Aug 18, 2013 2:47:02 PM]    Check if patch "13923374"  is a no-op patch.
    [Aug 18, 2013 2:47:02 PM]    Opt. comp. not in OH inventory: oracle.network.cman, 11.2.0.3.0
    [Aug 18, 2013 2:47:02 PM]    [ oracle.network.cman, 11.2.0.3.0 ]
    [Aug 18, 2013 2:47:02 PM]    Check if patch "14275605"  is a no-op patch.
    [Aug 18, 2013 2:47:02 PM]    Opt. comp. not in OH inventory: oracle.precomp.lang, 11.2.0.3.0
    [Aug 18, 2013 2:47:02 PM]    [ oracle.precomp.lang, 11.2.0.3.0 ]
    [Aug 18, 2013 2:47:02 PM]    Check if patch "14727310"  is a no-op patch.
    [Aug 18, 2013 2:47:02 PM]    Check if patch "16056266"  is a no-op patch.
    [Aug 18, 2013 2:47:02 PM]    Opt. comp. not in OH inventory: oracle.network.cman, 11.2.0.3.0
    [Aug 18, 2013 2:47:02 PM]    [ oracle.network.cman, 11.2.0.3.0 ]
    [Aug 18, 2013 2:47:02 PM]    Check if patch "16619892"  is a no-op patch.
    [Aug 18, 2013 2:47:02 PM]    Opt. comp. not in OH inventory: oracle.precomp.lang, 11.2.0.3.0
    [Aug 18, 2013 2:47:02 PM]    [ oracle.precomp.lang, 11.2.0.3.0 ]
    [Aug 18, 2013 2:47:02 PM]    Running prerequisite checks...
    [Aug 18, 2013 2:47:02 PM]    Patch "13343438" is ignored as it is not a "Fusion Applications patch".
    [Aug 18, 2013 2:47:02 PM]    Patch "13696216" is ignored as it is not a "Fusion Applications patch".
    [Aug 18, 2013 2:47:02 PM]    Patch "13923374" is ignored as it is not a "Fusion Applications patch".
    [Aug 18, 2013 2:47:02 PM]    Patch "14275605" is ignored as it is not a "Fusion Applications patch".
    [Aug 18, 2013 2:47:02 PM]    Patch "14727310" is ignored as it is not a "Fusion Applications patch".
    [Aug 18, 2013 2:47:02 PM]    Patch "16056266" is ignored as it is not a "Fusion Applications patch".
    [Aug 18, 2013 2:47:02 PM]    Patch "16619892" is ignored as it is not a "Fusion Applications patch".
    [Aug 18, 2013 2:47:02 PM]    Check if patch "13343438"  is a no-op patch.
    [Aug 18, 2013 2:47:02 PM]    Check if patch "13696216"  is a no-op patch.
    [Aug 18, 2013 2:47:02 PM]    Check if patch "13923374"  is a no-op patch.
    [Aug 18, 2013 2:47:02 PM]    Opt. comp. not in OH inventory: oracle.network.cman, 11.2.0.3.0
    [Aug 18, 2013 2:47:02 PM]    [ oracle.network.cman, 11.2.0.3.0 ]
    [Aug 18, 2013 2:47:02 PM]    Check if patch "14275605"  is a no-op patch.
    [Aug 18, 2013 2:47:02 PM]    Opt. comp. not in OH inventory: oracle.precomp.lang, 11.2.0.3.0
    [Aug 18, 2013 2:47:02 PM]    [ oracle.precomp.lang, 11.2.0.3.0 ]
    [Aug 18, 2013 2:47:02 PM]    Check if patch "14727310"  is a no-op patch.
    [Aug 18, 2013 2:47:02 PM]    Check if patch "16056266"  is a no-op patch.
    [Aug 18, 2013 2:47:02 PM]    Opt. comp. not in OH inventory: oracle.network.cman, 11.2.0.3.0
    [Aug 18, 2013 2:47:02 PM]    [ oracle.network.cman, 11.2.0.3.0 ]
    [Aug 18, 2013 2:47:02 PM]    Check if patch "16619892"  is a no-op patch.
    [Aug 18, 2013 2:47:02 PM]    Opt. comp. not in OH inventory: oracle.precomp.lang, 11.2.0.3.0
    [Aug 18, 2013 2:47:02 PM]    [ oracle.precomp.lang, 11.2.0.3.0 ]
    [Aug 18, 2013 2:47:02 PM]    None of the selected patches are no-op. patches..
    [Aug 18, 2013 2:47:02 PM]    Space Needed : 880.924MB
    [Aug 18, 2013 2:47:02 PM]    Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 13343438
    [Aug 18, 2013 2:47:02 PM]    Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 13696216
    [Aug 18, 2013 2:47:02 PM]    Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 13923374
    [Aug 18, 2013 2:47:02 PM]    Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 14275605
    [Aug 18, 2013 2:47:03 PM]    Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 14727310
    [Aug 18, 2013 2:47:03 PM]    Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 16056266
    [Aug 18, 2013 2:47:03 PM]    Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 16619892
    [Aug 18, 2013 2:47:03 PM]    Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/oracle at Sun Aug 18 14:47:03 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/oracle at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/asmcmdcore at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/asmcmdcore at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/renamedg at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/renamedg at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/nid at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/nid at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/tnslsnr at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/tnslsnr at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/proc at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/proc at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/rman at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/rman at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/wrap at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/wrap at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/plshprof at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/plshprof at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/lib/libclntsh.so.11.1 at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/lib/libclntsh.so.11.1 at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Following executables are active :
                                 /noracle/home/oracle/product/11.2.0.3/lib/libclntsh.so.11.1
    [Aug 18, 2013 2:47:04 PM]    Prerequisite check "CheckActiveFilesAndExecutables" failed.
                                 The details are:
                                 Following executables are active :
                                 /noracle/home/oracle/product/11.2.0.3/lib/libclntsh.so.11.1
    [Aug 18, 2013 2:47:04 PM]    Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/amdu at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/amdu at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Start fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/kfed at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Finish fuser command /sbin/fuser /noracle/home/oracle/product/11.2.0.3/bin/kfed at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    OUI-67073:UtilSession failed: Prerequisite check "CheckActiveFilesAndExecutables" failed.
    [Aug 18, 2013 2:47:04 PM]    Finishing UtilSession at Sun Aug 18 14:47:04 GMT+04:00 2013
    [Aug 18, 2013 2:47:04 PM]    Log file location: /noracle/home/oracle/product/11.2.0.3/cfgtoollogs/opatch/opatch2013-08-18_14-46-58PM_1.log
    [Aug 18, 2013 2:47:04 PM]    Stack Description: java.lang.RuntimeException: Prerequisite check "CheckActiveFilesAndExecutables" failed.
    [Aug 18, 2013 2:47:04 PM]    StackTrace: oracle.opatch.OPatchSessionHelper.runApplyPrereqs(OPatchSessionHelper.java:6420)
    [Aug 18, 2013 2:47:04 PM]    StackTrace: oracle.opatch.opatchutil.NApply.process(NApply.java:1587)
    [Aug 18, 2013 2:47:04 PM]    StackTrace: oracle.opatch.opatchutil.OUSession.napply(OUSession.java:1136)
    [Aug 18, 2013 2:47:04 PM]    StackTrace: sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    [Aug 18, 2013 2:47:04 PM]    StackTrace: sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    [Aug 18, 2013 2:47:04 PM]    StackTrace: sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    [Aug 18, 2013 2:47:04 PM]    StackTrace: java.lang.reflect.Method.invoke(Method.java:592)
    [Aug 18, 2013 2:47:04 PM]    StackTrace: oracle.opatch.UtilSession.process(UtilSession.java:322)
    [Aug 18, 2013 2:47:04 PM]    StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:2346)
    [Aug 18, 2013 2:47:04 PM]    StackTrace: oracle.opatch.OPatch.main(OPatch.java:613)

  • Not applied Patch 5117016 after 10.2.0.2 patch set.

    Hi ,
    database has been upgraded to 10gR2 on solaris 64bit. Patch 5117016 has not been applied after 10.2.0.2 patch set applied. but after that DST patches were applied. here my concern is should i rollback DST patches in order to apply Patch 5117016. as per metalink note:394933.1
    please advise me.
    thanks in advance,
    Hussain.

    Hi,
    I have got problem when I was installing 10.2.0.3.0 Patch Set after succeed installation of Oracle 10.2.0.1 on Windows server 2003.
    Server was shut down by a coworker middle of installation of 10.2.0.3.0 Patch Set resulting that Patch 5556081 : was not applied ( see below opatch_history.txt ) .
    When I try to apply 10.2.0.3.0 again it fails saying that Patch Set is already installed.
    When I run OUI to see what has been installed I see only Interim Patch #5557962.
    I didn't create any database between the installations.
    So I can't apply OpachSet README.html advice .
    Uninstall PathSet :
    C:\> sqlplus /NOLOG
    SQL> CONNECT SYS/SYS_Password AS SYSDBA
    SQL> SHUTDOWN IMMEDIATE
    SQL> EXIT
    Should I try to Create a Database and after that apply OpachSet README.html advice
    C:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch_history.txt
    Date & Time : Fri Aug 31 10:56:03 CEST 2007
    Oracle Home : C:\oracle\product\10.2.0\db_1
    OPatch Ver. : 10.2.0.3.0
    Current Dir : C:\oracle\product\10.2.0\db_1\sysman\patches
    Command : apply -silent -local -oh C:\oracle\product\10.2.0\db_1 C:\oracle\product\10.2.0\db_1/sysman/patches/5557962
    Log File : C:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch2007-08-31_10-56-03AM.log
    /regards

  • Apply Patch in EBS R.12.1.1

    Hello All,
    I have some issues in applying application patch. my ebs version is R.12.1.1 Linux x86 and patches will be apply are *9055234*, *9366099*, and *10364346*.
    I follow steps to apply patch from Hussein Sawwan. but I face some problem.
    Steps to apply a patch:
    - Stop all application services (keep the database and the database listener up and running)
    - Download the patch from Metalink
    - Copy the patch file to any directory (i.e. /u04/patches) --- if there is not any patch directory so I should be create a new patch directory below $/u0/. is't true?
    - As 'applmgr' do the following:
    - Source the environment file --- I found 2 file .env are APPSVIS_oradev.env and VIS_oradev.env in /u0/oracle/VIS/apps/apps_st/appl/ which one is true?
    - $ cd /u04/patches
    - Type 'unzip <patch_number>.zip' --- pacth file which has been downloaded are *.xml* type not *.zip* type. so what should I do?
    - cd <patch_number>
    - Type 'adpatch'
    - When it prompts you to enter the patch driver, type 'u<patch_number>.drv' --- where I found patch driver? is patch driver including in path file?
    Any suggestion please?? All answrers will be helpful..
    Regards,
    Ade Hilman

    I follow steps to apply patch from Hussein Sawwan. but I face some problem.What is the issue?
    Thanks,
    Hussein

  • Core 2 Duo and solaris x86 11/06 works for me

    This is FYI, since I seen (and posted) problems, but I haven't seen the solution posted.
    I have successfully gotten solaris x86 11/06 to install and run on my core 2 duo machine. I had tried solaris x86 06/06, but I could only run in 32bit mode until patch 118855-19 was installed. It looks like 118855-33 is the baseline for 11/06.
    With 06/06 I had to edit the grub command and add " kernel/unix" to the end of the 2nd line. This would force 32 bit mode rather than 64 bit. If I tried 64 bit, it would enter an endless reboot cycle. Once I installed the patch to 118855-19 I could run solaris 10 06/06 in 64 bit mode without issue.
    Again, since solaris 10 11/06 is at 118855-33, it runs on my core2 machine straight from the install.
    Hope this helps

    On a laptop there is little point with running a 64-bit operating system unless it physically has more than 4gb of ram, or if you are processing datasets exceeding 4GB of ram. Unless you're into assembly or use Solaris for some reason to manipulate media, little is to be gained by using 64-bit versions if anything. The increased pointer, integer, and padding causes more memory to use for the same software, most software on 64-bit operating systems runs in 32-bit mode because there is no need to have 16 exabyte memory addressing capability for anything but media encoders, giant databases, or extremely bloated single-threaded software. Sun Java Creator takes a heck of a lot of ram, but even at peak it's still under 4GB. If you move files bigger than 4GB, the ability to memory map all 4096MB might have less overhead on a 64-bit operating system, but generally from an end-user perspective, especially on a fast Intel or Opteron system, you won't notice the difference much. Solaris is bi-arch, a large chunk of Windows Vista and XP x64 is bi-arch, and most of FreeBSD and Linux are bi-arch in 64-bit versions, as I said, no point in making everything 64-bit. 64-bit device drivers is an issue for every OS, you should stick with 32-bit on a laptop, and hold off on desktops unless you need extended assembly registers available only in 64-bit mode.

  • 10.2.0.1 to 10.2.0.3 patchset for Solaris x86 64-bit

    I'm having difficulty in locating the patch (or patchset) to upgrade my 10.2.0.1 database to 10.2.0.3
    This is for the Solaris x86 64-bit platform.
    I'm using the metalink patches area but am baffled on how to find what I need.
    Any thoughts ?
    Thanks in advance
    Mark
    EDIT... I believe I found what I was looking for ... Patchset 5337014 ... took me a while but I believe this is the one.
    Edited by: markhooper on Aug 13, 2009 10:05 AM

    Yes. You found it. ;)

  • Applying patches to physical standby node(Data Guard 10.2.0.3)

    Hello,
    I have a data guard 10.2.0.3 environment (1 primary and 1 physical standby on a separate node) on solaris 10 and i want to document the procedure in applying patches to this environment.
    I saw the article in Metalink Note 278641.1 which describes the procedure in applying a patchset to both nodes. It looks like both nodes need to be down before applying the oracle patchset.
    Can we not apply the patches on only the standby while the primary stays up and running? My guess is you can't if the patches are significant i.e. it changes versions of the oracle binaries. But i want to confirm this.
    Also, if we are applying solaris patches, i.e. nothing related to Oracle, we should be able to just apply them to the standby while keeping the primary up and running right?
    The following has worked so far but i wanted to find some documentation that confirms it's ok.
    1. shutdown oracle on standby node.
    2. apply solaris patches...
    3. restart oracle on standby node and put in managed recovery mode.
    Any comments are appreciated.
    Thanks.

    Hi
    Did you get an answer for your question yet? I have the same problem with one of our databases. Would be very nice, if you could tell me.
    Regards
    Felix

Maybe you are looking for