Applying Patches to ISE 1.2.0.899

I am running ISE 1.2.0.899 Patch level 2. 
I want to upgrade to patch level 6. 
I understand that the ptaches are supposed to be cumulative and not incremental...but I want to make sure as I am 4 levels behind...Is there anything special I have to do? Do I just apply patch 6 from the Primary Admin node and it brings me straight to patch 6?
Didn't note anything in the release notes, but I don't want to run into any surprises.
Thanks, 
Phill

Well,
I upgraded to patch 6. The patch did not replicate over to the other two nodes as I expected.
I called TAC and was told to accomplish this manually, which I did on the secondary node.
I did not have FTP access to the one in my DMZ, so I had to put that one off until the evening (had to get the firewall guy to give me access...then wait until after production hours). Anyhow, we noted a large increase in traffic between the primary ISE node and the Policy Service node in our DMZ...traffic flow seemed to be around 40 megs. This flow ceased when I manually upgraded the DMZ Policy Service Node.

Similar Messages

  • Help with cisco ISE 1.1.2.145 patch-3 to ISE 1.2.0.899-2-85601 upgrade procedure

    Need help from ISE experts/gurus in this forum.
    Due to a nasty bug in Cisco ISE (bug ID CSCue38827 ISE Adclient daemon not initializing on leave/join), this bug will make the ISE stopping working completely and a reboot is required (very nice bug from cisco) .  This leaves me no choice but to upgrade to version 1.2.0.899-2-85601. 
    Scenario: 
    - 4 nodes in the environment running ISE version 1.1.2.145 patch 3
    - node 1 is Primary Admin and Secondary Monitoring - hostname is node1
    - node 2 is Secondary Admin and Primary Monitoring - hostname is node2
    - node 3 is Policy service node - hostname is node3
    - node 4 is Policy service node - hostname is node4
    Objective:  Upgrade the ISE environment to ISE version 1.2 with patch version 1.2.0.899-2-85601.
    My understand  is that I have to upgrade the existing environment from ISE version 1.1.2.145 patch 3
    to ISE version 1.1.2.145 patch 10 (patch 10 was released on 10/04/2013) before I can proceed with
    upgrading to ISE version 1.2 and patch it with 1.2.0.899-2-85601. 
    Can I patch my exsiting environment from 1.1.2 patch 3 to patch 10 prior to upgrading to version 1.2.0.899-2-85601?
    I look at Cisco website and patch 10 was released on 10/04/2013 while version 1.2 was released back in 07/05/2013.
    I am trying to get a definite answer from Cisco TAC but it seems like they don't know either. 
    Question #1:  How do I proceed with upgrading the current ISE environment from 1.1.2.145 patch 3 to 1.1.2.145 patch 10?
    Propose solution: 
    step #1: make ISE node1 to be both Primary Admin and Primary monitoring.  ISE node2 is now Secondary Admin and Secondary Monitoring. 
             Then go ahead and apply ISE version 1.1.2.145 patch 10 to ISE node2 via the GUI,
    step #2: Once ISE node2 patch 10 is completed, make node2 Primary Admin and Primary Monitoring.  At this point, apply ISE 1.1.2.145 patch 10
             to ISE node1 via the GUI,
    step #3: Once ISE node1 patch 10 is completed, make node1 Primary Admin and Secondary Monitoring and node2 Secondary Admin and Primary Monitoring,
    step #4: apply ISE 1.1.2.145 patch 10 to ISE Policy Service node3.  Once that is completed, verify that node2 is working and accepting traffics,
    step #5: apply ISE 1.1.2.145 patch 10 to ISE Policy Service node4.  Once that is completed, verify that node2 is working and accepting traffics,
    Question #2: How do I proceed with upgrading the current ISE environment from 1.1.2.145 patch 10 to ISE version 1.2 with patch version 1.2.0.899-2-85601?
    Propose solution:
    step #1:  Make ISE node1 the Primary Admin and Primary monitoring.  At this point ISE node2 will become Secondary Admin and Secondary Monitoring
    step #2:  Perform upgrade on the ISE node2 via the command line "application upgrade <app-bundle> <repository>".  Once ISE node2 upgrade is completed, it will
              form a new ISE 1.2 cluster independent of the old cluster,
    step #3:  Perform upgrade on the ISE Policy Service node3 via the command line "application upgrade <app-bundle> <repository>".  After the upgrade the ISE
              Policy Service Node3 will automatically joins the ISE node2 which is already in version 1.2
    step #4:  Perform upgrade on the ISE Policy Service node4 via the command line "application upgrade <app-bundle> <repository>".  After the upgrade the ISE
              Policy Service Node4 will automatically joins the ISE node2 which is already in version 1.2
    step #5:  At this point the only node remaining in the 1.1.2.145 patch 10 is the ISE node1 Primary Admin and Primary Monitoring
    step #6:  Check and see if there are any more PSN's registered in ISE node1 (there should not be any)
    step #7:  Perform the upgrade on the ISE node1 from command line  "application upgrade <app-bundle> <repository>"
    step #8:  Once upgrade on ISE node1 is complete, ISE node1 will automatically join the new ISE 1.2 cluster,
    step #9:  Make ISE node1 Primary Admin and Secondary and ISE node2 Secondary Admin and Primary Monitoring,
    Question #3:  How do I proceed with upgrading the current ISE environment from 1.2 patch0 to 1.2.0.899-2-85601?
    Propose solution: 
    step #1: make ISE node1 to be both Primary Admin and Primary monitoring.  ISE node2 is now Secondary Admin and Secondary Monitoring. 
             Then go ahead and apply ISE 1.2.0.899-2-85601 to ISE node2 via the GUI,
    step #2: Once ISE node2 1.2.0.899-2-85601 is completed, make node2 Primary Admin and Primary Monitoring.  At this point, apply 1.2.0.899-2-85601
             to ISE node1 via the GUI,
    step #3: Once ISE node1 patch 10 is completed, make node1 Primary Admin and Secondary Monitoring and node2 Secondary Admin and Primary Monitoring,
    step #4: apply ISE 1.2.0.899-2-85601 to ISE Policy Service node3.  Once that is completed, verify that node2 is working and accepting traffics,
    step #5: apply ISE 1.2.0.899-2-85601 to ISE Policy Service node4.  Once that is completed, verify that node2 is working and accepting traffics,
    does these steps make sense to you?
    Thanks in advance.

    David,
    A few answers to your questions -
    Question 1: My recommendation is to follow vivek's blog since most fixes and upgrade steps are provided there - I would recommend installing the patch that was release prior to the 1.2 release date since the directions to "install the latest patch" would put you at the version of when the ISE 1.2 was released
    https://supportforums.cisco.com/community/netpro/security/aaa/blog/2013/07/19/upgrading-to-identity-services-engine-ise-12
    You do not have the ability to install ISE patch through the GUI on any of the "non-primary" nodes (you can use the cli commmand to achieve this), the current patching process was designed so you can install the patch on the primary admin node and it will then roll the patches out to the entire deployment (one node at at time). I painfully verified this by watching the services on each node and when a node was up and operational the next node would start the patching process. First the admin nodes then the PSNs.
    Every ISE upgrade that I have attempted as not been flawless and I can assure you that I have done an upgrade on 1.1.2 patch 3 and this worked fine, however I used the following process. You will need the service account information that is used to join your ISE to AD.
    I picked the secondary admin/monitoring node and made it a standalone node by deregistering (much like the old procedure) in your case this will be node2.
    I backed up the certificates from the UI and the database from the CLI (pick the local disk or ftp-your choice).
    I reset the database and ran the upgrade script (since I did not have access to the vsphere console or at the location of the non UCS hardware [for a 1.1.4 upgrade]).
    Once the upgrade was completed I then restored the 1.1.x database, ISE 1.2 now has the ability to detect the version of the database that is restored and will perform the migration for you.
    Once the restore finished, I then restored the certificate and picked one of the PSNs
    backup the cert,
    Had the AD join user account handy
    reset-db,
    and run the upgrade script.
    Once that is done I then restore the cert
    Join the PSN to the new deployment
    Join both nodes to AD through primary admin node
    Monitor for a few days (seperate consoles to make sure everything runs smooth)
    If anything doesnt look or feel right, you can shut down the 1.2 PSN and force everything through the existing 1.1.2 setup and perform some investigation, if it all goes smooth you can then follow the above step for the other two nodes, starting with the last PSN and the the last admin node.
    Thanks and I hope that helps,
    Tarik Admani
    *Please rate helpful posts*

  • ISE 1.2.0.899 patch 1,2,3,4 with blackberry 9700

                       Hi, I'm using ISE 1.2.0.899 patch 1,2,3,4, and I am trying to use guest portal on blackberry 9700.
    I verified that I am able to do 802.1x with blackberry.
    I associated to ssid, and opened web browser, and I can see the guest portal.
    However, when I clicked on "don't have account?" to creating guest ID, I could not go any further.
    does anyone know if it's supported or not ? if it's working or not ?
    I know in the network compatibility document for 1.2, there is no mention about blackberry.
    does anyone know about this ?

    Saurav Lodh, I did check the default time profile that is being used the sponsor. I even created a custom time profile to rule out any timeout on the Guest account, but even with the custom profile time the Guest account times out between 7 to 10 minutes and asks to re-authenticate again. I don't know if there is another place to look out for any timeouts, or is it maybe a bug with this version of ISE, but I couldn't find anybody else having this same issue which makes me think that it has to be a setting that is causing this problem.

  • ISE 1.2.0.899 Patch 7

    Hey guys I have ISE 1.2.0.899 with patch 7 installed in my environment, also I have a WLC 5508 running version 7.4.121.0. We are authenticating our user with ISE. We are having an issue with our Guest WLAN, after we create an account with the sponsor portal for our guests, they can log in and get to the internet, but after 7 to 10 minutes the guest user is ask to re-authenticate again. I check in the WLC to see if there is any timeout for our Guest WLAN, but there not. At this point we don't know what is causing this problem since it only happens with the Guest WLAN, the other WLAN for Users that authenticate with AD credentials works without any problems. Is anybody experiencing this same issue? 

    Saurav Lodh, I did check the default time profile that is being used the sponsor. I even created a custom time profile to rule out any timeout on the Guest account, but even with the custom profile time the Guest account times out between 7 to 10 minutes and asks to re-authenticate again. I don't know if there is another place to look out for any timeouts, or is it maybe a bug with this version of ISE, but I couldn't find anybody else having this same issue which makes me think that it has to be a setting that is causing this problem.

  • Ise 1.2.0.899 CWA Windows AD based

    Hi, I'm running ISE 1.2.0.899 patch 6
    When a use a internal ISE user which in the Identity Group "Onboard". The guest authentication, self registration and profiling are going just great (see picture) . But when I use a AD created user which on AD is in the same "Onboard"  security group, it is authenticated but further than that I got the message" The system admin has either not configured or enabled a policy for your device". Furthermore I can see in the log that the AD user is authenticatd with Identity Group "Any".  I tried several things in the authorization in matching the memberof/ external group based on "Onboard" with or without the guest flow specified.  If I manage to get the device to registered in the Identity Endpoint and I try to match on a AD group I see that is working.
    So to bottom line of this question is; if the BYOD/CYOD is not registered in the ISE ( Identity Endpoint)  which policy rule can I make so it will profile it as a android and put it as a registered device?
    Does anyone know how this can be configured?  Any help is appreciated.
    Thanks in advance,
    Kind regards, 
    Michel

    Hi Neno,
    I was mislead by the d0t1x AuthN in my first statement, if a connection is made on d0t1x with PEAP (mschapv2) then the AuthN check in the identity source sequence (first AD ) if the user exist. This is the case so this connection is allowed by AuthZ rule: BYOD_AD_D0t1x
    1. What do you have configured under: Administration > System > Settings > Profiling > CoA?
    currently it is configured for: "no COA"
    as the cisco documentation said:
    Exemptions for Issuing a Change of Authorization:
    An Endpoint Created through Guest Device Registration flow—When endpoints are created through device registration for the guests. Even though CoA is enabled globally in Cisco ISE, the profiling service does not issue a CoA so that the device registration flow is not affected. In particular, the PortBounce CoA global configuration breaks the flow of the connecting endpoint.

  • ACS 5.3 applying patch

    Hello,
    I have problem with applying patch on ACS 5.3. In release notes there is mentioned following command format:
    acs patch install patch-name.tar.gpg repository repository-name
    The problem is ACS 5.3 does't have this command syntax.
    It does't have acs command.
    Here is what i have trued:
    acs/admin# patch install 5-3-0-40-1.tar.gpg rep
    Do you want to save the current configuration ? (yes/no) [yes] ?
    Generating configuration...
    Saved the running configuration to startup successfully
    % Manifest file not found in the bundle
    repository rep
      url ftp://172.30.5.217
      user user password hash c7b11123e528660abea78d974339875394fbb234
    Here is supported command that i found on ACS 5.3.
    acs/admin# ?
    Exec commands:
      application  Application Install and Administration
      backup       Backup system
      backup-logs  Backup system and application logs
      clock        Set the system clock
      configure    Enter configuration mode
      copy         Copy commands
      debug        Debugging functions (see also 'undebug')
      delete       Delete a file
      dir          List files on local filesystem
      exit         Exit from the EXEC
      forceout     Force Logout all the sessions of a specific system user
      halt         Shutdown the system
      mkdir        Create new directory
      nslookup     DNS lookup for an IP address or hostname
      patch        Install System or Application Patch
      ping         Ping a remote ip address
      reload       Reboot the system
      restore      Restore system
      rmdir        Remove existing directory
      show         Show running system information
      ssh          SSH to a remote ip address
      tech         TAC commands
      telnet       Telnet to a remote ip address
      terminal     Set terminal line parameters
      traceroute   Trace the route to a remote ip address
      undebug      Disable debugging functions (see also 'debug')
      write        Write running system information
    acs/admin#

    Hi,
    I find this odd, can you run a "show application"
    Here is the output of my ACS -
    Version information of installed applications
    Cisco ACS VERSION INFORMATION
    Version : 5.3.0.40.4
    Internal Build ID : B.839.EVAL
    Patches :
    5-3-0-40-2
    5-3-0-40-4
    gdtsrv-acs5/admin# ?
    Exec commands:
      acs          ACS control commands
      acs-config   ACS config mode
      application  Application Install and Administration
      backup       Backup system
      backup-logs  Backup system and application logs
      clock        Set the system clock
      configure    Enter configuration mode
      copy         Copy commands
      debug        Debugging functions (see also 'undebug')
      delete       Delete a file
      dir          List files on local filesystem
      exit         Exit from the EXEC
      forceout     Force Logout all the sessions of a specific system user
      halt         Shutdown the system
      mkdir        Create new directory
      nslookup     DNS lookup for an IP address or hostname
      patch        Install System or Application Patch
      ping         Ping a remote ip address
      reload       Reboot the system
      restore      Restore system
      rmdir        Remove existing directory
      show         Show running system information
      ssh          SSH to a remote ip address
      tech         TAC commands
      telnet       Telnet to a remote ip address
      terminal     Set terminal line parameters
      traceroute   Trace the route to a remote ip address
      undebug      Disable debugging functions (see also 'debug')
      write        Write running system information
    Tarik Admani
    *Please rate helpful posts*

  • Error while applying patch for SOA suite 10.1.3.4 on Weblogic 9.2 - URGENT

    Hi All,
    I am trying to apply a weblogic patch on SOA server but facing an error while applying the Opatch . I checked the accessibilty to opatch inventory by using the command % opatch lsinventory . This executed fine and there were no errors. But when I try applying the opatch I get the error -that some jars missing . Even if I replace the jars and try executing opatch again I face the same error . I googled a lot but couldnt find any solution . Please let me what can be done for solving this error .
    D:\7337034>opatch apply -oh D:\product\10.1.3.1\OracleAS_1
    Oracle Interim Patch Installer version 1.0.0.0.61
    Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
    Oracle recommends you to use the latest OPatch version
    and read the OPatch documentation available in the OPatch/docs
    directory for usage. For information about the latest OPatch and
    other support-related issues, refer to document ID 293369.1
    available on My Oracle Support (https://myoraclesupport.oracle.com)
    Oracle Home : D:\product\10.1.3.1\OracleAS_1
    Oracle Home Inventory : D:\product\10.1.3.1\OracleAS_1\inventory
    Central Inventory : C:\Program Files\oracle\inventory
    from : N/A
    OUI location : D:\product\10.1.3.1\OracleAS_1\oui
    OUI shared library : D:\product\10.1.3.1\OracleAS_1\oui\lib\win32\oraInstalle
    r.dll
    Java location : "D:\product\10.1.3.1\OracleAS_1\jdk\jre\bin\java.exe"
    Log file location : D:\product\10.1.3.1\OracleAS_1/.patch_storage/<patch ID>
    /*.log
    Creating log file "D:\product\10.1.3.1\oracleas_1\.patch_storage\7337034\Apply_7
    337034_06-02-2009_13-39-26.log"
    Provide your email address to be informed of security issues, install and
    initiate Oracle Configuration Manager. Easier for you if you use your My
    Oracle Support Email address/User Name.
    Visit http://www.oracle.com/support/policies.html for details.
    Email address/User Name: [email protected]
    Provide your My Oracle Support password to receive security updates via your My
    Oracle Support account.
    Password (optional):
    Password (optional):
    Unable to establish a network connection to Oracle. If your systems require a
    proxy server for outbound Internet connections, enter the proxy server details
    in this format:
    [<proxy-user>@]<proxy-host>[:<proxy-port>]
    If you want to remain uninformed of critical security issues in your
    configuration, enter NONE
    Proxy specification: NONE
    ** Installing base package **
    Deploying core - Version 10.3.1.0.0
    Deploying engines - Version 10.2.7.1.0
    Deploying metricdata - Version 10.2.4.0.3
    Deploying scripts - Version 10.3.1.0.0
    Oracle Configuration Manager has been configured in disconnected mode. If the
    target ORACLE_HOME is running a database, please refer to the
    "Post-installation Database Configuration" section of the OCM Installation
    and Administration Guide
    (http://www.oracle.com/technology/documentation/ocm.html) to complete the
    installation.
    View configuration data reports and access valuable configuration best
    practices by going to My Oracle Support.
    Backing up comps.xml ...
    OPatch detected non-cluster Oracle Home from the inventory and will patch the lo
    cal system only.
    Please shut down Oracle instances running out of this ORACLE_HOME
    (Oracle Home = d:\product\10.1.3.1\oracleas_1)
    Is this system ready for updating?
    Please respond Y|N >
    y
    Applying patch 7337034...
    Patching jar files...
    OPatch encounters the following issues during file patching:
    The following java archives on Windows had problems with being patched:
    1. orabpel.jar
    [ object: DomainFilter.class ]
    2. orabpel.jar
    [ object: AdapterFrameworkListenerImpl$RoutingRuleXPathInfo.class ]
    3. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
    [ No java archive file found. ]
    4. orabpel.jar
    [ Couldn't make backup copy of file. ]
    5. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
    [ No java archive file found. ]
    6. orabpel.jar
    [ Couldn't make backup copy of file. ]
    7. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
    [ No java archive file found. ]
    8. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
    [ No java archive file found. ]
    9. orabpel.jar
    [ Couldn't make backup copy of file. ]
    Replying 'Y' will terminate the patch installation immediately. It WILL NOT rest
    ore any updates that have been performed to this point. It WILL NOT update the i
    nventory.
    Replying 'N' will update the inventory showing the patch has been applied.
    NOTE: After replying either 'Y' or 'N' it is critical to review:
    My Oracle Support Note 312767.1 How to rollback a failed Interim patch ins
    tallation.
    Do you want to STOP?
    Please respond Y|N >
    y
    File Patching Error!
    ERROR: OPatch failed during patching, possibly due to missing files.
    OPatch returns with error code = 200

    Hi , I am facing the same issue.
    were you able to resolve it.
    please let me know if you were.
    Many Thanks.

  • Error while applying Patch 4960210

    Hi,
    I am trying to integrate oracle apps with Oracle EBS 12R and following Doc Id:376811.1 from metalink.
    I have successfully installed patch 5983637, but when I try to install patch 4960210 on it, even though I stopped all the services on app server, i get the following error:
    Certain files which need to be reinstalled by oracle universal installer are being used by one or more applications.
    Please close any running applications before continuing.
    NOTE: when I upgraded the existing OracleAS 10.1.2.0.2 Infrastructure to Oracle Identity Management 10g (10.1.4.0.1) I created a new oracle home and installed my components there (unknowingly), so not sure if this causing problem.
    Not able to go further Please help..!!!!
    Thanks

    Hi,
    As a part of R12 upgrade.
    once The Installation creates APPL_TOP, COMMON_TOP, INST_TOP and 10g Oracle Home
    Now we are connected to R12 application.
    Applied patch AD.A 4502962.
    Run the American English upgrade patch driver
    cd $AU_TOP/patch/115/driver
    adpatch options=nocopyportion,nogenerateportion
    Please enter the name of your AutoPatch driver file: u4440000.drv
    This patch doesn't have readme it will be under cd $AU_TOP/patch/115/driver
    Thanks,
    Bhanu Chander

  • Error while applying patch to 12.1.3 from 12.1.1

    Hi,
    while I'm applying patch 9239090, I'm getting the following error:
    The following Oracle Forms objects did not generate successfully:
    au      resource        IEXFBALI.pll
    au      resource        OKSACTEV.pll
    au      resource        OKSAUDET.pll
    au      resource        CSCUTILS.pll
    au      resource        OKCEXEVT.pll
    au      resource        OKCEXPOR.pll
    au      resource        OKCKSRCH.pll
    The following Oracle Forms objects did not generate successfuly:
    iex     forms/US     IEXCUOVW.fmx
    iex     forms/US     IEXRCALL.fmx
    wms     forms/US     WMSLABEL.fmx
    wsh     forms/US     WSHQSSUI.fmx
    wsh     forms/US     WSHSTREF.fmx
    wsh     forms/US     WSHFSTRX.fmx
    and i have allready applied patch 9239089 before 9239090

    IEXCUOVW.fmx
    Error Statement:
    FRM-30064: Unable to parse statement select site_uses.location location,
           party_site.party_site_number,
           substr(loc.address1,1,25) ||' '
                || substr(loc.address2,1,25) ||' '
                || substr(loc.address3,1,25) ||' '
                || substr(loc.address4,1,25) ||' '
                || loc.city|| ',' || ' '
                || nvl(loc.state, loc.province) ||' '
                || t.territory_short_name address,
           site_uses.primary_flag,
           loc.address1 address1,
           loc.address2,
           loc.city ||','|| ' '|| nvl(loc.state, loc.province)
               ||' '||loc.postal_code|| ' '
               || t.territory_short_name address3,
           site_uses.site_use_id customer_site_use_id,
           site_uses.cust_acct_site_id address_id,
           site_uses.bill_to_site_use_id bill_to_site_use_id,
           site_uses.primary_salesrep_id primary_salesrep_id,
           loc_assign.loc_id location_id,
           loc.state state,
           loc.country country,
           loc.postal_code postal_code,
           site_uses.territory_id territory_id,
           lp.meaning business_purpose,
           lp2.meaning primary_flag_meaning,
           ca.cust_account_id cust_account_id,
           ca.account_number account_number,
            decode(substrb(person.person_last_name,1,50), null,
                        substrb(person.person_first_name,1,40),
                        substrb(person.person_last_name,1,50) ||', ' ||
                        substrb(person.person_first_name,1,40))
                        contact_name,
           owner_party.party_name owner_party
    from hz_cust_acct_sites acct_site,
         hz_party_sites party_site,
         hz_cust_accounts ca,
         hz_loc_assignments loc_assign,
         hz_locations loc,
         hz_cust_site_uses site_uses,
         fnd_territories_vl t,
         ar_lookups lp ,
         ar_lookups lp2,
         hz_cust_account_roles  role,
         hz_parties person,
         hz_relationships  rel,
         hz_parties owner_party
    where ca.party_id IN
         (SELECT CAST(:IEXCUOVW_HEADER.ORG_PARTY_ID AS NUMBER) FROM dual
           UNION
          SELECT ar.related_party_id
            FROM ar_paying_relationships_v ar
           WHERE ar.party_id = :IEXCUOVW_HEADER.PARTY_ID
             AND TRUNC(sysdate) BETWEEN
                 TRUNC(NVL(ar.effective_start_date,sysdate)) AND
                 TRUNC(NVL(ar.effective_end_date,sysdate))  )
      and acct_site.cust_account_id = ca.cust_account_id
      and acct_site.party_site_id = party_site.party_site_id
      and loc.location_id = party_site.location_id
      and loc.location_id = loc_assign.location_id
      and nvl(acct_site.org_id, -99) = nvl(loc_assign.org_id, -99)
      and acct_site.cust_acct_site_id = site_uses.cust_acct_site_id
      and loc.country = t.territory_code
      and site_uses.site_use_code = lp.lookup_code
      and lp.lookup_type = 'SITE_USE_CODE'
      and site_uses.site_use_code = 'BILL_TO'
    --  and site_uses.status = 'A'
    --  and acct_site.status = 'A'
      and site_uses.primary_flag = lp2.lookup_code
      and lp2.lookup_type = 'YES/NO'
      and   site_uses.contact_id = role.cust_account_role_id(+)
      and   role.party_id = rel.party_id(+)
      and   rel.subject_table_name(+) = 'HZ_PARTIES'
      and   rel.object_table_name(+) = 'HZ_PARTIES'
      and   rel.directional_flag(+)  = 'F'
      and   role.role_type(+)          = 'CONTACT'
      and   rel.subject_id        = person.party_id(+)
      and owner_party.party_id = ca.party_id
    order by location,
             address1
    ORA-25137: Data value out of range
    Record Group IEXCUOVW_LOC_ORG_PAYING_RG
    Form: IEXCUOVW
    FRM-30085: Unable to adjust form for output.
    WMSLABEL.fmx
    Error Statements:
    FRM-30064: Unable to parse statement select upet.type_name EPC_type_name, upec.name category_name, upet.type_id, upec.category_id              
    from mgd_idencoding_category upec,
         mgd_idencoding_type upet
    where upec.category_id = upet.category_id
    and ((NVl(upet.partition_value,0)= 0 and upet.category_id = 1 ) or upet.category_id <> 1)
    order by upec.category_id,type_name.
    ORA-00942: table or view does not exist
    Record Group EPC_RULE_RG
    Form: WMSLABEL
    FRM-30085: Unable to adjust form for output.
    Generated    0 files successfully.
    Generated    0 files with non-fatal warnings.
    Generated    1 files with fatal errors.
    adfrmgen is exiting with status 1
    End of adfrmgen session
    Date/time is Mon Feb 20 2012 04:44:01
    WSHFSTRX.fmx
    Error Statements :
    Compiling package body TRIP...
    Compilation error on package body TRIP:
    PL/SQL ERROR 905 at line 1703, column 18
    object APPS.WSH_FTE_TP_INTEGRATION is invalid
    PL/SQL ERROR 0 at line 1703, column 18
    Item ignored
    PL/SQL ERROR 320 at line 1714, column 35
    the declaration of the type of this expression is incomplete or malformed
    PL/SQL ERROR 0 at line 1712, column 5
    Statement ignored
    PL/SQL ERROR 320 at line 1720, column 16
    the declaration of the type of this expression is incomplete or malformed
    PL/SQL ERROR 0 at line 1720, column 6
    Statement ignored
    PL/SQL ERROR 320 at line 1721, column 16
    the declaration of the type of this expression is incomplete or malformed
    PL/SQL ERROR 0 at line 1721, column 6
    Statement ignored
    PL/SQL ERROR 320 at line 1722, column 17
    the declaration of the type of this expression is incomplete or malformed
    PL/SQL ERROR 0 at line 1722, column 6
    Statement ignored
    IEXRCALL.fmx
    Error Statements:
    FRM-30064: Unable to parse statement select site_uses.location location,
           party_site.party_site_number,
           substr(loc.address1,1,25) ||' '
                || substr(loc.address2,1,25) ||' '
                || substr(loc.address3,1,25) ||' '
                || substr(loc.address4,1,25) ||' '
                || loc.city|| ',' || ' '
                || nvl(loc.state, loc.province) ||' '
                || t.territory_short_name address,
           site_uses.primary_flag,
           loc.address1 address1,
           loc.address2,
           loc.city ||','|| ' '|| nvl(loc.state, loc.province)
               ||' '||loc.postal_code|| ' '
               || t.territory_short_name address3,
           site_uses.site_use_id customer_site_use_id,
           site_uses.cust_acct_site_id address_id,
           site_uses.bill_to_site_use_id bill_to_site_use_id,
           site_uses.primary_salesrep_id primary_salesrep_id,
           loc_assign.loc_id location_id,
           loc.state state,
           loc.country country,
           loc.postal_code postal_code,
           site_uses.territory_id territory_id,
           lp.meaning business_purpose,
           lp2.meaning primary_flag_meaning,
           ca.cust_account_id cust_account_id,
           ca.account_number account_number,
            decode(substrb(person.person_last_name,1,50), null,
                        substrb(person.person_first_name,1,40),
                        substrb(person.person_last_name,1,50) ||', ' ||
                        substrb(person.person_first_name,1,40))
                        contact_name,
           owner_party.party_name owner_party
    from hz_cust_acct_sites acct_site,
         hz_party_sites party_site,
         hz_cust_accounts ca,
         hz_loc_assignments loc_assign,
         hz_locations loc,
         hz_cust_site_uses site_uses,
         fnd_territories_vl t,
         ar_lookups lp ,
         ar_lookups lp2,
         hz_cust_account_roles  role,
         hz_parties person,
         hz_relationships  rel,
         hz_parties owner_party
    where ca.party_id IN
         (SELECT CAST(:IEXCUOVW_HEADER.ORG_PARTY_ID AS NUMBER) FROM dual
           UNION
          SELECT ar.related_party_id
            FROM ar_paying_relationships_v ar
           WHERE ar.party_id = :IEXCUOVW_HEADER.PARTY_ID
             AND TRUNC(sysdate) BETWEEN
                 TRUNC(NVL(ar.effective_start_date,sysdate)) AND
                 TRUNC(NVL(ar.effective_end_date,sysdate))  )
      and acct_site.cust_account_id = ca.cust_account_id
      and acct_site.party_site_id = party_site.party_site_id
      and loc.location_id = party_site.location_id
      and loc.location_id = loc_assign.location_id
      and nvl(acct_site.org_id, -99) = nvl(loc_assign.org_id, -99)
      and acct_site.cust_acct_site_id = site_uses.cust_acct_site_id
      and loc.country = t.territory_code
      and site_uses.site_use_code = lp.lookup_code
      and lp.lookup_type = 'SITE_USE_CODE'
      and site_uses.site_use_code = 'BILL_TO'
    --  and site_uses.status = 'A'
    --  and acct_site.status = 'A'
      and site_uses.primary_flag = lp2.lookup_code
      and lp2.lookup_type = 'YES/NO'
      and   site_uses.contact_id = role.cust_account_role_id(+)
      and   role.party_id = rel.party_id(+)
      and   rel.subject_table_name(+) = 'HZ_PARTIES'
      and   rel.object_table_name(+) = 'HZ_PARTIES'
      and   rel.directional_flag(+)  = 'F'
      and   role.role_type(+)          = 'CONTACT'
      and   rel.subject_id        = person.party_id(+)
      and owner_party.party_id = ca.party_id
    order by location,
             address1
    ORA-25137: Data value out of range
    Record Group IEXCUOVW_LOC_ORG_PAYING_RG
    Form: IEXRCALL
    FRM-30085: Unable to adjust form for output.
    WSHSTREF.fmx
    Error statements:
    Compiling package body TRIP...
    Compilation error on package body TRIP:
    PL/SQL ERROR 905 at line 1703, column 18
    object APPS.WSH_FTE_TP_INTEGRATION is invalid
    PL/SQL ERROR 0 at line 1703, column 18
    Item ignored
    PL/SQL ERROR 320 at line 1714, column 35
    the declaration of the type of this expression is incomplete or malformed
    PL/SQL ERROR 0 at line 1712, column 5
    Statement ignored
    PL/SQL ERROR 320 at line 1720, column 16
    the declaration of the type of this expression is incomplete or malformed
    PL/SQL ERROR 0 at line 1720, column 6
    Statement ignored
    PL/SQL ERROR 320 at line 1721, column 16
    the declaration of the type of this expression is incomplete or malformed
    PL/SQL ERROR 0 at line 1721, column 6
    Statement ignored
    PL/SQL ERROR 320 at line 1722, column 17
    the declaration of the type of this expression is incomplete or malformed
    PL/SQL ERROR 0 at line 1722, column 6
    Statement ignored
    WSHQSSUI.fmx
    Error statements:
    Compiling package body TRIP...
    Compilation error on package body TRIP:
    PL/SQL ERROR 905 at line 1703, column 18
    object APPS.WSH_FTE_TP_INTEGRATION is invalid
    PL/SQL ERROR 0 at line 1703, column 18
    Item ignored
    PL/SQL ERROR 320 at line 1714, column 35
    the declaration of the type of this expression is incomplete or malformed
    PL/SQL ERROR 0 at line 1712, column 5
    Statement ignored
    PL/SQL ERROR 320 at line 1720, column 16
    the declaration of the type of this expression is incomplete or malformed
    PL/SQL ERROR 0 at line 1720, column 6
    Statement ignored
    PL/SQL ERROR 320 at line 1721, column 16
    the declaration of the type of this expression is incomplete or malformed
    PL/SQL ERROR 0 at line 1721, column 6
    Statement ignored
    PL/SQL ERROR 320 at line 1722, column 17
    the declaration of the type of this expression is incomplete or malformed
    PL/SQL ERROR 0 at line 1722, column 6
    Statement ignoredthese are the error statements

  • Error while applying Patch 9593176

    Hi,
    when i'm applying patch 9593176 the following errors appeared :
    Oracle Home       : /oracle/div4db/11.1.0
    Central Inventory : n/a
       from           : n/a
    OPatch version    : 11.1.0.6.2
    OUI version       : n/a
    OUI location      : n/a
    Log file location : /oracle/div4db/11.1.0/cfgtoollogs/opatch/opatch2012-02-24_13-40-03PM.log
    ApplySession applying interim patch '9593176' to OH '/oracle/div4db/11.1.0'
    Running prerequisite checks...
    Prerequisite check "CheckApplicable" failed.
    The details are:
    Patch 9593176: Required component(s) missing : [ oracle.developer.forms, 10.1.2.3.0 ]
    ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
    System intact, OPatch will not attempt to restore the system
    OPatch failed with error code 74i've checked the OAS version and it's 10.1.2.3.0

    Quite obvious:
    oracle.developer.forms, 10.1.2.3.0 whereas
    Oracle Home : /oracle/div4db/11.1.0which seems to be the oracle home of a 11.1 database. Did you set the oracle_home environment variable to the oracle home of your forms installation before invoking opatch?
    cheers

  • Error while applying patch 3384350

    Hi all,
    I'm receiving the following error while apply patch 3384350 (Supply Chain Management Family Pack J 11i.SCM_PF.J) to an 11.5.9 instance.
    from adpatch.log:
    The following Oracle Forms objects did not generate successfully:
    inv forms/US INVTDILT.fmx
    from worker log:
    Compiling package body CHECK_RESERVATIONS_ALLOCATIONS...
    Compilation error on package body CHECK_RESERVATIONS_ALLOCATIONS:
    PL/SQL ERROR 358 at line 12, column 9
    column 'INVENTORY_ITEM_ID' exists in more than one table; use qualifier
    PL/SQL ERROR 0 at line 10, column 2
    SQL Statement ignored
    I have a SR open, but thought I would ask here as well in case anyone else had ran into this issue. There was only 1 direct hit on metalink for this error and it provided no solution and it's bug # link was not accessible to the public.
    thanks in advance,
    -Chad

    Compiling package body CHECK_RESERVATIONS_ALLOCATIONS...
    Compilation error on package body CHECK_RESERVATIONS_ALLOCATIONS:
    PL/SQL ERROR 358 at line 12, column 9
    column 'INVENTORY_ITEM_ID' exists in more than one table; use qualifier
    PL/SQL ERROR 0 at line 10, column 2
    SQL Statement ignoredA workaround is to precede the column name ('INVENTORY_ITEM_ID') with the table name so that the column reference is unambiguous. Please note that this is only a workaround to fix the issue if you cannot afford waiting to hear back from Oracle support with a proper solution.

  • Error While Applying patch 9239089 Oracle Applications DBA 12.1.3 Product R

    Dear All,
    I want to upgrade my application from Release 12.1.1 To 12.1.3. on windows server 2003 R2.
    while applying patch 9239089 I got this error
    "Extracting object modules for product ad...
    lib: not found
    adlibout: error: cannot get table of contents in library file for product ad
    File name is D:/oracle/PROD/apps/apps_st/appl/ad/12.0.0/lib/adst.lib
    Skipping to next product...
    Please see the complete contents from log file.
    You are running adlibout, version 120.0
    Start of adlibout session
    Date/time is Sun May 8 17:02:50 AST 2011
    Log file is D:/oracle/PROD/apps/apps_st/appl/admin/PROD/log/adlibout.log
    Command line arguments are
    "filelist=D:/oracle/PROD/apps/apps_st/appl/admin/PROD/out/paoapp000.txt"
    Creating temporary file list...
    Done creating temporary file.
    ---ad----------------------------------------
    Extracting object modules for product ad...
    lib: not found
    adlibout: error: cannot get table of contents in library file for product ad
    File name is D:/oracle/PROD/apps/apps_st/appl/ad/12.0.0/lib/adst.lib
    Skipping to next product...
    End of adlibout session
    Date/time is Sun May 8 17:02:50 AST 2011
    Please Advise how to solve this issue.
    Thanks and regards

    lib: not foundPlease see these docs.
    Error when relinking programs LINK : fatal error LNK1104: cannot open file [ID 1308860.1]
    Patch 4157177 Error: Cannot Get Table Of Contents In Library File For Product Fnd [ID 335488.1]
    Adcfgclone Appstier Error Out In Adlnk806.Sh [ID 601788.1]
    Thanks,
    Hussein

  • Error While Applying patch ST-PI 2008_1_700 to solution Manager

    Dear Techies,
    Thanks alot for your fast response.
    We are trying to upgrade Solution Manager Stack from
    ST-PI 2005_1_700  to ST-PI 2008_1_700 ,
    While applying patch it was suddenly stopped with an error
    "Manual modification adjustment is neccessary"
    While I tried to adjust it.
    In Note correction tree. This the message with " green tick"
    "0001293326 EWA: Newest ST-PI Is Rated 'Outdated'; Wrong RTCCTOOL Date"
    and is not allowing me to proceed further.
    How to go about.
    Thanks in advance.
    regards,
    Kiran

    Hi Varun,
    Thanks for your reply.
    As suggested by you, I executed "RTCCTOOL" programme.
    It Has given that 4 notes were in red status.
    They are.
            1. [Note 69455  ]      Addon upgrade ST-A/PI 01N_700SOL
            Description     "Servicetools for Applications Plug-In" for Solution Manager 4.0-7.10  (Addon delta upgrade package)
            Implementation  From http://service.sap.com/supporttools->ST-A/PI download the addon upgrade package ST-A/PI           
                                     01N_700SOL. Upload to tx SAINT (just as you would  do for an installation) and install as per note 69455
                                     Then restart report RTCCTOOL and choose 'List->Refresh from SAPNet'.
            4. [Note 539977  ]     ST-PI Support Packages
    Description     Addon supportpackage level 4 for ST-PI 2008_1_700 for 7.00 [patches up to level 4 for Basis tools for  services]
    Implementation  Open http://service.sap.com/supporttools-> ST-PI 2008_1_700 ->Supportpk. Add patch SAPKITLRD4 (and predecessors if not yet implemented) to download basket. Release basket via  Maintenance optimizer. Upload from frontend int  transaction SPAM, define a queue and import the queue.
            6. [Note 539977  ]     Note 1312413 for ST-PI
            Description     Maintenance Certificates for SPAM/SAINT may get periodically overwritten by invalid ones on ST-PI  
                                   2008_1_7* SP 00. Prevent this proactively,even if you do not yet use the automatic maint. certificate 
                                  distribution.
             Implementation  We recommend that you implement the Supportpackage SP1 for ST-PI 2008_1* to solve the error. Only if 
                                      not possible implement note 1312413   with not version >=12 using SNOTE. Regarding automatic maint.
                                      certificate distribution see http://service.sap.com/maintenancecertificate.
            9. [Note 1293326  ]    EWA serviceprep correct. in sequence.
    Description     Wrong alerts appear in EWAlert Service preparation section (Newest ST-PI Rated Outdated / Wrong
                          RTCCTOOL Date) if Solution Manager ST-SER < 701_2008_2 SP1 and satellites on ST-PI 2008_1* / ST-A/PI 01L*.
    Implementation  Implement the coding correction of this note 1293326   with SNOTE to solve the wrong service preparation alerts. Else if you do not mind the wrong alerts simply set this recommendation manually to green after reading.
    These are in green status
    Successfully implemented addons/ transports/ notes
            2. [Note 69455  ]    Proc. after addon impl.
            3. [Note 539977  ]   Addon ST-PI 2008_1_700
            5. [Note 539977  ]   Note 1300023 for ST-PI
            7. [Note 539977  ]   Note 1293657 for ST-PI
            8. [Note 12103  ]    Collectors and TCOLL.
    While I tried to implement the note "69455" system is giving the message that there are no valid corrections and is coming out of the process
    "Note 0000069455 cannot be implemented since no valid correction is available."
    And is same for other notes also.
    How to go ahead.
    Thanks in advance.
    Regards,
    Kiran

  • Error while applying patch MLR#4

    hi,
    I am getting error while applying patch MLR#4. Can you please let me know whats error can be resolved?
    Please see below the snapshots from log file.
    Thanks,
    Vaibhav
    Execute perf_wid_pid_pcid.sql
    Error: Abort transaction
    java.lang.NullPointerException
    at oracle.tip.adapter.b2b.data.B2BSchemaUpdate.addAQJMSTransportProtocolToGenericExchange(B2BSchemaUpdate.java:1009)
    at oracle.tip.adapter.b2b.data.B2BSchemaUpdate.main(B2BSchemaUpdate.java:509)
    Begin Transaction
    Inserting DocumentRoutingID into X12_DOCUMENT_TYPE_PARAMETERS
    Failure! Error stack:
    java.lang.NullPointerException
    at oracle.tip.buslogic.bll.b2b.DocumentProtocolWizard.getDocumentTypeParameter(DocumentProtocolWizard.java:819)
    at oracle.tip.adapter.b2b.data.B2BParameterSeed.createDocumentTypeParameters(B2BParameterSeed.java:214)
    at oracle.tip.adapter.b2b.data.B2BParameterSeed.main(B2BParameterSeed.java:160)
    start: update opmn xml
    Transaction started
    An exception occured during seeding
    java.lang.NullPointerException
    at oracle.tip.buslogic.bll.b2b.DocumentProtocolWizard.getDocumentTypeParameter(DocumentProtocolWizard.java:819)
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSPatch.createCustomDocumentTypeParameters(EBMSPatch.java:386)
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSPatch.seed(EBMSPatch.java:56)
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSPatch.main(EBMSPatch.java:38)
    Seeding successful
    Error -: AIP-11001: Transaction closed: Error -: AIP-11001: Transaction closed
    at oracle.tip.buslogic.common.Transaction.commit(Transaction.java:72)
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSPatch.seed(EBMSPatch.java:79)
    at oracle.tip.adapter.b2b.exchange.ebms.EBMSPatch.main(EBMSPatch.java:38)
    Caused by: Error -: AIP-11001: Transaction closed
    at oracle.tip.repos.core.driver.CatalogTransaction.commit(CatalogTransaction.java:1464)
    at oracle.tip.buslogic.common.Transaction.commit(Transaction.java:70)
    ... 2 more
    Starting task #1 [AS1SeedTask] ...
    Task [AS1SeedTask]: starting ...
    EDI X12 over AS1 is being seeded.
    create BusinessProtocol EDI-EDI_X12 over AS1....
    creating AS Exchange Protocols...
    create AS1 1.0
    java.lang.Exception: No TransportProtocol found for the given name and revision 'EMail' '1.0'
    at oracle.tip.seed.AS1SeedTask.getTransportProtocol(AS1SeedTask.java:342)
    at oracle.tip.seed.AS1SeedTask.createAS1(AS1SeedTask.java:483)
    at oracle.tip.seed.AS1SeedTask.createAS1ExchangeProtocol(AS1SeedTask.java:423)
    at oracle.tip.seed.AS1SeedTask.createBusinessProtocol_EDI_EDI_X12_AS1(AS1SeedTask.java:530)
    at oracle.tip.seed.AS1SeedTask.doWork(AS1SeedTask.java:104)
    at oracle.tip.seed.SeedDriver.processTasks(SeedDriver.java:222)
    at oracle.tip.seed.SeedDriver.go(SeedDriver.java:283)
    at oracle.tip.seed.AS1SeedDriver.main(AS1SeedDriver.java:80)
    java.lang.Exception: No TransportProtocol found for the given name and revision 'EMail' '1.0'
    at oracle.tip.seed.AS1SeedTask.getTransportProtocol(AS1SeedTask.java:342)
    at oracle.tip.seed.AS1SeedTask.createAS1(AS1SeedTask.java:483)
    at oracle.tip.seed.AS1SeedTask.createAS1ExchangeProtocol(AS1SeedTask.java:423)
    at oracle.tip.seed.AS1SeedTask.createBusinessProtocol_EDI_EDI_X12_AS1(AS1SeedTask.java:530)
    at oracle.tip.seed.AS1SeedTask.doWork(AS1SeedTask.java:104)
    at oracle.tip.seed.SeedDriver.processTasks(SeedDriver.java:222)
    at oracle.tip.seed.SeedDriver.go(SeedDriver.java:283)
    ------------------------------------------

    Make sure that no oracle processes are running on windows, stop all services again and use the task manager to kill any oracle process that is running. But first read de README.txt that you have with your patch, there is all the steps you need to follow to perform that installation.
    Message was edited by:
    user637951

  • Error while applying patch u4440000.drv(part of R12 upgrade from 11.5.10.2)

    Hi All,
    Getting error while applying patch 4440000
    cd $AU_TOP/patch/115/driver/u4440000.drv
    ERROR:
    Failed: XDOLoader.class on worker 1
    Failed: CustMigrationTool.class on worker 2
    Failed: XDOLoader.class on worker 3
    Failed: XDOLoader.class on worker 4
    Worker 2 log file:*
    Start time for file is: Tue Jun 23 2009 00:14:02
    adjava -ms128m -mx256m -nojit oracle.jrad.migration.cust.CustMigrationTool ak % -customer_cust -username &un_apps @ -password &pw_apps -dbconnection &jdbc_db_addr -jrad_username &un_apps @ -jrad_password &pw_apps -jrad_dbconnection &jdbc_db_addr -rootpackage "/oracle/apps/ak/" -migrationdir &fullpath_ak_mds_directory
    Copyright (c) 2002 Oracle Corporation
    Redwood Shores, California, USA
    AD Java
    Version 12.0.0
    NOTE: You may not use this utility for custom development
    unless you have written permission from Oracle Corporation.
    Reading product information from file...
    Reading language and territory information from file...
    Reading language information from applUS.txt ...
    Temporarily resetting CLASSPATH to:
    "/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
    Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
    Exception in thread "main" java.lang.NoClassDefFoundError: oracle/jrad/migration/cust/CustMigrationTool
    AD Worker error:
    The above program failed. See the error messages listed
    above, if any, or see the log and output files for the program.
    Worker 1 log file:_
    Start time for file is: Tue Jun 23 2009 00:14:02
    adjava -ms128m -mx256m -nojit oracle.apps.xdo.oa.util.XDOLoader UPLOAD -DB_USERNAME &un_apps -DB_PASSWORD &pw_apps -JDBC_CONNECTION &jdbc_db_addr -LOB_TYPE TEMPLATE_SOURCE -APPS_SHORT_NAME AHL -LOB_CODE AHL_RA_ANZ_PRC_PLN_DAY -LANGUAGE en -TERRITORY US -XDO_FILE_TYPE RTF -TRANSLATE Y -FILE_NAME &fullpath:ahl:patch/115/publisher/templates/US:AHLRAT3.rtf
    Copyright (c) 2002 Oracle Corporation
    Redwood Shores, California, USA
    AD Java
    Version 12.0.0
    NOTE: You may not use this utility for custom development
    unless you have written permission from Oracle Corporation.
    Reading product information from file...
    Reading language and territory information from file...
    Reading language information from applUS.txt ...
    Temporarily resetting CLASSPATH to:
    "/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
    Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
    Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/java/util/collections/Comparator
    AD Worker error:
    The above program failed. See the error messages listed
    above, if any, or see the log and output files for the program.
    Time when worker failed: Tue Jun 23 2009 00:14:03
    Worker 3 log file:*
    Start time for file is: Tue Jun 23 2009 00:14:02
    adjava -ms128m -mx256m -nojit oracle.apps.xdo.oa.util.XDOLoader UPLOAD -DB_USERNAME &un_apps -DB_PASSWORD &pw_apps -JDBC_CONNECTION &jdbc_db_addr -LOB_TYPE TEMPLATE_SOURCE -APPS_SHORT_NAME AHL -LOB_CODE AHL_RA_ANZ_PRC_PLN_SUMM -LANGUAGE en -TERRITORY US -XDO_FILE_TYPE RTF -TRANSLATE Y -FILE_NAME &fullpath:ahl:patch/115/publisher/templates/US:AHLRAT4.rtf
    Copyright (c) 2002 Oracle Corporation
    Redwood Shores, California, USA
    AD Java
    Version 12.0.0
    NOTE: You may not use this utility for custom development
    unless you have written permission from Oracle Corporation.
    Reading product information from file...
    Reading language and territory information from file...
    Reading language information from applUS.txt ...
    Temporarily resetting CLASSPATH to:
    "/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
    Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
    Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/java/util/collections/Comparator
    AD Worker error:
    The above program failed. See the error messages listed
    above, if any, or see the log and output files for the program.
    Time when worker failed: Tue Jun 23 2009 00:14:03
    Worker 4 log file:_
    Start time for file is: Tue Jun 23 2009 00:14:01
    adjava -ms128m -mx256m -nojit oracle.apps.xdo.oa.util.XDOLoader UPLOAD -DB_USERNAME &un_apps -DB_PASSWORD &pw_apps -JDBC_CONNECTION &jdbc_db_addr -LOB_TYPE TEMPLATE_SOURCE -APPS_SHORT_NAME AHL -LOB_CODE AHLPRDWC -LANGUAGE en -TERRITORY US -XDO_FILE_TYPE RTF -TRANSLATE Y -FILE_NAME &fullpath:ahl:patch/115/publisher/templates/US:AHLPRDWC1.rtf
    Copyright (c) 2002 Oracle Corporation
    Redwood Shores, California, USA
    AD Java
    Version 12.0.0
    NOTE: You may not use this utility for custom development
    unless you have written permission from Oracle Corporation.
    Reading product information from file...
    Reading language and territory information from file...
    Reading language information from applUS.txt ...
    Temporarily resetting CLASSPATH to:
    "/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
    Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
    Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/java/util/collections/Comparator
    AD Worker error:
    The above program failed. See the error messages listed
    above, if any, or see the log and output files for the program.
    Time when worker failed: Tue Jun 23 2009 00:14:02
    Please let me know any solution
    Thanks in advance
    Regards,
    Bhanu Chander.

    Hi,
    As a part of R12 upgrade.
    once The Installation creates APPL_TOP, COMMON_TOP, INST_TOP and 10g Oracle Home
    Now we are connected to R12 application.
    Applied patch AD.A 4502962.
    Run the American English upgrade patch driver
    cd $AU_TOP/patch/115/driver
    adpatch options=nocopyportion,nogenerateportion
    Please enter the name of your AutoPatch driver file: u4440000.drv
    This patch doesn't have readme it will be under cd $AU_TOP/patch/115/driver
    Thanks,
    Bhanu Chander

Maybe you are looking for

  • How do I transfer photos from IPad Air to a memory stick

    How do I transfer photos from my IPad Air to a memory stick

  • From design to print

    I've been working with an 11x17 spread booklet layout within InDesign (brochure) and may be stuck in a bad habit. The majority of my work lately has been starting with RAW photography (after edits) saved as 300dpi hi-res psd files & placed in my spre

  • Is there a quicktime version before 7.0 that is downloadable

    I have accidentally removed my Quicktime from my add/remove programs and I didn't realize that I need this to open up itunes. Now, as I am trying to download it back, the only version that I find is quicktime 7.0 which requires windows xp or vista, w

  • Attachment list in FB03 using methods/FM's..

    hi, I have a requirement to replicate the derivation of the 'Attachment List' for an accounting document in transaction FB03. Is there any standard FM available for the same??? The approach that i have tried out is, i debugged the standard SAP code f

  • I simply need help placing my FCP sequence on DVD - The basics

    Hello All, I've completed a sequence on FCP that I would like to place on DVD. I have followed the instructions in Final Cut Pro - Beyond the Basics, but apparently I'm not. The files are showing up on the DVD, but the file transfer process never sto