Applying patches without pre-requisites

Hi,
What effect does it have when applying patches without pre-requisites.
As in R12 no pre-requisites are checked if we miss any pre-requisite what effect will it have in the system?

Hi,
It is a must you apply the pre-requisite patches.
we miss any pre-requisite what effect will it have in the system?
Pre-requisite patches are delivered in some cases in order to rectify bugs that have been a consequent of the patch that is being applied. Or in some cases, pre-requisite patches are applied as they act as a mandatory patches in certain cases.
There are probabilities that the patches may not fix your respective issues if the pre-requisite patches are missed. It is always recommended a MUST, you refer the README and apply the pre-requisite patches.
HTH!,
Thanks &
Best Regards,

Similar Messages

Apply patch without database

Hi, I install oracle 11.2.0.1 software without db to my os.
Before creating a new database I want to apply the patches which this version needs.
Is this possible or should I create db and apply the patches later? In patch document,
it mentions the steps as I already have db. Thanks.

efendicans wrote:
I won't move the db. I will create a new one and import a schema with datapump from another db(10.2.0.2). As I understand from your replies I can patch binaries, create db and then import schema(without applying the db steps in patch document). Am I right? Thank you.Again, it depends on how you create the database. Go through the dbca wizard and select "custom" instead of one of the pre-defined databases. When you choose "custom", the script that gets generated to create your database starts with nothing and does a CREATE DATABASE. So your database is created from the git-go with the patched system. If you chose one of the pre-defined database types, it gets created by restoring a 'seed' database that was most likely created at the base level, so would need to have the database portion of any patches applied.
I never use the pre-defined databases, for this very reason.
(PS it would be very educational for you to go through dbca twice, once for a pre-defined db, and once for a custom. At the end, simply select 'create scripts' WITHOUT actually creating the database. Then study the scripts.)

Apply patch without CSI? (testing)

Hi,
I'm a recent(-ish...last July) grad and currently going through Oracle docs/ppts & trying things out to try and make up for some of that "2 years work experience" requirement that all junior DBA roles seem to have. I'm currently going through the 2 day guide & reached the end (patching) but metalink asks me for a CSI =( alternatives or do I just have to upgrade from 10.2 to 11 instead?
Mike

. I'm currently going through the 2 day guide & reached the end (patching) but metalink asks me for a CSI =( alternatives or do I just have to upgrade from 10.2 to 11 instead?I didnt get exactly what you are saying
does It mean, while installation /upgrade its asked CSI ?
Of course if you do not have you can ignore(you wont be having support) later also you can configure by using (OCM - oracle configuration manager)

Getting pre-requisite while applying patch.

Hi All,
I am in the process of applying a patch 9114911.
While applying a patch i got a below error.
Missing prerequisite codelevel for entity 'atg_pf'.
This patch requires the following codelevel or higher: 'R12.ATG_PF.B.3'.
The current on-site codelevel for the entity 'atg_pf' is : 'R12.ATG_PF.B.1'.
After that i apply a patch 9239089, still i am getting an error.
When i searched on metalink, I found the Patch 8919491.
Is Patch 8919491, the correct pre-requisute patch.
Your assistance in this regards is much appreciated.
Thanks and Regards,

After that i apply a patch 9239089, still i am getting an error.
When i searched on metalink, I found the Patch 8919491.
Is Patch 8919491, the correct pre-requisute patch.
You need to apply Patch 8919491 in addition to Patch 9239089.
Thanks,
Hussein

Query on AD utility "admrgpch". Will it take care of pre-requisite patches?

Hi
The question is for a Oracle Apps 11.5.10.2 release.
I want to know if we use "admrgpch" to merge all the patches, including the pre-requisite patches also into a single patch will it take care that a pre-requisite patch is installed FIRST and then it's relating patch??
Any help is highly appreciated.
Many Thanks
Ramana

Unless you are intimately familiar with the contents of your patches (files and file versions) and the file versions of the patched objects on your filesystem, you will likely not be able to determine if a failure in the patch application was due to a prerequisite patch contribution or part of the main patch you are applying because you apply one unified driver of all merged patches.
If you read and understand the contents of all the patch readmes you are applying, you have better than a 98% chance of the merged patch applying successfully. The larger and newer the patch is, the more likely there will be some missed prerequisite in the patch documentation.
I prefer to patch interactively passing all options and defaultsfile.txt entries on the command line because I am paranoid, and do not like to wait for the patch to restart upon a failure, when I can safely ignore or skip the failure. If you have a failure, copy and paste the failed object name into Metalink and search for knowledge base notes regarding that file. It is likely a known issue with a clear workaround. You should do the same research for newly created invalid objects after patching. Usually you will have failure uploading or compiling a file due to some code mismatch on your filesystem, and looking up the object and applying a newer version of the failed object usually allows it to load correctly, or compile in the case of a form or form library.

Query Forms patch 14614795 readme pre-requisites

Hi All,
Customer is getting FRM-92095: Oracle JInitiator version too low. Please install version 1.1.8.2" while using JRE1.7.0.21 .
After checking steve chan blog , https://blogs.oracle.com/stevenChan/entry/resolving_jinitiator_version_too_low came to know , patch 14614795 would solve this issue .
I am not interested in applying the bundle patch right now , so if i want to go with this (14614795 ) , i can see in 14614795 readme the below content as pre-requisite .
NOTE:
# 1. Please ensure the patch for bug 9593176 is already applied before you proceed.
# 2. Upgrade to the latest OUI 10.1 by downloading and installing the same from bug 6640838
Now we are on 12.1.3 + 11.1.0.7(db) , do we really need to apply 9593176 ? if i we need to apply this then probably going for the bundle patch is very much preferable is it (14825718) ?
Regards,
Naga.

Yes you need to apply the pre-req patches listed, these are mandatory requirements
Per note 393931.1 "Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite Release 12" the requirement is listed as:
"Oracle forms 10.1.2.3 or higher with Patch 14614795 or later (See Document 437878.1 titled, 'Upgrading OracleAS 10g Forms and Reports in Oracle E-Business Suite Release 12' for the latest available forms patches)"
So you can apply the patches listed in Note 437878.1 as an alternative, which will also get you onto all the latest code, so this may be the prefered option for you
Hope this helps
Mike

Failing all pre-requisite checks for 11.2.0.2.0 RAC on HP-UX Itanium 64

Hi Guys,
For Typical OR Advanced Grid Installation (GUI), all pre-requisites are failing on both nodes, like memory, swap, node reachability, groups, user & lot more.....
But when I try to check Pre-requisite from command line, everything seems to be ok.
This is what the output...
$ ./runcluvfy.sh stage -pre crsinst -n sph1erp,sph2erp -fixup -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "sph1erp"
Destination Node Reachable?
sph1erp yes
sph2erp yes
Result: Node reachability check passed from node "sph1erp"
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
sph2erp passed
sph1erp passed
Result: User equivalence check passed for user "oracle"
Checking node connectivity...
Checking hosts config file...
Node Name Status Comment
sph2erp passed
sph1erp passed
Verification of the hosts config file successful
Interface information for node "sph2erp"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
lan2 10.10.16.51 10.10.16.48 10.10.16.51 10.10.1.12 78:AC:C0:8A:07:76 1500
lan900 10.10.1.174 10.10.0.0 10.10.1.174 10.10.1.12 78:AC:C0:8A:07:6E 1500
Interface information for node "sph1erp"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
lan2 10.10.16.50 10.10.16.48 10.10.16.50 10.10.1.12 3C:4A:92:48:71:BE 1500
lan900 10.10.1.173 10.10.0.0 10.10.1.173 10.10.1.12 3C:4A:92:48:71:B6 1500
Check: Node connectivity of subnet "10.10.16.48"
Source Destination Connected?
sph2erp[10.10.16.51] sph1erp[10.10.16.50] yes
Result: Node connectivity passed for subnet "10.10.16.48" with node(s) sph2erp,sph1erp
Check: TCP connectivity of subnet "10.10.16.48"
Source Destination Connected?
sph1erp:10.10.16.50 sph2erp:10.10.16.51 passed
Result: TCP connectivity check passed for subnet "10.10.16.48"
Check: Node connectivity of subnet "10.10.0.0"
Source Destination Connected?
sph2erp[10.10.1.174] sph1erp[10.10.1.173] yes
Result: Node connectivity passed for subnet "10.10.0.0" with node(s) sph2erp,sph1erp
Check: TCP connectivity of subnet "10.10.0.0"
Source Destination Connected?
sph1erp:10.10.1.173 sph2erp:10.10.1.174 passed
Result: TCP connectivity check passed for subnet "10.10.0.0"
Interfaces found on subnet "10.10.0.0" that are likely candidates for VIP are:
sph2erp lan900:10.10.1.174
sph1erp lan900:10.10.1.173
Interfaces found on subnet "10.10.16.48" that are likely candidates for a private interconnect are:
sph2erp lan2:10.10.16.51
sph1erp lan2:10.10.16.50
Result: Node connectivity check passed
Check: Total memory
Node Name Available Required Comment
sph2erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
sph1erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
Result: Total memory check passed
Check: Available memory
Node Name Available Required Comment
sph2erp 53.3556GB (5.5947372E7KB) 50MB (51200.0KB) passed
sph1erp 52.2323GB (5.47695E7KB) 50MB (51200.0KB) passed
Result: Available memory check passed
Check: Swap space
Node Name Available Required Comment
sph2erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
sph1erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
Result: Swap space check passed
Check: Free disk space for "sph2erp:/var/tmp/"
Path Node Name Mount point Available Required Comment
/var/tmp/ sph2erp /var 13.8074GB 1GB passed
Result: Free disk space check passed for "sph2erp:/var/tmp/"
Check: Free disk space for "sph1erp:/var/tmp/"
Path Node Name Mount point Available Required Comment
/var/tmp/ sph1erp /var 13.8158GB 1GB passed
Result: Free disk space check passed for "sph1erp:/var/tmp/"
Check: User existence for "oracle"
Node Name Status Comment
sph2erp exists(199) passed
sph1erp exists(199) passed
Checking for multiple users with UID value 199
Result: Check for multiple users with UID value 199 passed
Result: User existence check passed for "oracle"
Check: Group existence for "oinstall"
Node Name Status Comment
sph2erp exists passed
sph1erp exists passed
Result: Group existence check passed for "oinstall"
Check: Group existence for "dba"
Node Name Status Comment
sph2erp exists passed
sph1erp exists passed
Result: Group existence check passed for "dba"
Check: Membership of user "oracle" in group "oinstall" [as Primary]
Node Name User Exists Group Exists User in Group Primary Comment
sph2erp yes yes yes yes passed
sph1erp yes yes yes yes passed
Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed
Check: Membership of user "oracle" in group "dba"
Node Name User Exists Group Exists User in Group Comment
sph2erp yes yes yes passed
sph1erp yes yes yes passed
Result: Membership check for user "oracle" in group "dba" passed
Check: Run level
Node Name run level Required Comment
sph2erp 3 3 passed
sph1erp 3 3 passed
Result: Run level check passed
Check: Hard limits for "maximum open file descriptors"
Node Name Type Available Required Comment
sph2erp hard 63488 63488 passed
sph1erp hard 63488 63488 passed
Result: Hard limits check passed for "maximum open file descriptors"
Check: Soft limits for "maximum open file descriptors"
Node Name Type Available Required Comment
sph2erp soft 1024 1024 passed
sph1erp soft 63488 1024 passed
Result: Soft limits check passed for "maximum open file descriptors"
Check: Hard limits for "maximum user processes"
Node Name Type Available Required Comment
sph2erp hard 3687 3686 passed
sph1erp hard 3687 3686 passed
Result: Hard limits check passed for "maximum user processes"
Check: Soft limits for "maximum user processes"
Node Name Type Available Required Comment
sph2erp soft 3687 2047 passed
sph1erp soft 3687 2047 passed
Result: Soft limits check passed for "maximum user processes"
Check: System architecture
Node Name Available Required Comment
sph2erp ia64 ia64 passed
sph1erp ia64 ia64 passed
Result: System architecture check passed
Check: Kernel version
Node Name Available Required Comment
sph2erp HP-UX B.11.31 B.11.31 passed
sph1erp HP-UX B.11.31 B.11.31 passed
Result: Kernel version check passed
Check: Kernel parameter for "ksi_alloc_max"
Node Name Configured Required Comment
sph2erp 32768 32768 passed
sph1erp 32768 32768 passed
Result: Kernel parameter check passed for "ksi_alloc_max"
Check: Kernel parameter for "executable_stack"
Node Name Configured Required Comment
sph2erp 0 0 passed
sph1erp 0 0 passed
Result: Kernel parameter check passed for "executable_stack"
Check: Kernel parameter for "max_thread_proc"
Node Name Configured Required Comment
sph2erp 1024 1024 passed
sph1erp 1024 1024 passed
Result: Kernel parameter check passed for "max_thread_proc"
Check: Kernel parameter for "maxdsiz"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "maxdsiz"
Check: Kernel parameter for "maxdsiz_64bit"
Node Name Configured Required Comment
sph2erp 2147483648 2147483648 passed
sph1erp 2147483648 2147483648 passed
Result: Kernel parameter check passed for "maxdsiz_64bit"
Check: Kernel parameter for "maxssiz"
Node Name Configured Required Comment
sph2erp 134217728 134217728 passed
sph1erp 134217728 134217728 passed
Result: Kernel parameter check passed for "maxssiz"
Check: Kernel parameter for "maxssiz_64bit"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "maxssiz_64bit"
Check: Kernel parameter for "maxuprc"
Node Name Configured Required Comment
sph2erp 3686 3686 passed
sph1erp 3686 3686 passed
Result: Kernel parameter check passed for "maxuprc"
Check: Kernel parameter for "msgmni"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "msgmni"
Check: Kernel parameter for "msgtql"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "msgtql"
Check: Kernel parameter for "ncsize"
Node Name Configured Required Comment
sph2erp 35840 35840 passed
sph1erp 35840 35840 passed
Result: Kernel parameter check passed for "ncsize"
Check: Kernel parameter for "shmmax"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "shmmax"
Check: Kernel parameter for "shmmni"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "shmmni"
Check: Kernel parameter for "shmseg"
Node Name Configured Required Comment
sph2erp 512 512 passed
sph1erp 512 512 passed
Result: Kernel parameter check passed for "shmseg"
Check: Kernel parameter for "tcp_smallest_anon_port"
Node Name Configured Required Comment
sph2erp 9000 9000 passed
sph1erp 9000 9000 passed
Result: Kernel parameter check passed for "tcp_smallest_anon_port"
Check: Kernel parameter for "tcp_largest_anon_port"
Node Name Configured Required Comment
sph2erp 65500 65500 passed
sph1erp 65500 65500 passed
Result: Kernel parameter check passed for "tcp_largest_anon_port"
Check: Kernel parameter for "udp_smallest_anon_port"
Node Name Configured Required Comment
sph2erp 9000 9000 passed
sph1erp 9000 9000 passed
Result: Kernel parameter check passed for "udp_smallest_anon_port"
Check: Kernel parameter for "udp_largest_anon_port"
Node Name Configured Required Comment
sph2erp 65500 65500 passed
sph1erp 65500 65500 passed
Result: Kernel parameter check passed for "udp_largest_anon_port"
Check: Package existence for "OS-Core-B.11.31( ia64)"
Node Name Available Required Comment
sph2erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
sph1erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
Result: Package existence check passed for "OS-Core-B.11.31( ia64)"
Check: Operating system patch for "Patch PHKL_38938"
Node Name Applied Required Comment
sph2erp Patch PHKL_39646 Patch PHKL_38938 passed
sph1erp Patch PHKL_39646 Patch PHKL_38938 passed
Result: Operating system patch check passed for "Patch PHKL_38938"
Check: Operating system patch for "Patch PHKL_39351"
Node Name Applied Required Comment
sph2erp Patch PHKL_40207 Patch PHKL_39351 passed
sph1erp Patch PHKL_40207 Patch PHKL_39351 passed
Result: Operating system patch check passed for "Patch PHKL_39351"
Check: Operating system patch for "Patch PHSS_36354"
Node Name Applied Required Comment
sph2erp Patch PHSS_40546 Patch PHSS_36354 passed
sph1erp Patch PHSS_40546 Patch PHSS_36354 passed
Result: Operating system patch check passed for "Patch PHSS_36354"
Check: Operating system patch for "Patch PHSS_37042"
Node Name Applied Required Comment
sph2erp Patch PHSS_37042 Patch PHSS_37042 passed
sph1erp Patch PHSS_37042 Patch PHSS_37042 passed
Result: Operating system patch check passed for "Patch PHSS_37042"
Check: Operating system patch for "Patch PHSS_37959"
Node Name Applied Required Comment
sph2erp Patch PHSS_40804 Patch PHSS_37959 passed
sph1erp Patch PHSS_40804 Patch PHSS_37959 passed
Result: Operating system patch check passed for "Patch PHSS_37959"
Check: Operating system patch for "Patch PHSS_39094"
Node Name Applied Required Comment
sph2erp Patch PHSS_40538 Patch PHSS_39094 passed
sph1erp Patch PHSS_40538 Patch PHSS_39094 passed
Result: Operating system patch check passed for "Patch PHSS_39094"
Check: Operating system patch for "Patch PHSS_39100"
Node Name Applied Required Comment
sph2erp Patch PHSS_40540 Patch PHSS_39100 passed
sph1erp Patch PHSS_40540 Patch PHSS_39100 passed
Result: Operating system patch check passed for "Patch PHSS_39100"
Check: Operating system patch for "Patch PHSS_39102"
Node Name Applied Required Comment
sph2erp Patch PHSS_41496 Patch PHSS_39102 passed
sph1erp Patch PHSS_41496 Patch PHSS_39102 passed
Result: Operating system patch check passed for "Patch PHSS_39102"
Check: Operating system patch for "Patch PHSS_38141"
Node Name Applied Required Comment
sph2erp Patch PHSS_38141 Patch PHSS_38141 passed
sph1erp Patch PHSS_38141 Patch PHSS_38141 passed
Result: Operating system patch check passed for "Patch PHSS_38141"
Check: Operating system patch for "Patch PHCO_40381"
Node Name Applied Required Comment
sph2erp Patch PHCO_40381 Patch PHCO_40381 passed
sph1erp Patch PHCO_40381 Patch PHCO_40381 passed
Result: Operating system patch check passed for "Patch PHCO_40381"
Check: Operating system patch for "Patch PHKL_38038"
Node Name Applied Required Comment
sph2erp Patch PHKL_41005 Patch PHKL_38038 passed
sph1erp Patch PHKL_41005 Patch PHKL_38038 passed
Result: Operating system patch check passed for "Patch PHKL_38038"
Checking for multiple users with UID value 0
Result: Check for multiple users with UID value 0 passed
Check: Current group ID
Result: Current group ID check passed
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
Network Time Protocol(NTP) configuration file not found on any of the nodes. Oracle Cluster Time Synchronization Service(CTSS) can be used instead of NTP for time synchronization on the cluster nodes
No NTP Daemons or Services were found to be running
Result: Clock synchronization check using Network Time Protocol(NTP) passed
Checking Core file name pattern consistency...
Core file name pattern consistency check passed.
Checking to make sure user "oracle" is not in "root" group
Node Name Status Comment
sph2erp does not exist passed
sph1erp does not exist passed
Result: User "oracle" is not part of "root" group. Check passed
Check default user file creation mask
Node Name Available Required Comment
sph2erp 022 0022 passed
sph1erp 022 0022 passed
Result: Default user file creation mask check passed
Checking consistency of file "/etc/resolv.conf" across nodes
Node Name Status
sph2erp passed
sph1erp passed
The DNS response time for an unreachable node is within acceptable limit on all nodes
File "/etc/resolv.conf" is consistent across nodes
Check: Time zone consistency
Result: Time zone consistency check passed
Checking settings of device file "/dev/async"
Node Name Available Comment
sph2erp yes failed (incorrect setting for minor number.)
sph1erp yes failed (incorrect setting for minor number.)
Result: Check for settings of device file "/dev/async" failed.
Starting check for The SSH LoginGraceTime setting ...
WARNING:
PRVE-0038 : The SSH LoginGraceTime setting on node "sph2erp" may result in users being disconnected before login is completed
PRVE-0038 : The SSH LoginGraceTime setting on node "sph1erp" may result in users being disconnected before login is completed
Check for The SSH LoginGraceTime setting passed
Fixup information has been generated for following node(s):
sph2erp,sph1erp
Please run the following script on each node as "root" user to execute the fixups:
'/tmp/CVU_11.2.0.2.0_oracle/runfixup.sh'
Pre-check for cluster services setup was unsuccessful on all the nodes.
What could be the issue ????
Any help would be appreciated...
Regards,
Manish

Started with Grid Installation. Copying Software to remote node & linking libraries were successfully without any issue (upto 76%). But got issue while executing root.sh on Node1
sph1erp:/oracle/11.2.0/grid #sh root.sh
Running Oracle 11g root script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /oracle/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /oracle/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
OLR initialization - successful
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-2672: Attempting to start 'ora.mdnsd' on 'sph1erp'
CRS-2676: Start of 'ora.mdnsd' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'sph1erp'
CRS-2676: Start of 'ora.gpnpd' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'sph1erp'
CRS-2672: Attempting to start 'ora.gipcd' on 'sph1erp'
CRS-2676: Start of 'ora.gipcd' on 'sph1erp' succeeded
CRS-2676: Start of 'ora.cssdmonitor' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'sph1erp'
CRS-2672: Attempting to start 'ora.diskmon' on 'sph1erp'
CRS-2676: Start of 'ora.diskmon' on 'sph1erp' succeeded
CRS-2676: Start of 'ora.cssd' on 'sph1erp' succeeded
ASM created and started successfully.
Disk Group OCRVOTE created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
CRS-4256: Updating the profile
Successful addition of voting disk ab847ed2b4f04f2dbfb875226d2bb194.
Successful addition of voting disk 85c05a5b30384f8dbff48cc069de7a7c.
Successful addition of voting disk 649196fbdd614f9cbf26a9a0e6670a6e.
Successful addition of voting disk 8815dfcee2e64f64bf00b9c76626ab41.
Successful addition of voting disk 8ce55fe5534f4f77bfa9f54187592707.
Successfully replaced voting disk group with +OCRVOTE.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE ab847ed2b4f04f2dbfb875226d2bb194 (/dev/oracle/ocrvote1) [OCRVOTE]
2. ONLINE 85c05a5b30384f8dbff48cc069de7a7c (/dev/oracle/ocrvote2) [OCRVOTE]
3. ONLINE 649196fbdd614f9cbf26a9a0e6670a6e (/dev/oracle/ocrvote3) [OCRVOTE]
4. ONLINE 8815dfcee2e64f64bf00b9c76626ab41 (/dev/oracle/ocrvote4) [OCRVOTE]
5. ONLINE 8ce55fe5534f4f77bfa9f54187592707 (/dev/oracle/ocrvote5) [OCRVOTE]
Located 5 voting disk(s).
Start of resource "ora.cluster_interconnect.haip" failed
CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'sph1erp'
CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
Start action for HAIP aborted
CRS-2674: Start of 'ora.cluster_interconnect.haip' on 'sph1erp' failed
CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'sph1erp'
CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'sph1erp' succeeded
CRS-4000: Command Start failed, or completed with errors.
Failed to start Oracle Clusterware stack
Failed to start High Availability IP at /oracle/11.2.0/grid/crs/install/crsconfig_lib.pm line 1046.
/oracle/11.2.0/grid/perl/bin/perl -I/oracle/11.2.0/grid/perl/lib -I/oracle/11.2.0/grid/crs/install /oracle/11.2.0/grid/crs/install/rootcrs.pl execution failed
sph1erp:/oracle/11.2.0/grid #
Last few lines from CRS Log for node 1, where error came
[ctssd(6467)]CRS-2401:The Cluster Time Synchronization Service started on host sph1erp.
2011-02-25 23:04:16.491
[oracle/11.2.0/grid/bin/orarootagent.bin(6423)]CRS-5818:Aborted command 'start for resource: ora.cluster_interconnect.haip 1 1' for resource 'ora.cluster_int
erconnect.haip'. Details at (:CRSAGF00113:) {0:0:178} in */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
2011-02-25 23:04:20.521
[ohasd(5513)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.cluster_interconnect.haip'. Details at (:CRSPE00111:) {0:0:178} in
*/oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
Few lines from */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
=====================================================================================================
2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Starting Probe for ip 169.254.74.54
2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Transitioning to Probe State
2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} [NetHAMain] thread stopping
2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} Thread:[NetHAMain]isRunning is reset to false here
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAMain]stop }
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} thread cleaning up
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} pausing thread
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} posting thread
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} [NetHAWork] thread stopping
2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} Thread:[NetHAWork]isRunning is reset to false here
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
2011-02-25 23:04:17.891: [ora.cluster_interconnect.haip][12] {0:0:178} [start] Start of HAIP aborted
2011-02-25 23:04:17.892: [   AGENT][12] {0:0:178} UserErrorException: Locale is
2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsnUtils::error Exception type=2 string=
CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
Start action for HAIP aborted
2011-02-25 23:04:17.893: [    AGFW][12] {0:0:178} sending status msg [CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the foll
owing error:
Start action for HAIP aborted
] for start for resource: ora.cluster_interconnect.haip 1 1
2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsn_agent::start }
2011-02-25 23:04:17.894: [    AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check {
2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check } - 0
2011-02-25 23:04:19.573: [    AGFW][10] {0:0:154} Agent received the message: AGENT_HB[Engine] ID 12293:669
2011-02-25 23:04:20.510: [ora.cluster_interconnect.haip][18] {0:0:178} [start] got lock
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] tryActionLock }
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] abort }
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] clsn_agent::abort }
2011-02-25 23:04:20.511: [    AGFW][18] {0:0:178} Command: start for resource: ora.cluster_interconnect.haip 1 1 completed with status: TIMEDOUT
2011-02-25 23:04:20.512: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init enter {
2011-02-25 23:04:20.513: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init exit }
2011-02-25 23:04:20.517: [    AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
2011-02-25 23:04:20.519: [ USRTHRD][8] {0:0:178} Ocr Context init default level 23886304
2011-02-25 23:04:20.519: [ default][8]clsvactversion:4: Retrieving Active Version from local storage.
[   CLWAL][8]clsw_Initialize: OLR initlevel [70000]
Few lines from */oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
=====================================================================================================
2011-02-25 23:04:21.627: [UiServer][30] {0:0:180} Done for ctx=6000000002604ce0
2011-02-25 23:04:21.642: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:26.139: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:26.139: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:26.973: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:26.973: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:26.992: [UiServer][30] {0:0:181} processMessage called
2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending message to PE. ctx= 6000000001b440f0
2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending command to PE: 67
2011-02-25 23:04:26.994: [   CRSPE][29] {0:0:181} Processing PE command id=173. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:26.997: [UiServer][30] {0:0:181} Done for ctx=6000000001b440f0
2011-02-25 23:04:27.012: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:31.135: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:31.135: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:32.318: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:32.318: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:32.332: [UiServer][30] {0:0:182} processMessage called
2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending message to PE. ctx= 6000000001b45ef0
2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending command to PE: 68
2011-02-25 23:04:32.334: [   CRSPE][29] {0:0:182} Processing PE command id=174. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:32.338: [UiServer][30] {0:0:182} Done for ctx=6000000001b45ef0
2011-02-25 23:04:32.352: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:36.155: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:36.155: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:37.683: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:37.683: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:37.702: [UiServer][30] {0:0:183} processMessage called
2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending message to PE. ctx= 6000000002604ce0
2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending command to PE: 69
2011-02-25 23:04:37.704: [   CRSPE][29] {0:0:183} Processing PE command id=175. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:37.708: [UiServer][30] {0:0:183} Done for ctx=6000000002604ce0
2011-02-25 23:04:37.722: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:41.156: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:41.156: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
What could be the issue ????
Experts Please help me. Doing setup for the PRoduction Env...
Do response ASAP...... Thanks
Regards,
Manish

Apply patch during oracle upgrade

Hi Folks
I`m upgrading 10G databases to 11.2.0.3. Right now we have installed the 11.2.0.3 software on the severs. We have downloaded PSU, which converts present 11.2.0.3.0 to 11.2.0.3.3.
Here`s my question.
The pre-requisite to apply this patch is that opatch version of db has to be in 11.2.0.3.
I checked my opatch version in some 10G databases, it is with 10.2.0.4.0. How can I apply new patch as my patch version is only 10.2.0.4.0.
New environment variables will be set to 11.2.0.3 during applying patch. But how to convert 10.2.0.4.0 patch to 11.2.0.3.0, so that I can apply my new patch.

You will need to install the latest version of OPatch on the 11.2.0.3 OH, then apply the PSU - see MOS Doc referenced above
HTH
Srini

Incorrect user and admin accounts showing when trying to apply patches

Hi folks,
I have completed a (rather painful) install of the "main" component of BPC version 7 on my clients' server, with a domain user as the System Admin, and local accounts for the Admin and User accounts.
This is a single-server install.
Now, when I try to apply the two patches to make it "officially" SP4, on the page that asks for my passwords it has filled in my IDs incorrectly.
So, my System Admin ID is showing correct as <domain>\sysadmin, but my admin and user are also showing as <domain>\bpcadmin and <domain>\bpcuser, rather than as they SHOULD appear: <local machine name>\bpcadmin and <local machine name>\bpcuser.
I have no idea what is happening, but I'm guessing it is down to some COM+ object that hasn't updated properly for some reason.
I also had a problem with the ApShell application not being created, so I had to do this manually, which I know isn't normal. Also, there has been no database created for ApShell either.
I checked all the pre-requisites and made sure all user accounts were ready to use, etc, but is there anything anyone can think of that might be causing these problems?
Thanks very much.
Best wishes,
Jason
Update: I thought that it woud be a good idea to uninstall BPC and start again, rather than amending components and databases manually, which shouldn't be necessary. Any tips on cleaning up the resulting mess would be most welcome!

Thanks Tony!
I reinstalled the application with the Sys Admin right the way through, and it accepts it, but I get another error:
[click here for picture|http://picasaweb.google.com/lh/photo/JFFxet7nUJcoeHY9hAQOcQ?feat=directlink]
This is weird as the database error shows C:\... when actually the default database is on D:\Data...
If I click on OK, I then get this much more complicated message:
[click here for picture|http://picasaweb.google.com/lh/photo/uM0LmGaQgJx4VseRqwXnsQ?feat=directlink]
I'm not even going try and interpret that one - but some searches on the internet haven't been very useful.
Any ideas? I'm almost at the point of getting the client to uninstall and reinstall SQL Server again, as I've been having this problem for at least 24 hours. But I'm keen to avoid this if possible, so any help wuld be appreciated.
Cheers,
Jason

Pre requisites for DBI family packG (7.3)

Dear Hussein,
In the readme file of patch 5404886 (DBI Family pack G (7.3)). In section 5: STEP 4 it says
"Apply additional pre requisite patches for daily business intelligence for financials".
Are the patches must.
O/S AIX 5.3
11.5.10.2
9.2.0.8
If i apply any family pack, there is a long list of pre-requisite patches. How can we know if we need to apply them or not.
Thank you
Regards
Taher
Edited by: user11970143 on Mar 31, 2010 10:42 AM

Taher,
See the following from "Oracle® Applications Maintenance Utilities Release 11i (11.5.10.2)", Page 4-11 Compile flexfield data.
Compiles flexfield data structures in Oracle Application Object Library (FND) tables. Choose this task after you apply a patch that changes the setup of flexfields. Patches usually indicate when you should perform this step.
Flexfields automatically compile data when you use them for the first time, so running this task is not required. However, compiling flexfield data at a specific time (for example, when system use is low), rather than automatically at first use, can alleviate potential runtime performance issues.
Regards,
Hussein

Ckeck For File: Checking RSEINBQUEUE Pre-Requisites

More of a BASIS question really, but I'd like to know what options I have for checking certain pre-requisites before processing XI sourced files using program RSEINBQUEUE?
This background job is currently scheduled for 18:50 each night, but I really want to check either files at the Windows directory level or preferably the existence of the XI processing having taken place.
Is this possible?
Thanks, Robert.

Taher,
See the following from "Oracle® Applications Maintenance Utilities Release 11i (11.5.10.2)", Page 4-11 Compile flexfield data.
Compiles flexfield data structures in Oracle Application Object Library (FND) tables. Choose this task after you apply a patch that changes the setup of flexfields. Patches usually indicate when you should perform this step.
Flexfields automatically compile data when you use them for the first time, so running this task is not required. However, compiling flexfield data at a specific time (for example, when system use is low), rather than automatically at first use, can alleviate potential runtime performance issues.
Regards,
Hussein

Pre-requisites for running oracle forms 11G

What are the pre-requisits for running Oracle forms 11G?

Ok - where to begin?
From the beginning....
<blockquote>1. There are prerequisites for nearly every Oracle product. If you have not read the Installation Guide and Systems Requirements Guide you likely are missing something. Docs are [URL http://docs.oracle.com/cd/E24269_01/index.htm]here
2. If you followed the installation guide and completed the installation without error, the basic product works out of the box without any configuration changes. Don't start tweaking unless you understand the change.
3. In order to use an application server of any kind, you need to ensure it is running.
4. If you have chosen the "Development" installation type (applies to 11.1.2 only) then you will not have an HTTP Server and it is not needed. Your listener will be the WLS managed server (usually port 9001).
5. If you have chosed the "Deployment" installation type then you will have HTTP Server. You can access your Forms application via the HTTP Server Listen port (usually 8888) or the WLS_FORMS port.</blockquote>
To the issue that started this post... "+*Page cannot be displayed*+"
This error is either caused as a result of there being no listener running, specifically the HTTP Server or the wrong URL was entered in the browser, or the hostname used in the URL does not map to the correct machine where the listener is running. If you have installed and are testing on your local machine and that machine does not have a static IP address and/or a DNS registered name then fixing these issues would be a few of those "prerequisite" steps I mentioned. This is documented here:
http://docs.oracle.com/html/E18558_01/fusion_requirements.htm#BABFHBID
The above configuration needs to be completed before the installation is started.
To the next issue or change in error message: "+*Failure of server APACHE bridge: No backend server available for connection...*+"
This means that HTTP Server (specifically mod_wls) is unable to contact WLS_FORMS. This could be because WLS_FORMS is not running or because of those prereq steps noted above or a variety of other things related to not following the instructions. Refer to MyOracleSupport Note 1304095.1 for more details about this error.
Finally, as for the need for a JRE, you can do this either before you attempt to run a form or allow the autoinstall feature of the browser perform the installation. However, as Craig mentioned, you would be better off installing the latest version which is 1.6.0_33. You can change your configuration to automatically do this, but if you are new to FusionMiddleware and/or Forms doing the JRE installation manually at this point is probably a good idea. I also recommend starting with Internet Explorer because likely some config changes will be necessary to get it working.
As I mentioned, for the most part, the installation should work out of the box without changes. I would recommend getting the default form (test.fmx) running before attempting to make too many changes.
(If you chose the Deployment install type) http://youMachine:8888/forms/frmservlet?form=test
(If you chose the Development install type) http://youMachine:9001/forms/frmservlet?form=test
.

Oracle Universal Installer not starting, failing on pre-requisites

--[This is where the application server 10g Forms and Reports (9.0.4) cd resides for Solaris version 5.9]
/data02/FMSinvoice/appsFR904/INSTALL/SOLARIS
--[The runInstaller is using oraparam.ini from the following temp location (/data02/FMSinvoice/appsFR904...). This is a patch which allows above cd to run on Soalris ver 5.10]
bash-3.2$ runInstaller -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/oraparam.ini
Debug1
encoding = UTF-8
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB. Actual 14791MB Passed
Checking Temp space: must be greater than 150 MB. Actual 12596 MB Passed
All installer requirements met.
Checking if CPU speed is above 250 MHz. Actual 1200 MHz Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-08-29_03-54-34PM. Please wait ...sh: /apps/oracle/product/9.2.0/oui/bin/unzip: not found
Error in writing to directory /tmp/OraInstall2012-08-29_03-54-34PM. Please ensure that this directory is writable and has atleast 75 MB of disk space. Installation cannot continue.
The tmp seems to have enough space...
bash-3.2$ df -kh
Filesystem size used avail capacity Mounted on
/dev/dsk/c3t201500A0B826A22Cd4s0
9.8G 5.2G 4.6G 54% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 12G 1.7M 12G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
sharefs 0K 0K 0K 0% /etc/dfs/sharetab
/platform/sun4u-us3/lib/libc_psr/libc_psr_hwcap1.so.1
9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/libc_psr.so.1
/platform/sun4u-us3/lib/sparcv9/libc_psr/libc_psr_hwcap1.so.1
9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/sparcv9/libc_psr.so.1
fd 0K 0K 0K 0% /dev/fd
/dev/dsk/c3t201500A0B826A22Cd4s3
9.8G 409M 9.3G 5% /var
swap 12G 1.0M 12G 1% /tmp
swap 12G 80K 12G 1% /var/run
/dev/dsk/c3t201500A0B826A22Cd4s4
9.8G 4.6G 5.2G 47% /apps
/dev/dsk/c3t201500A0B826A22Cd0s5
128G 73G 53G 58% /data01
/dev/dsk/c3t201500A0B826A22Cd1s6
262G 13G 247G 5% /data02/FMSinvoice
Can someone help kick off the OUI installer. Our customer if getting impatient in not getting it to run. Any help appreicaited
Thanks

Thanks for the replies...
FYI.
I have cloned an Oracle 9i database on a DR test server.
Now I am installing Oracle Application server 10g Forms and Reports (9.0.4) on Solaris 5.10
This is using a Oracle CD which is for Solaris 5.9 but using twp patches supplied by oracle to run the CD from. So it is able to run on Solaris 5.10. It has been done before but by some past DBA some 5 years ago. This is the first time I am attempting this being a new employee here.
I have implemented these suggestions.
Especially the fact that it was looking for a gunzip utuility which it couldn't find. To make it easirer Ij ust copied the gunzip utility to the place it was looking for, and renamed it unzip. As it was loooking for unzip
This worked and passed through.
Created the temp temp directory as welll so it would not have issues in not writting to the tmp directory.
The error I'm getting is below
bash-3.2$ pwd
/data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701
bash-3.2$ /data02/FMSinvoice/appsFR904/INSTALL/SOLARIS/RUNINSTA -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/ORAPARAM.INI
Starting Oracle Universal Installer ...
Checking requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10.
Actual 5.10 Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB.
Actual 14791MB Passed
Checking Temp space: must be greater than 150 MB.
Actual 252715 MB Passed
All requirements met.
Checking if CPU speed is above 250 MHz.
Actual 1200 MHz Passed
Checking monitor: must be configured to display at least 256 colors
^C Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo
Some optional pre-requisite checks have failed (see above). Continue? (y/n) [n] y
Preparing to launch Oracle Universal Installer from /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM. Please wait ...The Java RunTime Environment was not found at /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
I am running humingbird Exceed, and have also set the DISPLAY to my screen.
FYI I am running this from home so the 256 collours error would probably be ok if I did it from work (as I will on Monday)
However I would prbably still get the java error. Should this not be resolved using Exceed though?

Error installing Service Provider Foundation- pre-requisite for configuring Windows Azure Pack

We are trying to setup lab at our premises to get hands on with WAP and explore.
We are able to install all the pre-requisite software’s except the "Service Provider Foundation (SPF)" component. Using SPF we are trying to configure the WAP that is installed successfully.
Software installed on Target machine-
Win Server 2012 OS.
Server roles enabled on host-Hyper-V,IIS, WSUS, File and storage services.
SQl Server W2k12-sp1-Standard edition in mixed authentication mode.
SCVMM.
WAP.
Issue description:-
We try to run the 'Orchestatorsetup.exe' with both Local admin/domain admin account. Pre-requisite check during the installation of SPF is successful.
When we select "Install” button, Setup.exe is getting terminated halfway through abruptly.
We tried to analyze the attached error log file extract.
[061C:0F60][2014-12-02T12:30:03.146+05:30]: Applying package: Id.Setup.msi, action: Install, path: C:\ProgramData\Package Cache\{69344E86-7183-4384-A230-499E9914BE14}v7.2.1902.0\Microsoft.SystemCenter.Foundation.Setup.msi, arguments: ' INSTALLLOCATION="C:\inetpub"
SCVMMCHECKED="1" SCDPMCHECKED="0" SCOMCHECKED="0" SCSMCHECKED="0" WEBSITE_NAME="SPF" PORT_NUMBER="8090" SPECIFY_CERTIFICATE="0" CERTIFICATE_STORE="My" CERTIFICATE_SERIAL="1714309174975BA5442B9ADF17FB6657"
USE_SSL="1" SCVMM_APPPOOL_NAME="VMM" SCVMM_DIRECTORY_NAME="VMM" SCVMM_USERNAME_VALUE="NETWORK SERVICE" SCVMM_DOMAIN_VALUE="NT AUTHORITY" SCVMM_PASSWORD_VALUE="" SCADMIN_APPPOOL_NAME="Admin"
SCADMIN_DIRECTORY_NAME="Admin" SCADMIN_USERNAME_VALUE="NETWORK SERVICE" SCADMIN_DOMAIN_VALUE="NT AUTHORITY" SCADMIN_PASSWORD_VALUE="" SCPROVIDER_APPPOOL_NAME="Provider" SCPROVIDER_DIRECTORY_NAME="Provider"
SCPROVIDER_USERNAME_VALUE="NETWORK SERVICE" SCPROVIDER_DOMAIN_VALUE="NT AUTHORITY" SCPROVIDER_PASSWORD_VALUE="" SCUSAGE_APPPOOL_NAME="Usage" SCUSAGE_DIRECTORY_NAME="Usage" SCUSAGE_USERNAME_VALUE="NETWORK
SERVICE" SCUSAGE_DOMAIN_VALUE="NT AUTHORITY" SCUSAGE_PASSWORD_VALUE="" SCDPM_APPPOOL_NAME="DPM" SCDPM_DIRECTORY_NAME="DPM" SCDPM_USERNAME_VALUE="NETWORK SERVICE" SCDPM_DOMAIN_VALUE="NT AUTHORITY"
SCDPM_PASSWORD_VALUE="" DATABASE_SERVER="localhost" DATABASE_PORT="1433" DATABASE_EXISTS="False" DATABASE_NAME="SCSPFDB" DPM_SECURITYGROUPUSERS="WAPLABS\vmmadmin" VMM_SECURITYGROUPUSERS="WAPLABS\vmmadmin"
ADMIN_SECURITYGROUPUSERS="WAPLABS\vmmadmin" PROVIDER_SECURITYGROUPUSERS="WAPLABS\vmmadmin" USAGE_SECURITYGROUPUSERS="WAPLABS\vmmadmin" ARPSYSTEMCOMPONENT ="1"'
[061C:0F60][2014-12-02T12:30:24.948+05:30]: Error 0x80070643: Failed to install MSI package.
[061C:0F60][2014-12-02T12:30:24.949+05:30]: Error 0x80070643: Failed to execute MSI package.
[18C0:17D4][2014-12-02T12:30:24.950+05:30]: Error 0x80070643: Failed to configure per-machine MSI package.
[18C0:17D4][2014-12-02T12:30:24.952+05:30]: Error 0x80070643: Failed to execute MSI package.
[061C:0F60][2014-12-02T12:30:24.952+05:30]: Removing cached package: {69344E86-7183-4384-A230-499E9914BE14}v7.2.1902.0, from path: C:\ProgramData\Package Cache\{69344E86-7183-4384-A230-499E9914BE14}v7.2.1902.0\
[18C0:17D4][2014-12-02T12:30:24.957+05:30]: EverestBootstrapperApplication_ExecuteComplete
[18C0:17D4][2014-12-02T12:30:24.958+05:30]: MSI execution completed
[18C0:17D4][2014-12-02T12:30:24.963+05:30]: Installation finished
Workaround tried:-
1. As per the TechNet MS site changing the time zone to Pacific/London time zone. Tried it but issue persists.
2. Tried to run the setup.exe using domain account and local admin account.
Any help appreciated much..

UAC was turned off and installation was tried using local admin account. The error log suggested it was failing to create a firewall exception rule for 8090/UDP port. Windows Firewall service was enabled. SPF got installed successfully.
Thanks Darryl for helping us break the deadlock :)

Is it possible to do DST patch without reboot on Solaris 9

Hi - I have some machines that are difficult to schedule downtime on, and am
wondering if I can manually stop/start processes that are affected by
113225-08 and 112874-33 patches so that I could apply them without rebooting.
Is this possible?
Thanks very much for the help,
Judy

The reboot ensures that all processes are restarted.
Any processes that are started before the timezone patch is installed will not see the update.
So if nothing else, I'd want to restart cron...
Darren

Applying patches without pre-requisites

Similar Messages

Maybe you are looking for