Applying patches
hi experts,
what are the steps has to take after applying patches thru sdm tool ? give me in detail ,
thanq
Basha,
Applying Single Support Packages
Use
If you want to update only particular software components that are deployed on the system and do not want to apply complete support package stacks, you can apply single support packages. The import time is shorter for single support packages than for support package stacks. In addition, you can apply newer support packages of SAP software components that have been modified in the NWDI.
Before you can apply a support package of a given level, you have to update JSPM to the same level by applying it as a single support package.
The update of JSPM does not require a restart of the J2EE Engine and does not affect the system operation.
If you want to apply a support package stack, you must not use this procedure.
Prerequisites
● The settings of your system are according to note 723909.
● The AS Java and the database have been backed up. For more information, see Backing Up and Restoring AS Java.
● Directories and files have not been deleted, renamed, or created in the following directories and their subdirectories: /usr/sap/<SID>/SYS/exe and /usr/sap/<SID>/SYS/profile. Otherwise, JSPM cannot detect the kernel and the system profiles, and cannot be started. If a backup of the kernel and the system profiles has been required, it has been created in a different directory.
● If your database is MaxDB, the overwrite mode for the log area has been set. For more information, see Changing Log Settings.
● The support packages you want to apply have been downloaded to the global EPS inbox directory /usr/sap/trans/EPS/in. For more information about SAP products, see SAP Service Marketplace at service.sap.com/swdc.
● If you want to update the EP as a single support package, the SDM timeout for the automatic start/stop of the J2EE Engine has been increased to 2 hours. For more information about increasing the SDM timeout, see SDM Troubleshooting.
● The <SID>adm user has Read permissions for the global EPS inbox directory /usr/sap/trans/EPS/in.
● The database and the SDM repository have been synchronized. For more information, see JSPM Does Not Update the Versions of the Deployed Components.
● There is enough disk space. For more information, see Requirements for Free Disk Space.
Go through this...
http://help.sap.com/saphelp_nw2004s/helpdata/en/2e/03784278b66255e10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/628a9f93-0701-0010-48bb-b0d872345c15
Thanks,
Satya..
Similar Messages
-
Hello,
I have problem with applying patch on ACS 5.3. In release notes there is mentioned following command format:
acs patch install patch-name.tar.gpg repository repository-name
The problem is ACS 5.3 does't have this command syntax.
It does't have acs command.
Here is what i have trued:
acs/admin# patch install 5-3-0-40-1.tar.gpg rep
Do you want to save the current configuration ? (yes/no) [yes] ?
Generating configuration...
Saved the running configuration to startup successfully
% Manifest file not found in the bundle
repository rep
url ftp://172.30.5.217
user user password hash c7b11123e528660abea78d974339875394fbb234
Here is supported command that i found on ACS 5.3.
acs/admin# ?
Exec commands:
application Application Install and Administration
backup Backup system
backup-logs Backup system and application logs
clock Set the system clock
configure Enter configuration mode
copy Copy commands
debug Debugging functions (see also 'undebug')
delete Delete a file
dir List files on local filesystem
exit Exit from the EXEC
forceout Force Logout all the sessions of a specific system user
halt Shutdown the system
mkdir Create new directory
nslookup DNS lookup for an IP address or hostname
patch Install System or Application Patch
ping Ping a remote ip address
reload Reboot the system
restore Restore system
rmdir Remove existing directory
show Show running system information
ssh SSH to a remote ip address
tech TAC commands
telnet Telnet to a remote ip address
terminal Set terminal line parameters
traceroute Trace the route to a remote ip address
undebug Disable debugging functions (see also 'debug')
write Write running system information
acs/admin#Hi,
I find this odd, can you run a "show application"
Here is the output of my ACS -
Version information of installed applications
Cisco ACS VERSION INFORMATION
Version : 5.3.0.40.4
Internal Build ID : B.839.EVAL
Patches :
5-3-0-40-2
5-3-0-40-4
gdtsrv-acs5/admin# ?
Exec commands:
acs ACS control commands
acs-config ACS config mode
application Application Install and Administration
backup Backup system
backup-logs Backup system and application logs
clock Set the system clock
configure Enter configuration mode
copy Copy commands
debug Debugging functions (see also 'undebug')
delete Delete a file
dir List files on local filesystem
exit Exit from the EXEC
forceout Force Logout all the sessions of a specific system user
halt Shutdown the system
mkdir Create new directory
nslookup DNS lookup for an IP address or hostname
patch Install System or Application Patch
ping Ping a remote ip address
reload Reboot the system
restore Restore system
rmdir Remove existing directory
show Show running system information
ssh SSH to a remote ip address
tech TAC commands
telnet Telnet to a remote ip address
terminal Set terminal line parameters
traceroute Trace the route to a remote ip address
undebug Disable debugging functions (see also 'debug')
write Write running system information
Tarik Admani
*Please rate helpful posts* -
Hi All,
I am trying to apply a weblogic patch on SOA server but facing an error while applying the Opatch . I checked the accessibilty to opatch inventory by using the command % opatch lsinventory . This executed fine and there were no errors. But when I try applying the opatch I get the error -that some jars missing . Even if I replace the jars and try executing opatch again I face the same error . I googled a lot but couldnt find any solution . Please let me what can be done for solving this error .
D:\7337034>opatch apply -oh D:\product\10.1.3.1\OracleAS_1
Oracle Interim Patch Installer version 1.0.0.0.61
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
Oracle Home : D:\product\10.1.3.1\OracleAS_1
Oracle Home Inventory : D:\product\10.1.3.1\OracleAS_1\inventory
Central Inventory : C:\Program Files\oracle\inventory
from : N/A
OUI location : D:\product\10.1.3.1\OracleAS_1\oui
OUI shared library : D:\product\10.1.3.1\OracleAS_1\oui\lib\win32\oraInstalle
r.dll
Java location : "D:\product\10.1.3.1\OracleAS_1\jdk\jre\bin\java.exe"
Log file location : D:\product\10.1.3.1\OracleAS_1/.patch_storage/<patch ID>
/*.log
Creating log file "D:\product\10.1.3.1\oracleas_1\.patch_storage\7337034\Apply_7
337034_06-02-2009_13-39-26.log"
Provide your email address to be informed of security issues, install and
initiate Oracle Configuration Manager. Easier for you if you use your My
Oracle Support Email address/User Name.
Visit http://www.oracle.com/support/policies.html for details.
Email address/User Name: [email protected]
Provide your My Oracle Support password to receive security updates via your My
Oracle Support account.
Password (optional):
Password (optional):
Unable to establish a network connection to Oracle. If your systems require a
proxy server for outbound Internet connections, enter the proxy server details
in this format:
[<proxy-user>@]<proxy-host>[:<proxy-port>]
If you want to remain uninformed of critical security issues in your
configuration, enter NONE
Proxy specification: NONE
** Installing base package **
Deploying core - Version 10.3.1.0.0
Deploying engines - Version 10.2.7.1.0
Deploying metricdata - Version 10.2.4.0.3
Deploying scripts - Version 10.3.1.0.0
Oracle Configuration Manager has been configured in disconnected mode. If the
target ORACLE_HOME is running a database, please refer to the
"Post-installation Database Configuration" section of the OCM Installation
and Administration Guide
(http://www.oracle.com/technology/documentation/ocm.html) to complete the
installation.
View configuration data reports and access valuable configuration best
practices by going to My Oracle Support.
Backing up comps.xml ...
OPatch detected non-cluster Oracle Home from the inventory and will patch the lo
cal system only.
Please shut down Oracle instances running out of this ORACLE_HOME
(Oracle Home = d:\product\10.1.3.1\oracleas_1)
Is this system ready for updating?
Please respond Y|N >
y
Applying patch 7337034...
Patching jar files...
OPatch encounters the following issues during file patching:
The following java archives on Windows had problems with being patched:
1. orabpel.jar
[ object: DomainFilter.class ]
2. orabpel.jar
[ object: AdapterFrameworkListenerImpl$RoutingRuleXPathInfo.class ]
3. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
4. orabpel.jar
[ Couldn't make backup copy of file. ]
5. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
6. orabpel.jar
[ Couldn't make backup copy of file. ]
7. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
8. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
9. orabpel.jar
[ Couldn't make backup copy of file. ]
Replying 'Y' will terminate the patch installation immediately. It WILL NOT rest
ore any updates that have been performed to this point. It WILL NOT update the i
nventory.
Replying 'N' will update the inventory showing the patch has been applied.
NOTE: After replying either 'Y' or 'N' it is critical to review:
My Oracle Support Note 312767.1 How to rollback a failed Interim patch ins
tallation.
Do you want to STOP?
Please respond Y|N >
y
File Patching Error!
ERROR: OPatch failed during patching, possibly due to missing files.
OPatch returns with error code = 200Hi , I am facing the same issue.
were you able to resolve it.
please let me know if you were.
Many Thanks. -
Error while applying Patch 4960210
Hi,
I am trying to integrate oracle apps with Oracle EBS 12R and following Doc Id:376811.1 from metalink.
I have successfully installed patch 5983637, but when I try to install patch 4960210 on it, even though I stopped all the services on app server, i get the following error:
Certain files which need to be reinstalled by oracle universal installer are being used by one or more applications.
Please close any running applications before continuing.
NOTE: when I upgraded the existing OracleAS 10.1.2.0.2 Infrastructure to Oracle Identity Management 10g (10.1.4.0.1) I created a new oracle home and installed my components there (unknowingly), so not sure if this causing problem.
Not able to go further Please help..!!!!
ThanksHi,
As a part of R12 upgrade.
once The Installation creates APPL_TOP, COMMON_TOP, INST_TOP and 10g Oracle Home
Now we are connected to R12 application.
Applied patch AD.A 4502962.
Run the American English upgrade patch driver
cd $AU_TOP/patch/115/driver
adpatch options=nocopyportion,nogenerateportion
Please enter the name of your AutoPatch driver file: u4440000.drv
This patch doesn't have readme it will be under cd $AU_TOP/patch/115/driver
Thanks,
Bhanu Chander -
Error while applying patch to 12.1.3 from 12.1.1
Hi,
while I'm applying patch 9239090, I'm getting the following error:
The following Oracle Forms objects did not generate successfully:
au resource IEXFBALI.pll
au resource OKSACTEV.pll
au resource OKSAUDET.pll
au resource CSCUTILS.pll
au resource OKCEXEVT.pll
au resource OKCEXPOR.pll
au resource OKCKSRCH.pll
The following Oracle Forms objects did not generate successfuly:
iex forms/US IEXCUOVW.fmx
iex forms/US IEXRCALL.fmx
wms forms/US WMSLABEL.fmx
wsh forms/US WSHQSSUI.fmx
wsh forms/US WSHSTREF.fmx
wsh forms/US WSHFSTRX.fmx
and i have allready applied patch 9239089 before 9239090IEXCUOVW.fmx
Error Statement:
FRM-30064: Unable to parse statement select site_uses.location location,
party_site.party_site_number,
substr(loc.address1,1,25) ||' '
|| substr(loc.address2,1,25) ||' '
|| substr(loc.address3,1,25) ||' '
|| substr(loc.address4,1,25) ||' '
|| loc.city|| ',' || ' '
|| nvl(loc.state, loc.province) ||' '
|| t.territory_short_name address,
site_uses.primary_flag,
loc.address1 address1,
loc.address2,
loc.city ||','|| ' '|| nvl(loc.state, loc.province)
||' '||loc.postal_code|| ' '
|| t.territory_short_name address3,
site_uses.site_use_id customer_site_use_id,
site_uses.cust_acct_site_id address_id,
site_uses.bill_to_site_use_id bill_to_site_use_id,
site_uses.primary_salesrep_id primary_salesrep_id,
loc_assign.loc_id location_id,
loc.state state,
loc.country country,
loc.postal_code postal_code,
site_uses.territory_id territory_id,
lp.meaning business_purpose,
lp2.meaning primary_flag_meaning,
ca.cust_account_id cust_account_id,
ca.account_number account_number,
decode(substrb(person.person_last_name,1,50), null,
substrb(person.person_first_name,1,40),
substrb(person.person_last_name,1,50) ||', ' ||
substrb(person.person_first_name,1,40))
contact_name,
owner_party.party_name owner_party
from hz_cust_acct_sites acct_site,
hz_party_sites party_site,
hz_cust_accounts ca,
hz_loc_assignments loc_assign,
hz_locations loc,
hz_cust_site_uses site_uses,
fnd_territories_vl t,
ar_lookups lp ,
ar_lookups lp2,
hz_cust_account_roles role,
hz_parties person,
hz_relationships rel,
hz_parties owner_party
where ca.party_id IN
(SELECT CAST(:IEXCUOVW_HEADER.ORG_PARTY_ID AS NUMBER) FROM dual
UNION
SELECT ar.related_party_id
FROM ar_paying_relationships_v ar
WHERE ar.party_id = :IEXCUOVW_HEADER.PARTY_ID
AND TRUNC(sysdate) BETWEEN
TRUNC(NVL(ar.effective_start_date,sysdate)) AND
TRUNC(NVL(ar.effective_end_date,sysdate)) )
and acct_site.cust_account_id = ca.cust_account_id
and acct_site.party_site_id = party_site.party_site_id
and loc.location_id = party_site.location_id
and loc.location_id = loc_assign.location_id
and nvl(acct_site.org_id, -99) = nvl(loc_assign.org_id, -99)
and acct_site.cust_acct_site_id = site_uses.cust_acct_site_id
and loc.country = t.territory_code
and site_uses.site_use_code = lp.lookup_code
and lp.lookup_type = 'SITE_USE_CODE'
and site_uses.site_use_code = 'BILL_TO'
-- and site_uses.status = 'A'
-- and acct_site.status = 'A'
and site_uses.primary_flag = lp2.lookup_code
and lp2.lookup_type = 'YES/NO'
and site_uses.contact_id = role.cust_account_role_id(+)
and role.party_id = rel.party_id(+)
and rel.subject_table_name(+) = 'HZ_PARTIES'
and rel.object_table_name(+) = 'HZ_PARTIES'
and rel.directional_flag(+) = 'F'
and role.role_type(+) = 'CONTACT'
and rel.subject_id = person.party_id(+)
and owner_party.party_id = ca.party_id
order by location,
address1
ORA-25137: Data value out of range
Record Group IEXCUOVW_LOC_ORG_PAYING_RG
Form: IEXCUOVW
FRM-30085: Unable to adjust form for output.
WMSLABEL.fmx
Error Statements:
FRM-30064: Unable to parse statement select upet.type_name EPC_type_name, upec.name category_name, upet.type_id, upec.category_id
from mgd_idencoding_category upec,
mgd_idencoding_type upet
where upec.category_id = upet.category_id
and ((NVl(upet.partition_value,0)= 0 and upet.category_id = 1 ) or upet.category_id <> 1)
order by upec.category_id,type_name.
ORA-00942: table or view does not exist
Record Group EPC_RULE_RG
Form: WMSLABEL
FRM-30085: Unable to adjust form for output.
Generated 0 files successfully.
Generated 0 files with non-fatal warnings.
Generated 1 files with fatal errors.
adfrmgen is exiting with status 1
End of adfrmgen session
Date/time is Mon Feb 20 2012 04:44:01
WSHFSTRX.fmx
Error Statements :
Compiling package body TRIP...
Compilation error on package body TRIP:
PL/SQL ERROR 905 at line 1703, column 18
object APPS.WSH_FTE_TP_INTEGRATION is invalid
PL/SQL ERROR 0 at line 1703, column 18
Item ignored
PL/SQL ERROR 320 at line 1714, column 35
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1712, column 5
Statement ignored
PL/SQL ERROR 320 at line 1720, column 16
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1720, column 6
Statement ignored
PL/SQL ERROR 320 at line 1721, column 16
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1721, column 6
Statement ignored
PL/SQL ERROR 320 at line 1722, column 17
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1722, column 6
Statement ignored
IEXRCALL.fmx
Error Statements:
FRM-30064: Unable to parse statement select site_uses.location location,
party_site.party_site_number,
substr(loc.address1,1,25) ||' '
|| substr(loc.address2,1,25) ||' '
|| substr(loc.address3,1,25) ||' '
|| substr(loc.address4,1,25) ||' '
|| loc.city|| ',' || ' '
|| nvl(loc.state, loc.province) ||' '
|| t.territory_short_name address,
site_uses.primary_flag,
loc.address1 address1,
loc.address2,
loc.city ||','|| ' '|| nvl(loc.state, loc.province)
||' '||loc.postal_code|| ' '
|| t.territory_short_name address3,
site_uses.site_use_id customer_site_use_id,
site_uses.cust_acct_site_id address_id,
site_uses.bill_to_site_use_id bill_to_site_use_id,
site_uses.primary_salesrep_id primary_salesrep_id,
loc_assign.loc_id location_id,
loc.state state,
loc.country country,
loc.postal_code postal_code,
site_uses.territory_id territory_id,
lp.meaning business_purpose,
lp2.meaning primary_flag_meaning,
ca.cust_account_id cust_account_id,
ca.account_number account_number,
decode(substrb(person.person_last_name,1,50), null,
substrb(person.person_first_name,1,40),
substrb(person.person_last_name,1,50) ||', ' ||
substrb(person.person_first_name,1,40))
contact_name,
owner_party.party_name owner_party
from hz_cust_acct_sites acct_site,
hz_party_sites party_site,
hz_cust_accounts ca,
hz_loc_assignments loc_assign,
hz_locations loc,
hz_cust_site_uses site_uses,
fnd_territories_vl t,
ar_lookups lp ,
ar_lookups lp2,
hz_cust_account_roles role,
hz_parties person,
hz_relationships rel,
hz_parties owner_party
where ca.party_id IN
(SELECT CAST(:IEXCUOVW_HEADER.ORG_PARTY_ID AS NUMBER) FROM dual
UNION
SELECT ar.related_party_id
FROM ar_paying_relationships_v ar
WHERE ar.party_id = :IEXCUOVW_HEADER.PARTY_ID
AND TRUNC(sysdate) BETWEEN
TRUNC(NVL(ar.effective_start_date,sysdate)) AND
TRUNC(NVL(ar.effective_end_date,sysdate)) )
and acct_site.cust_account_id = ca.cust_account_id
and acct_site.party_site_id = party_site.party_site_id
and loc.location_id = party_site.location_id
and loc.location_id = loc_assign.location_id
and nvl(acct_site.org_id, -99) = nvl(loc_assign.org_id, -99)
and acct_site.cust_acct_site_id = site_uses.cust_acct_site_id
and loc.country = t.territory_code
and site_uses.site_use_code = lp.lookup_code
and lp.lookup_type = 'SITE_USE_CODE'
and site_uses.site_use_code = 'BILL_TO'
-- and site_uses.status = 'A'
-- and acct_site.status = 'A'
and site_uses.primary_flag = lp2.lookup_code
and lp2.lookup_type = 'YES/NO'
and site_uses.contact_id = role.cust_account_role_id(+)
and role.party_id = rel.party_id(+)
and rel.subject_table_name(+) = 'HZ_PARTIES'
and rel.object_table_name(+) = 'HZ_PARTIES'
and rel.directional_flag(+) = 'F'
and role.role_type(+) = 'CONTACT'
and rel.subject_id = person.party_id(+)
and owner_party.party_id = ca.party_id
order by location,
address1
ORA-25137: Data value out of range
Record Group IEXCUOVW_LOC_ORG_PAYING_RG
Form: IEXRCALL
FRM-30085: Unable to adjust form for output.
WSHSTREF.fmx
Error statements:
Compiling package body TRIP...
Compilation error on package body TRIP:
PL/SQL ERROR 905 at line 1703, column 18
object APPS.WSH_FTE_TP_INTEGRATION is invalid
PL/SQL ERROR 0 at line 1703, column 18
Item ignored
PL/SQL ERROR 320 at line 1714, column 35
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1712, column 5
Statement ignored
PL/SQL ERROR 320 at line 1720, column 16
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1720, column 6
Statement ignored
PL/SQL ERROR 320 at line 1721, column 16
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1721, column 6
Statement ignored
PL/SQL ERROR 320 at line 1722, column 17
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1722, column 6
Statement ignored
WSHQSSUI.fmx
Error statements:
Compiling package body TRIP...
Compilation error on package body TRIP:
PL/SQL ERROR 905 at line 1703, column 18
object APPS.WSH_FTE_TP_INTEGRATION is invalid
PL/SQL ERROR 0 at line 1703, column 18
Item ignored
PL/SQL ERROR 320 at line 1714, column 35
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1712, column 5
Statement ignored
PL/SQL ERROR 320 at line 1720, column 16
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1720, column 6
Statement ignored
PL/SQL ERROR 320 at line 1721, column 16
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1721, column 6
Statement ignored
PL/SQL ERROR 320 at line 1722, column 17
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1722, column 6
Statement ignoredthese are the error statements -
Error while applying Patch 9593176
Hi,
when i'm applying patch 9593176 the following errors appeared :
Oracle Home : /oracle/div4db/11.1.0
Central Inventory : n/a
from : n/a
OPatch version : 11.1.0.6.2
OUI version : n/a
OUI location : n/a
Log file location : /oracle/div4db/11.1.0/cfgtoollogs/opatch/opatch2012-02-24_13-40-03PM.log
ApplySession applying interim patch '9593176' to OH '/oracle/div4db/11.1.0'
Running prerequisite checks...
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 9593176: Required component(s) missing : [ oracle.developer.forms, 10.1.2.3.0 ]
ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 74i've checked the OAS version and it's 10.1.2.3.0Quite obvious:
oracle.developer.forms, 10.1.2.3.0 whereas
Oracle Home : /oracle/div4db/11.1.0which seems to be the oracle home of a 11.1 database. Did you set the oracle_home environment variable to the oracle home of your forms installation before invoking opatch?
cheers -
Error while applying patch 3384350
Hi all,
I'm receiving the following error while apply patch 3384350 (Supply Chain Management Family Pack J 11i.SCM_PF.J) to an 11.5.9 instance.
from adpatch.log:
The following Oracle Forms objects did not generate successfully:
inv forms/US INVTDILT.fmx
from worker log:
Compiling package body CHECK_RESERVATIONS_ALLOCATIONS...
Compilation error on package body CHECK_RESERVATIONS_ALLOCATIONS:
PL/SQL ERROR 358 at line 12, column 9
column 'INVENTORY_ITEM_ID' exists in more than one table; use qualifier
PL/SQL ERROR 0 at line 10, column 2
SQL Statement ignored
I have a SR open, but thought I would ask here as well in case anyone else had ran into this issue. There was only 1 direct hit on metalink for this error and it provided no solution and it's bug # link was not accessible to the public.
thanks in advance,
-ChadCompiling package body CHECK_RESERVATIONS_ALLOCATIONS...
Compilation error on package body CHECK_RESERVATIONS_ALLOCATIONS:
PL/SQL ERROR 358 at line 12, column 9
column 'INVENTORY_ITEM_ID' exists in more than one table; use qualifier
PL/SQL ERROR 0 at line 10, column 2
SQL Statement ignoredA workaround is to precede the column name ('INVENTORY_ITEM_ID') with the table name so that the column reference is unambiguous. Please note that this is only a workaround to fix the issue if you cannot afford waiting to hear back from Oracle support with a proper solution. -
Error While Applying patch 9239089 Oracle Applications DBA 12.1.3 Product R
Dear All,
I want to upgrade my application from Release 12.1.1 To 12.1.3. on windows server 2003 R2.
while applying patch 9239089 I got this error
"Extracting object modules for product ad...
lib: not found
adlibout: error: cannot get table of contents in library file for product ad
File name is D:/oracle/PROD/apps/apps_st/appl/ad/12.0.0/lib/adst.lib
Skipping to next product...
Please see the complete contents from log file.
You are running adlibout, version 120.0
Start of adlibout session
Date/time is Sun May 8 17:02:50 AST 2011
Log file is D:/oracle/PROD/apps/apps_st/appl/admin/PROD/log/adlibout.log
Command line arguments are
"filelist=D:/oracle/PROD/apps/apps_st/appl/admin/PROD/out/paoapp000.txt"
Creating temporary file list...
Done creating temporary file.
---ad----------------------------------------
Extracting object modules for product ad...
lib: not found
adlibout: error: cannot get table of contents in library file for product ad
File name is D:/oracle/PROD/apps/apps_st/appl/ad/12.0.0/lib/adst.lib
Skipping to next product...
End of adlibout session
Date/time is Sun May 8 17:02:50 AST 2011
Please Advise how to solve this issue.
Thanks and regardslib: not foundPlease see these docs.
Error when relinking programs LINK : fatal error LNK1104: cannot open file [ID 1308860.1]
Patch 4157177 Error: Cannot Get Table Of Contents In Library File For Product Fnd [ID 335488.1]
Adcfgclone Appstier Error Out In Adlnk806.Sh [ID 601788.1]
Thanks,
Hussein -
Error While Applying patch ST-PI 2008_1_700 to solution Manager
Dear Techies,
Thanks alot for your fast response.
We are trying to upgrade Solution Manager Stack from
ST-PI 2005_1_700 to ST-PI 2008_1_700 ,
While applying patch it was suddenly stopped with an error
"Manual modification adjustment is neccessary"
While I tried to adjust it.
In Note correction tree. This the message with " green tick"
"0001293326 EWA: Newest ST-PI Is Rated 'Outdated'; Wrong RTCCTOOL Date"
and is not allowing me to proceed further.
How to go about.
Thanks in advance.
regards,
KiranHi Varun,
Thanks for your reply.
As suggested by you, I executed "RTCCTOOL" programme.
It Has given that 4 notes were in red status.
They are.
1. [Note 69455 ] Addon upgrade ST-A/PI 01N_700SOL
Description "Servicetools for Applications Plug-In" for Solution Manager 4.0-7.10 (Addon delta upgrade package)
Implementation From http://service.sap.com/supporttools->ST-A/PI download the addon upgrade package ST-A/PI
01N_700SOL. Upload to tx SAINT (just as you would do for an installation) and install as per note 69455
Then restart report RTCCTOOL and choose 'List->Refresh from SAPNet'.
4. [Note 539977 ] ST-PI Support Packages
Description Addon supportpackage level 4 for ST-PI 2008_1_700 for 7.00 [patches up to level 4 for Basis tools for services]
Implementation Open http://service.sap.com/supporttools-> ST-PI 2008_1_700 ->Supportpk. Add patch SAPKITLRD4 (and predecessors if not yet implemented) to download basket. Release basket via Maintenance optimizer. Upload from frontend int transaction SPAM, define a queue and import the queue.
6. [Note 539977 ] Note 1312413 for ST-PI
Description Maintenance Certificates for SPAM/SAINT may get periodically overwritten by invalid ones on ST-PI
2008_1_7* SP 00. Prevent this proactively,even if you do not yet use the automatic maint. certificate
distribution.
Implementation We recommend that you implement the Supportpackage SP1 for ST-PI 2008_1* to solve the error. Only if
not possible implement note 1312413 with not version >=12 using SNOTE. Regarding automatic maint.
certificate distribution see http://service.sap.com/maintenancecertificate.
9. [Note 1293326 ] EWA serviceprep correct. in sequence.
Description Wrong alerts appear in EWAlert Service preparation section (Newest ST-PI Rated Outdated / Wrong
RTCCTOOL Date) if Solution Manager ST-SER < 701_2008_2 SP1 and satellites on ST-PI 2008_1* / ST-A/PI 01L*.
Implementation Implement the coding correction of this note 1293326 with SNOTE to solve the wrong service preparation alerts. Else if you do not mind the wrong alerts simply set this recommendation manually to green after reading.
These are in green status
Successfully implemented addons/ transports/ notes
2. [Note 69455 ] Proc. after addon impl.
3. [Note 539977 ] Addon ST-PI 2008_1_700
5. [Note 539977 ] Note 1300023 for ST-PI
7. [Note 539977 ] Note 1293657 for ST-PI
8. [Note 12103 ] Collectors and TCOLL.
While I tried to implement the note "69455" system is giving the message that there are no valid corrections and is coming out of the process
"Note 0000069455 cannot be implemented since no valid correction is available."
And is same for other notes also.
How to go ahead.
Thanks in advance.
Regards,
Kiran -
Error while applying patch MLR#4
hi,
I am getting error while applying patch MLR#4. Can you please let me know whats error can be resolved?
Please see below the snapshots from log file.
Thanks,
Vaibhav
Execute perf_wid_pid_pcid.sql
Error: Abort transaction
java.lang.NullPointerException
at oracle.tip.adapter.b2b.data.B2BSchemaUpdate.addAQJMSTransportProtocolToGenericExchange(B2BSchemaUpdate.java:1009)
at oracle.tip.adapter.b2b.data.B2BSchemaUpdate.main(B2BSchemaUpdate.java:509)
Begin Transaction
Inserting DocumentRoutingID into X12_DOCUMENT_TYPE_PARAMETERS
Failure! Error stack:
java.lang.NullPointerException
at oracle.tip.buslogic.bll.b2b.DocumentProtocolWizard.getDocumentTypeParameter(DocumentProtocolWizard.java:819)
at oracle.tip.adapter.b2b.data.B2BParameterSeed.createDocumentTypeParameters(B2BParameterSeed.java:214)
at oracle.tip.adapter.b2b.data.B2BParameterSeed.main(B2BParameterSeed.java:160)
start: update opmn xml
Transaction started
An exception occured during seeding
java.lang.NullPointerException
at oracle.tip.buslogic.bll.b2b.DocumentProtocolWizard.getDocumentTypeParameter(DocumentProtocolWizard.java:819)
at oracle.tip.adapter.b2b.exchange.ebms.EBMSPatch.createCustomDocumentTypeParameters(EBMSPatch.java:386)
at oracle.tip.adapter.b2b.exchange.ebms.EBMSPatch.seed(EBMSPatch.java:56)
at oracle.tip.adapter.b2b.exchange.ebms.EBMSPatch.main(EBMSPatch.java:38)
Seeding successful
Error -: AIP-11001: Transaction closed: Error -: AIP-11001: Transaction closed
at oracle.tip.buslogic.common.Transaction.commit(Transaction.java:72)
at oracle.tip.adapter.b2b.exchange.ebms.EBMSPatch.seed(EBMSPatch.java:79)
at oracle.tip.adapter.b2b.exchange.ebms.EBMSPatch.main(EBMSPatch.java:38)
Caused by: Error -: AIP-11001: Transaction closed
at oracle.tip.repos.core.driver.CatalogTransaction.commit(CatalogTransaction.java:1464)
at oracle.tip.buslogic.common.Transaction.commit(Transaction.java:70)
... 2 more
Starting task #1 [AS1SeedTask] ...
Task [AS1SeedTask]: starting ...
EDI X12 over AS1 is being seeded.
create BusinessProtocol EDI-EDI_X12 over AS1....
creating AS Exchange Protocols...
create AS1 1.0
java.lang.Exception: No TransportProtocol found for the given name and revision 'EMail' '1.0'
at oracle.tip.seed.AS1SeedTask.getTransportProtocol(AS1SeedTask.java:342)
at oracle.tip.seed.AS1SeedTask.createAS1(AS1SeedTask.java:483)
at oracle.tip.seed.AS1SeedTask.createAS1ExchangeProtocol(AS1SeedTask.java:423)
at oracle.tip.seed.AS1SeedTask.createBusinessProtocol_EDI_EDI_X12_AS1(AS1SeedTask.java:530)
at oracle.tip.seed.AS1SeedTask.doWork(AS1SeedTask.java:104)
at oracle.tip.seed.SeedDriver.processTasks(SeedDriver.java:222)
at oracle.tip.seed.SeedDriver.go(SeedDriver.java:283)
at oracle.tip.seed.AS1SeedDriver.main(AS1SeedDriver.java:80)
java.lang.Exception: No TransportProtocol found for the given name and revision 'EMail' '1.0'
at oracle.tip.seed.AS1SeedTask.getTransportProtocol(AS1SeedTask.java:342)
at oracle.tip.seed.AS1SeedTask.createAS1(AS1SeedTask.java:483)
at oracle.tip.seed.AS1SeedTask.createAS1ExchangeProtocol(AS1SeedTask.java:423)
at oracle.tip.seed.AS1SeedTask.createBusinessProtocol_EDI_EDI_X12_AS1(AS1SeedTask.java:530)
at oracle.tip.seed.AS1SeedTask.doWork(AS1SeedTask.java:104)
at oracle.tip.seed.SeedDriver.processTasks(SeedDriver.java:222)
at oracle.tip.seed.SeedDriver.go(SeedDriver.java:283)
------------------------------------------Make sure that no oracle processes are running on windows, stop all services again and use the task manager to kill any oracle process that is running. But first read de README.txt that you have with your patch, there is all the steps you need to follow to perform that installation.
Message was edited by:
user637951 -
Hi All,
Getting error while applying patch 4440000
cd $AU_TOP/patch/115/driver/u4440000.drv
ERROR:
Failed: XDOLoader.class on worker 1
Failed: CustMigrationTool.class on worker 2
Failed: XDOLoader.class on worker 3
Failed: XDOLoader.class on worker 4
Worker 2 log file:*
Start time for file is: Tue Jun 23 2009 00:14:02
adjava -ms128m -mx256m -nojit oracle.jrad.migration.cust.CustMigrationTool ak % -customer_cust -username &un_apps @ -password &pw_apps -dbconnection &jdbc_db_addr -jrad_username &un_apps @ -jrad_password &pw_apps -jrad_dbconnection &jdbc_db_addr -rootpackage "/oracle/apps/ak/" -migrationdir &fullpath_ak_mds_directory
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/jrad/migration/cust/CustMigrationTool
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Worker 1 log file:_
Start time for file is: Tue Jun 23 2009 00:14:02
adjava -ms128m -mx256m -nojit oracle.apps.xdo.oa.util.XDOLoader UPLOAD -DB_USERNAME &un_apps -DB_PASSWORD &pw_apps -JDBC_CONNECTION &jdbc_db_addr -LOB_TYPE TEMPLATE_SOURCE -APPS_SHORT_NAME AHL -LOB_CODE AHL_RA_ANZ_PRC_PLN_DAY -LANGUAGE en -TERRITORY US -XDO_FILE_TYPE RTF -TRANSLATE Y -FILE_NAME &fullpath:ahl:patch/115/publisher/templates/US:AHLRAT3.rtf
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/java/util/collections/Comparator
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Jun 23 2009 00:14:03
Worker 3 log file:*
Start time for file is: Tue Jun 23 2009 00:14:02
adjava -ms128m -mx256m -nojit oracle.apps.xdo.oa.util.XDOLoader UPLOAD -DB_USERNAME &un_apps -DB_PASSWORD &pw_apps -JDBC_CONNECTION &jdbc_db_addr -LOB_TYPE TEMPLATE_SOURCE -APPS_SHORT_NAME AHL -LOB_CODE AHL_RA_ANZ_PRC_PLN_SUMM -LANGUAGE en -TERRITORY US -XDO_FILE_TYPE RTF -TRANSLATE Y -FILE_NAME &fullpath:ahl:patch/115/publisher/templates/US:AHLRAT4.rtf
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/java/util/collections/Comparator
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Jun 23 2009 00:14:03
Worker 4 log file:_
Start time for file is: Tue Jun 23 2009 00:14:01
adjava -ms128m -mx256m -nojit oracle.apps.xdo.oa.util.XDOLoader UPLOAD -DB_USERNAME &un_apps -DB_PASSWORD &pw_apps -JDBC_CONNECTION &jdbc_db_addr -LOB_TYPE TEMPLATE_SOURCE -APPS_SHORT_NAME AHL -LOB_CODE AHLPRDWC -LANGUAGE en -TERRITORY US -XDO_FILE_TYPE RTF -TRANSLATE Y -FILE_NAME &fullpath:ahl:patch/115/publisher/templates/US:AHLPRDWC1.rtf
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/java/util/collections/Comparator
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Jun 23 2009 00:14:02
Please let me know any solution
Thanks in advance
Regards,
Bhanu Chander.Hi,
As a part of R12 upgrade.
once The Installation creates APPL_TOP, COMMON_TOP, INST_TOP and 10g Oracle Home
Now we are connected to R12 application.
Applied patch AD.A 4502962.
Run the American English upgrade patch driver
cd $AU_TOP/patch/115/driver
adpatch options=nocopyportion,nogenerateportion
Please enter the name of your AutoPatch driver file: u4440000.drv
This patch doesn't have readme it will be under cd $AU_TOP/patch/115/driver
Thanks,
Bhanu Chander -
Error while applying patch no 9239089
Hello,
We are applying patch no 9239089 to EBS version 12.1.1 on WIndows 2003 R2 environment.
While applying the patch on the application user we are getting the following error (adrelink.log)
Starting link of product 'ad' on Wed May 22 16:23:16 IST 2013
Current product is ad
Current product TOP is $ADTOP
Current prodarea is D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0
Relinking module 'adadmin.exe' in product ad ...
gnumake -f D:/oracle/VIS1/apps/apps_st/appl/admin/VIS1/out/link_ad_6832.mk
D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin/adadmin.exe
Starting link of ad executable 'adadmin.exe' on Wed May 22 16:23:17 IST 2013
Done with link of ad executable 'adadmin.exe' on Wed May 22 16:23:17 IST 2013
Relink of module "adadmin.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
What is causing this problem?
I ran: gnumake -f D:/oracle/VIS1/apps/apps_st/appl/admin/VIS1/out/link_ad_6832.mk
D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin/adadmin.exe
and got the error:
This application has failed to start because libintl-8.ddl was not found. Re-instaaling the application may fix the problem.
Regards
PrasadHello,
The following is the error that I am getting while running adpatch on pacth number 9239089:
Relinking module 'adadmin.exe' in product ad ...
gnumake -f D:/oracle/VIS1/apps/apps_st/appl/admin/VIS1/out/link_ad_2112.mk
D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin/adadmin.exe
Starting link of ad executable 'adadmin.exe' on Fri May 24 12:59:01 IST 2013
link.exe -MAP:D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin/adadminnew.map
-NODEFAULTLIB -NOLOGO -SUBSYSTEM:CONSOLE -ENTRY:mainCRTStartup
-OUT:D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin/adadmin.new \
D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/lib/adadmin.obj \
D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/lib/adst.lib
D:/oracle/VIS1/apps/apps_st/appl/fnd/12.0.0/lib/FNDCORE.lib
D:/oracle/VIS1/apps/tech_st/10.1.2/precomp/lib/msvc/orasql10.lib
D:/oracle/VIS1/apps/tech_st/10.1.2/precomp/lib/msvc/orasqx10.lib
D:/oracle/VIS1/apps/tech_st/10.1.2/RDBMS/lib/oraclient10.lib
D:/oracle/VIS1/apps/tech_st/10.1.2/RDBMS/lib/oracommon10.lib
D:/oracle/VIS1/apps/tech_st/10.1.2/NETWORK/lib/oranro10.lib
D:/oracle/VIS1/apps/tech_st/10.1.2/NETWORK/lib/oran10.lib
D:/oracle/VIS1/apps/tech_st/10.1.2/NETWORK/lib/oranl10.lib
D:/oracle/VIS1/apps/tech_st/10.1.2/lib/oranls10.lib
D:/oracle/VIS1/apps/tech_st/10.1.2/lib/oracore10.lib /LIB/MSVCRT.LIB
/LIB/OLDNAMES.LIB "LIB"/KERNEL32.LIB "LIB"/USER32.LIB "LIB"/ADVAPI32.LIB
"LIB"/WINSPOOL.LIB "LIB"/COMDLG32.LIB "LIB"/GDI32.LIB "LIB"/VERSION.LIB
LINK : warning LNK4044: unrecognized option '/LIB/MSVCRT.LIB'; ignored
LINK : warning LNK4044: unrecognized option '/LIB/OLDNAMES.LIB'; ignored
LINK : fatal error LNK1181: cannot open input file 'LIB/KERNEL32.LIB'
D:/oracle/VIS1/apps/apps_st/appl/admin/VIS1/out/link_ad_2112.mk:804: recipe
for target 'D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin/adadminnew.exe'
failed
gnumake: *** [D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin/adadminnew.exe]
Error 157
Done with link of ad executable 'adadmin.exe' on Fri May 24 12:59:02 IST 2013
Relink of module "adadmin.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
This is happening of linking of other files.
Regards
Prasad -
While applying patch 3653484, Relink of module "ar60desb" fails
Hi All,
While applying patch 3653484, Relink of module "ar60desb" fails
adrelink.log file entry
Starting link of fnd executable 'ar60desb' on Wed Apr 29 10:52:39 PAKDT 2009
ld -s -H512 -T512 -bhalt:4 -brtl -L/erpbkp/oracle/tstora/8.0.6/lib
-L/usr/lib -o /erpbkp/oracle/tstappl/fnd/11.5.0/bin/ar60desb.new
/erpbkp/oracle/tstora/8.0.6/lib//s0main60.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/sslmdgtab.o
/erpbkp/oracle/tstappl/fnd/11.5.0/lib/xitsrw.o
/erpbkp/oracle/tstappl/po/11.5.0/lib/xirpo.o
/erpbkp/oracle/tstappl/po/11.5.0/lib/libpo.a
/erpbkp/oracle/tstappl/fa/11.5.0/lib/xirfa.o
/erpbkp/oracle/tstappl/fa/11.5.0/lib/libfa.a
/erpbkp/oracle/tstappl/ar/11.5.0/lib/xirar.o
/erpbkp/oracle/tstappl/ar/11.5.0/lib/libar.a
/erpbkp/oracle/tstappl/ff/11.5.0/lib/xirff.o
/erpbkp/oracle/tstappl/ff/11.5.0/lib/libff.a
/erpbkp/oracle/tstappl/fnd/11.5.0/lib/xirfnd.o
/erpbkp/oracle/tstappl/fnd/11.5.0/lib/fdxsrw.o
/erpbkp/oracle/tstappl/fnd/11.5.0/lib/libfnd.a
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwecat.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwecpf.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwecty.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rweats.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwepls.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rxdsql.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rweiap0.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rxsi.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/ui10.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/uiicxd.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwsng.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwscl.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwssc.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwssc0.o
/erpbkp/oracle/tstora/8.0.6/reports60/lib/rwsdt.o -lrw60 -lgraphics60
-lobx60 -lge60 -locl60 -lnn60 -lrws60 -lde60 -lzrc60 -lrws60 -lnvu60
-lnvc60 -lnvs60 -lucol60 -luicc60 -lca60 -lmmiw60 -lmmov60 -lmma60
-lmmos60 -lmmoi60 -lmmia60 -lmmft60 -lmmcm60 -lvgs60 -luihx60 -luc60
-luipr60 -luimotif60 -lot60 -lrem60 -lree60 -lrec60 -luiimg60 -luimotif60
-luipr60 -luiimg60 -luc60 -lrem60 -luimotif60 -luia60 -ltknqap60 -luipr60
-luimotif60 -lutt60 -lix60 -lixd60 -lrod60 -lror60 -lros60 -lrod60 -lror60
-lros60 -lrod60 -luat
60 -lutc60 -lutl60 -lutsl60 -lplsf -lplsb -lextp
/erpbkp/oracle/tstora/8.0.6/lib/libpsd.a -lplsf -lplsb -lextp
/erpbkp/oracle/tstora/8.0.6/lib//libslax.a -lsql
/erpbkp/oracle/tstora/8.0.6/lib/nautab.o
/erpbkp/oracle/tstora/8.0.6/lib/naeet.o
/erpbkp/oracle/tstora/8.0.6/lib/naect.o
/erpbkp/oracle/tstora/8.0.6/lib/naedhs.o `cat
/erpbkp/oracle/tstora/8.0.6/lib/naldflgs` -lnetv2 -lnttcp -lnetwork -lncr
-lnetv2 -lnttcp -lnetwork -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3
-lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork -lncr -lnetv2
-lnttcp -lnetwork -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4
-lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3
-lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lld -lm `cat
/erpbkp/oracle/tstora/8.0.6/lib/sysliblist` -lm
/erpbkp/oracle/tstora/8.0.6/rdbms/lib/kpudfo.o -lpthreads
-L/erpbkp/oracle/tstora/8.0.6/network/jre11/lib/aix/native_threads -ljava
-L/usr/lpp/X11/lib/R5 -lXm -lXt -lX11 -lm -lix60 -lixd60 -lX11 -lnlsrtl3
ld: 0706-010 The binder was killed by a signal: Killed
Check for binder messages or use local problem reporting procedures.
make: The error code from the last command is 254.
Stop.
Done with link of fnd executable 'ar60desb' on Wed Apr 29 10:52:39 PAKDT 2009
Relink of module "ar60desb" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /erpbkp/oracle/tstappl/fnd/11.5.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Also, relinking modules ar60run, ar60runb, f60webmx, GLAMAS, GLAVAL, GLBAAC, GLBAAR, GLIDEL, GLIGEN, GLIXFR, GLLDEL, GLLEZL fails
Please suggest
Regards,
SKHi Hussein,
i was able to get rid of the relink error, as mentioned above
0706-010 Binder killed by signal Signal, was running out of some memory while linking object files...
continued with adpatch but facing
Failed: file FNDLOADSO on worker 1
worker log file entry:
Start time for file is: Wed Apr 29 2009 21:35:25
/erpbkp/oracle/tstappl/fnd/11.5.0/bin/FNDLOADSO &ui_apps UPLOAD &fullpath_fnd_patch/115/import_fndobjt.lct &fullpath_imc_patch/115/import/US_imc115ts.ldt
Uploading from the data file /erpbkp/oracle/tstappl/imc/11.5.0/patch/115/import/US/imc115ts.ldt
Altering database NLS_LANGUAGE environment to AMERICAN
Dumping from LCT/LDT files (/erpbkp/oracle/tstappl/fnd/11.5.0/patch/115/import/fndobjt.lct(115.5), /erpbkp/oracle/tstappl/imc/11.5.0/patch/115/import/US/imc115ts.ldt) to staging tables
Dumping LCT file /erpbkp/oracle/tstappl/fnd/11.5.0/patch/115/import/fndobjt.lct(115.5) into FND_SEED_STAGE_CONFIG
A database error occurred:
ORA-25153: Temporary Tablespace is Empty
The error occurred while executing the following statement:
INSERT INTO FND_SEED_STAGE_CONFIG (LCT_FILE, CONFIG_ID, ENTITY_NAME, STMT_TYPE, UPLOAD_STMT,GET_WHO_STMT, BIND_VAR_CNT, PK_VAR_CNT, ENTITY_METADATA, PROC_ID ,BIND_VAR0 ,BIND_VAR1 ,BIND_VAR2 ,BIND_VAR3 ,BIND_VAR4 ,BIND_VAR5 ,BIND_VAR6 ,BIND_VAR7 ,BIND_VAR8 ,BIND_VAR9 ,BIND_VAR10 ,BIND_VAR11 ,BIND_VAR12) VALUES( :lct_file, FND_SEED_STAGE_CONFIG_S.NextVal, :entity_name, :stmt_type, :upload_stmt, :get_who_stmt, :bind_var_cnt, :pk_var_cnt, :entity_metadata, :proc_id ,:bind_var0 ,:bind_var1 ,:bind_var2 ,:bind_var3 ,:bind_var4 ,:bind_var5 ,:bind_var6 ,:bind_var7 ,:bind_var8 ,:bind_var9 ,:bind_var10 ,:bind_var11 ,:bind_var12) RETURNING CONFIG_ID INTO :config_id
AD Worker error:
The above program failed with error code 1.
See the AD Worker log file and/or the program log file for details.
Time when worker failed: Wed Apr 29 2009 21:35:25
Evaluating symbolic arguments ....
Done evaluating symbolic arguments.
Could you please suggest?
Regards,
Krishnaraj -
hello,
After installing the Adobe reader, I got the following error message:
Error 1328.Error applying patch to fileC:/Config.Msi/PTEADA.tmp.It has probably been updated by other means, and can no longer be modified by this patch.For more information contact your patch vendorFor AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).
-
I am using Acrobat XI Pro and tried to install the current update. I got this error message: "Error 1328.Error applying patch to file C:\Config.Msi\pT64b3.tmp It has probably been updated by other means1 and can no longer be modified by this patch. For more information contact your patch vendor." tried uninstalling and reinstalling and still get the error. Searched for C:\Config.Msi\pT64b3.tmp and cannot find the path or the file
For AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).
-
OPMN configuration assistant failed while applying patch on SOA 10.1.3.1
Hi All,
I tried upgrading the SOA Server from version 10.1.3.1 to 10.1.3.4 by applying a patch . But while applying patch I faced an error “OPMN Configuration Assistant failed “ . When I gave opmnctl status command in the command prompt I found that the issue is with starting up the HTTP Server . Rest all components of opmn were up and running.
The error msg i got is:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Output generated from configuration assistant "Run One-off OPatches":
Oracle Interim Patch Installer version 1.0.0.0.56
Copyright 2006 Oracle Corporation. All Rights Reserved..
We recommend you refer to the OPatch documentation under
OPatch/docs for usage reference. We also recommend using
the latest OPatch version. For the latest OPatch version
and other support related issues, please refer to document
293369.1 which is viewable from metalink.oracle.com
ERROR: OPatch failed because of Inventory problem.Cannot find Oracle Universal Installer shared library
OPatch returns with error code = 100
Configuration assistant "Run One-off OPatches" succeeded
Output generated from configuration assistant "OPMN Configuration Assistant":
opmnctl: starting opmn and all managed processes...
================================================================================
2 of 3 processes started.
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server/
Error
--> Process (index=1,uid=1392512192,pid=4728)
failed to start a managed process after the maximum retry limit
Log:
D:\product\10.1.3.1\OracleAS_3\opmn\logs\\HTTP_Server~1.log
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
can you please suggest a way out for this error .
Edited by: user10451494 on May 24, 2009 10:24 AMDid you check what's in D:\product\10.1.3.1\OracleAS_3\opmn\logs\HTTP_Server~1.log file? Also check what error is reported in D:\product\10.1.3.1\OracleAS_3\Apache\Apache\logs\error.log file.
Thanks
Shail
Maybe you are looking for
-
Hi experts when I run Network UI Element to presnt org Chart I get in IE->Tools->Java Console the follow error: <<<--- Applet.destroy(): AppWin0/JNET --->>> <<<--- EXIT for AppWin0/JNET --->>> java.lang.NullPointerException at sun.plugin.javasc
-
We are glad to announce that the excellent tutorials Mr. Paul F, Sullivan (SULLutions.com) writes for us have been revised and updated in the light of the changes introduced in version 1.1. Please feel free to check them out at our site (http://labhs
-
Hi All, I want to install ABAP work bench in my Home, for practicing purpose. Please post links where i can download it. Thanks Hari. Moderator message: Welcome to SCN! Moderator message: please search for available information/documentation, "ABAP T
-
Unable to print from iPhoto '09 - asks for a theme
I just started to experience the following phenomenon: when I try to print from iPhoto '09 (v8.1.1), I get the following error message: "No available theme. There were no themes located. Until at least one theme has been installed, this feature will
-
Is there a way to quickly locate a clip on the timeline back to the bin?
Hi there, Unfortunately I try to equate FCP with adobe premiere pro (I need to let it go), but one thing I always did find useful was right clicking on a clip in the timeline and saying "locate". It took me straight to the raw footage in the capture