Applying preset to group of images doesn't work

In the develop module of Lightroom 2.2, I do a Ctl-A to select all images, and then click on a preset button. The preset only gets applied to the active image, not all selected. This is an issue on one of my computers, but not on the other. Am I missing some setting or preference?
Thank you.

Dang -- I had auto sync turned on one computer, and of course it worked. Auto sync was turned off on the one where it didn't work as I expected. Thanks tomrock for triggering me to look at that.

Similar Messages

  • Applying keywords to groups of images

    I'm having difficulty applying Keywords to groups of images. When I select a group of images in the browser and drag a keyword from the HUD over them, the keyword is only applied to the image onto which it was directly dropped. I'm sure that in the past I've been able to apply a keword to any number of images at once using this technique. What's the obvious thing that I'm doing wrong here?
    Andy.

    "That's probably because you have the toggle primary only selected. It's the rectangle box on the far right of the first set of controls on the bottom of the screen.
    Jeff "
    Or in case you have those controls hidden you can also press 'S'

  • I'm using a Dell Inspiron 7520 ... pretty new. Sometimes when I download a CD / album to my library acouple of tracks get separated away from the main group. I've tried to click and drag the stragglers over to the main group but it doesn't work. Any Ideas

    .When installing a CD/album into my library some of the tracks get separated away from the main group of tracks. I try to click and drag the stragglers to the main group but it doesn't work. My laptop is using Windows 8. My old XP laptop didn't have this problem. I'm not sure if that has any thing to do with it. Any ideas would be appreciated. It's more of an irritation than a problem but if it can be solved, it would be a good thing. Thanks!         Paul 

    Hey Paul,
    If I understand correctly, it sounds like iTunes is not grouping the songs from a particular CD together. The cause could be something as minor as a misspelling or slight variations. For more information, see the following resource:
    Why aren't songs with the same album art grouped together?
    http://support.apple.com/kb/TS1468
    Thanks,
    Matt M.

  • Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......

    Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......can anyone help, please?!

    Thanks for that information!
    I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
    In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
    When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
    Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

  • Applying metadata to groups of images

    i understand this has been answered by "toggle primary" off but this isnt working for me when applying keywords for some odd reason.
    any ideas?
    matthew

    It should, when you select a group of images, the primary will be the one showing in the viewer.
    If primary only is off all the images should get the keywords, if it's on only the image shown in the browser with a yellow border (primary) will get the keyword.
    Press 's' to switch 'primary only' on or off.

  • The preset time (Edit Preferences General) doesn't work

    The preset time (Edit>Preferences>General) of the Still Images Default Duration doesn't work.
    I have several times tried. No result.
    What to do?

    Changing the value does not apply to already imported stills.
    You need to delete them and re-import.
    Or just change the duration in the Project Window.

  • Inserting dynamic image doesn't work for range of records

    Hi,
    I'm using BI Publisher 5.6.3 and E-business Suite 12.1.3.
    I have set up my RTF template so that it brings in a logo image dynamically onto an invoice.
    The code in the "alt text" field behind my dummy image is: url:{concat('${OA_MEDIA}/',//CF_LOGO)} 
    The image is within a repeating loop that loops around the invoices chosen.
    It works fine if I run the concurrent request for a single invoice - the correct logo image is shown.
    However if I run the concurrent request for a range of invoices which should contain a mixture of both logos it doesn't work and prints the same logo for each invoice regardless of what it should be displaying.
    For testing purposes I also output the name of the image, field CF_LOGO (which is calculated in a formula in the RDF file) just before the actual image, and this always displays the correct value even for a range of invoices. As you can see above this is the field that I include in the code to obtain the image.
    Does anyone have any idea why a range of invoices will only display one logo image?
    Many thanks for any suggestions.
    Regards,
    Hazel

    It's a bug in MDM 5.5 SP04.  The fix is in MDM 5.5 SP05.

  • Itemrenderer with images doesn't work  correctly if variableRowHeight="true"?

    Hi all,
    I have a problem to use itemrenderer in my project:
    I have to show some images in one of my DataGridColumn:
    <mx:DataGridColumn id="datasetcolumn" headerText="DataSet"
    dataField="dataSetList"
    width="240"itemRenderer="DataSetRenderer"/>
    The dataSetList is an arraycollection of images;
    I use Tile as the itemrederer, My DataSetRenderer is:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Tile xmlns:mx="
    http://www.adobe.com/2006/mxml"
    horizontalScrollPolicy="off" width="90%" height="100%" >
    <mx:Metadata>
    [Event(name="showCaddwgNOVWebDataset",
    type="flash.events.Event")]
    </mx:Metadata>
    <mx:Script>
    <![CDATA[
    import mx.controls.Image;
    import mx.controls.AdvancedDataGrid;
    import mx.core.IFlexDisplayObject;
    import CETEvent.*;
    import view.util.*;
    import mx.collections.ArrayCollection;
    [Bindable] public var myarr:ArrayCollection = new
    ArrayCollection();
    override public function set data(value:Object):void{
    super.data = value;
    myarr = value.datasetList;
    this.myrep.dataProvider = myarr as ArrayCollection;
    ]]>
    </mx:Script>
    <mx:Repeater id="myrep" visible="true" >
    <mx:Label text="{myrep.currentItem.itIconName}"/>
    <mx:Image id="datasetImg"
    source="{myrep.currentItem.itIconName}"
    useHandCursor="true" buttonMode="true" mouseChildren="false"
    toolTip="{myrep.currentItem.itName}"/>
    </mx:Repeater>
    </mx:Tile>
    The problem is:
    Whenever you change the column size or scroll down the
    datagrid,
    the images will be added again.
    if the datasetlist is changed the old images doesn't clean up
    and
    all the images messed up
    Any suggestion is appretiated!
    Thanks in advance

    I loved Ben's suggestion because it promised to be a low-effort workaround, but, alas, I get the same problem: "lvlib is already loaded from this path...".
    I tried Olivia's workaround for CAR 124214. It worked great for the simple lvproj that is posted above. (Hooray!) It didn't work so well in my real project, that has about 30 lvlibs and lvclasses. About 3/4 of the way through the save, I got a compiler error and LabView crashed. (Boo!) I submitted the crash log on this, but it's hard to imagine how anyone in R&D could make any progress debugging this without the source code. (And I can't submit the source because I can't export a copy of it!)
    Anyway, thank you very much Ben and Olivia for your suggestions. I have lvclasses embedded in lvlibs (primarily for organizational reasons) and since LabView tanked while saving one of those, perhaps the workaround doesn't work in this case. I may try again after removing the lvclasses from the lvlibs so that the hierarchy is flatter.
    -Rob 

  • Clickable image doesn' t work in the table

    Hi all,
    Our Visual Composer has been upgraded to sps12. And when I add an image to a form and assign it a hyperlink action, it does work well. But when I add an image column to a table and assign it the similar hyperlink action, it doesn't work. Does anybody know why?
    Thanks and regards,
    Dicky

    Hi Dicky,
    I checked it on our system, which is also on SPS12 and it works. I think your problem is, that you didn't click exact on picture. Not the whole cell is clickable for opening an URL. A solution might be to use a bigger picture, but when your user resize the column, then there could be another space which is not clickable.
    Another workaorund could be to use the fit size function of the image, but this cause a deformed picture and I also noticed that this function didn't work correctly.
    I will forward a link to this thread to Luis, who works for SAP in the VC QA.
    I hope he could solve this issue.
    Best Regards,
    Marcel

  • Stamping presets to multiple images doesn't work in 3.3?

    I used to be able to lift adjustments from one image select multiple images and stamp multiple images at once. This doesn't seem to work in 3.3. Can someone verify please?

    The hot key is ⇧⌘V  (in the main menu bar : Metadata > Stamp Metadata and Adjustments) and this hot key also works for me on multiple selected images, provided "Primary only" is not enabled, as William pointed out. But I usually keep the Lift & Stamp HUD open, to be able to deselect some adjustment.
    Regards
    Léonie

  • Background image doesn't work in dreamweaver 8

    I have dreamweaver 8 and trying to install a background image through modify>page properties>appearance.
    I created my background image through fireworks and saved it in my "images" folder.  However when I access it through dreamweaver, I'm not able to see it on my page. I can, however, apply my background color, but not my "bg.jpg" image.
    Why not?
    Can somebody help me?

    My guess is that your image might not be suitable for web output.
    Did you optimize your image for the web?  I don't use Fireworks but in Photoshop it's called File > Save for Web.  A typical background image that repeats horizontally and vertically on screen should have a filesize of around 10-20 KB.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb
    http://alt-web.blogspot.com

  • Sharing a mounted disk image doesn't work

    Hello,
    I'm trying to create a share point for a folder on an USB drive that is TrueCrypt encrypted with no success so far. TrueCrypt mounts the volume using a disk image - but that should not matter since the image is writeable.
    The folder is located on a Mac OS Extended (Journaled) formatted volume. When creating the share by dragging the folder into the File Sharing pane in the Server Preferences app, the folder seems to get the correct ACL permissions.
    In the Finder Info, the volume does not have "Ignore ownership on this volume" checked.
    This is the folder that does not appear in the AFP listing, although "Share this item using AFP" is selected in Server Admin.
    drwxr-x---+ 86 admin staff 2924 Jan 15 12:59 folder1
    0: group:workgroup allow list,addfile,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr, writeextattr,readsecurity,file_inherit,directoryinherit
    1: user:_spotlight inherited allow list,search,fileinherit,directoryinherit
    The strange thing is that the share appears in the directory listing when connecting via FTP as it's supposed to and the permissions seem to be fine (read/write ok). It also appears in the SMB share listing and can be mounted, but it's read only. Something's seriously wrong here, any idea what that could be?
    Thanks a lot,
    David

    Welcome to the discussions!
    +My question is... how can I have the remote disk auto-mounted upon connecting to the network?+
    Not sure if this will do what you want, but might be worth a look.
    Try System Preferences > Accounts > Login Items. Once you have clicked the Login Items tab, click the + (plus) button at the bottom of the list to display a Finder like interface. Navigate to the disk you want, highlight it, and click Add at the lower right.
    This should mount the disk when the computer is powered up. You will need to restart your computer for the change to take effect.

  • Call Manager Express Hunt Group roll over doesn't work correctly

    Hello,I have a wierd issue occuring on the CME portion of a client's UC520. Currently, I have a hunt group set up that has 1 user and then the auto attendant. Basically, I want to give a user a chance to answer the main line, and if she doesn't, it then roll's to the main auto attendant. This is working as long as I keep the time out on the hunt group under 12 seconds. The issue is that is about 2.5 rings. She'd like a little more time to be able to pick it up. When I put the time out above 12 seconds (say 16) and dial from an external number, it rings her phone correctly, then you can hear it attempt to transfer, but it transfers it back to her phone instead of rolling over to the auto attendant. You can even see on her phone that the transfer occurs and it transfers to herself. For an instance, it shows 2 calls with the same caller ID. Change the time out back under to 12 or under, and everything works great. Any help would be greatly appreciated.

    Sorry about that. Here is the IOS.
    Cisco IOS Software, UC500 Software (UC500-ADVIPSERVICESK9-M), Version 12.4(24)T, RELEASE SOFTWARE (fc1)
    And here is some relevant code.
    ephone-hunt 1 sequential
    pilot 501
    list 201
    final 401
    timeout 11
    no-reg pilot
    statistics collect
    destination-pattern 401
    b2bua
    voice-class sip outbound-proxy ipv4:10.1.10.1
    session protocol sipv2
    session target ipv4:10.1.10.1
    dtmf-relay sip-notify
    codec g711ulaw
    no vad

  • Converting an Outlook email with Images doesn't work

    I can convert any email from Outlook to a PDF and it will include all .doc and .pdf files, but it seems to just ignore any image attachments. I'm using Acrobat 11.0.06
    Is there a reason why or a solution to get around this? I need to maintain a database of all my applications and some come in as PDF's, others as image files.
    I cannot find an email address for Adobe either, bit fustrating.
    Any help greatly appreciated.

    Hi,
    Goto the Change Conversion settings option on the Adobe PDF tab in outlook.
    On the settings tab , unselect - "Block downlaod of external content"
    That should solve the issue for you.

  • [CS5] Using PDF Export Preset from Distiller with InDesign, doesn't work the same?

    Hello,
    We are in the process of reworking one of our workflows in which we would manually use Distiller to create a PDF. Now we are trying to automate this with InDesign. My first thought was that I could try using the same PDF Export Preset (.joboptions file) used in Distiller, load it into InDesign, and export my book as a PDF using this preset.
    For my current testing example, there are about 115 pages in this PDF document. The PDF that Distiller created is of pretty good quality, and is about 34MB. When I used the same .joboptions file to export an InDesign book of the same original documents as a PDF, the result is equal in quality, but is about 119MB.
    Does anyone know why they aren't even close in file size? Is InDesign packing more stuff (maybe related to the actual InDesign documents, or the book itself) into the final PDF? If so, is there anyway to get InDesign to give a similar PDF (in terms of both size and quality) using the .joboptions file from Distiller?
    Thanks in advance!

    Thanks for the reply!
    I won't be able to use Acrobat Pro, and my hope is to continue using InDesign/InDesign Server. Since my goal is to match what Distiller produces, is there a way (with InDesign) to export PDFs but to strip out the layers/interactivity/transparency that Distiller does not support? The output PDF will be used for archive purposes only.
    Thanks again for any advice!
    -Lloyd

Maybe you are looking for