Applying profiles: Did I do right?

I'll try keep this simple...
Objective
To supply a page advertisement as a press-ready PDF to publishers specification 1.3 PDF Ink density not to exceed 300%
Processes and Results
I downloaded and installed the following profile 'ISO coated v2 300% (ECI)' which seem to best match this fairly basic specification.
1. Open main image in Photoshop and save JPG with profile mentioned above applied. Placed image in ID_CS4. >Edit >Assign Profile and apply same CMYK profile to image. Export PDF/X checking same profile applied. Result = PDF >Output Preview: highlighted large dark areas exceeding 300 Total Area Coverage and not useable.
2. Same as above without applying profile to original Photoshop with same result.
3. Open main image in Photoshop and save as RGB .PS file with no special profile applied. Placed RGB .PS image in ID_CS4. >Edit >Assign Profile and apply 'ISO coated v2 300% (ECI)' to CMYK profile of image. Export PDF/X checking same profile applied. Result = PDF >Output Preview: almost prefect with only small number of pixels exceeding 300 Total Area Coverage. The colour looked good on screen and this is the file I sent.
Conclusion
Option 3 seemed to work ...it sounds as though it shouldn't but it did. I would be very grateful for any observations or simple explanations from prepress guru's out there. From my experience it appears that publishers are becoming more demanding with ad copy specs especially with online flight-checking delivery systems. I would like to expand my understanding and devise a simple work process that meets every requirement.
Thanks in advance
Steve

The reason option 3 worked is you made a conversion from RGB into the ISO coated v2 300% (ECI) CMYK profile during the export. There has to be a color conversion for a CMYK profile's total ink limit to be enforced—simply assigning a profile has no effect on total ink.
If you want to place CMYK make sure ISO coated v2 300% (ECI) is the destination CMYK profile when you make the conversion to CMYK in Photoshop.

Similar Messages

Imac 27" Intel Core 7 CPU. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware scan and all is fine. Did clean wipe from Mavrick back

Imac 27" Intel Core7 CPU 16 Gig RAM. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware diagnostic and all is fine. Did clean wipe from Mavrick back to Mountain Lion but problem remains. Apple Store can do no more.

I did some more digging, it appears to be a backlight problem only. I can see the screen very dimly if I use a bright flashlight in a very dark room. It also seems to run ok if the brightness is turned down a LOT.
So I'm thinking this is a LED driver board issue or the display itself. I'll open it up and check the connection between the two and see if I can get any more clues. At least I can use it somewhat now by dimming the display significantly...

Hi i am working with indesign on a book in hebrew. and the page numbering that i apply. showing from left to right insted of right to left. can you please help? thank you. iris

hi
i am working with indesign on a book in hebrew. and the page numbering that i apply. showing from left to right insted of right to left.
can you please help?
thank you. iris

Hi Shawninglewood,
Welcome to the Support Communities!
The article below may be able to help you with this.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Cheers,
- Judy

Problem Applying Profile - Windows computer Connecting to OSX Network

I have an Airport, whose network is being administered on my macbook pro, but my Dell Inspiron 1520 Laptop is not able to connect to due to "problem applying profile."
Is this because it has a g card trying to connect to an N network? Or due to it being windows connecting to osx?
Help

Make sure your Base Station is configured for b/g compatibility mode, if you are going to be using it with a computer only capable of b/g modes.
This error most certainly has nothing to do with "windows connecting to OS X" - which it is not. The PC running Windows is connecting to a base station, using industry-standard protocols, and not OSX.
Is this a PC from work, set up originally to connect to a company wireless network?
You can get a lot of hints and tips for issues that cause your problem by doing an internet search on the term "problem applying profile", because this is not an error message specific to users of Apple Airport base stations.

Query on Papyrus UML models with applied profiles

Hi everyone,
I'm using IncQuery for detecting changes on Papyrus UML models.
My UML models are applied with UML profiles created by Papyrus.
How can I query on models applied profiles that have the same stereotype name. How to distinguish stereotype name and UML model element name in queries?
For example, there is Connector and in the applied profile, there is also a stereotype named Connector. How can I use prefix name for this kind.
Thanks.

Since 1.0.0, you can name imports and use the name as a prefix for types:
import "umlNsUri" as uml;
import "myProfileUri" as profile;
pattern someP ( myParam : uml::Connector, myP2 : profile::Connector) {...}

LR5 Nikon 24-70 F2.8 Vignette Profile too bright top right corner on D4

I have recently upgraded to LR5 from LR4. I've noticed that the top right hand corner of my shots with the 24-70 2.8 seem to have a bright corner when lens correction is applied. Otherwise I'm loving the new upgrade. Any ideas? I've tried resetting and I'm still getting it. Do I need to download different profiles?
Many thanks
Si

There are (or can be), of course, editable regions in the head of a document. Typically, around the <title></title> you will find 'space' to put links etc, and meta tags:

<title> Your title here </title>
<meta name="description" content="Description here." />
<meta name="keywords" content="keywords here " />
<meta name="robots" content="index,follow" />

Further down in this same document, I find:

<link href="styles.css" rel="stylesheet" type="text/css">
<style type="text/css">

</style>
<script src="../Scripts/swfobject_modified.js" type="text/javascript"></script>

showing a stylesheet link and an embedded style.
So it's not so much that you can't have editable areas in the head of the document, it's more that you can't overlap or improperly nest ANYTHING.
You can also (am I repeating myself?) make a tag's attributes editable. I use that feature most notably for applying different IDs to <body> tags for different neighborhoods in my sites. By applying different body IDs, I can control more specifically elements on those pages. But that's a conversation for another time!
Best,
Beth

JRMC4.0: Method profiler not picking the right class instance

Testing with JRMC 4.0 + R28 1.6
Method profiler works on unit-test cases. However, when using it on a large scale application, it did not work properly for some of the classes and methods (zero invocation count).
I searched internet and saw some ppl mentioning about multiple class loader could result that weird behavior. I only using one simple spring class loader, therefore don't know how to resolve it...
Any suggestion would be appreciated...

Thanks Erik. The issue is resolved without me doing anything on the application side... I switched back to JRMC 3.1.2, and it works fine.
Not sure if it's worth looking into to see what's new in 4.0?

Old version of FF died, downloaded new, would not launch, created new profile (did NOT show any old profiles, did NOT delete an old profile). Looked for old profile, none seem to exist. Nothing in library folder. Help. Need those bookmarks back!

managed to open the terminal app, and create a new profile. Went looking for older profile and ...nothing. there is NO firefox/mozilla folder in library/application support. I searched for "firefox" on the hd and didnt recognize anything that could/would be the profile folder. i did search my trash as well. help please :-(

You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
In Mac OS X v10.7, the $HOME/Library folder is a hidden folder.
Open Finder and use one of these:
* Go > Go To Folder (Shift-Command-G) and in the dialog type: ~/Library
* Open the "Go" menu and hold down the Option key to make the Library appear
You can also use this command in a Terminal window to remove the hidden flag.
* Mac HD > Applications > Utilities > Terminal
* chflags nohidden ~/Library
* http://kb2.adobe.com/cps/909/cpsid_90947.html Access hidden user library files

How to stop Bridge from automatically applying profile to images?

Adobe Bridge (CS6) seems to always automatically apply lens profiles (vignetting correction) to my photos. I don't want it to do this, I want the images to have no corrections applied by default. How can I do this?
Thanks
Dave

Assume you are talking about Camera Raw. Depends on what you have set for defaults in ACR. You can set up your own preferences and make that the default.
There is also a camera raw fourm at http://forums.adobe.com/community/cameraraw if you have more indepth questions.

Adding a shared mailbox to a user's Outlook profile, who has reviewer rights only, via PowerShell

Hello Everyone,
I'm working on trying to create something like a knowledge base for my company, and what I'm trying to accomplish is to create a shared mailbox on 365, add users to have read-only rights to the Inbox (which I can achieve via PowerShell) so they can't delete
the articles, but it seems that by just adding Reviewer permission to a user, it doesn't force the mailbox to open on the end-user's Outlook profile - it only seems to automatically populate if I go through the exchange admin console and allow Full Access
through User Delegation.
Is there a way, via PowerShell, to open a shared mailbox in a user's Outlook profile?
Thanks for all the help!

Hi,
We can create a PRF file that modifies the existing Outlook profile to add the shared mailbox.
Please have a look at this thread which discussed a similar issue:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/374e5a31-1732-45b8-afdd-7c0987e04a7e/how-to-add-additional-mailboxes-in-outlook-for-exchange
For more information about Customize Outlook profiles by using an Outlook Profile (PRF) file, see:
http://technet.microsoft.com/en-us/library/cc179062(v=office.14).aspx
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

Bluetooth profile DID

How can i check Bluetooth DID profile in the following mentioned Phones 1. Sony Xperia Z2 2. Sony Xperia ZR 3. Sony Xperia Z ultra 4. Sony Xperia Z1 and also what is difference between DID profile support and non supported phones? Kindly do the needful

You have quite a number of Xperias, do you have them all to test them?
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Roaming profiles did not work with Novell client

I've Problems with roaming profiles.
It is perhaps not a Novell problem but anything with windows rights?
We use ZCM11: (Server: SLES11 SP1)
Client new PC with a freshly installed Windows7, all updates.
(Only Turn on file and printer sharing, anything else default, no virusscanner)
The pre-agent has been installed and then the the Novell Client 2SP1 IR7
The PC gets a "Dynamic Local User Policy" with the settings:
- Use the credentials of the user source
- (Manage existing user account - but we have none there)
- Volatile user (with no cache, meaning that the user is immediately deleted ... We have also tested with cache.)
- e-dir user should be only member of Users
The users from edir get a Roaming Profile Policy with:
- Store user profile in user's Home Directory. (which is on the OES/SLES server)
---- results ----
If the user has no centrally stored profile, then he can log on but just once!
(if "Enable Volatile User cache" also several times to the same PC)
If the user already has a stored profile, he can not log on Error: "The Group Policy client service failed the logon Access is denied"
In my view, the following happens. W7 create the user locally and want's put in the settings from a central profile in the local
Profile and can not do that.
Only when no "central profile" is there in the homedir, or if this profile does not contain the file ntuser.dat, the user can log in locally.
However, no files are used from te saved profile, for instance from the saved desktop.
I can not imagine that anyone around the world with ZCM11 on a SLES/OES Server don't use the Novell client and raoming profiles
It must therefore give a simple trick to solve the problem.
But which one? Can some one here help me?

Alix,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Thunderbird shows 3 default profiles? Is this right? I just installed it and recovered my profile from another computer.

My previous computer's hard drive said it was failed. I copied off the thunderbird profile before it crashed.
I bought a new computer. I restored the thunderbird profile. Within a few hours, the email and file folders revert to a 2014 data file any anything from that time forward does not appear. So I went in, uninstalled thunderbird, deleted all the thunderbird profiles and their files and put it back on again. Within a couple hours, it did it again.
So I again uninstalled thunderbird, searched everything thunderbird and deleted all I could and downloaded a fresh copy of thunderbird and then restored the profile again. Within about 30 minutes there are now three different default profiles for thunderbird. I don't know what else to do. The e-mail files aren't changed yet, but I'm waiting...... Are three supposed to be there, I would think not. I certainly didn't create them. Somebody know what to do??????

''Are three supposed to be there''
No, Thunderbird would create a new profile upon start if it can't find an existing profile.
''I restored the thunderbird profile.''
How exactly did you do this?

White is still Yellow in all Adobe programs - Changing color profile did not work!

I followed some other threads, and their advice was to change the color profiles. I did that, I am running on windows 8.1 and in photoshop, indesign and illustrator my whites are still yellow.

Have you got the correct colour profile installed for your hardware? or even try turning colour management off to see if that fixes the problem

Apply profile to AnyConnect Secure Mobility Client 3.1

G'day Gurus,
I have created a profile for Network Access Mnaager using Standalone version of Profile editior.
May I know the steps to deploy on end node?
Cheers,
Ahmed.

You can use altiris or sccm to push the configuration.xml file to the end client (for mass deployment), or copy the file to the directory and then have to restart the NAM sevices. Here is some reference material that may help.
https://supportforums.cisco.com/docs/DOC-23117
Thanks,
Tarik Admani
*Please rate helpful posts*

Applying profiles: Did I do right?

Similar Messages

Maybe you are looking for