Applying rule to delete message with "no sender"

Trying to reduce this onslaught of junk mail that Mail indicates has "no sender" (although I didn't think that was possible, but spammers are a clever bunch of scum). Leaving the filed blank doesn't work obviously, nor does typing "(no sender)". Online help is not any.

... Leaving the filed blank doesn't work obviously, nor does typing "(no sender)".
Try
Header 1
Header 2
Header 3
From
Does not contain
A valid email address must contain a @ character, right?
Same logic applies to a . (dot) character if you want to try that. I have never seen an email address not in the form [email protected]
Let me know if this works. I don't know how to send an email to myself with nothing in the "from" field so I can't test it. Not clever or scummy enough I suppose.

Similar Messages

  • Recently my iPhone 4s receives "phantom" SMS messages with the sender "unkown" dated 1/1/70. I delete the MSG and it appears again, and idea how to permantely delete them? I have reset my phone also.

    Recently my iPhone 4s receives "phantom" SMS messages with the sender "unkown" dated 1/1/70. I delete the MSG and it appears again, and idea how to permantely delete them? I have reset my phone also. Haven't done a hard reset.

    Same issue with my girlfriend's iPhone 4.
    I also started a thread at  https://discussions.apple.com/thread/3611603
    if you find any solution yourself let me know and ill do the same

  • Delete messages with "Cancelled Manually" state (MSGSTATE is 21)?

    Hello,
    I want to delete messages from master table SXMSPMAST which are in "Cancelled Manually" state i.e. the value of field MSGSTATE is 21.
    I have tried running reports "RSXMB_ARCHIVE_MESSAGES" and "RSXMB_DELETE_ARCHIVED_MESSAGES" but with no success. the vlaue of the field ITFACTION is ARCH.
    Can anyone guide me how do i delete these messages?
    thanks,
    Yash

    Hi Yash,
    in productive sysems the messages with status 21 can not be deleted by the regular deletion report, it has to be archived first and then will be deleted by the archive job itself. so you have to configure archiving.
    for non productive systems you can set the parameter ARCHIVE->PERSIST_ARCH_MANUAL_CHANGES to delete the manually changed messages, afterwards it will be deleted by the regular deletion job.
    please check the SAP note 872388.
    manually cancelled or manually changed messages (status 019 and 021) have to be archived. Therefore you always have to configure archiving to handle manually edited messages. Should you decide (for non-productive systems only) that you would like to delete these manually cancelled messages, please refer to Note 820149
    Thanks,
    Francis

  • Delete message with message id x from broker through API

    hi *,
    is there another way of deleting a message than consuming it via specific message selector like ID = x?
    i thought there should be another management API functionality to delete messages from a broker? am i wrong?
    regards chris

    hi isahashim,
    sorry i did not read this thread to the end before posting this...
    we are using JMQ just by using JCAPS
    ONE BIG QUESTION....
    with this "unsupported" API will there be the possibility to connect to JMQ brokers that are not embedded in CAPS environments ?
    we are using them in CAPS V6 because clustering works better when broker is in REMOTE mode (has his own JVM) and EMBEDDED mode has several issues afaik.
    regards chris

  • Can't Erase deleted Messages with apple-K keyboard command anymore...?

    Last few weeks I've noticed that the keyboard command Apple -K will no longer erase deleted message....has anyone else experienced this problem, and if so, is there a workaround? Thanks in advance...
    Dual 2.0 Ghz G5, 1 GB RAM, 10.4.3
    Power Mac G5 Dual 2 GB (first gen)   Mac OS X (10.4.3)  

    Same experience here. Addidionally, while I had more than one account configured, for a while, %K would pop up a new dialog box, asking for confirmation. That was unwanted new behaviour too, I think. The dialog box went away when I removed the inactive account, though.
    It's not just deleted messages that don't go away: it's the remaining copy of messages moved into other mail folders, too. This leaves "deleted" copies of messages littered throughout my (extensive) imap folder hierarchy. Aargh!
    The only work-around that I've found is to use another mail client program to clean up the mail boxes.

  • Selectively deleting messages with POP.

    Hi All,
    So I've yet to figure out how to get IMAP working my Yahoo email because I've got a @pacbell.net domain name... So I'm using POP for now.
    On my last "smart" device, the Palm 650, using POP, you could choose to delete messages that you've downloaded 1) on the device 2) on the server or 3) on both. I haven't figured out how to do it on the iPhone.
    Am I missing something or is that feature missing?
    - Thanx
    - Jon

    PTBoater, thanks for the note. It looks like the "when removed from inbox" option would do what I want, but it doesn't seem to work for me...
    Is there some trick to using this feature? Messages deleted, another POP access initiated from the iPhone, time waited, no server deletion...
    In fact, that setting doesn't appear to persist - after setting it, going back in to ensure it's set, waiting 10 mins, the setting goes back to "never"...
    - Thanx
    - Jon

  • Deleteing messages with status 003 in persistence layer

    Dear All
    my XI DB is getting bigger and i have found that after running the report RSXMB_SHOW_STATUS , it has Message Status:      003 Number:          5.400.374 messages in DB .. my question is how can i delete theese messages from XI ? what need to be done after delting theese from DB ? will reorg is sufficint ?
    apprciate your urgent sujestion in deleteing status 003 (5.400.374) messages permently from the DB ( please see the extract from the report also)
    Regards
    Buddhike
    Number of Messages in Database:
    6.180.784
    Number of Messages in Client:
    6.180.864
    Number of Messages for Reorganization in Client:
    6.180.927
    Number of Messages to Be Archived in Client:
       182.896
    Number of Logically Deleted Messages in Client:
             0
    Number of Archived and Logically Deleted Messages in Client:
             0
    Message Status
    ==============
    Message Status:      001 Number:             28.971
    Message Status:      002 Number:                  0
    Message Status:      003 Number:          5.400.374

    Hi Buddhike,
    To me it looks like you are missing setup of archiving/deletion of messages in the SAP PI system.
    Please refer to these:
    http://help.sap.com/saphelp_nw04s/helpdata/en/f5/d347ddec72274ca2abb0d7682c800b/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/41/b715015ffc11d5b3ea0050da403d6a/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/0e/80553b4d53273de10000000a114084/frameset.htm
    Best regards,
    Jacob

  • Erasing deleted messages with IMAP

    My work email account is setup as an IMAP account and is set to just mark deleted messages (and hide them from view, not move to trash). So I've got a smart mailbox setup to collect messages older than a certain date so i can erase really old messages.
    So my question is this: If i right click on the smart mailbox and click "erase deleted messages" will it erase only the messages in this smart mailbox or will it erase all deleted messages in my whole email account?

    awesome.

  • Cannot send or delete message with many recipients

    I was sending an email to about 150 people from my address book. Mail came back with a warning that the server did not recognize the email addresses. My guess is that there are so many email addresses in the BCC box it thinks its spam (but I'm just guessing). Anyway, there are so many recipients listed that the dialog extends below the bottom of the screen so that the option buttons are unavailable. And, the window does not have a close box, only minimize and full screen (amber and green). I've tried force quitting then restarting Mail but I cannot intercept the email as the app starts up, and so the dialog comes up repeatedly. Anyone know how do I clear this?
    Thanks

    I had the same problem this morning. Hit the return key to close the warning box. Fortunately, the button you need to push is the one that will be activated with the return key.
    As for the problem with sending a message to a large group, I am at a loss. I am considering ditching Mail for this reason and others. It took me hours to get all the email addresses into the address book, and now this crap.
    Anybody have some insight here? Apple? Help? Somebody??

  • Unsent message with Invalid Sender Address: NOT in OUTBOX!

    I have an unsent email that is stuck "somewhere", the result of accidentally entering the incorrect email address when modifying a mobileMe account. When it tries to send, I used to get "Sender Address Invalid". But there are no messages left in the Outbox to delete.
    So now at the bottom center of the MAIL screen it says "1 Unsent Message". And every so often it'll try sending it ("Sending 1 of 1). But then it'll just stop -- with no messages.
    Restarting the iPhone doesn't clear it out.
    Where is this message sitting? And how does one zap it?

    One thing that might help out.
    Go to settings > mail, contacts, calendars > your mail account.
    Then tap on smtp to view all your servers.
    Make sure your primary server is on.
    Then go through and turn on all your secondary servers.
    Go back into mail and see if you have an outbox with an unsent message.
    Hope this helps.

  • Forward & Deleting messages with ios 8 software

    Can not forward or delete individual messages anymore with IOS 8 software update.
    Iphone 5s
    IOS 8

    Nvm its working now

  • Mac mail not syncing deleted messages with iPad email?

    I'm very frustrated with the mail sync between my MacBook and my iPad. My Microsoft Exchange (@student.uml.edu) email for school will NOT sync between my Mac and my iPad.
    When I delete mail from from Mac mail, it does not delete on my iPad. This has led me to have 3 read emails in my inbox on my MacBook and 45 emails on my iPad. I can't imagine having to keep track of deleting emails from my laptop then again on my iPad thats just silly.
    Am I doing something wrong here? Help!

    I have the same problem in the opposite direction - I can delete things on my iPad but they don't delete on my MacBook and Mail won't let me delete them. My problem is also with an educational Exchange account. Other accounts sync without problems.

  • Error Message with Form Sending

    Hi there,
    My form is working fine and the PHP is fully functional,
    however I get this error message once the form has been submitted.
    Error: Error #2101: The String passed to
    URLVariables.decode() must be a URL-encoded query string containing
    name/value pairs.
    at Error$/throwError()
    at flash.net::URLVariables/decode()
    at flash.net::URLVariables$iinit()
    at
    flash.net::URLLoader/flash.net:URLLoader::onComplete()
    Does anyone know what this means?
    Here is my function that sends the message
    function sendMessage(event:MouseEvent):void
    var contactVariables:URLVariables = new URLVariables();
    contactVariables.custName = textName.text;
    contactVariables.custEmail = textEmail.text;
    contactVariables.custPhone = textPhone.text;
    contactVariables.custSubject = textSubject.text;
    contactVariables.custMessage = textMessage.text;
    var postMessage:URLRequest = new
    URLRequest("mailContact.php");
    postMessage.data = contactVariables;
    postMessage.method = URLRequestMethod.POST;
    var loader:URLLoader = new URLLoader();
    loader.dataFormat = URLLoaderDataFormat.VARIABLES;
    loader.load(postMessage);
    gotoAndStop(2);
    As mentioned before, my form does work fine. Anyone know what
    the problem could be??
    Thanks
    CM

    Ok ive figured out that Flash does not like the '&' sign
    when data is sent back to it as a string. The thing that I dont get
    is that my PHP script does NOT send the data back to flash. Why oh
    why is this message being displayed?
    Also ive discovered that on some machines it does not display
    the error at all. I just don't get it. Anyone had this problem
    before?
    Thanks
    CM

  • Create Transport rule for restrict message size and send a rejected message CC: to Administrator

    I want to create a Exchange Transport rule for message size restriction (10 MB) when message size is exceed to 10 MB it rejected by the Exchange server and
    also rejected message CC: to Administrator. I also create it but unable to configure rejected message CC: to Administrator. Thanks.
    Babu

    Hi Babu,
    I have some tests in my environment using Exchange 2013, you can create a transport rule such as follows to achieve your goal.
    Hope this can be helpful to you.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact 
    [email protected]
    Amy Wang
    TechNet Community Support

  • Can't send message with FaceTime "send" button no lit

    I can't send a message in FaceTime messenger. I can type in the text box but cannot send. Send button is not highlighted.
    Why?

    Jweatherly wrote:
    I can't send a message in FaceTime messenger.
    What is "FaceTime messenger"?
    FaceTime is for video calls, not messaging.

Maybe you are looking for