Applying Same EQ Ajustiment to Another Sound Clip -- Please Help
I have been working with the Gain and Channel EQ's on a sound clip to raise audio levels and adjust sound levels, etc. How can I apply the same adjustment I created on a clip to a different audio clip (that follows immediately after for the same sound, etc.) I know there is a simple way to do this...but I don't know how.
Please let me know.
Thanks.
If the different clip is in the same environment and same type of sound as the first, you could just create a preset with your settings and apply it, or if you're in a multi-track project, group these clips together on one track and put the EQ on the entire track.
If the different clip is not in the same environment and you are trying to get them to match, you could try EQ matching in the processing menu. Take a snapshot of your EQ curve, apply to the 2nd clip. Haven't tried it myself, but give it a go.
Similar Messages
-
I want to bring over music from my iTunes library on iMac to an ipod touch with another apple id. please help. Is this possible. In former versions of itunes this was posible. I can't find the solution is iTunes 11
Perhaps those apps require a newer version of iOS than is compatible with your iPod.
-
I currently have no sound on my HP Spectre XT Ultrabook PC!!! Upon buying the laptop it had Beats audio on the laptop. That stopped working recently, but I still had the normal reduced audio, until that stopped completely soon after. I have tried multiple things to fix this problem, all without success; I tried troubleshooting the problem, I tried updating the audio driver (it said I already had the most current version), I tried uninstalling and reinstalling the driver, I tried updating the BIOS on my computer and NONE of these have worked; I still have no sound! Please help to fix this problem!
The product number is B6V42PA#ABG and it currently has Windows 7 Home Premium installed on it!Hi
Please try doing a system restore to the date where unit was working fine. In case this does not work last option is to run a recovery please back up your data. This does not work please call HP technical support & get the Speaker replaced.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
i just bought an airport express. i set it up and was able to be detected by my macbook, but i still cant connect wirelessly. the same goes when i tried my iphone. please help!
Is the status light green?
Your Airport device may be in Bridge Mode.
Airport Utility 6:
Open Airport Utility, select the Airport Express and click Edit. Navigate to the Network tab and change Router Mode to DHCP and NAT. Then click Update on the bottom right.
Airport Utility 5:
Open Airport Utility and click Manual Setup. Navigate to the Internet icon and change Connection Sharing to Share a Public IP Address. Then click Update on the bottom right. -
I cannot transfer my music from my itunes to my iphone 5s after i connected my iphone to another laptop yesterday. please help me out
If you are trying to drag a song over, do you have Manually Manage Music checked in iTunes? You need to check your iTunes settings before trying to put music on it. It may be that you have it set to sync. Check the Summary page of iTunes after you have selected the iPhone in iTunes.
-
Hi, i buy new phone in ukraine,but when i try add new device on my apple support profile,it says that serial nuber already used by another apple id please help what can i do?!thx
You purchased a gray market phone. The iPhone is not available for sale from any Authorized source in Ukraine. There are no authorized or supported carriers in Ukraine.
Take it ack and get your money back.
If you want an iPhone, go to a country where unlocked iPhones are available for legitimate sale and purchase one directly from Apple. -
im not able to connect to app store with my apple id after i trying to logout and connect with another id. Please help.
The app store has been down for over 8 hours. The following can be used to check on its current status: https://www.apple.com/support/systemstatus/
-
Apply same effect to a collection of clips?
I am on Premiere cs6. I have a collection of travel clips (100+) that were shot handy held and were a little shaky. I tried using the wrap stabilizer effect on some of them and it helped. Instead of opening each video clip one by one, apply the effect, and export the result. Is there a way to apply the same effect on a collection of clips and then export the result?
Sure you can. When you add an effect to the tracks rack, you can reveal an envelope for each adjustment parameter of that effect in envelope section just under the track. An example of studio reverb is shown below, and by adjusting the wet output level, controls the level of the effect on the clip over time.
There's a lot to explore using envelopes, and you also change the curve to splines if you wish.
A lazy mans workaround is to add a duplicate of the clip into a new track with the effect applied (removing or disabling the effect from the other clip), then envelope that new track's volume to blend with the mix, thus achieving a similar effect. Make sense? -
I need to get photos off a water damaged iPhone 3GS. It spent time underwater, saltwater. I let it dry for a week, turned it on, the apple symbol came on, then it died. I need to retrieve my photos off it. Can I take out the component that has the photos (is this the main board?) and put it into another of the same phone to retrieve the photos? Please help
You're talking about the logic board. The two most likely things to get toasted, with water damage, are the battery(it shorts out), & the logic board. The worst water damage would be salt water. I'm afraid your logic board is toast.
-
Missing recording clip - PLEASE HELP!
Recording some speech clips in GB and went back to them this am to find them missing... I did discover that if I move the clips back and forth through the track, they shorten (cutting off) other clips that take up the same space... So if I slid a recorded clip over too far, and it covered over my previous clip is it gone forever?
I'm working on a senior project and it's due tomorrow and now I'm missing audio
PLEASE HELP ME!I was afraid of that.
I wish that didn't happen. I would think that if you slide a clip over, it might push the other clips along with it, or hide it underneath or something to prevent loss of data...
I think ACID worked like that.
bummer.
thanks. -
Hello, An year or 2 ago, I bought this HP computer, a DX7200 Slim Tower. Due to it's poor performance, I decided to buy another GPU, an Asus R7240. I installed it, and then noticed the sound was not working anymore. To my understanding, it was because the sound card was no longer detected. Fastforward half an year. I just decided to play my games without sound. I then moved a considerable distance and had my computer shipped over in a truck. While in truck, my computer was probably shaken a bit and the graphics card was no longer properly "plugged" in the slot and thus didn't work. I started my computer without knowing this and then noticed that I could the sound was working. I also noticed a severe issue with my FPS on games so I figured that there must be a problem with the graphics card; I therefore opened my case, put the gpu back how it should be. And then I start my computer and notice that the sound is no longer working. tl;dr GPU= No soundNo GPU= sound I really want to fix this now, please help me! This is a screenie of what I see wen I click on "playback devices"
Satellite A105-S4384
Try reinstalling this driver.
Realtek Audio Driver for Windows XP/2000
-Jerry -
I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help
HDCP maybe? Read this http://www.macnn.com/articles/08/11/26/displayport.drm.conflict/
-
My I pod is disabled and i don't remember the password but it doesn't give me another option.
please help!Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
When downloading the latest version of itunes the download freezes everytime but not always at the same percent. I have tried selecting the download only option and still didnt work. Please help!
Do you have Windows XP Pro?
see https://discussions.apple.com/thread/5840089?tstart=0
there is a stupid checkbox you must uncheck, saying "protect my computer and data from unauthorized program activity"
You see this screen when you right-click on the ItunesSetup.exe in your Downloads folder.
downloads>ItunesSetup.exe (right-click)>yourself as admin & UNCHECK THAT BOX!> conntinue with new installation and even find your old playlists still intact!!
This is apparently a Windows XP fix alone. MSVCR80.dll is (probably) reinstalled by Itunes under a partnership aggreement with Microsoft.
Using the Microsoft "Fix It" utility at http://support.microsoft.com/mats/program_install_and_uninstall/en does NOT fix anything. Abandon All Hope Ye Who Run This Utility More Than Once -
Front panel sound.. please help
hi,
My motherboard is MSI 915G Combo. It has CMEDIA AZALIA sound chip which supports multistreaming functionality. The sound output can be taken from frontpanel as well as backpanel audio connectors. But the frontpanel connectors are provided as pins in this motherboard. I got a Mercury KM08 ATX cabinet which has frontpanel ports. But how can I connect the pins?? The cabinet have wires to connect the pins to frontpanel.
There are 7 wires for front panel connectors in cabinet which are
1) Line out FR
2) Line out RR
3) Line out FL
4) Line out RL
5) MIC IN(R)
6) GND
7) MIC Power (L)
In my mobos manual the front pannel connection design is given as,
Pin1 - PORT 1L - Analog port 1-left channel
Pin2 - GND - Ground
Pin3 - PORT 1R - Analog port 1- Right channel
Pin4 - PRESENCE# - Active low signal
Pin5 - PORT 2R - Analog Port 2-Right Channel
Pin6 - SENSE1_RETIRN - jack detection return from front pannel jack1
Pin7 - SENSE_SEND - jack detection sense line
Pin8 - KEY - connector key
Pin9 - PORT 2L - Analog Port2-left channel
Pin10 - SENSE2_RETIRN - jack detection return from front pannel jack2
Please help me to connect the pins to the frontpanel connectors of the cabinet!!!!
also whats are jack sensing pins?? what are they used for??Jack Sensing is a feature that allows the codec to choose what kind of device (mic, speaker or line-in) you're plugging into the jack by sensing its impedance. It's of no use here for your front panel chassis.
What I would try is to match the PORT 1L/1R with your Line Out FL/FR, and PORT 2L/2R with LineOut RL/RR. There is no MIC connection I guess from the pin names.
Maybe you are looking for
-
Can you use iCloud with garageband on a mac?
i know you can use it on a phone and ipad.but i cant figure out how to do it with mac.(i want to upload songs on there to access from other devices)
-
Where is the search field in Safari 6.0?
I have completed the Apple Software update today of several programs, but have not yet updated to MT. Lion. My Safari browser now seems to be lacking a search box/field in the upper right. I think that prior to the update there was such a box in th
-
Not able to use Alert Configuration/Alert Inbox in the Runtime Workbench
Hi Experts, I have installed PI 7.1 on my system. I'm not able to use the Alert Configuration/Alert Inbox in the Runtime WorkBench. It is asking for a logon and the logon which i used for ABAP & Java Stack is not working. e.g., For
-
Error message when Using SMS portlet
Hi all I'm using OracleAS Portal 10.1.4. I downloaded OracleAS SMTP Portlet from oracle web site http://www.oracle.com/technology/products/ias/portal/point_downloads.html and i read the Release Notes to install it. After installation of SMS portlet ,
-
I am trying to reinstall Adobe photoshop elements 3.0 on windows system 7 and it keeps asking me for a serial number which i cannot locate. How do I go about getting the serial number?