Applying SOA with E-business

Hi,
My company have oracle E-business suite application as the main application , and others service applications each of them with different tools and different databases and servers.
My manger asked me to search how we can use SOA application in the company, how we can use it and the how to implement it including tools/ hardware and all needed information to start a project like this.
Actually I got confused as I know SOA is a Service Oriented Architecture, there is no standards that should be applied and each case has to be studied.
Can anyone help me from where i should start my search , what the documentation that I should provide should contain ?
Thank you.

Hi,
Please see the following as it will help you:
Oracle E-Business Suite Integrated SOA Gateway Release Notes, Release 12.1.1 (Doc ID 565922.1)
Oracle E-Business Suite Integrated SOA Gateway Release Notes for Release 12.1.3 (Doc ID 1096553.1)
Integrating Oracle E-Business Suite Release 12 with Oracle BPEL in Oracle SOA Suite 11g (Doc ID 1321776.1)
Installing Oracle E-Business Suite Integrated SOA Gateway, Release 12 (Doc ID 556540.1)
Configuring Oracle E-Business Suite Integrated SOA Gateway Release 12.1.2 and Release 12.1.3 in a Multinode Environment (Doc ID 1081100.1)
Thanks &
Best Regards,

Similar Messages

SOA with E-business suite

Hi,
I want to know something about SOA, and if the same can be integrated with E-biz suite ?
What would be the benefit of this ?
Thx.

Check the following links:
Enabling Adaptive Business Processes: Oracle E-Business Suite and Service-Oriented Architecture
http://www.oracle.com/products/middleware/docs/oracle_ebs_and_soa.pdf
Service-Enable 11i -- Get A Jump On Fusion
http://blogs.oracle.com/schan/2006/07/24
Leveraging Service-Oriented Architecture for E-Business Suite Integration
http://www.oracle.com/technology/products/applications/integration/1147_EBS_and_SOA.ppt
Oracle Applications Integration Cookbook: A Developer's Guide
http://download.oracle.com/otndocs/products/integration/oracle_apps_integration_cookbook.pdf

Jabber call to voice mail fails with fast busy over VPN

I have an issue that I ran into with CIPC phones over a VPN. If a CIPC phone called over a VPN and started ringing a phone the call would fail with fast busy at the time the call would be forwarded to voicemail. I found the issue was when remote the CIPC phone would negotiate the g.729 codec, when forwarded to a voicemail pilot over a SIP trunk set to g.711 the call would fail due to codec missmatch when no transcoders are present.
So now I am running into what I believe to be the same issue with Jabber, when on premise the calls to voice mail work just fine, but when remote they fail. I can directly call the voicemail pilot without error, but if calling a phone the call gets fast busy at the point we are forwarded to voicemail. Even though all my regions are set to talk to all other regions on G.711 and the voicemail SIP trunk is set to G.711, I believe with the new features in CUCM9 that a lower speed codec has been negotiated since the we are going over the VPN, or Jabber has done this as it knows it's over VPN (not sure). WIth CIPC I could go into the settings and turn off the Optimize for Bandwidth check box and the call would negotiate G.711. With Jabber I can't find anything that would tell my Jabber client to stay on G.711 and I can only imagine this is a codec missmatch as the following are true.
1. CIPC and Jabber share the same line
2. VPN established and CIPC optimised for low bandwidth un-checked
3. Over the same VPN the CIPC phone can leave a voicemail
4. Over the same VPN the Jabber client gets fast busy once forwarded to voicemail
5. Voicemail environment is Exchange-UM over SIP trunk
6. SIP trunk is assigned a Device Pool, that is assigned to a region that all other regions communicate G.711 to
7. On CIPC if optimised for low bandwidth is checked I get the exact same issue as I get with the Jabber client (fast busy when forwarded to voicemail)
Would anyone know what I can do in CUCM 9 to fix this issue, as said no issue when all devices are on premise. Wondering if there is a service parameter or a way to change the codec selection so the Jabber client attempts to always negotiate G.711. The correct answer would be to get some PVDM DSP resources and kick up a transcoder in my resource group, and that may be what I talk them into doing if I have no other options.

We have been getting the exact same thing for almost a year now... since switching to FiOS Digital Voice in May of last year! Every time I call in to report it they 'escalate' the issue but it never gets resolved. The problem seems to be in the initial connection. Most of the time it works fine but, several times a month, after I call to get messages and it starts to play the new message it goes dead and I get the busy signal. I get the same message when I call back: “I’m sorry – that account is in use at this time. Please try again later!” I have even called in with my cell phone and get the same message! I HAVE EVEN used the Internet to see if I could get my messages and, when I hit Play, I get a pop-up saying: “Your Voice Mail box is currently in being accessed; please try again later. If the problem continues, please contact our Customer Support Center at 1-888-553-1555. We apologize for any inconvenience.” This is obviously a software bug that Verizon has no clue on how to troubleshoot OR fix!!! I wonder how many people have the problem and just don’t bother reporting it because of the hassle? When it first started happening they destroyed my entire mailbox and I had to re-enter the complete mailbox setup again – 3 times!!! NEVER let them talk you into that!!! It’s their problem and they need to fix it!!!!!!! I wish I could go back to the ‘normal’ voicemail we originally had… they want hundred$ to switch back because I’d be breaking my #$@%^&* contract! Good luck if you have Verizon………

Issues with connection busy functionality

Here are a few things I've noticed with the busy connection functionality:
If I want to right click in a SQL worksheet window while a tab has a query running (current or different tab) I get the "connection busy" error. Don't know why this is b/c right clicking should not be contacting the DB so it's not like I'm trying to run another process or something.
I had one tab with a basic select statement and another that was running another script that was taking a while to execute. The tab running had a bunch of insert statements running but not in a pl/sql block. The script had 15,729 inserts. When I tried running a statement on the other tab, I recieved the "connection busy" error, and I clicked abort. Instead of not trying to connect, I kept recieving the "connection busy" error over and over. The second tab came back with results finally. When my other tab with the insert statements was done, I checked the number of rows in my table - 15,717! So it looks like when I was clicking abort the other script was skipping statements or something! Good thing I double checked b/c this nasty little bug would have caused me some grief in the future.

The connection-busy-abort-retry dialog is popped us when a JDBC operation is being performed on the connection and another such operation is requested.
SqlDeveloper uses single connection/session everywhere, so in your case, in the second worksheet, the same connection was being used which was busy through the operation in first worksheet.
Right click on the worksheet, does some JDBC operation, hence you got the dialog in second worksheet.
One workaround is to use unshared sql worksheet (ctrl-shif-n in a woeksheet).
A better solution for above issues is being worked on by the development team that should give you better concurrency and responsiveness.
This would be available in next major release of Sql Developer.
-Raghu
dev. team.

I am an iPad novice and whilst I have managed to set up my personal email, I have having trouble with my business email in that I can receive emails, but am unable to send and the message says 'this email address has been rejected by server'

I am an iPad novice and whilst I have managed to set up my hotmail account on the iPad - I ham having trouble with my business email (I can receive emails, but cannot send and it says' email rejected by server'

That sounds like a settings issue to me. Check with your IT depatment to make sure you have it configured properly.

My Macbook browser is not compatible with a business website I must use for work. Is there a Windows compatible browser for my Mac?

My Macbook browser is not compatible with a business website I must use for work. Is there a Windows compatible browser for my Mac?

If the site has been optimised for IE (which is non-standards compliant), the best you can try is to spoof IE from Safari.
I'm using an earlier version of Safari than you, so I hope Allan or someone will correct me if the procedure is different.
First, go to Safari Preferences and enable the developer menu;
Then go to the menu and select User Agent - choose a flavour of IE.
Works about 50% of the time.
It won't work if the site is using Activex controls.

Integration of BI publisher with E-Business Suite

Gurus
Can you please tell me the steps to integrate Bi Publisher with E-business Suite
Regards
Nitin

http://www.oracle.com/technology/products/xml-publisher/docs/XMLEBSRep.pdf

Payment clearing on amount with mismatching business areas

Hi, gurus:
We recently activated AR module under 4.6c.
We use automatic clearing which calls FB1D, based on amount match between the cash receipt and the invoice.
The invoice comes with an business area, but the cash receipt record (RM doc type) has a blank business area.
The payment will clear, but SAP actually creates a new WO record to clear the invoice. The WO record contains the business area from the invoice.
The RM cash receipt record has no business area after the payment clearance. This creates a problem for us during reporting for the business area, and the new WO record also screws up the real WO amount in our Write-Off reports.
Is there a user exit in FB1D(SAPMF05A) that would allow us to add the business area to the RM record during payment clearance, and avoid the creation of the WO record ?
Thanks.

May be you can use Substitutions:
http://webmailmty.softtek.com/exchweb/bin/redir.asp?URL=http://help.sap.com/saphelp_erp2004/helpdata/en/5b/d231a843c611d182b30000e829fbfe/frameset.htm
Regards.

Issue with "firstRecord" Business Component method of JAVA Data bean API.

Hi,
Following is my use-case scenario:
I have to add or associate child MVG business component (CUT_Address)
with the parent business component (Account) using JAVA Data bean API.
My requirement is: first to check whether child business component(i.e. CUT_address) exists. If it exists then associate it with parent business component (Account)
otherwise create new CUT_address and associate it with account.
Code (using JAVA Data bean APIs) Goes as follows:
SiebelBusObject sBusObj = connBean.getBusObject("Account");
parentBusComp = sBusObj.getBusComp("Account");
SiebelBusComp parentBusComp;
SiebelBusComp childBusComp;
// retrieve required account.. Please assume Account1 exists
parentBusComp.activateField("Name");
parentBusComp.clearToQuery();
parentBusComp.setSearchSpec("Name", "Account1");
sBusComp.executeQuery2(true, true);
sBusComp.firstRecord();
Counter = 0;
while (counter < Number_Of_Child_Records_To_Insert)
childBusComp = parentBusComp.getMVGBusComp("City");
associatedChildBusComp = childBusComp.getAssocBusComp();
childBusComp.activateField("City");
childBusComp.clearToQuery();
childBusComp.setSearchSpec("City", Vector_of_city[counter]);
sBusComp.executeQuery2(true, true);
if( sBusComp.firstRecord() )
// Child already exist and do processing accordingly
else
// Child does not exist and do processing accordingly
childBusComp.release();
childBusComp = null;
associatedChildBusComp.release();
associatedChildBusComp=null;
Now the issue with this code is: For the first iteration, SbusComp.firstRecord returns 0 if records does not exist. However from the second iteration, SbusComp.firstRecord returns 1 even if there is no record matching the search specification.
Any input towards the issue is highly appreciable.
Thanks,
Rohit.

Setting the view mode to "AllView" helped.
Thanks for the lead!
In the end, I also had to invoke the business component method SetAdminMode with "true" as the argument so that I could also modify the records from my script.

Oracle 10G application server integrate with e-business suites 11i

Hello,
Server A:
i have one UAT server which is installed with e-business suites 11i. The users logon to discoverer from e-business suites using the username and password stored in e-business suites.
Server B:
then, i now hv to set up a 10G application server and 10G discoverer on a new server. The user request that they want to login to discoverer using the username and password as mentioned above. They reject to logon to database using 'connect directly', 'open connection' or 'private connection'.
what can i do in order to synchronize the username from Server A to Server B so that they can logon using the username and password they created in e-business suites.
thank you.

follow note 313418.1 it will let you use your oracle apps 11i with discoverer 10g, with the same user name and password, i did it before you may want to check my post after you check oracle note
http://oracle-magic.blogspot.com/2006/11/upgrading-discoverer-4i-to-10g-on-apps.html
fadi hasweh
http://oracle-magic.blogspot.com/
Oracle is not Magic, it just takes years of experience

OAM 11g is supporting direct integration with E Business ??

Hi All,
Is OAM 11g supporting Direct integration with E Business suite instead of going through the OSSO ??
Please give me some pointers how to do the OAM 11g and E Business suite integration.
Thanks & Regards,
Vaasu.

Duplicate thread (please post only once).
Integrating E-Business suite with OAM 11g
Re: Integrating E-Business suite with OAM 11g

Exchange 2010 - Setting up Users Calendar with Free /Busy Details share permssion, Outlook 2007 client cannot open

Setting up Users Calendar with Free /Busy Details share permssion, Outlook 2007 client cannot open the user shared folder but if we use OWA 2010 or Outlook 2010 client no issue opening the user shared calendar with Free/Busy Details setting.
The follwowig error is reported
You do not have sufficient permission to open the calendar folder. you don't have appropriate permission to perform this operation.
thanks,
Hussain

Setting up Users Calendar with Free /Busy Details share permssion, Outlook 2007 client cannot open the user shared folder but if we use OWA 2010 or Outlook 2010 client no issue opening the user shared calendar with Free/Busy Details setting.
The follwowig error is reported
You do not have sufficient permission to open the calendar folder. you don't have appropriate permission to perform this operation.
thanks,
Hussain
I built this little command from the "CalendarProcessing" commandlet... it cleared up my issues ...
Set-CalendarProcessing -Identity joeuser -AddNewRequestsTentatively $false -AddOrganizerToSubject $true -AllBookInPolicy $true -AllowConflicts $true -AllowRecurringMeetings $true -AutomateProcessing AutoUpdate -BookingWindowInDays 0 -ConflictPercentageAllowed
50 -DeleteAttachments $false -DeleteComments $false -DeleteNonCalendarItems $false -DeleteSubject $false -EnableResponseDetails $true -EnforceSchedulingHorizon $true -ForwardRequestsToDelegates $false -MaximumConflictInstances 100 -MaximumDurationInMinutes
0 -OrganizerInfo $true -ProcessExternalMeetingMessages $true -RemoveForwardedMeetingNotifications $true -RemoveOldMeetingMessages $true -RemovePrivateProperty $false -ScheduleOnlyDuringWorkHours $false -TentativePendingApproval $false -WhatIf
Look at those settings in technet article dd335046
good luck
JLH

Building Cascading Lists for Query Screens with ADF Business Components.

I build Cascading Lists for Query Screens with ADF Business Components. When I to select master list first working fine, but when I to select master list second returned error : JBO 25013 : Too many objects match the primary key oracle.jbo.key[CN]. CN dependences with key to detail list (Countries in this case). Please help me.
Andrew.

You would have a better chance, that someone answers your question, if you choose the right forum:
JDeveloper and ADF

Building Cascading Lists for Query with ADF Business components and JSP

I build Cascading Lists for Query Screens with ADF Business Components. When I to select master list first Ok, but when I to select master list second returned error : JBO 25013 : Too many objects match the primary key oracle.jbo.key[CN]. CN dependences with key to detail list (Countries in this case). Please help me.
Excuse me for my English.
Andrew.

You would have a better chance, that someone answers your question, if you choose the right forum:
JDeveloper and ADF

How can I purchase 5 licenses for FCP X with my business account?

Our Apple Store allows to purchase FCP X in blocks of 20+ but I only need 7. I've purchase one and downloaded it but I need to purchase 6 more. Can I do that with one business account or do I have to created Apple ID's for each computer?

You need to create an Apple ID for each computer.

Applying SOA with E-business

Similar Messages

Maybe you are looking for