Applying Software Installation Policy Is Taking Long Time During Boot Process
1 of my servers is having slow boot up issue. I have enabled user environment debugging and the gpsvc.log file has been generated. I have also used the Windows Performance Analyzer to capture logs and results came back that the GP Client is taking a long
time in the boot process. So, I reckoned the slow boot is due to GPO but I am not sure where to look from this log file.
I have only paste part of the gpsvc.log file here due to limitation in the number of characters allowed to be posted. Would appreciate some good advise on this issue that I am facing.
GPSVC(34c.408) 04:03:30:109 ReadExtStatus: Reading Previous Status for extension {FB2CA36D-0B40-4307-821B-A13B252DE56C}
GPSVC(34c.408) 04:03:30:109 ReadExtStatus: Reading Previous Status for extension {fbf687e6-f063-4d9f-9f4f-fd9a26acdd5f}
GPSVC(34c.408) 04:03:30:109 GetMachineToken: Looping for authentication again.
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: Logging Data for Target <SW01E772>.
GPSVC(34c.408) 04:03:30:109 GPLockPolicySection: Sid = (null), dwTimeout= 30000, dwFlags= 0
GPSVC(34c.408) 04:03:30:109 LockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:30:109 Sync Lock Called
GPSVC(34c.408) 04:03:30:109 Writer Lock got immediately.
GPSVC(34c.408) 04:03:30:109 Lock taken successfully
GPSVC(34c.408) 04:03:30:109 UnLockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:30:109 UnLockedsuccessfully
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: OpenThreadTokenfailed with error 1008, assuming thread is not impersonating
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: Processing extension Registry
GPSVC(34c.408) 04:03:30:125 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:30:125 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes and nosecurity group membership change and extension Registry has NoGPOChangesset.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Wireless Group Policy
GPSVC(34c.408) 04:03:30:125CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes but couldn't read extension Wireless Group Policy's status or policy time.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Extension Wireless Group Policy skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Group Policy Environment
GPSVC(34c.408) 04:03:30:125 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes but couldn't read extension Group Policy Environment's status or policy time.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Extension Group Policy Environment skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Group Policy Local Users and Groups
GPSVC(34c.408) 04:03:30:125 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:30:125 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:156 GPLockPolicySection: Sid = (null), dwTimeout= 30000, dwFlags= 0
GPSVC(34c.408) 04:03:30:156 LockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:30:156 Sync Lock Called
GPSVC(34c.408)04:03:30:156 Writer Lock got immediately.
GPSVC(34c.408) 04:03:30:156 Lock taken successfully
GPSVC(34c.408) 04:03:30:156 ProcessGPOList: Entering for extension Group Policy Local Users and Groups
GPSVC(34c.408) 04:03:30:156 MachinePolicyCallback: Settingstatus UI to Applying Group Policy Local Users and Groups policy...
GPSVC(34c.408) 04:03:30:156 ProcessGPOList: No changes. CSEwill not be passed in the IwbemServicesintfptr
GPSVC(34c.364)04:03:30:156 Message Status = <Applying Group Policy Local Users and Groups policy...>
GPSVC(34c.364) 04:03:30:156 Setting GPsessionstate = 1
GPSVC(34c.408) 04:03:31:796 ProcessGroupPolicyCompletedExInternal: Entering. Extension = {17D89FEC-5C44-4972-B12D-241CAEF74509}, dwStatus= 0x0
GPSVC(34c.408) 04:03:31:953 GetWbemServices: CoCreateInstancesucceeded
GPSVC(34c.408) 04:03:36:031 ConnectToNameSpace: ConnectServerreturned 0x0
GPSVC(34c.408) 04:03:36:140 ProcessGroupPolicyCompletedExInternal: Extension {17D89FEC-5C44-4972-B12D-241CAEF74509} was able to log data. Error = 0x0, dwRet= 0. Clearing the dirty bit
GPSVC(34c.408) 04:03:36:500 ProcessGroupPolicyCompletedExInternal: Finished processing extension <Group Policy Local Users and Groups> at 44203 ticks (ms)
GPSVC(34c.408) 04:03:36:500 ProcessGroupPolicyCompletedExInternal: Leaving. Extension = {17D89FEC-5C44-4972-B12D-241CAEF74509}, Return status dwRet= 0x0
GPSVC(34c.408) 04:03:36:500 ProcessGPOList: Extension Group Policy Local Users and Groups returned 0x0.
GPSVC(34c.408) 04:03:36:500 ProcessGPOList: Extension Group Policy Local Users and Groups status was not updated because there was no changes and no transition or rsopwasn't enabled
GPSVC(34c.408) 04:03:36:500 UnLockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:36:500 UnLockedsuccessfully
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Group Policy Device Settings
GPSVC(34c.408) 04:03:36:531 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Group Policy Device Settings'sstatus or policy time.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Group Policy Device Settings skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Folder Redirection
GPSVC(34c.408) 04:03:36:531 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Folder Redirection's status or policy time.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Folder Redirection skipped with flags 0x7.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Microsoft Disk Quota
GPSVC(34c.408) 04:03:36:531 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Microsoft Disk Quota's status or policy time.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Microsoft Disk Quota skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Group Policy Network Options
GPSVC(34c.408) 04:03:36:531CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension Group Policy Network Options'sstatus or policy time.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension Group Policy Network Options skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension QoSPacket Scheduler
GPSVC(34c.408) 04:03:36:546 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension QoSPacket Scheduler's status or policy time.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension QoSPacket Scheduler skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Scripts
GPSVC(34c.408) 04:03:36:546 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:546 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes and no security group membership change and extension Scripts has NoGPOChangesset.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Remote Desktop USB Redirection
GPSVC(34c.408) 04:03:36:546 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension Remote Desktop USB Redirection's status or policy time.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension Remote Desktop USB Redirection skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Internet Explorer Zonemapping
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Zonemapping'sstatus or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Internet Explorer Zonemappingskipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Drive Maps
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Drive Maps'sstatus or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Drive Maps skipped withflags 0x7.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processingextension Group Policy Folders
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Folders'sstatus or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Folders skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Network Shares
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Network Shares's status or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Network Shares skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Files
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't readextension Group Policy Files's status or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Files skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Data Sources
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs:No GPO changes but couldn't read extension Group Policy Data Sources's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Group Policy Data Sources skipped because bothdeleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Group Policy Ini Files
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't read extension Group Policy Ini Files's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension GroupPolicy Ini Files skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Internet Explorer User Accelerators
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't readextension Internet Explorer User Accelerators's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Internet Explorer User Accelerators skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Security
GPSVC(34c.408) 04:03:36:578ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes and no security group membership change and extension Security has NoGPOChanges set.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Deployed Printer Connections
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't read extension Deployed Printer Connections's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Deployed Printer Connections skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Services
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Services's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Services skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Internet Explorer Branding
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Branding's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Internet Explorer Branding skipped with flags 0x7.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group PolicyFolder Options
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Folder Options's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Folder Options skipped because bothdeleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Scheduled Tasks
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Scheduled Tasks's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Scheduled Tasks skipped because both deletedand changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Registry
GPSVC(34c.408) 04:03:36:593 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:625 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 0
GPSVC(34c.408)04:03:36:625 LockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:36:625 Sync Lock Called
GPSVC(34c.408) 04:03:36:625 Writer Lock got immediately.
GPSVC(34c.408) 04:03:36:625 Locktaken successfully
GPSVC(34c.408) 04:03:36:625 ProcessGPOList: Entering for extension Group Policy Registry
GPSVC(34c.408) 04:03:36:625 MachinePolicyCallback: Setting status UI to Applying Group Policy Registry policy...
GPSVC(34c.408) 04:03:36:625 ProcessGPOList: No changes. CSE will not be passed in the IwbemServices intf ptr
GPSVC(34c.364) 04:03:36:625 Setting GPsession state =1
GPSVC(34c.408) 04:03:36:765 ProcessGroupPolicyCompletedExInternal: Entering. Extension = {B087BE9D-ED37-454F-AF9C-04291E351182}, dwStatus = 0x0
GPSVC(34c.408) 04:03:36:796 GetWbemServices: CoCreateInstance succeeded
GPSVC(34c.408) 04:03:36:812 ConnectToNameSpace: ConnectServer returned 0x0
GPSVC(34c.408) 04:03:36:812 ProcessGroupPolicyCompletedExInternal: Extension {B087BE9D-ED37-454F-AF9C-04291E351182} was able to log data. Error = 0x0, dwRet = 0. Clearing the dirty bit
GPSVC(34c.408) 04:03:36:843 ProcessGroupPolicyCompletedExInternal: Finished processing extension <Group Policy Registry> at 44546 ticks (ms)
GPSVC(34c.408) 04:03:36:843 ProcessGroupPolicyCompletedExInternal: Leaving. Extension = {B087BE9D-ED37-454F-AF9C-04291E351182}, Return status dwRet = 0x0
GPSVC(34c.408) 04:03:36:843 ProcessGPOList: Extension Group Policy Registry returned 0x0.
GPSVC(34c.408) 04:03:36:843 ProcessGPOList: Extension Group Policy Registry status was not updated because there was no changes and no transition or rsop wasn'tenabled
GPSVC(34c.408) 04:03:36:843 UnLockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:36:843 UnLocked successfully
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension 802.3 Group Policy
GPSVC(34c.408) 04:03:36:875 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension 802.3 Group Policy's status or policy time.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension 802.3 Group Policy skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension Group Policy Printers
GPSVC(34c.408) 04:03:36:875 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension Group Policy Printers's status or policy time.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension Group Policy Printers skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension Group Policy Shortcuts
GPSVC(34c.408) 04:03:36:875 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension Group Policy Shortcuts's status or policy time.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension Group Policy Shortcuts skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:890 ProcessGPOs: Processing extension Software Installation
GPSVC(34c.408) 04:03:36:890 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:890 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:890 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 0
GPSVC(34c.408) 04:03:36:890 LockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:36:890 Sync Lock Called
GPSVC(34c.408) 04:03:36:890 Writer Lock got immediately.
GPSVC(34c.408) 04:03:36:890 Lock taken successfully
GPSVC(34c.408) 04:03:36:890 ProcessGPOList: Entering for extension Software Installation
GPSVC(34c.408) 04:03:36:890 MachinePolicyCallback: Setting status UI to Applying Software Installation policy...
GPSVC(34c.408) 04:03:36:890ProcessGPOList: No changes. CSE will not be passed in the IwbemServices intf ptr
GPSVC(34c.364) 04:03:36:890 Message Status = <Applying Software Installation policy...>
GPSVC(34c.364) 04:03:36:890 Setting GPsession state = 1
GPSVC(34c.408) 04:03:37:312 ProcessGPOList: Extension Software Installation returned 0x0.
GPSVC(34c.408) 04:03:37:312 ProcessGPOList: Extension Software Installation status was not updated because there was no changes and no transition or rsop wasn't enabled
GPSVC(34c.408) 04:03:37:312UnLockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:37:312 UnLocked successfully
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension TCPIP
GPSVC(34c.408) 04:03:37:328 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension TCPIP's status or policy time.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension TCPIP skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension Internet Explorer Machine Accelerators
GPSVC(34c.408) 04:03:37:328 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Machine Accelerators's status or policy time.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension Internet Explorer Machine Accelerators skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension IP Security
GPSVC(34c.408) 04:03:37:328 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension IP Security's status or policy time.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension IP Security skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension Group Policy Internet Settings
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Internet Settings's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Internet Settings skipped with flags 0x7.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Start Menu Settings
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Start Menu Settings's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Start Menu Settings skipped because both deleted and changed GPO listsare empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processingextension Group Policy Regional Options
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extensionGroup Policy Regional Options's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy RegionalOptions skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Power Options
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Power Options's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Power Options skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Audit Policy Configuration
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Audit Policy Configuration's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Audit Policy Configuration skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Applications
GPSVC(34c.408) 04:03:37:359 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension Group Policy Applications's status or policy time.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension Group Policy Applications skipped with flags 0x7.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Processing extension Enterprise QoS
GPSVC(34c.408) 04:03:37:359 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension Enterprise QoS's status or policy time.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension Enterprise QoS skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Processing extensionCP
GPSVC(34c.408) 04:03:37:359 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension CP's status or policy time.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension CP skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:359 gpGetFgPolicyRefreshInfo: Mode: 1, Reason: 7
GPSVC(34c.408) 04:03:37:359 SetFgRefreshInfo: Previous Machine Fg policy Synchronous, Reason: SKU.
GPSVC(34c.408) 04:03:37:359 SetFgRefreshInfo: Next Machine Fg policy Synchronous, Reason: SKU.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: No WMI logging done in this policy cycle.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Boot/Logon Policy processing - checking if UBPM trigger events need to be fired
GPSVC(34c.408) 04:03:37:375 CheckAndFireGPTriggerEvent: FiredPolicy present UBPM trigger event for Machine.
GPSVC(34c.408) 04:03:37:375 Application complete with bConnectivityFailure = 0.
GPSVC(34c.79c) 04:03:40:546 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xc8c
GPSVC(34c.79c) 04:03:40:546 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3a0) 04:03:40:546 Target = Machine
GPSVC(34c.79c) 04:03:40:546 Client_RegisterForNotification: User =machine, changenumber = 0
GPSVC(34c.79c) 04:03:40:546 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(3bc.ac8) 04:03:59:296 CGPNotify::RegisterForNotification: Entering withtarget Machine and event 0x1ac
GPSVC(3bc.ac8) 04:03:59:296 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.748) 04:03:59:296 Target = Machine
GPSVC(3bc.ac8) 04:03:59:296 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(3bc.ac8) 04:03:59:296 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.748) 04:03:59:343 Target = Machine
GPSVC(34c.748) 04:03:59:343 Target = Machine,ChangeNumber 0
GPSVC(34c.3ac) 04:03:59:515 Target = Machine
GPSVC(34c.3ac) 04:03:59:531 Target = Machine, ChangeNumber 0
GPSVC(34c.3ac) 04:03:59:531 Sid = (null), dwTimeout = 600000, dwFlags = 268435456
GPSVC(34c.3ac) 04:03:59:531 LockPolicySection calledfor user <Machine>
GPSVC(34c.3ac) 04:03:59:546 Async Lock called
GPSVC(34c.3ac) 04:03:59:546 Reader Lock got immediately. m_cReadersInLock : 1
GPSVC(34c.3ac) 04:03:59:546 Sid = (null)
GPSVC(34c.3ac) 04:03:59:546 UnLockPolicySection called for user <Machine>
GPSVC(34c.3ac) 04:03:59:546 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(34c.3ac) 04:03:59:546 Settinglock state as notLocked
GPSVC(34c.3ac) 04:03:59:546 UnLocked successfully
GPSVC(34c.bdc) 04:04:00:000 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xd04
GPSVC(34c.bdc) 04:04:00:000 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:04:00:000 Target =Machine
GPSVC(34c.bdc) 04:04:00:000 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.bdc) 04:04:00:000 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.3ac) 04:04:00:000 Target = Machine, ChangeNumber 0
GPSVC(34c.748) 04:04:01:140 Target = Machine
GPSVC(34c.748) 04:04:01:140 Target = Machine, ChangeNumber 0
GPSVC(154.41c) 04:05:25:509CGPNotify::RegisterForNotification: Entering with target Machine and event 0x458
GPSVC(154.41c) 04:05:25:509 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:05:25:509 Target = Machine
GPSVC(154.41c) 04:05:25:525 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:05:25:525 Target = Machine, ChangeNumber 0
GPSVC(154.41c) 04:05:25:525 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(154.41c) 04:05:25:759 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x4e8
GPSVC(154.41c) 04:05:25:759 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:05:25:759 Target = Machine
GPSVC(154.41c) 04:05:25:775 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(154.41c) 04:05:25:775 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.3ac) 04:05:25:775 Target = Machine, ChangeNumber 0
GPSVC(34c.3ac) 04:05:59:217 Target = Machine
GPSVC(34c.3ac)04:05:59:233 Target = Machine, ChangeNumber 0
GPSVC(3bc.3cc) 04:05:59:389 CGPNotify::UnregisterNotification: Entering with event 0x1ac
GPSVC(3bc.3cc) 04:05:59:389 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(3bc.3cc) 04:05:59:405 CGPNotify::UnregisterNotification: Canceling pending calls
GPSVC(3bc.3cc) 04:05:59:420 Client_CompleteNotificationCall: failed with 0x4c7
GPSVC(3bc.3cc) 04:05:59:420 CGPNotify::UnregisterNotification: Cancelled pending calls
GPSVC(3bc.3cc) 04:05:59:420 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
GPSVC(34c.360) 04:06:00:827 Target = Machine
GPSVC(34c.360) 04:06:00:827 Target = Machine, ChangeNumber 0
GPSVC(34c.360) 04:06:01:155 Target = Machine
GPSVC(34c.360) 04:06:01:171 Target = Machine, ChangeNumber 0
GPSVC(34c.fe8) 04:06:02:124 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x218
GPSVC(34c.fe8) 04:06:02:140 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.360) 04:06:02:155 Target = Machine
GPSVC(34c.fe8) 04:06:02:155 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.fe8) 04:06:02:171 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.da4) 05:06:16:856 Target = Machine
GPSVC(34c.da4) 05:06:16:856 Target = Machine, ChangeNumber 0
GPSVC(34c.da4) 05:06:16:856 Target = S-1-5-20
GPSVC(34c.da4) 05:06:16:856 Could not find user by sid, finding user by session id
GPSVC(34c.da4) 05:06:16:856 Caller requesting for user notification/lock is from session 0
GPSVC(34c.da4) 05:06:16:856 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.da4) 05:06:16:856 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:856 Target = S-1-5-20
GPSVC(34c.de8) 05:06:16:856 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:872 Callerrequesting for user notification/lock is from session 0
GPSVC(34c.de8) 05:06:16:872 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.de8) 05:06:16:872 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:872 Caller requesting for usernotification/lock is from session 0
GPSVC(34c.da4) 05:06:16:872Target = S-1-5-20
GPSVC(34c.da4) 05:06:16:872 Could not find user by sid, finding user by session id
GPSVC(34c.da4) 05:06:16:872 Caller requesting for user notification/lock is from session 0
GPSVC(34c.da4) 05:06:16:872 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.da4) 05:06:16:872 Could not find user by sid, finding user by session id
GPSVC(34c.da4) 05:06:16:872 Caller requesting for user notification/lock is from session 0
GPSVC(34c.de8) 05:06:16:887 Target = S-1-5-20
GPSVC(34c.de8) 05:06:16:887 Could notfind user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:887 Caller requesting for user notification/lock is from session 0
GPSVC(34c.de8) 05:06:16:887 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.de8) 05:06:16:887 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:887 Caller requesting for user notification/lock is from session 0
GPSVC(34c.da4) 05:06:26:981 Setting GPsession state = 1
GPSVC(34c.de8) 05:06:32:341 SID = S-1-5-21-206128196-3657029889-627342018-7757
GPSVC(34c.de8) 05:06:32:356 bMachine = 0
GPSVC(34c.de8) 05:06:32:356 Setting GPsession state = 1
GPSVC(34c.de8) 05:06:32:356 Message Status = <Applying user settings...>
GPSVC(34c.778) 05:06:32:356 StartTime For network wait: 32140ms
GPSVC(34c.778) 05:06:32:356 Current Time: 3819953ms
GPSVC(34c.de8) 05:06:32:356 Setting GPsession state = 1
GPSVC(34c.778) 05:06:32:356 MaxTimeToWaitForNetwork: 5212ms
GPSVC(34c.778) 05:06:32:356 TimeRemainingToWaitForNetwork: 0ms
GPSVC(34c.778) 05:06:32:356 UserPolicy: Waiting for machine policy wait for network event with timeout 0 ms
GPSVC(34c.778) 05:06:32:388 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 65538
GPSVC(34c.778) 05:06:32:388 LockPolicySection called for user <Machine>
Hi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support
Similar Messages
-
BPEL web service is taking long time during first invoke
Hello All,
I have a BPEL process where I am calling a webservice which returns invoices.
The issue is during first invoke of webservice it is taking 3 minutes to return the data. After that it returned the data for further invokes in 5 – 10 seconds on average time.
Could anyone please provide your help on this. This is running on PRODUCTION box and is very urgent.
Thanks Prashant
Edited by: 879543 on 16-Aug-2011 02:09Hello All,
I have a BPEL process where I am calling a webservice which returns invoices.
The issue is during first invoke of webservice it is taking 3 minutes to return the data. After that it returned the data for further invokes in 5 – 10 seconds on average time.
Could anyone please provide your help on this. This is running on PRODUCTION box and is very urgent.
Thanks Prashant
Edited by: 879543 on 16-Aug-2011 02:09 -
IMac taking long time to boot after new hard drive installed. Help?
I recently had a new hard drive installed on my iMac (running Snow Leopard). After the intall all was well, but I couldn't get my screensaver to work. Erroneously thinking it was missing, I reinstalled it and ended up with two screen saver folders in the system files. Now when I turn on the Mac, I get a white screen for several seconds (close to a minute) before the system shows me the Apple logo and then boots. I'm concerned about this. Did my copying the screen saver cause the problem? Should I reinstall my system software? I was planning to upgrade to Mountain Lion anyway. Will that fix the problem? Any suggestions appreciated.
Restart in Safe Boot Mode (hold the left Shift key as soon as you restart your computer and hold it until the Apple logo appears). Once it gets to the desktop you can restart normally. Safe Mode serves a number of purposes and one of them is to delete/trim temporary files that might be causing boot problems. There's no guarantee this will improve your startup time but it will do no harm and I have seen computers restart more quickly after a Safe Boot.
-
Macbook pro 15 mid 2012 with os x 10.8.4 taking long time to boot up
i am using macbook pro 15 mid 2012
2.6GHz intel core i7
8GB RAM
700GB hard disk
my macbook is taking much more time to start and get it ready its taking more than 1min 30sec
after system starded its hard to open any application(safari) for starting time some times while using safari the cursor is in not responding i mean doing some process its showing colour wheel rotating
please tell me how to speed up my macbook proHow much free disk space is available ??
Click the Apple menu icon top left in your screen. From the drop down menu click About this Mac > More Info > System Report then select Storage on the left under Hardware.
You'll see Available and Capacity. Make sure there's at least 15% free disk space.
If there's sufficient free disk space, check for login items. Open System Preferences > Users & Groups > Login Items
Delete any items there then restart your Mac to test.
some times while using safari the cursor is in not responding i mean doing some process its showing colour wheel rotating
Try troubleshooting plugins and extensions...
From your Safari menu bar click Safari > Preferences then select the Security tab.
Deselect: Allow all other plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
If it's not a plug-in issue, select the Extensions tab. If there are any extensions installed, turn that OFF, quit and relaunch Safari to test. If that made a difference, uninstall one at a time, quit and relaunch Safari to test. -
Hello,
We have Installed Solman 7.1 SP4 and now trying to upgrade to SP10.
kernel release 721
kernel make variant 721_EXT_REL
OS windows 2008 R2
DB: Oracle 11.2.0.3
This seems to be stuck in Preprocessing Phase.
SAPup LOg
CURRENTPHASE MAIN_SHDRUN/CMDFILE_UPG
...started at 20140507212957
...begin processing at 20140507212959
..finished at 20140507213914 with status SUCCEEDED.
CURRENTPHASE MAIN_SHDRUN/DDIC_UPG
...started at 20140507213914
...begin processing at 20140507213916
SAPup.ECO
### Phase MAIN_SHDRUN/DDIC_UPG:
SAPup> Starting subprocess in phase 'DDIC_UPG' at 20140507213929
ENV: DBMS_TYPE=ora
ENV: JAVA_HOME=H:\usr\sap\SOL\DVEBMGS00\exe\sapjvm_4
ENV: NLS_LANG=AMERICAN_AMERICA.UTF8
ENV: ORACLE_HOME=G:\oracle\SOL\11203
ENV: ORACLE_SID=SOL
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=H:\usr\sap\SOL\SUM\abap\exe;G:\oracle\SOL\11203\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;H:\usr\sap\SOL\SYS\exe\uc\NTAMD64
ENV: SAPDATA_HOME=G:\oracle\SOL
ENV: SAPSYSTEMNAME=SOL
ENV: auth_shadow_upgrade=1
ENV: dbs_ora_schema=SAPSR3
ENV: dbs_ora_tnsname=SOL
ENV: rsdb_ssfs_connect=0
EXECUTING H:\usr\sap\SOL\SUM\abap\exe\tp.EXE
"pf=H:\usr\sap\SOL\SUM\abap\var\DDICUPG.TPP" put SOL
"-Dmainimp_proc=1" "-Dparallel=3"
This is H:\usr\sap\SOL\SUM\abap\exe\tp.EXE version 380.13.51 (release
721, unicode enabled)
Looking for effective putsteps ... ... ready (looking for putsteps)
ULOG
### Phase MAIN_SHDRUN/DDIC_UPG:
soladm 20140507213919 : H:\usr\sap\SOL\SUM\abap\exe\tp.EXE
pf=H:\usr\sap\SOL\SUM\abap\var\SHADOW.TPP setstopmark buffer=SOL
before SAPK-70107INWEBCUIF (pid=9528)
soladm 20140507213929 : H:\usr\sap\SOL\SUM\abap\exe\tp.EXE
pf=H:\usr\sap\SOL\SUM\abap\var\DDICUPG.TPP put SOL -Dmainimp_proc=1
-Dparallel=3 (pid=14756)
Parameter Values
abap/heap_area_nondia 300000000
rsdb/obj/max_objects 20000
rsdb/obj/buffersize 50000
sap/bufdir_entries 10000
zcsa/presentation_buffer_area 20000000
zcsa/db_max_buftab 10000
zcsa/table_buffer_area 100000000
rsdb/cua/buffersize 10000
rtbb/buffer_length 60000
rsdb/ntab/irbdsize 15000
abap/shared_objects_size_MB 350
abap/buffersize 500000
rdisp/max_wprun_time 3600
ztta/roll_area 30000000
Please help.
RaghuI can see SAPupStat log as
2014/05/07 21:17:05: 39.08% LEFT: 258:43:48 END: 2014/05/18 16:00:53
2014/05/07 21:27:35: 39.14% LEFT: 258:23:47 END: 2014/05/18 15:51:22
2014/05/07 21:28:31: 39.64% LEFT: 253:02:17 END: 2014/05/18 10:30:48
2014/05/07 21:29:57: 39.81% LEFT: 251:18:37 END: 2014/05/18 08:48:34
2014/05/07 21:39:14: 39.87% LEFT: 250:57:32 END: 2014/05/18 08:36:46
Does it mean it will end on 2014/05/18 ? -
Installation of ECC6 on AIX/ DB2 taking long time
Hi,
I am installing SAP ECC 6 on a heavy power server with AIX 5.3 with DB2 9 and amd all the other setting is perfect with correct JDK version. The first 24 step on installation went fine in 20 min and its been more than 16 hrs where installation is on ABAP import step. The installation is running fine with out any error but its takeing long time
does it take long time on AIX with DB2?
Cheers
ArunHi,
The space fine here. installation directory is 94% free. and Log also same. Let me know wht is the minimum to maximum time for the installation
Cheers
Arun -
Hi in my sql query i applied like condition (like '%TEST') but it is taking long time
Hi in my sql query i applied like condition (like '%TEST') but it is taking long time. I applied indexes also,but still i'm facing the same problem. In my databse nearly 2,00,000 records their.
Hi Manikandan
Is there a difference in performance between running the query in BEx and WebI?
have you aggregates in place on the BEx side of things?
When you say its taking too long to open the report, have you a variable screen coming up for the report and is that what is taking the time or is it the report execution.
With regards
Gill -
Retry recovery action is taking long time to complete
Hi,
I am in the process of testing error handling for my BPEL process.
As part of it, I have given the default recover action in the fault policy of the process as retry with a retry count of 3 times with retry interval as 2.
To test this, i have changed the target end point uri of the target service to some invalid url and ran the process.
First I was not able to find the BPEL process instance at all in the console.
Later I was able to find the instance after half an hour. When I saw the instance, if retry had happened or not.
I found that the retry happened for 3 times, but it took 30 mins for the first retry to complete and start the second retry.
Can anyone please let me know why the retry is taking long time although the retry interval I gave is only 2 seconds.
THanks in advance!!!!Hi,
Please find below the fault policy file:
<?xml version="1.0" encoding="UTF-8"?>
<faultPolicy version="2.0.1" id="TestFaultPolicy" xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="http://schemas.oracle.com/bpel/faultpolicy" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Conditions>
<faultName>
<condition>
<action ref="aia-ora-retry"/>
</condition>
</faultName>
</Conditions>
<Actions>
<Action id="aia-ora-retry">
<retry>
<retryCount>3</retryCount>
<retryInterval>2</retryInterval>
<exponentialBackoff/>
<retryFailureAction ref="aia-ora-java"/>
<retrySuccessAction ref="aia-ora-java"/>
</retry>
</Action>
<!-- This is an action will cause a replay scope fault-->
<Action id="ora-replay-scope">
<replayScope/>
</Action>
<!-- This is an action will bubble up the fault-->
<Action id="ora-rethrow-fault">
<rethrowFault/>
</Action>
<!-- This is an action will mark the work item to be "pending recovery from console"-->
<Action id="ora-human-intervention">
<humanIntervention/>
</Action>
<!-- This action will cause the instance to terminate-->
<Action id="ora-terminate">
<abort/>
</Action>
<Action id="aia-ora-java">
<javaAction className="oracle.apps.aia.core.eh.BPELJavaAction" defaultAction="ora-rethrow-fault">
<returnValue value="REPLAY" ref="ora-terminate"/>
<returnValue value="RETRHOW" ref="ora-rethrow-fault"/>
<returnValue value="ABORT" ref="ora-terminate"/>
<returnValue value="RETRY" ref="aia-ora-retry"/>
<returnValue value="MANUAL" ref="ora-human-intervention"/>
</javaAction>
</Action>
</Actions>
</faultPolicy> -
Finder (Snow Leopard 10.6.8) taking long time to load contents of any directory. Please help?
In my macbook pro 5,2 snow leopard (10.6.8), Finder taking long time to load contents of any directory. Please help?
I have already tried to spotlight re-indexing but it did not help. I am hardly able to work on it, almost for each directory I browse its keeps on spinning for 1min.Download iTunes from Apple's web site and install it. Don't use Software Update.
-
Sapinst taking long time to load
Hello experts,
we are installing sapnw730 PI.
we have noticed that the SAPinst taking long time to load ( near about 45 mins) for every time.
Once sapinst starts we dont find any slowness during the installation and the system behaves quite normal.
On the same host we installed sapnw7.1 BI, that took very less time to load.
Any clues to reduce the SAPinst load time ? , anyone encounter this error before?
system details : SUN Solaris SPARC with 8GB RAM and no other instances running on the host.
thanks in advanceWe have enough memory (8 GB Ram)
we have monitored other process and CPU usage during SAPinst run time.
our CPU utilization was 50 % only during SAPinst
Any other clues ??
Thanks -
Computer still taking a long time to boot
I have a late 2013 21.5” iMac (Model: ME087LL/A) with a 1TB hard drive (5400 rpm). I just switch from Windows to Mac, so I tried to keep everything as simple as possible on the transfer of files. I had only added Kaspersky Antivirus and Western Digital Tools.
Boot times and operation seemed normal so I transferred my music, pictures, and some files. My computer started running slow with just one user and started taking a long time to boot. I found that since I added about 24,000 pictures to iPhoto, the Mac was trying to send all these pictures to iCloud in the background. I stopped using iCloud for iPhoto and that seemed to speed up the normal operation once the computer is booted.
The computer still seemed to take a very long time to boot. It would now take 3 minutes to get from turning it on to being able to use Safari. I uninstalled Kaspersky Antivirus and Western Digital Tools using each company’s uninstallers so I know they are completely off the computer.
Any ideas on how to get back to the fast boot time? I am only using about 150 GBs of the 1 T drive so I don’t think that is causing the issue. What should I expect for a boot time on a brand new Late 2013 iMac? Or should I try to re-install Maverick and try to get a fresh start?
Any advice would be appreciated so I don’t feel like I made the wrong choice going to Mac. I'm kicking myself because the computer was so fast when I just got it.Seventy one thanks for trying to help me out. I really appreciate it. Log is below. You are absolutely right. Kaspersky and WD look like they still have something (as well as google??). Is there anything else that stands out? How would I go about getting rid of them? Re-Install? Clean Re-Install?
EtreCheck version: 1.9.12 (48)
Report generated June 16, 2014 at 6:19:51 PM EDT
Hardware Information:
iMac (21.5-inch, Late 2013) (Verified)
iMac - model: iMac14,3
1 2.9 GHz Intel Core i5 CPU: 4 cores
8 GB RAM
Video Information:
NVIDIA GeForce GT 750M - VRAM: 1024 MB
iMac 1920 x 1080
System Software:
OS X 10.9.3 (13D65) - Uptime: 0 days 0:8:41
Disk Information:
APPLE HDD HTS541010A9E662 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (847.45 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[loaded] com.kaspersky.kext.klif (3.0.3a40) Support
[loaded] com.kaspersky.nke (1.6.3a13) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.westerndigital.ErasePrivilegedHelper.plist Support
User Launch Agents:
[loaded] com.google.keystone.agent.plist Support
User Login Items:
None
Internet Plug-ins:
SharePointBrowserPlugin: Version: 14.4.2 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.125 - SDK 10.6 Support
Flash Player: Version: 14.0.0.125 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 930.71 GB Disk used: 141.47 GB
Destinations:
Mac Backup [Local] (Last used)
Total size: 2
Total number of backups: 5
Oldest backup: 2014-06-08 00:03:53 +0000
Last backup: 2014-06-16 03:07:06 +0000
Size of backup disk: Adequate
Backup size 2 > (Disk used 141.47 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
2% WindowServer
1% fontd
0% hidd
0% dpd
Top Processes by Memory:
98 MB Finder
74 MB WindowServer
66 MB ocspd
66 MB mds_stores
66 MB Dock
Virtual Memory Information:
5.37 GB Free RAM
1.69 GB Active RAM
233 MB Inactive RAM
731 MB Wired RAM
233 MB Page-ins
0 B Page-outs -
Query taking long time for EXTRACTING the data more than 24 hours
Hi ,
Query taking long time for EXTRACTING the data more than 24 hours please find the query and explain plan details below even indexes avilable on table's goe's to FULL TABLE SCAN. please suggest me.......
SQL> explain plan for select a.account_id,round(a.account_balance,2) account_balance,
2 nvl(ah.invoice_id,ah.adjustment_id) transaction_id,
to_char(ah.effective_start_date,'DD-MON-YYYY') transaction_date,
to_char(nvl(i.payment_due_date,
to_date('30-12-9999','dd-mm-yyyy')),'DD-MON-YYYY')
due_date, ah.current_balance-ah.previous_balance amount,
decode(ah.invoice_id,null,'A','I') transaction_type
3 4 5 6 7 8 from account a,account_history ah,invoice i_+
where a.account_id=ah.account_id
and a.account_type_id=1000002
and round(a.account_balance,2) > 0
and (ah.invoice_id is not null or ah.adjustment_id is not null)
and ah.CURRENT_BALANCE > ah.previous_balance
and ah.invoice_id=i.invoice_id(+)
AND a.account_balance > 0
order by a.account_id,ah.effective_start_date desc; 9 10 11 12 13 14 15 16
Explained.
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)|
| 0 | SELECT STATEMENT | | 544K| 30M| | 693K (20)|
| 1 | SORT ORDER BY | | 544K| 30M| 75M| 693K (20)|
|* 2 | HASH JOIN | | 544K| 30M| | 689K (20)|
|* 3 | TABLE ACCESS FULL | ACCOUNT | 20080 | 294K| | 6220 (18)|
|* 4 | HASH JOIN OUTER | | 131M| 5532M| 5155M| 678K (20)|
|* 5 | TABLE ACCESS FULL| ACCOUNT_HISTORY | 131M| 3646M| | 197K (25)|
| 6 | TABLE ACCESS FULL| INVOICE | 262M| 3758M| | 306K (18)|
Predicate Information (identified by operation id):
2 - access("A"."ACCOUNT_ID"="AH"."ACCOUNT_ID")
3 - filter("A"."ACCOUNT_TYPE_ID"=1000002 AND "A"."ACCOUNT_BALANCE">0 AND
ROUND("A"."ACCOUNT_BALANCE",2)>0)
4 - access("AH"."INVOICE_ID"="I"."INVOICE_ID"(+))
5 - filter("AH"."CURRENT_BALANCE">"AH"."PREVIOUS_BALANCE" AND ("AH"."INVOICE_ID"
IS NOT NULL OR "AH"."ADJUSTMENT_ID" IS NOT NULL))
22 rows selected.
Index Details:+_
SQL> select INDEX_OWNER,INDEX_NAME,COLUMN_NAME,TABLE_NAME from dba_ind_columns where
2 table_name in ('INVOICE','ACCOUNT','ACCOUNT_HISTORY') order by 4;
INDEX_OWNER INDEX_NAME COLUMN_NAME TABLE_NAME
OPS$SVM_SRV4 P_ACCOUNT ACCOUNT_ID ACCOUNT
OPS$SVM_SRV4 U_ACCOUNT_NAME ACCOUNT_NAME ACCOUNT
OPS$SVM_SRV4 U_ACCOUNT CUSTOMER_NODE_ID ACCOUNT
OPS$SVM_SRV4 U_ACCOUNT ACCOUNT_TYPE_ID ACCOUNT
OPS$SVM_SRV4 I_ACCOUNT_ACCOUNT_TYPE ACCOUNT_TYPE_ID ACCOUNT
OPS$SVM_SRV4 I_ACCOUNT_INVOICE INVOICE_ID ACCOUNT
OPS$SVM_SRV4 I_ACCOUNT_PREVIOUS_INVOICE PREVIOUS_INVOICE_ID ACCOUNT
OPS$SVM_SRV4 U_ACCOUNT_NAME_ID ACCOUNT_NAME ACCOUNT
OPS$SVM_SRV4 U_ACCOUNT_NAME_ID ACCOUNT_ID ACCOUNT
OPS$SVM_SRV4 I_LAST_MODIFIED_ACCOUNT LAST_MODIFIED ACCOUNT
OPS$SVM_SRV4 I_ACCOUNT_INVOICE_ACCOUNT INVOICE_ACCOUNT_ID ACCOUNT
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_ACCOUNT ACCOUNT_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_ACCOUNT SEQNR ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_INVOICE INVOICE_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_ADINV INVOICE_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_CIA CURRENT_BALANCE ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_CIA INVOICE_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_CIA ADJUSTMENT_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_CIA ACCOUNT_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_LMOD LAST_MODIFIED ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_ADINV ADJUSTMENT_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_PAYMENT PAYMENT_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_ADJUSTMENT ADJUSTMENT_ID ACCOUNT_HISTORY
OPS$SVM_SRV4 I_ACCOUNT_HISTORY_APPLIED_DT APPLIED_DATE ACCOUNT_HISTORY
OPS$SVM_SRV4 P_INVOICE INVOICE_ID INVOICE
OPS$SVM_SRV4 U_INVOICE CUSTOMER_INVOICE_STR INVOICE
OPS$SVM_SRV4 I_LAST_MODIFIED_INVOICE LAST_MODIFIED INVOICE
OPS$SVM_SRV4 U_INVOICE_ACCOUNT ACCOUNT_ID INVOICE
OPS$SVM_SRV4 U_INVOICE_ACCOUNT BILL_RUN_ID INVOICE
OPS$SVM_SRV4 I_INVOICE_BILL_RUN BILL_RUN_ID INVOICE
OPS$SVM_SRV4 I_INVOICE_INVOICE_TYPE INVOICE_TYPE_ID INVOICE
OPS$SVM_SRV4 I_INVOICE_CUSTOMER_NODE CUSTOMER_NODE_ID INVOICE
32 rows selected.
Regards,
Bathula
Oracle-DBAI have some suggestions. But first, you realize that you have some redundant indexes, right? You have an index on account(account_name) and also account(account_name, account_id), and also account_history(invoice_id) and account_history(invoice_id, adjustment_id). No matter, I will suggest some new composite indexes.
Also, you do not need two lines for these conditions:
and round(a.account_balance, 2) > 0
AND a.account_balance > 0
You can just use: and a.account_balance >= 0.005
So the formatted query isselect a.account_id,
round(a.account_balance, 2) account_balance,
nvl(ah.invoice_id, ah.adjustment_id) transaction_id,
to_char(ah.effective_start_date, 'DD-MON-YYYY') transaction_date,
to_char(nvl(i.payment_due_date, to_date('30-12-9999', 'dd-mm-yyyy')),
'DD-MON-YYYY') due_date,
ah.current_balance - ah.previous_balance amount,
decode(ah.invoice_id, null, 'A', 'I') transaction_type
from account a, account_history ah, invoice i
where a.account_id = ah.account_id
and a.account_type_id = 1000002
and (ah.invoice_id is not null or ah.adjustment_id is not null)
and ah.CURRENT_BALANCE > ah.previous_balance
and ah.invoice_id = i.invoice_id(+)
AND a.account_balance >= .005
order by a.account_id, ah.effective_start_date desc;You will probably want to select:
1. From ACCOUNT first (your smaller table), for which you supply a literal on account_type_id. That should limit the accounts retrieved from ACCOUNT_HISTORY
2. From ACCOUNT_HISTORY. We want to limit the records as much as possible on this table because of the outer join.
3. INVOICE we want to access last because it seems to be least restricted, it is the biggest, and it has the outer join condition so it will manufacture rows to match as many rows as come back from account_history.
Try the query above after creating the following composite indexes. The order of the columns is important:create index account_composite_i on account(account_type_id, account_balance, account_id);
create index acct_history_comp_i on account_history(account_id, invoice_id, adjustment_id, current_balance, previous_balance, effective_start_date);
create index invoice_composite_i on invoice(invoice_id, payment_due_date);All the columns used in the where clause will be indexed, in a logical order suited to the needs of the query. Plus each selected column is indexed as well so that we should not need to touch the tables at all to satisfy the query.
Try the query after creating these indexes.
A final suggestion is to try larger sort and hash area sizes and a manual workarea policy.alter session set workarea_size_policy = manual;
alter session set sort_area_size = 2147483647;
alter session set hash_area_size = 2147483647; -
I am extracting the data from ECC To bw .but Data Loading taking long tim
Hi All,
i am extracting the data from ECC To BI Syatem..but Data Loading Taking Long time. from last 6 hoursinfopackage is running.still it is showing yellow.Manually i made the red.and delete again i applied repeat of the last delta.but same proble is coming .in the status job is showing bckground job is not finished at source system.we requested to basis.basis people killed that job.again we schedule the chain also again same problem is coming.how can i solve this issue.
Thanks ,
chanduHi,
There are different places to track your job. Once your job is triggered in BW, you can track your load job where exactly it is taking more time and why. Follow below steps:
1) After InfoPackage is triggered, then take the request number and go to source system to check your extraction job status.
You can get the job status by taking the request number from BW and go to transaction SM37 in ECC. Then give the request number with begining '' and ending ''. Also give '*' to user name.
Job name: REQ_XXXXXX
User Name: *
Check the job status whether job is completed or cancelled or short dump. If the job is still running check in SM66 whether you can see any process. If not accordingly you got to check in ST22 or SM21 in ECC. If the job is complete, then the same in BW side now.
2) Check the data arrived in PSA, if not check whether Transfer routines or start routines are having bad SQL or code. Similarly in update rules.
3) Once it is through in Source system (ECC), Transfer rules , Update Rules, then the next task is updating the data might some time take more time which might be based on some parameters ( Number of parallel process to update database ). Check whether updating the database is taking more time and may be you got to check with the DBA guy also.
At all the times you should see minimum of atleast once process running all the time in SM66 till the time your job gets complete. If not you will see a log in ST22.
Let me know if you still have questions.
Assigning points is the only way of saying thanks in SDN.
Thanks,
Kumar. -
MacBook Air 13" is taking a very long time to boot up
My daughter purchased a MacBook Air 13" last 1.7 GH Intel Core i5, 4GB Memory. A couple of weeks ago, my daughter noticed that her computer was taking a long time to boot up. Apparently the bootup time has progressively lengthened to 3 - 5 minutes to get to her desktop. What happens is the boot-up process seems to stall on a grey screen and beach-balls until the desktop eventually appears. Does anyone have any idea of what could be causing this issue? Any tips, tricks, suggestion would be helpful.
Thanks!!I would consider doing the following:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
SSRS Reports taking long time to load
Hello,
Problem : SSRS Reports taking long time to load
My System environment : Visual Studio 2008 SP1 and SQL Server 2008 R2
Production Environment : Visual Studio 2008 SP1 and SQL Server 2008 R2
I have created a Parameterized report (6 parameters), it will fetch data from 1 table. table has 1 year and 6 months data, I am selecting parameters for only 1 month (about 2500 records). It is taking almost 2 minutes and 30 seconds
to load the report.
This report running efficiently in my system (report load takes only 5 to 6 seconds) but in
production it is taking 2 minutes 30 seconds.
I have checked the Execution log from production so I found the timing for
Data retrieval (approx~) Processing (approx~) Rendering (approx~)
10 second 15 sec
2 mins and 5 sec.
But Confusing point is that , if I run the same report at different time overall output time is same (approx) 2 min 30 sec but
Data retrieval (approx~) Processing (approx~) Rendering (approx~)
more than 1 min 15 sec
more than 1 min
so 1 question why timings are different ?
My doubts are
1) If query(procedure to retrieve the data) is the problem then it should take more time always,
2) If Report structure is problem then rendering will also take same time (long time)
for this (2nd point) I checked on blog that Rendering depends on environment structure e.g. Network bandwidth, RAM, CPU Usage , Number of users accessing same report at a time.
So I did testing of report when no other user working on any report But failed (same result output is 2 min 30 sec)
From network team I got the result is that there is no issue or overload in CPU usage or RAM also No issue in Network bandwidth.
Production Database Server and Report server are different (but in same network).
I checked that database server the SQL Server is using almost Full RAM (23 GB out of 24 GB)
I tried to allocate the memory to less amount up to 2GB (Trial solution I got from Blogs) but this on also failed.
one hint I got from colleague that , change the allocated memory setting from static memory to dynamic to SQL Server
(I guess above point is the same) I could not find that option Static and Dynamic memory setting.
I did below steps
Connected to SQL Server Instance
Right click on Instance go to properties, Go to Memory Tab
I found three options 1) Server Memory 2) Other memory 3) Section for "Configured values and Running values"
Then I tried to reduce Maximum Server memory up to 2 GB (As mentioned above)
All trials failed, this issue I could not find the roots for this issue.
Can anyone please help (it's bit urgent).Hi UdayKGR,
According to your description, your report takes too long to load on your production environment. Right?
In this scenario, since the report runs quickly in developing environment, we initially think it supposed to be the issue on data retrieval. However, based on the information in execution log, it takes longest time on rendering part. So we suggest you optimize
the report itself to reduce the time for rendering. Please refer to the link below:
My report takes too long to render
Here is another article about overall performance optimization for Reporting Services:
Reporting Services Performance and Optimization
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
Maybe you are looking for
-
Have MacBook Pro, Airport Extreme router, Mtn Lion 10.8.1 and want to print wirelessly with HP 3054 610a which was installed 2 days ago via USB. Prefer to set up the printer on the wifi network, but how do I enter ssid and passphrase. On the printer
-
Multiple conversations with one person
I want to save a Messages conversation with someone, and start a new conversation with the same person. When I select the person from my Contacts to start the new conversation, I am returned to the old conversation. How can I start a completely new c
-
Problem while releasing Request
Hello All, In one of our client's DEV Server, we are facing problem while releasing requests. When I release a request it is not appearing in the PRD import Queue. When I checked the TMS Alert Viewer, it is showing as" TP REPORTED ERROR" And more ove
-
How do I programatically dissable a user account?
I'm writing an application that needs to be 21 CFR Part 11 compliant, and this would be an effective loss management procedure for lost/stolen usernames and passwords. I'm using the DSC 8.2.1 module and can see no way to do this other than through t
-
Having problems in ipad3 render. Certain articles render faded. Almost as if there's a transparent white screen. on top of my article. Any solutions???