Applying TAX arte aganist total Invoice amount

Hello ALL,
We are trying to implement Oracle AR module for Taiwan. The lowest dollar amount use can poay in Taiwan is 1 taiwan dollar, there is no cents. But I oracle applications Ar is set up with 2 decimals and AR apply tax aganist each line, not aganist total amount
As per taiwan govt rules, VAT tax should be applied aganist total invoice and then should be rounded off to nearest dollar.
Current apps doesn't allow to apply tax aganist total. We can't set rounding to 0 , then tax at each line will be rounded off to nearest dollar, there by causing tax to increase or decrease more than a dollar
Seems to be the only way to fix this is maually adjusting the tax amount at each line. Is there anything else you guys can think of ??
any suggestions will be really appreciated
Regards
KK

Hello Gurus,
Please let me know how the Solutions provided here, can delete automatically....
Is there any problem with those cheater's.....???????????????????????
Edited by: Vijay Babu Dudla on Jul 20, 2009 7:55 AM

Similar Messages

  • Applying TAX aganist total Invoice amount

    Hello ALL,
    We are trying to implement Oracle AR module for Taiwan. The lowest dollar amount use can poay in Taiwan is 1 taiwan dollar, there is no cents. But I oracle applications Ar is set up with 2 decimals and AR apply tax aganist each line, not aganist total amount
    As per taiwan govt rules, VAT tax should be applied aganist total invoice and then should be rounded off to nearest dollar.
    Current apps doesn't allow to apply tax aganist total. We can't set rounding to 0 , then tax at each line will be rounded off to nearest dollar, there by causing tax to increase or decrease more than a dollar
    Seems to be the only way to fix this is maually adjusting the tax amount at each line. Is there anything else you guys can think of ??
    any suggestions will be really appreciated
    Regards
    KK

    Hello,
    Withholding tax amounts are usually readily available in the database tables. Search for the tax amounts in the same table where you are getting the invoice amounts.
    IF it is in percentage, you might have to do a simple math.
    cheers,
    Sushil Joshi

  • My name is Sabahattin Bodur. I purchased Macbook Air (MBAIR 13.3/2.0/8/512Flash). The price is $ 2,199.00 (total invoice amount is $ 2,338.64). When I check on your website, the price of this merchandise looks as $ 1,199. I feel that I have paid more than

    My name is Sabahattin Bodur. I purchased Macbook Air (MBAIR 13.3/2.0/8/512Flash). The price is $ 2,199.00 (total invoice amount is $ 2,338.64). When I check on your website, the price of this merchandise looks as $ 1,199. I feel that I have paid more than it costs.
    Please kindly clarify the situation and inform me.
    Invoice date      : June 27, 2012  12:25 PM
    Invoice number : *************
    Part number       : MD846LL/A
    Serial number     : C0******F57J
    Kind Regards,
    Sabahattin Bodur
    <Edited by Host>

    Thank you for reply Ralph. When I check the system summary on my Mac, I find the following info. It looks like system has not been upgraded. I appreciate if you share your opinion with me.
    Regards,
    Model Name:          MacBook Air
      Model Identifier:          MacBookAir5,2
      Processor Name:          Intel Core i7
      Processor Speed:          2 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache (per Core):          256 KB
      L3 Cache:          4 MB
      Memory:          8 GB
      Boot ROM Version:          MBA51.00EF.B00
      SMC Version (system):          2.5f7
      Serial Number (system):          C0******57J
      Hardware UUID:        ****
    <Edited By Host>

  • Variance for total invoice amount

    Hi Experts,
    Please advise which variance i can use for total invoice amount. We have price and quantity varaince at item level. But at header level for total invoice amount there is no variance. User is able to enter any amount and it is going to "Inventory Small Diff" account. Please advise.
    Regards,
    Kamal

    Hi,
    You can set tolerance limits with t-code OMR6, if the amount is greater than the limit, system will block the invoice verification, doesn't post!
    Hope can help you!
    Good day
    Tao

  • Rate - How to get the total invoice amount?

    Hi Experts,
    I need assign the 'total invoice amount' to an operand then do some discount calculation. The question is how I could get it. I tried COMPUT99, but it doesn't get anything.
    Thank you,

    Hi - Why don't you use DISC*  ( discount ) variant programs instead of comput99 , you can create a custom variant and fetch the invoice value from ERDK .
    Regards,
    Shekhar

  • Applying down payments bigger than invoice amount

    Hi there!!
    I want to control employee advances via the following procedure:
    Create a Control account in Asset named Employee Advance account
    Create BP group employee and create employee master in Business Partner master data as vendor, link the control account
    Create a downpayment (advance) for the employee
    Booking the invoices using the AP services
    Applying the paymnet using the down payment (but when the advance is bigger than the invoice to pay, that it´s my case, ths system ask me to pay an amount) how could I avoid this?
    How could I applied a bigger advance to an invoice, without book a payment?
    best regards
    PS Internal reconciliation doesn´t works because amounts doesn´t match

    Thanks Gordon/Jitin
    So, I created a payment on account with the difference amount between the downpayment request and the invoice.
    But when i use this last payment to pay another invoice with smaller amount, the difference went to the account configured in "Realized Exchange Diff" (G/L Account Determination).
    So, i understand that payment on account can only be fully reconciled and can not create another payment on account, like the first case. ¿This is correct?
    Rewards.
    Diana Ortega

  • To caliculate invoice amount with Tax amount

    HI,
    We r here creating purchase register report.
    user requirement is in purchase register user wants invoice values as invoice value + taxes.
    we have takne invoice amount form RSEG Table & taxes form BSET table.
    How can we link RSET to BSET table.we have three lint items from RSEG table but if we select from BSET table all the three line taxes caliculating in to one line items it must caliculate line item wise.
    how can we take line item wise taxes to invoice amout.
    Pls help.
    Regards
    Sunil

    Hi,
    Please also refer the condition number in the report. Since every condition type will have a unique number, line item wise breakup is possible.
    Thanks

  • Vendor Invoice amount allowing any higher value

    Hi
    1. While I do a vendor invoice for a PO, the document balance field (DIFFERENZ) is showing in Green light even before I input the amount in the Amount field.(WRBTR)
    2. And also, if the total invoice amount is USD 1000.00, the amount field is allowing any higher amount. How do i control that ?
    Thanks
    Maruthi Ram

    Hi,
    U can Block Invoice for Higher Limit as well as lower Limit.
    Go to SPRO -->  MM --> Logistic Invoice --> Invoice Block
    Here Go to Company Code and PP - Price Variance and maintain Upper and lower Limit.
    Hope Help U !
    Regards,
    Pardeep Malik

  • Deduct TDS amount in invoice amount with conditions ?

    Hi Experts,
    My client had a requirement that, the business partners deduct TDS in two conditions:
    1  Deduct TDS if the single invoice amount is more than 20000 and
    2  Deduct TDS total invoice amount is more than 50000.
    how can we configure the situation ?
    regards,
    Sanju M S

    Hi!
    Also, post the question to Partner Add-on Forum and to the citixys

  • Diiference in invoice amount allowed to be posted

    Dear All
    While doing invoice verification through MIRO the total invoice amount comes out to be 155.50 SGD.User changed this amount to 155.53 SGD and was allowed to post the invoice despite the user not allowed to post invoice with any amount difference than the invoice amount.Why did SAP allowed user to post invoice with difference and how can we stop the user from posting invoice with difference in amount in future?
    Waiting for an early response.
    Regards
    Satish Kumar

    Hi Satish,
    Can you please check OMRX: Configure Vendor-Specific Tolerances?
    You may also check the corresponding documentation for the customizing.
    Total-based acceptance
    If the difference is within the tolerance range, the system automatically generates a difference line on a neutral income/expense account for small differences for invoices with debit/credit differences when posting the invoice.
    Total-based invoice reduction
    If the difference is within the tolerance range, the system posts the difference to a clearing account and generates a credit memo in a second document to clear this.
    Thanks and regards,
    Polly

  • Invoice amount-tds amount=check amount discoverer report

    Hi,
    In ap_invoice_payments_all table AMOUNT column -Ve ,+Ve amounts are coming in one column how to get the saperate columns in discoverer.
    EX:-Invoice amount(1000)-tds amount(200)=check amount(800)

    Hi phani,
    AMOUNT column -Ve ,+Ve amounts are coming Here tds amount is nothing but the tax deducted source,which will be applicable at the inovice level.For example the TDS amount will be applicable to that supplier where he has raised credit memo and there will be say 2% of tax deductable from the invoice amount of 100 then
    100(invoice amount)-20(tds)=80(payment amount).
    You can find this,i mean it will be described as a descriptive flex field in ap_invoice_distributions_all .
    Spliting can be done through DECODE or CASE
    Hope this helps you.
    Best Wishes,
    Kranthi.
    Edited by: Kranthi.K on Jun 19, 2009 4:27 AM

  • EMI/Receivalbe balance amount with respect to Invoice Amount

    Hi,
    I have requirement like Invoice total amount and Receipt amount. Every month it has to accumulate the receipt amount and need to tell Open Receivable amount for that particicular month.
    Eg: We have purchased a car and paying EMI every month and need to know the balance of the every month. Need to add the receipt amount of previous months paid and this month paid and tell the total balance against to Total Invoice amount.
    Below is the some rough numbers,I want to plot Line chart for this Open Receivable amount with respect to the Total Invoice Amount with respect to Receipt month. Can you please let me know, how can we achieve this requirement ?
    This is raw data Table:-
    Invoice Date      Receipt Date      Receipt Amount      Open Receivable      Invoice Total Amount
    November      12/31/2013           119                           2,328                     2,447 
    November      1/22/2014             120                           2,327                     2,447 
    November      1/31/2014             576                           1,871                     2,447 
    November                                     0                           2,447                     2,447
                                           Sum: 815                           
    I need in this way :-
    Invoice Date      Receipt Date      Receipt Amount      Open Receivable      Invoice Total Amount
    November      12/31/2013           119                           2,328                     2,447 
    November      1/22/2014             120                           2,208                     2,447 
    November      2/31/2014             576                           1,632                     2,447 
    November                                     0                           1,632                     2,447
                                           Sum: 815                           

    Hi Sathis,
    I have same other requirement for SHOP. I have same Objects as above meaning Invoice Date, Invoice Total amount, Receipt date and Receipt Amount and Group ID for the Account.
    I need to count the Group ID where it's not 100 % paid.
    Can you please let me know, how we can achive this requirement as well ?
    Thanks

  • How to apply a PO-matched prepayment invoice that has an extra tax line??

    I have a situation where I created a prepayment that's matched to a PO, but since the prepayment invoice document has VAT associated to it and not the PO, I need to add that extra line. So after matching the prepayment to the PO, I added an extra line on the prepayment as Item type TAX.
    Now after creating the actual invoice, when trying to apply the prepayment on the invoice, I can only see the actual PO amount and not the VAT line that was added afterwards to the prepayment. Therefore the invoice goes on a distribution variance hold.
    My question is how would I be able to create a prepayment that's matched to a PO and that has an additional TAX line and then later on apply the full amount to an invoice?
    All responses appreciated!

    Hello
    I still have to investigate for a problem with prepayments and line level calculation also (no PO matching involved), here is what I foundin the main AP doc (115apug.pdf, 4-150 to 4-155)
    *Applying Prepayments in the Invoice Workbench*Payables creates Tax distributions automatically either when you choose the Calculate
    Tax button in the Distributions window, or when you submit Invoice Validation for the
    invoice. For invoices you enter in the Invoice Workbench, you can apply a prepayment
    either before or after you validate an invoice, or while you are entering it. If you use Line
    level or Tax Code level automatic tax calculation, Payables always creates separate tax
    lines for your Item and Prepayment type distributions.
    Note: Use automatic tax calculation to create tax distributions for
    prepayments. Manually created tax distributions for prepayments are
    not included in the Distribution Total. If the Distribution Total does
    not match the Invoice Amount, Payables applies a hold to your invoice
    during Invoice Validation.>
    Hope it helps ;°)
    I'll keep you inform if I have further info about my case
    Xavier

  • Applying Tax code on document total as a whole.

    will it be possible to apply tax on a document total as a whole?
    for eg.
    I want to generate a purchase order for 3 items and doesn't want to apply tax code on line level.
    The document total will be say 5000 now i want to put tax code on this value.
    will it be possible.

    Hi,
    In SAP B1, You should link the Tax codes in row level (ie., for every item it's tax code should be defined in that row itself). We cannot define or calculate the tax amount for overall amount.
    Raja.S

  • The amount of down payment must be less than the invoice amount

    Hi all,
    Our customers are using SAP 2007-PL15 and SAP 2007-PL41.
    When we want to create a down payment for a sales order, and we want to pay the entire amount of the sales order, including tax, we have to put an amount inthe TOTAL field of the Down Payment window since by default, the down payment amount is the total of the invoice before applying tax.  The DPM is
    higher than 100% (strange but I think it's normal since the down payment is not planned to take the tax in consideration).
    Then, we create an incoming payment for this down payment. It's ok.
    Then, we create an invoice based on the sales order we have paid with the down payment. It's impossible to use the down payment for the invoice... why that ? We receive the error 'The amount of down payment must be less than the invoice amount'. This causes big headaches to our customers !!
    Could you explain us what to do please ?
    thanks,
    Luce

    I'm very sorry, I have a similar question in dealing with AP Down Payment Request Linked to AP Invoice,  my case like this:
    1. I created 3 AP DPRs,their amount are each 100,000 RMB(for example, their document number are 10,11,12). then do the outgoing payment fully paided.
    2. I created a AP Invoice with the amount 150,000 RMB(for example, this AR Invoice document number is 5). I use the buttom"Total Down Payment",and selecet AP DRP No.10 and 11. When I click the buttom"Add",an error shows:
    The amount of down payment must be less than the invoice amount
    and I don't know how to continue.....
    Many Thanks
    Kam
    (PS:My English is poor,forgive me please. Shall I Speak in Chinese? then I can describe this question more clearly.)

Maybe you are looking for