Applying the floor
I'm new, and this is such a simple question I couldn't find the answer within these forums...
I want to get a "floor" in Motion because EVERYWHERE you find videos about applying shadows and reflections for add "realism," but I can't even figure out how to GET a floor. So, any direction is greatly appreciated. All i need is a direction.
Thanks a ton,
Jer
Yo wetdog.
I find that the easiest way to apply a floor so that you can keep track of its position and angle as you add other elements on top of that floor with shadows, reflections etc. - is to draw a rectangle (first create a new camera) and rotate the rectangle about its x axis to exactly 90 degrees. Start with that. Then add some lights and play with those until you get the floor lit how you want it. Then bring in your text or image or whatever that you want sitting on the floor. Adjust your camera until the floor and your added objects suit the desired perspective for the shot you want.
If you start with your rectangle (floor) at exactly 90 degrees, then you will always have a good reference point as you move your objects and camera around the floor as you build your project - they key here seems to be keeping things simple. If you create your floor at weird angles, then the whole '3D' part of your project can get confusing in a hurry.
Good luck.
Similar Messages
-
Error : While applying the Patch 4440000
Error : While applying the Patch 4440000
FAILED: file igwprop.odf on worker 1 for product igw username IGW.
When i check the worker log file i got this error
The sequence IGW_AWARDS_S in the database is defined as:
MINVALUE = 1 MAXVALUE = 2147483647 INCREMENT BY = 1
CYCLE = NO ORDER = NO CACHE = 1000
which should be defined as:
MINVALUE = 10000 MAXVALUE = 2147483647 INCREMENT BY = 1
CYCLE = NO ORDER = NO CACHE = 1000
(Note: The cache value for sequence IGW_AWARDS_S is 20 in the ODF file. The value 1000 is being used instead because this provides better performance when selecting from the sequence.)
Alter the sequence with :
Start time for statement below is: Sun Oct 06 2013 22:16:28
ALTER SEQUENCE IGW.IGW_AWARDS_S MINVALUE 10000
AD Worker error:
The following ORACLE error:
ORA-04007: MINVALUE cannot be made to exceed the current value
occurred while executing the SQL statement:
ALTER SEQUENCE IGW.IGW_AWARDS_S MINVALUE 10000
AD Worker error:
Unable to compare or correct sequences
because of the error above
Time when worker failed: Sun Oct 06 2013 22:16:28
plz help me in solving this.Check the current value of IGW_AWARDS_S sequence and make sure the MINVALUE in the patch (i.e. 10000) is not greater than the current one.
OERR: ORA 4007 MINVALUE cannot be made to exceed the current value (Doc ID 19824.1)
You may also log a SR.
Thanks,
Hussein -
How to apply the constraint ONLY to new rows
Hi, Gurus:
I have one question as follows:
We need to migrate a legacy system to a new production server. I am required to add two columns to every table in order to record who updates the row most recently through triggers, and I should apply not null constraint to the columns . However, since legacy system already has data for every table, and old data does not have value for the 2 new columns. If we apply the constraint, all of existing rows will raise exception. I wonder if there is possibility to apply the constraint ONLY to new rows to come in future.
Thanks.
SamWe need to migrate a legacy system to a new production server. I am required to add two columns to every table in order to record who updates the row most recently through triggers, and I should apply not null constraint to the columns .
The best suggestion I can give you is that you make sure management documents the name of the person that came up with that hair-brained requirement so they can be sufficiently punished in the future for the tremendous waste of human and database resources they caused for which they got virtually NOTHING in return.
I have seen many systems over the past 25+years that have added columns such as those: CREATED_DATE, CREATED_BY, MODIFIED_DATE, MODIFIED_BY.
I have yet to see even ONE system where that information is actually useful for any real purpose. Many systems have application/schema users and those users can modify the data. Also, any DBA can modify the data and many of them can connect as the schema owner to do that.
Many tables also get updated by other applications or bulk load processes and those processes use generic connections that can NOT be tied back to any particular system.
The net result is that those columns will be populated by user names that are utterly useless for any auditing purposes.
If a user is allowed to modify a table they are allowed to modify a table. If you want to track that you should implement a proper security strategy using Oracle's AUDIT functionality.
Cluttering up ALL, or even many, of your tables with such columns is a TERRIBLE idea. Worse is adding triggers that server no other purpose but capture useless infomation but, because they are PL/SQL cause performance impacts just aggravates the total impact.
It is certainly appropriate to be concerned about the security and auditability of your important data. But adding columns and triggers such as those proposed is NOT the proper solution to achieve that security.
Before your organization makes such an idiotic decision you should propose that the same steps be taken before adding that functionality that you should take before the addition of ANY MAJOR structural or application changes:
1. document the actual requirement
2. document and justify the business reasons for that requirement
3. perform testing that shows the impact of that requirement on the production system
4. determine the resource cost (people, storage, etc) of implementing that requirement
5. demonstrate how that information will actually be used EFFECTIVELY for some business purpose
As regards items #1 and #2 above the requirement should be stated in terms of the PROBLEM to be solved, not some preconceived notion of the solution that should be used.
Your org should also talk to other orgs or other depts in your same org that have used your proposed solution and find out how useful it has been for them. If you do this research you will likely find that it hasn't met their needs at all.
And in your own org there are likely some applications with tables that already have such columns. Has anyone there EVER used those columns and found them invaluable for identifying and resolving any actual problem?
If you can't use them and their data for some important process why add them to begin with?
IMHO it is a total waste of time and resources to add such columns to ALL of your tables. Any such approach to auditing or security should, at most, be limited to those tables with key data that needs to be protected and only then when you cannot implement the proper 'best practices' auditing.
A migration is difficult enough without adding useless additional requirements like those. You have FAR more important things you can do with the resources you have available:
1. Capture ALL DDL for the existing system into a version control system
2. Train your developers on using the version control system
3. Determining the proper configuration of the new server and system. It is almost a CERTAINTY that settings will get changed and performance will suffer even though you don't think you have changed anything at all.
4. Validating that the data has been migrated successfully. That can involve extensive querying and comparison to make sure data has not been altered during the migration. The process of validating a SINGLE TABLE is more difficult if the table structures are not the same. And they won't be if you add two columns to every table; every single query you do will have to specify the columns by name in order to EXCLUDE your two new columns.
5. Validating the performance of the app on the new system. There WILL BE problems where things don't work like they used to. You need to find those problems and fix them
6. Capturing the proper statistics after the data has been migrated and all of the indexes have been rebuilt.
7. Capturing the new execution plans to use a a baseline for when things go wrong in the future.
If it is worth doing it is worth doing right. -
mac book pro 17 over £2000 when new in the middle of the night i heard a loud noise found out that my laptop was on the floor looked and seen screen was craked and that what looked to me the battery had exploded coursing it to fall on to the floor the was nor warning and have had no recal letters from apple warning me that this may happen . so i phoned up apple and was speacking to some one i have thare name but wont say explaind what had happend an he said that it was normal to my shock as if it landed on any one or poss a pet as it was random .he said it was normal more than once and also i was on speaker phone and had some one else listening .i asked for him to send me what he had said via email but he said he could not so he put me through to some one called katalin who said to ignore what he had said . but at this stage i had two isues one that my expensive laptop is damaged .and the second it thta thay admited liyability by saying it was normal
after many emails and phone calls i think there best offer was if i spend about 184 pound thay would give me a £54 discount which as i have just spent over £2200 on new macbook pro was a bit on an insult
i do under stand that batterys do charge but as i had no warning especial if this was going to happen
if as thay said this is normal as it was bourght from apple direct should thay have sent a letter or email as thay would have had my details warning me that this can randomly happen as in my case .
the battery in my opinion has exploded ref defonition and .
my consern is that this could have been alot worse and no warning even thay admited that it is normal
.that sent me a letter basicly say all about my waranty .but how can this be so defently a safty isue regarding my case
i cant just buy new battery because screen craked and dont no any other things wron ref fall fery disapointed with apple but i do not have the money or time to take any further .i and my familey have many apple products and were due for upgrading but hard to think are thay save.as iphones /apads/macbook /macbookpro/and other products very disapointed .dont think i would have been treated this way by dellu can give try to using external enclosre and backup ur files. I hope u will get files back. or using external enclosre with ur hdd boot into Linux and try to mount ur harddisk.
there are multiple no of tutorial to mount apple partion in Linux. -
Classical Report for linking/applying the goods receipts transaction
Classical Report for linking/applying the goods receipts transaction quantities against oldest schedule line item dates and then downloading the file to Excel.
o Classical Interactive Reports for calculating average Day Payable Outstanding. Option 1) in summary by company code, vendor, currency. (w/ DPO calc) Option 2) in detail (w/o DPO calc) Option 3) special summary by vendor and roughly convert different currency into one currency of choice, using current YEARLY rate.
thow to do these objects
plz assist me
and how to transfer the data from from one server to other like 3.1 to 5.0
plz assist me
Edited by: Alvaro Tejada Galindo on Feb 21, 2008 5:28 PMHi,
You can use Call Transcation tcode
for calling the transaction u can pass values to the transaction by using SET PARAMETER ID and GET PARAMETER ID
technique.
For downloading use function module LIST_DOWNLOAD
or GUI_DOWNLOAD. -
How do you apply the same password policy to every PDF document you create with inDesign?
All,
Adobe peeps!,
I don't know if this is really supported with inDesign 5.5, but here is my my use case:
I constantly create more than 10 PDFs a day using inDesign
On all PDF's I create, i want to apply password security to protect them
But in order to do so, within inDesign, I am always forced to go to the "security dialogue" pane to set up the same permission and passwords over and over again
This gets tiring :/
So what I am hoping to do is the following:
Like acrobat, I want to create a password policy within inDesign
I want all PDFs created to have such a password policy be automatically applied
I know acrobat supports something like this (http://help.adobe.com/en_US/acrobat/pro/using/WS58a04a822e3e50102bd615109794195ff-7d68.w.h tml), but, unless I may have missed something, the Acrobat feature is limited. That is, the help link does not tell me how to automatically do this with Acrobat either (the link does not explain to me how to "automatically apply the same password security policy to every PDF document I save within the application). I think the only way to do so is via "Adobe LiveCycle Rights Management ES", but for non server users, I am hoping there is another way.
So my questions are:
Is it possible to create password security policies in inDesign?
Is it possible to apply the same password security policy to every PDF i create in inDesign?
If not, can I change default settings within Acrobat ProX to automatically apply a password security policy everytime I save a PDF?
If all fails, do you guys know of any extensions that can support this?
Any help would be great. Thanks!Steve,
Thanks for your notes. To follow up on your response.
Bummer. I kinda had a hunch at this inDesign limitation.
I have been aware of the method for setting up of a security policy within Acrobat. While this feature does cut down some of the work involved in creating and applying password policies to pdfs, what I am looking for with Acrobat is to apply the same password policy to every document I save from the app. Automatically. Without having to manualy select a policy.
I think my solution will have to lie in me creating some sort of script to help support this need. I don't think Acrobat Pro X has the capabilities to allow me to tinker with, say, creating a save PDF preset that will allow me to automatically apply a password policy.
PS. I am using acrobat pro x. -
Hi All,
I have a large domain and a long list of websites that are trusted using the following group policy setting:
Administrative Templates > Windows Components > Internet Explorer> Internet Control Panel > Security Page >
Site to Zone Assignment List
On all (XP/vista/win7) workstations across the domain I'm getting the following error:
Log Name: System
Source: Microsoft-Windows-GroupPolicy
Event ID: 1085
Task Category: None
Level: Warning
Keywords: Description: Windows failed to apply the Internet Explorer Zonemapping settings. Internet Explorer Zonemapping settings might have its own log file.
There's nothing either side of this error in the log that shines any more light on the issue.
I know which group policy object its applying these settings but cant find which of the entries in the site to zone assignment list is causing this issue. I looked in the
Group Policy/Operational log but all I see is the following entry which says "completed" but is logged as an error:
After some research I'm guessing that the issue is an incorrect wild-card. This is what my trusted sites list looks like (with names removed of course):
http://servername.*
*.internaldomain.com.au
*.domain.com.au
*.domain.*
*.externaldomain.com
*.domain.inernaldomain.com.au
*.domain.*
*.domain/name.*
*.domain.inernaldomain.au*
*.domain.com
Is there something obviously incorrect here?
Does anyone know where I could find an article that clearly outlines the acceptable wildcard syntax for the
"Security page\ site to zone assignment list" group policy? Ive read every forum post, website and blog I could find on the internet but nothing is clear and I wasn't able to find an MS document that steps it out. I've also changed the
existing list a number of times based on blog posts etc but had no luck.
**Please Note**
I dont want to change to a different method or have an intellectual debate re why I would have these sites/wildacrd/policy set. I'm really looking to see what entry is invalid and where the documentation is for this policy setting so i can make sure they are
always correct in the future.
thanks in advance for your time and assistance
Simone
PS: I've already read the following posts a number of times:
I get no data but have identified the GP that is causing the issue:
A test case for troubleshooting group policy application – Event ID 1085 and 7016 - http://blogs.technet.com/b/askds/archive/2008/08/21/a-test-case-for-troubleshooting-group-policy-application-event-id-1085-and-7016.aspx
I dont have any 2 letter domain names:
Problems Adding Top-Level Domains to Zone Sites List - http://support.microsoft.com/kb/259493
I tried formatting the list per this article:
[Solved] The Group Policy client-side extension Internet Explorer Zonemapping failed to execute - http://daily-it.blogspot.com.au/2008/09/solved-group-policy-client-side.html
Has no domain wildcard format info:
Behavior of Site to Zone Assignment List - http://blogcastrepository.com/blogs/mattbro/archive/2006/09/07/2183.aspx
Great article, no wildcard data:
Internet Explorer Policy Settings - http://technet.microsoft.com/en-us/library/bb457144.aspx
Internet zonemapping problem: http://social.technet.microsoft.com/Forums/en-US/winserverGP/thread/a8756a27-b562-42ad-8782-87d284e6bcfb/
Spiceworks Event 1085 (Warning) - http://community.spiceworks.com/windows_event/show/1582-microsoft-windows-grouppolicy-1085
Event ID 1085 — Application of Group Policy - http://technet.microsoft.com/en-us/library/cc727303%28v=ws.10%29.aspx
Application of group policy - http://technet.microsoft.com/en-us/library/cc727312%28v=ws.10%29.aspx
Evt ID 1085 GP client-side extension IE ZoneMapping failed to exec - http://www.winvistatips.com/evt-id-1085-gp-client-side-extension-ie-zonemapping-failed-exec-t706399.html
Event 1085 - Internet Explorer Zonemapping - http://www.minasi.com/forum/topic.asp?TOPIC_ID=29206
EventID.net - http://www.eventid.net/display.asp?eventid=1085&eventno=1412&source=Userenv&phase=1
Event ID 1085 - Internet Explorer Zonemapping failed to execute - http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/2003_Server/Q_24897522.html
UPDATE:
I disabled the original policy and created a new one with only one trusted site address in it. Then I logged into a clean test machine did some testing.What I found after a few hours of testing was; regardless of the site that I have listed in group policy
The HKCU\Software\Policies\Microsoft\Current version\Internet Settings\Zone Map Key registry entry is
always updated with that entry on the workstation. So the workstation's registry always updates the key with
*.sitename.com per the site that I have set in GP
If I run GPUPDATE /FORCE over and over again, on the same machine, under the same user account, using the same DC I get:
Failure, Failure, Failure, Success, Success, Success, Failure etc
I wasn't able to determine any pattern to the failures, I tried stopping some of the processes on that machine but didn't find anything that would make it fail/succeed reliably.
There is no AV or firewalls installed on my test machine
Anyone have any more ideas? I think I might install filemon and try to capture some more data unless there's a better tool?Yes, and that's straight from my Microsoft TAM. As long as you include an asterisk inside those site-to-zone mappings, you'll continue to see them. The key is whether or not they're working. In my environment, I've seen complete success using the
http://*.domain.com, or
https://*.domain.com, no matter if the site is http://www.domain.com or
http://milk.does.a.body.good.domain.com. Despite the success, we continue to see the errors. It's much the same as Group Policy Preferences where you can apply a setting once, or repeatedly. If you apply
something repeatedly and it's already set, lookout for some complaints in the application log. It really is annoying. There's potential to play with the logging levels, but I'll admit that my experience ranks as "novice" in this specific section of group policy.
This link might get the creative juices flowing:
http://blogs.technet.com/b/askds/archive/2008/07/18/enabling-group-policy-preferences-debug-logging-using-the-rsat.aspx
I see you've already read a number of articles including "a test case for troubleshooting those event IDs"... I sympathize with your efforts. I despise warnings and errors that I can't solve or don't want to see, but I've researched a number of them to death
and found that many are simply "normal". Uggg... I hope this helps, but please take my advice, as with anyone else's out here, with caution. I've seen some crazy recommendations. I saw a recommendation to install SQL on a DHCP server to get failover clustering
up and running. I hope the guy asking for help didn't listen to that one! : ) - josh -
Everytime I copy pages from one ID CS3 doc to another, it re-applies the master page objects!!
Please Help,
This is a topic I would really like to get to the bottom of.
We have InDesign CS3 templates for creating our reports.
These templates contain around 10 different master pages with grey placeholder image boxes and text boxes with dummy text.
When we copy pages from one ID document to another, all the master page objects that were originally assigned to the pages are re-applied!!
Resulting in lots of grey dummy boxes and text boxes re-appearing on top of the page items!!
It's so annoying because we always customise the pages once we've pulled down master pages to work on, so when we copy pages across to other documents we have to apply the blank master to be able to kick out all the master objects easily. Then we need to add the page numbers and footers back onto the blank master page.
My question is, is there a way to switch this off, so when I move or copy pages from one document to another, nothing happens relating to master page objects, the pages simply just copy across as they are?
Please help! If not I may have to ask an external developer to write a script to fix this, it drives 900 of us crazy!
thanks in advance for any help.
Or am I just being ridiculous and not actually realising you can switch this off, doh!
GJust a bit of further clarification on this issue (very few people really understand what's going on with master pages and overridden master page items):
When you override a master page item, the object is moved to a local page, but a connection is maintained with the original master page item. This a) allows for the override to be removed (and return the object to its original state). This also, b) allows for changes made to the original master page item (other than the changes made to the local item from the point that it was overridden) to effect the local item as well.
When the connection to the master page item cannot be maintained, the local item gets disconnected totally from the master page, and becomes a regular, run-of-the-mill page item.
In light of this, there's three ways you can end up with duplicate master items:
Reapplying a master page (or applying a new one). When you reapply a master, all overridden master page items get detached from the master, and the original mster page item appears again in its original state. Most of the time this produces unwanted duplication of objects. To fix up your page, you have two options: a) Delete the master page item, and b) copying the contents of the original to the new master page item. The disadvantage of "a" is that you end up with an item which is totally detached from the master, and changing the item on the master will have no effect on the local item. The disadavantage of "b" is that it's a lot of work...
Moving a page to a different document. When you move a page to a different document which has the same master as the one originally applied, the master in the new doc is applied, and the effects are identical to reapplying a master page (i.e. overridden objects are detached). If the applied master (i.e. a master with the same name) does not exist in the new doc, the master is transferred over to the new doc along with the page, and the connections to the master page are preserved (well, re-created actually...). The workarounds in case #1 apply here as well.
When page sides change in a document, the objects on the facing page appears.
What happens here is a bit confusing, but here's an approximate explanation:
When you apply a master to a page or spread in InDesign, what you are actually doing is applying an entire spread to an individual page. You can thing of a master spread as an overlay (or more precisely: underlay) on the page with a window cut out to the exact page dimensions.
When the page side changes that "window cut-out" shifts to show the master spread items which correspond to the position within the spread of your current page (i.e. recto or verso). All objects which exist outside the window shift out of view (but still exist!).
When an object is overridden, the position of the object is defined by its location on the local page, NOT its position on the master spread. When the page then changes sides, the object remains where it was on the page (even though the object it's connected to on the master spread moves out of the window of view). A corresponding object on the facing page of the master (if it exists) will then show in addition to the overridden one.
Now remember: contrary to the first two cases, both objects are based on master ones: one visible one and one invisible one.
Dealing with this third case requires much more care than the first two.
The obvious way to deal with this would be similar to the first two, but if you remove the local object and transfer the content to the new maste object, the invisible master object on the non-visible page was actually removed, so when the page sides change again, the object will now be connected to the now-invisible master page item, and the correct master page item will be gone!
The "correct" way to deal with this would be to transfer the content to the new master page item and remove overrides (not delete!) on the local item (which will make it disappear, because it moves back to the invisible page). Of course, when page sides change again, it becomes necessary to repeat the entire process.
If the local object gets deleted, then your master spread is missing objects with no visible indicator of the fact. This can lead to confusion when the document might be edited at some later point in time.
I believe that this complicated and un-intuitive behavior of master pages is part of the reason people tend to avoid using master page items. Documents tend to get messed up in really odd ways... It's a real shame, because extensive use of master page items has a lot of potential for streamlining workflows and saving an awful lot of time. This behavior really puts a damper on really using master pages as templates.
Getting master page items to work the way they "should" was a big part of what I was trying to accomplish with AutoFlow Pro... When the master page items are defined as such (i.e. given a unique name), AutoFlow Pro solves all three of the above issues by keeping overridden master page items connected to the master page items on the currently applied master (and when a new master is applied as well!).
(When I have a bit of spare time, I think I'll write this up on my blog with some visuals to make this easier to grasp...)
Harbs -
I have two faults! 1, an error comes up in Ps CC 2014 "could not apply the saved panel configuration, restring to default and my tools have disappeared completely and anything ive tried I cannot get them back not even the drop down menu in 'window' helps at all. And 2, Lr everytime I load it up it gives me the option to retry or switch to and it takes a while for me to even get anywhere with it I think it has something to do with the catalogs? I've been using these programs for a few years now on a Mac...no problem but when I use a PC when I'm away coz it's the (only) comp available these happen PC's are so useless! Please can anyone help??...
I can give a few suggestions on Photoshop CC 2014, but Lightroom is a separate forum and you should ask Lr questions there.
First close Photoshop.
Then start Photoshop by double-clicking on it's icon and very quickly after that, hold down the ctrl-alt-shift keys until you see the reset dialog. answer "Yes" to delete settings, and let Photoshop continue to load.
It's tricky to do and may take a few tries, but at least it should reset Photoshop CC 2014 to defaults.
Gene -
How can I re-apply the 5.03 patch?
I've asked this already in the CS5 5.03 update discussion, so aplogies for the repetition, but I thought I'd start a new thread.
I've had to roll back Win 7 to a time prior to 5.03 installation. I'm now back to 5.02 and can't reinstall 5.03. If I click the update button within PP tells me that all applications are up-to-date. So it would appear that the AAM is not detecting that I'm back to an earlier version.
When I manually try to install 5.03, the progress bar does not move, nor the percentage increase. However, after about 30 seconds, I'm informed that the update has completed successfully - but it hasn't! It is still on version 5.02.
Help. Can anyone please tell me how to re-apply the 5.03 patch without reinstalling PP? Thanks.> Surely there's a simpler way??
Not that I know of.
BTW, we are actively working on making the installers work more smoothly. We appreciate bug reports about the specific glitches so that we can make sure that we're working on the right things. -
Hello I have a problem with my ipod touch 1G the problem is that see me key to the floor! And when recogi not prendia after 5 minutes prendio but it gave to me the surprise of which the battery had finished completely! What I did was to set it to load with the USB but do not load the battery me the icon of the battery appear and below of her the beam that indicates that this being loaded but this way I have left it the whole yesterday and what goes of today and continues without loading anything! They can help me porfavor I am grateful for them to him very much! And my PC does not detect it not itunes
Try the not-charging topic of:
iPod touch: Hardware troubleshooting
It could be that the battery is dead. -
Once purchasing Indesign, how many computers can you apply the App on
Once you purchase Indesign App, how many computers are you allowed to apply the Application on?
You are allowed two activations at a time, but they are for one user only. (e.g., a desktop and a laptop or a work computer and a home computer)
-
I recently dropped my macbook pro from the couch and it fell on the floor that was about a foot down. Nothing really major happened except for that the same area where the screen is, on the exterior of that there is a slightly bent corner. I really wanted my macbook pro to look in good condition and I wanted to know if there is any way I can repair this or do I have to replace the whole lid. I would also like to know how much it would cost. Please Help!
Apple Genius Bar will know better, even if you did show us a picture. We are just users like you.
I would start keeping very regular backups regardless. -
Error in applying the patch to OBIEE 11.1.1.6.8
When I try to apply the opatch apply command, below is the error I am getting. I am not able to find the resolution for this. I am not understanding the problem by looking at this.
optach failed with error code 1
C:\Middleware\Oracle_BI1\16094198>opatch apply
Exception in thread "main" java.lang.NoClassDefFoundError: Files\Java\jdk1/7/0_4
5\lib;;C:\MIDDLE~1\ORACLE~1/modules/oracle/jrf_11/1/1/jrf-wlstman/jar;C:\MIDDLE~
1\ORACLE~1/modules/oracle/jrf_11/1/1/jrf-wlstman/jar
Caused by: java.lang.ClassNotFoundException: Files\Java\jdk1.7.0_45\lib;;C:\MIDD
LE~1\ORACLE~1.modules.oracle.jrf_11.1.1.jrf-wlstman.jar;C:\MIDDLE~1\ORACLE~1.mod
ules.oracle.jrf_11.1.1.jrf-wlstman.jar
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
Could not find the main class: Files\Java\jdk1.7.0_45\lib;;C:\MIDDLE~1\ORACLE~1/
modules/oracle.jrf_11.1.1/jrf-wlstman.jar;C:\MIDDLE~1\ORACLE~1/modules/oracle.jr
f_11.1.1/jrf-wlstman.jar. Program will exit.
I have installed OBIEE 11.1.1.6.0 version on windows 64 bit machine and later on I tried to apply the patch to upgrade it to 11.1.1.6.8 . Once I received above error , I thought of cross checking the PATH & Java_Home environment variables from my machine and below are snapshots of them.
Java Home : C:\Program Files\Java\jdk1.7.0_45\bin
Path: C:\oraclexe\app\oracle\product\11.2.0\server\bin;C:\Program Files (x86)\RSA SecurID Token Common;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Intel\Services\IPT\;C:\Middleware\Oracle_BI1\products\Essbase\EssbaseServer\bin;C:\Middleware\Oracle_BI1\bin;C:\Middleware\Oracle_BI1\opmn\bin;C:\Middleware\Oracle_BI1\opmn\lib;C:\Middleware\Oracle_BI1\perl\bin;C:\Program Files\Java\jdk1.7.0_45\bin
below are the commands executed in the first step before applying opatch apply on 16094198
set ORACLE_HOME=C:\Middleware\Oracle_BI1
set PATH=%ORACLE_HOME%\bin;%PATH%
set JAVA_HOME=%ORACLE_HOME%\jdk
set PATH=%JAVA_HOME%\bin;%PATH%
set PATH=%ORACLE_HOME%\OPatch;%PATH%
Any inputs on how to resolve this opatch problem will be greatly appreciated. Please let us know if I have to make any change in the environmental variables or in these set commands stated above.
Thanks in advance.Heelo Srini,
I have updated my JAVA_HOME system variable in environmental variables section as stated below
User variables:
JAVA_HOME : C:\Program Files\Java\jdk1.7.0_45
PATH : %JAVA_HOME%\bin
System variables:
ClassPath: C:\Program Files\Java\jdk1.7.0_45\lib;
Path: C:\oraclexe\app\oracle\product\11.2.0\server\bin;C:\Program Files (x86)\RSA SecurID Token Common;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Intel\Services\IPT\;C:\Middleware\Oracle_BI1\products\Essbase\EssbaseServer\bin;C:\Middleware\Oracle_BI1\bin;C:\Middleware\Oracle_BI1\opmn\bin;C:\Middleware\Oracle_BI1\opmn\lib;C:\Middleware\Oracle_BI1\perl\bin;C:\Program Files\Java\jdk1.7.0_45\bin
Later I tried to apply the patch but I got the below error
C:\Middleware\Oracle_BI1\16094198>opatch apply
Exception in thread "main" java.lang.NoClassDefFoundError: Files\Java\jdk1/7/0_4
5\lib;;C:\MIDDLE~1\ORACLE~1/modules/oracle/jrf_11/1/1/jrf-wlstman/jar;C:\MIDDLE~
1\ORACLE~1/modules/oracle/jrf_11/1/1/jrf-wlstman/jar
Caused by: java.lang.ClassNotFoundException: Files\Java\jdk1.7.0_45\lib;;C:\MIDD
LE~1\ORACLE~1.modules.oracle.jrf_11.1.1.jrf-wlstman.jar;C:\MIDDLE~1\ORACLE~1.mod
ules.oracle.jrf_11.1.1.jrf-wlstman.jar
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
Could not find the main class: Files\Java\jdk1.7.0_45\lib;;C:\MIDDLE~1\ORACLE~1/
modules/oracle.jrf_11.1.1/jrf-wlstman.jar;C:\MIDDLE~1\ORACLE~1/modules/oracle.jr
f_11.1.1/jrf-wlstman.jar. Program will exit.
OPatch failed with error code = 1
Please provide any inputs.
Thanks & regards,
karthik Vecham -
Error While applying the maintenance pack12.1.1
Hi All,
While upgradeing the applications from12.0.4 to 12.1.1 ,While applying the maintenance pack patch(7303030) iahave encountered the below error
worker failed with the below Error
sqlplus -s APPS/***** @/oracle/AMALCRP/apps/apps_st/appl/zx/12.0.0/patch/115/sql/zxmigratefc.sql
DECLARE
ERROR at line 1:
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "APPS.ZX_FC_MIGRATE_PKG", line 386
ORA-06512: at "APPS.ZX_FC_MIGRATE_PKG", line 978
ORA-06512: at "APPS.ZX_FC_MIGRATE_PKG", line 5017
ORA-06512: at line 6
Please let me know if ther is any possible solution for this
Thanks iN Advance
SagiFor the first Error
Sol:1. Download patch 8593634:R12.ZX.B and unzip the patch to a temoprary folder.
2. Backup the file $ZX_TOP/patch/115/sql/zxfcmigrateb.pls
cp $ZX_TOP/patch/115/sql/zxfcmigrateb.pls $ZX_TOP/patch/115/sql/zxfcmigrateb.pls-BKP
3. Copy the file zxfcmigrateb.pls from the patch location (/<PatchUnzipLocation>/zx/patch/115/sql/zxfcmigrateb.pls) to $ZX_TOP/patch/115/sql/zxfcmigrateb.pls
4. Execute the newly copied file using SQLPLUS:
sqlplus apps/<apps password>
SQL> @ $ZX_TOP/patch/115/sql/zxfcmigrateb.pls
5. Now re-start the failed worker for patch
Next i got the Error which is mentionedin the note 1299350.1
Sol:
1. Download patch 10250232:R12.ZX.A and unzip the patch to a temoprary folder.
2. Backup the file $ZX_TOP/patch/115/sql/zxfcmigrateb.pls
cp $ZX_TOP/patch/115/sql/zxfcmigrateb.pls $ZX_TOP/patch/115/sql/zxfcmigrateb.pls-BKP
3.
Copy the file zxfcmigrateb.pls from the patch location
(/<PatchUnzipLocation>/zx/patch/115/sql/zxfcmigrateb.pls) to
$ZX_TOP/patch/115/sql/zxfcmigrateb.pls
4. Execute the newly copied file using SQLPLUS:
sqlplus apps/<apps password>
SQL> @ $ZX_TOP/patch/115/sql/zxfcmigrateb.pls
5. Now re-start the failed worker for patch
But Theses patches require passcode which we getonly by logging an SR
Thanks
Vinay Varma
Maybe you are looking for
-
Printing to PDF Crashes InDesign, Word, Publisher and more
Hello, It was recommended by someone in the InDesign forums that I post my issue here, as my problem seems to be spanning through all programs that are capable of printing to PDF. I am running Windows 7 64 bit. I have 8gb of DDR2 ram in my machine at
-
So, my quite new, undamaged Lumia 720 has gone completely dead. I took some photos and soon after that shut it off for the night to conserve battery (which was at 47% at this point). The las photo doesn't show up at skydrive, so I shut the phone off
-
Hi All, Please help with the error ORA-00923: FROM keyword not found where expected. I am trying to execute the following SQL query. SELECT CASE WHEN (Grouping("PRICECATEGORY"."PriceCategoryName")=1) THEN "PriceCatTotal" ELSE "PRICECATEGORY"."PriceCa
-
Any search engine search crashes Firefox.
Any search engine search instantly crashes any browser I try (Firefox, Chrome, IE). I have checked all my add-ons, used safe-mode, and reinstalled Firefox--nothing has worked.
-
i instole Yosemite and i lost every thing that was in my macbook pro. such as Word, Excel, windows 8 and all my documents. Help