Applying the same effect to multiple clips.

I have a piece of video split into parts on the time line. I'm trying to apply 1/ A continuous time code, using "time code generator" and the "viewfinder" effect.
Is there a way of applying these effects at the same settings to all 3 clips at the same time and also making the time code run continuously?
I've noticed when i apply these 2 effects to the individual clips with all the same size settings, they appear different on each clip.
Any ideas?

If I read your question correctly I would suggest adding the filters to one clip and then copy the clip.
Then highlight the clips you also want those effects on and control-click and select paste attributes and check "filters".
Here's the problem though with you wanting to use continuous timecode. The timecode generator won't deliver what you want if you're cutting and moving clips around the timeline. For that you would want to use Timecode Reader instead

Similar Messages

Applying the same effect to multiple clips in a sequence?

I have edited a trailer containing multiple clips in a sequence and I want to add the same amount of sharpen to each clip. Is there a quick way of doing this instead of clicking on each clip seperately and applying the effect, adjusting it and so on....?

If you already have filters applied to the clips, then open the first clip in the Viewer and apply the filter you want - make adjustments as needed. Select all of the other clips in the Timeline that you want to apply the same filter and settings, then drag the filter from the clip in the Viewer to the highlighted clips in the Timeline.
-DH

Applying the same transition between multiple clips

Does any know how to apply the same transition to multiple clips that are all ready in the timeline? I remember attending an Adobe Premiere Workshop years ago and I'm sure they demonstrated that technique. It's would be such a time saver. Perhaps it was a Final Cut Workshop.

Don't you get something like this:
That works perfectly for me. Have you updated to CS4 4.1?

Applying the same 'fix' to multiple clips

Hi guys,
I am sending about 30+ individual sound-clips from FCP to Soundtrack for noise reduction.
My question: How do I apply the filter that I make (or the work I do) on one of the clips to apply to all?
Thanks in advance!

If I read your question correctly I would suggest adding the filters to one clip and then copy the clip.
Then highlight the clips you also want those effects on and control-click and select paste attributes and check "filters".
Here's the problem though with you wanting to use continuous timecode. The timecode generator won't deliver what you want if you're cutting and moving clips around the timeline. For that you would want to use Timecode Reader instead

How can I apply the same crop to multiple photos?

It is easy to apply the same Adjust settings to multiple photos by using the Copy and Paste in the Adjust pane. Or by using iPhoto Batch Enhancer.
But can you apply the same crop to multiple photos? I don't see any way to copy a crop. iPhoto Batch Enhancer can do something like it but, being an external editor, it does so on a copy of the photo. I want it on the original photo. (Well, it's not really the original since that one is saved separately in the Library but on the current version).
Thanks for any suggestion.
Bo

Here's how:
1 - bring up the first photo in the edit window and click on the Crop button or *use the "C" key on the keyboard*.
2 - set the crop size/ratio in the menu and position the crop window over the photo as needed.
3 - click the Apply button or *use the Enter key*.
4 - click on the right arrow in iPhoto or *use the right arrow key on the keyboard* to bring up the next photo.
5 - click the "C" key to bring up the crop function.
6 - repeat steps 2 thru 5 for each photo.
This video screenshot shows how:
Click to view video screenshot
Happy Holidays

Is there a way to apply the same transition between all clips?

Or is there a way to apply random transitions? Either way I'm too lazy to drag a transition between every clip and hope there's a bulk way I haven't found yet. I'm using iMovie HD 6.0.2 (267).
Thanks!
--Daniel

Daniel,
To apply the same transition between all clips, select all the clips, select the transition (and timing) then click ADD (at the bottom right of the transitions screen). The transitions will be rendered, one at a time between all the clips. If you wish to change the transition, again select the required clips, select the new transition, then click UPDATE.
I'm not aware of any way to apply random transitions.
John

Applying the same ActivationConfigProperties to multiple MDBs

Is there a portable way of applying the same ActivationConfigProperties to multiple MDBs?
I think it's typical for many applications to contain MDBs which differ only in the destination name so it should promote ease of use and convention over config to have such a feature, say for JMS 2?
Motivation for asking is:
In Jboss 5.1.0 one could use a container defined AspectDomain to define a set of properties that an MDB inherits and overrides at will. This allowed externalization of config properties as well as reuse. This is no longer available in Jboss 7.1.X. and I found myself having to create an ejb-jar.xml file
that contains
<ejb-name>MDBName</ejb-name>
      <activation-config>
        <activation-config-property>
          <activation-config-property-name>destinationType</activation-config-property-name>
          <activation-config-property-value>javax.jms.Queue</activation-config-property-value>
        </activation-config-property>
        <activation-config-property>
          <activation-config-property-name>providerSpecificProperty.eg.queueManagerHostName</activation-config-property-name>
          <activation-config-property-value>${departmentA.queueManager.hostName}</activation-config-property-value>
        </activation-config-property>
      </activation-config>
...where ${departmentA.queueManager.hostName} is an ant style variable configured in Jboss 7 standalone.xml. There's quite a lot of those provider specific properties that I had to define. Then I had to copy and paste the same configs for all the MDBs I had keeping only the queue name definitions on the MDB.
I'm not really looking for the externalization in this request since that's container specific but putting the properties in one place to apply them to multiple MDBs could be helpful in the spec.
One very crude approach would be to allow wildcards on the <ejb-name> values as is allowed for intercepted classes in interceptor definitions (which would make it a request for the EJB spec rather than JMS?)
Anyone know something I can use now with the current specs that allows definition of config properties at one place and reusing the configs over multiple MDBs?

I've asked around (and checked the EJB spec), but I haven't found any way to do this.
Nigel

Can I set a default to effect settings? Or apply the same effect settings to multiple clips?

If I want to set multiple clips to have the same effect, can I do that without resetting the effects every time I add it?
Or can I set a default setting to an effect that is different from the default default?

ATalkingFish wrote:
Can you elaborate on how to use copy/paste attributes with effects?
the Manual says :
http://help.apple.com/finalcutpro/mac/10.0.6/#ver3029fc422

Applying the same effect or animation to multiple clips with one edit

I'm using FCE4.0.
I'd like to select three clips in the time line and apply the same sizing or Animation to all three clips. Is it possible to do that without going to each clip individually?
As an example, I have three clips with video that fills the screen. I want to reduce the video image to say 50% of the overall window. Do I need to resize each clip? Can't I just resize them all at once? Or apply an edit to them all at once that has the same animation?
Thanks!!

Size/position the first clip. Select Copy. Select the other clips. Select Paste Attributes and in that submenu, select Basic Motion

Best way to apply same effect to multiple clips?

I have a bunch of short clips in the timeline. I want them all to end with a "fade to black" and I want the audio to fade to 0 db. I know how to do this by applying the "fade to black" and then applying 1/2 a crossfade 0db. Is there a way to apply these two effects to several clips at once? How do I apply the audio and video effects together to a single clip with one move?

create the effect using the opacity and volume overlays on one clip in the timeline, then right-click and copy. Select (ie highlight) the other clips you want, right-click any of them and choose 'paste attributes'. From the pop up you'll want to check the relevant options, opacity and audio levels, and that's it.

How do you apply the same transformation to multiple layers?

I've been using PS for years and never had to do this before.
I have a 3D image of a tradeshow exhibit and I want to drop in a lot of different mocks for backgrounds. The 3D is in a slight perspective and I need to transform all the mocks to fit that space.
So how do I link my backgrounds and apply the same "skew" or free transform to all of the layers?
PS version CC 14.2.1 x64

What exactly am I alt+dragging?
My mistake. I was thinking about filters and alt-dragging them to a new layer. For a transform, you most likely will want to make one master SO, apply the transformation, then make duplicates via copy from the layer flyout menu. Then you can replace the content with the other layers.

How can I apply the same filter to multiple inboxes?

I am looking at transitioning from Outlook to Thunderbird -- mostly for the Google calendar integration.
The one thing I am having problems with is the filters. I have multiple email addresses and I would like to be able to apply one filter to all of the email addresses. Ie: I get an email from Bob sent to me on my email address 1 and the email goes to bob's folder. Then I get an email from Bob on my email address 2.
I would like to have the same rule to be effective for both of my email addresses so if bob uses either email address, the mail goes to bob's folder.
Right now it appears that I have to create a unique filter if I get email from 'bob' on email address 1 vs email address 2. Am I missing something?

Nope. Thunderbird's filters are specific to accounts.
You could set them up in one account, then copy that account's ''msgFilterRules.dat'' file to your other accounts.

How do you apply the same filter to more clips simultaneously?

I am trying to color correct a group of sequential clips and I was wondering if there is a way to apply the filter as if the clips were one single clip, without first exporting them.
Thank you for the help.

If you want to make the same color correction to multiple clips. color correct the first clip.
copy the clip
In the timeline highlight all the other clips you want the same color correction to be placed on.
Control-click a highlighted clip
Select paste attributes
check the filters box, hit okay

Is there a way to apply the same bumpers to multiple exports automatically?

Hello smart people.
I have an ongoing project in which I am creating hundreds of 60–120 second clips, all requiring the same intro-outro bumper. Every month I make about 125 of these.
Instead of manually applying these bumpers to each and every sequence, I would love to be able to ask Premiere or Media Encoder to find and attach the specified bumpers as a batch.
Is there a way to do this?
Working with the current updated version of CC 2014 (on a Mac).

What work do you have to do to in a Sequence to create the content between the Intro and Outro?
I assume it varies in length beween 60 secs and 120 secs?
I assume you have to select a clip or multiple clips and edit them to whatever duration in a new sequence for each?
If so...I dont see that its many extra steps to drop a 'Bumper' Nest ( fixed asset in Project Bin) onto Video 1 under the "edit" (Video 2 +) and ripple delete to tighten it up to the content.
Batch Export the Sequences in a Queue.

How can I/Is there a way to: apply a preset effect to multiple clips?

I will be editing a music video from this weekend in Premiere Pro CS4, is there a way I can paste a custom preset to multiple clips (selecting hundreds) without clicking each one and pasting/dragging?
If this can be done it's going to save me hours and hours of work!
If I try at the moment by CTRL clicking a few clips is only pastes/drags into 1 of the clips, not all of them!
any help would be appreciated

Yes, see the section
Copy and paste clip effects and
Apply effects to clips in the Premiere Pro Help.
Cheers
Eddie
PremiereProPedia
RSS feed)
- Over 350 frequently answered questions
- Over 300 free tutorials
- Maintained by editors like
you
Forum FAQ

Applying the same effect to multiple clips.

Similar Messages

Maybe you are looking for