Appplications using "Administrator" user id and password in J2EE engine...

All,
We have a EP 7.0 with SPS 14. Our "Administrator" user id account gets locked every now and then.
Eventhough if we unlock it or change the password using configtool, it works for sometime..but,again the "Administrator" user id account gets locked.
Somewhere some application is still using the old password. So,no matter what password we use or we updated the password everywhere..it works for some time and again the its getting locked.
Can anybody tell me how to find all the applications using "administrator" user id and password or the applications which requires administrator user id directly or indirectly.
Is nwds and nwdi deployment uses the "administrator" uidpw ?
Note: We have already tried with updating the password using configtool and updated the password all the places.it works for some time and it gets locked again..Please help..Thanks.

to Michael Nicholls
Addy 365 posts:
We have already tried with updating the password using configtool and updated the password all the places
Yes from log it looks like impossible to check, but you can determine immediately whether the blockage occurs after restart, or only at certain times of the launch of a job ....
To Addy 365
search after restart the lines in security log like
LOGIN.FAILED, and try to recheck ol RFC from all other system's you have in your enterprise ....
P.S. first check are you have any available RFC listeners in JCO RFC provider.
To Michael Nicholls    in ABAP side we can check in sm21 from with terminal blocking occurs, why Why the same is not implemented in JAVA? Or for this need special tool like Wily Introscope ?
Regards.

Similar Messages

HT4889 Question - administrator user name and password

I have recently acquired an Imac to replace my elderly G4 and wish to transfer the G4 content to the Imac using Migration assistant. The authentication box has opened on the G4 asking for my administrator user name and password but in a senior moment I find I cannot remember where they are. Can anyone help me?

Hello, peterandmo.
Thank you for visiting Apple Support Communities.
Here are the steps that will walk you through changing an admin account password using another admin account.
Resetting a user's password using an administrator account
Important: Passwords for administrator accounts should not be blank.
Log in with an administrator account. Tip: If you don't know the password of any administrator accounts, see "Resetting the original administrator account password" below.
From the Apple menu choose System Preferences.
From the View menu choose Users & Groups.
Click the lock button if it appears locked; enter the administrator password.
Select the name of the user whose password you want to change.
Click the Reset Password button or the Change Password button.
Enter a new password in both the New Password and Verify fields, and add a Password Hint if desired.
Click the Reset Password button or the Change Password button.
OS X: Changing or resetting an account password
http://support.apple.com/kb/ht1274
Cheers,
Jason H.

I am using the user name and password given to me by

I am using the user name and password given to me by Virgin on the email 'other' , after the initial page it comes up with IMAP settings which I don't have so I click on the POP page and give all the settings listed by Virgin on ints website (using ntlworld and not virgin as instructed) but it still comes up with 'Unable to Verify' So something is sticking somehwere but I don't know where!
Thanks very grateful for assistance

Try going into Settings > Mail, Contacts, Calendars and select that email account and try re-typing in the account's username and password

HT204053 Using multi-user IDS and passwords to access the apps website is turning me into an Apple hater, frankly. Am I alone in the crowd of users?

Ihave abouy 4-5 different user IDS and passwords that I have to juggle to get access to the Apps store. Almost every time I try to get an update, etc., I have to go through the routine of either changing both user ID and password, or just the password. I am a long-time Apple customer but have drifted as far as possible from using Apple updates and purchases. It's just not worth the time, exasperation and energy involved. I can understand that Apple doesn't want to have varied IDs wrapped into a single ID, but it would be helpful if Apple took the time to delete all but one user ID, upon the request of an Apple customer, instead of spending so much time issuing yet another iPad and iPhone. At least, have mercy on some of Apple customers who are still buying snd using laptops and desk tops. HELP!!!

I'm not sure how you came to have so many Apple IDs, but I'd suggest that you simplify things.
I just checked the "Apple ID Support" page:
http://www.apple.com/support/appleid/
as I imagine you have, too, and I find no instructions for closing or deleting an Apple ID, but you could simplify things quite a bit by using only one Apple ID on all of your devices.
It will take a bit of time, but I think you'll find that it's worth it.
If I were you, I would just delete all purchased apps (if you've purchased music, that's a whole different issue - but you could probably simplify your music purchases, too) from all devices accept one - your most "important" device - and log out from all other devices. Then log in from those other devices using your preferred Apple ID, and reinstall the apps and other stuff.
It's going to be tedious, and it'll take some time, but I think you'll have a much better experience over the long term.
For one thing, you'd always be notified automatically to update/upgrade your stuff, and your log-ins to do so would be much easier.
I know it's not good news, but I hope it helps.

One of my bookmarks i cant get into using the user name and password alli get is the page timed out but i can get into the site by using internet explorer

When I try to get in the site all I get is session is timed out. How can i correct this

Try to navigate to that page starting with its home page in case you are using a bookmark.
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

Can I use user names and password of Microsoft Office Outlook for hyperion

I'm new to Hyperion. Can anyone tell that can I use "user names" and "passwords" of Microsoft Office Outlook for login into hyperion applications.
I'm not talking about single sign on, but want to use same user names and passwords as that in Outlook.
ANy suggestions?

That depends on how your Outlook authentication is configured.
Hyperion is generally configured to authenticate against a network directory (NTLM, MSAD or LDAP). I'm not an Outlook expert, but my Outlook user ID and password is almost always my MSAD id and password (I change clients regularly, and it's almost always the same situation). So it's also usually the same as my Hyperion ID and password.
Ask your Outlook administrator whether it uses (or syncs with) MSAD, NTLM or LDAP. If the answer is yes, then you're in good shape because Hyperion can use these as well.
Hope this helps,
- Jake

Problems with invalid user name and password

We have a one week old MacBook 2.2GHz basic white model that is generally working well.
However a problem has now arisen whereby on any attempt to shutdown or restart it won't accept the administrator user name and password, returning an 'invalid' warning. The issue seems to be the user name as the administrator password has worked OK in other situations. Naturally I have checked and re-checked the user name (which was in the form (first name followed by surname in upper and lower case) and it was OK (in any case it was being prompted automatically by the system.)
I have subsequently changed the administrator name (to the form first name only in upper and lower) and the password as suggested by the following article:
http://docs.info.apple.com/article.html?artnum=306876
Nothing has changed. Can anyone help?

HI Martin, a late post to confirm the solution from the last post by using the "RETURN" key works..
(mouse click worked ok in Tiger 10.4.x I thought).
Tis was a delight and so obvious after seeing these symptoms.
I have posted this entry in case anyone else get's into this situation since OSX LEopard 10.5. Several people have encountered this issue where they may have:
• LEopard 10.5.x installed
• have 2 or more active users LOGGED into the OSX system via fast user / fastuser switching
• request a SHUTDOWN or RESTART from an user
• get a OSX request to supply administrator attributed user and it's associated password to validate SHUTDOWN | RESTART request,
• have admin | root account verification failure of password after 'clicking'.
After some months of frustration, it seems a simple PRESS of the "RETURN key" works!
Simply, DON'T mouse click after entering admin user/password.... instead press "RETURN" key.
fwiw.
w

Logging into portal with r3 user id and password.

I need to login to a portal using R3 user ID and password.
It would be really helpful if anyone could provide me with the steps involved in it.

Yes it is ABAP System Tab and not ABAP Server Tab.
Before going to the ABAP System Tab, Select ABAP System from the dropdown(in Data Source Tab) and then you should be able to enter ECC Server Details.
I hope you created SAPJSF as suggested in the help link and attaced the required ABAP roles to the user.
Also Ensure to test with Test Connection button to be succesful.
If error persists,Please post the errror details
Edited by: Santhosh Edla on Feb 24, 2009 4:34 PM

I am trying to use Find My Phone for people to follow me on the NYC Marathon next week. Is there a way to set up a temporary User ID and Password to give out to people for this purpose? I would obviously want to delete that log in info after the race.

I would like to use Find My Phone for friends and family to follow me during the NYC Marathon next week. Is there a way to set up or temporarily change my User ID and Password for this purpose?

New York Runners has an app that is specially designed to do exactly that. It's (or will be) available in the App Store.
http://www.nytimes.com/2011/10/27/sports/for-new-york-city-marathons-fans-a-cell phone-app-to-keep-in-touch.html?ref=technology
You might also look at apps like RunMeter. It will let you send updates by email, Facebook or Twitter. Glympse is another app that, though not designed specifically for runners, might also be useful.

I use a program called RoboForm2Go that will fill in user names and passwords for me when I open a site and now that option is not available in the taskbar at the top. How can I use that feature again?

I save the RoboForm2Go program on a flash drive and when I opened a site that I had saved the user name and password, the RoboForm2Go would show up in the taskbar with the site I opened so I could just click on it and it would automatically fill in the info for me.

Under View>/toolbars, I don't have an option to choose RoboForm Toolbar. When I initially set up the program, I was using Internet Explorer and I can go to the taskbar at the bottom and choose RoboForm but then whatever site I was opening in Firefox will now open in Internet Explorer instead of Firefox. The old version of Firefox would display the RoboForm toolbar at the top.

I tried to share a photo using e-mail and when I set up my gmail account I typed in the wrong user name and password. Now i can't share photos using e-mail.

I tried to share a photo using e-mail and when i set up my gmail account I typed in the wrong user name and password.
Now I can't send a photo because i get an error message saying the user name and password do not match.
How do i save a new gmail user name and password??

iPhoto Menu ->
Preferences ->
Accounts ->
Delete and recreate your email settings.
Alternatively, use Apple's Mail for the job. It has Templates too - and more of them.

SSO using user ID and password

Hi ,
I have installed EP 6.0 SP2 running on SQL DB,Business Package for ESS for SAP R3 4.7 , ITS6.20.
Portal is runing fine and i also have set up the SSO with R3 using UIDPWD. I can able to access ESS iviews. Everything runs fine.
But the problem is that after accessing 6/7 iviews of ESS, i am prompted for User id and Password. ( Welcome screen is displayed). I have checked the no of session in SAP R/3 ( Transaction : SM04) there are 4/5 RFC session found.
Please do let me know if any other information i have missed out. Any idea always appriciated.
Regards
Debaraj

Hi Tan
Thanks for the reply.
I have already set the Logon Ticket expiration = 24 hr.
But still i am having the same problem .
About the second option you have mentioned
I have not changes iViews priority nor authorization scheme priority.
As i mentioed , i could able to access iViews but after accessing 6/7 iviews i am getting portal login screen. This screen came even i click on the portal welcome page too.
Please do let me know if any other setting need to be maintained . Is there any setting need to be done in ITS side.
Regards
Sahoo
Message was edited by: Debaraj Sahoo

HT4314 I have tried to log into clash of clans on my iPad and it just keeps going to a new game rather than the one saved on my iPhone. I have been using the game centre and same user name and password ?

I have tried to log into clash of clans on my iPad and it just keeps going to a new game rather than the one saved on my iPhone. I have been using the game centre and same user name and password ?

I have the same problem.. EXACTLY. . When phoning Apple Support they had trouble understanding my problem and couldnt find any type of solution. No one seems to take responsibility for GameCenter issues. The assistant escalated the problem but no one could find an answer. .
The only idea was to set up a new apple id, hence a new GameCenter account. . But that would loose all the itunes data. Anyone got ideas ?

"Use my Microsoft Windows user ID and password" is grayed out

Hello Experts,
I've disabled "SOX Auditing" option in Server Manager in BPC 5.1 SP03, but "Use my Microsoft Windows user ID and password" is still grayed out. The only option I unlocked is saving password.
How do I enable Windows Authentication in BPC?
Thanks in advance,
Akim

Enabling/Disabling SOX Compliance does not take effect until the 2nd time you go through the Connection Wizard.
Your problem could also be within Internet Explorer.
Go to:
1. Internet Explorer>Tools>Internet Options>Security Tab
2. Click on Local Intranet zone>Custom Level
3. Scroll down to User Authentication>Logon. Ensure that Automatic Logon with Current UN and PW is checked.
4. Do the same for the Internet zone.
Try on multiple machines.
Also on the client machine, look at the value for BASICAUTHENTICATION in:
hkeycurrentuser>software>vb and vba program settings>outlooksoft 5>latest

Initially stating No authorization required using Adobe. When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer. What gives?

When I set up Adobe reader on my computer to be able to download books from a library and then transfer to my Nook e-reader, I initially stating No authorization required using Adobe. When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer. What gives?

This is pretty surprising and wierd that even Reader 10.1.1 is crashing on your system. It works pefectly for me.
Would it be possible for you to get the crash dump, and upload it, so that I can have a look at the same.
Download PROCDUMP from <http://technet.microsoft.com/en-us/sysinternals/dd996900.aspx> and extract it to a folder, say, c:\temp\procdump.exe
Open cmd prompt and type "cd c:\temp".
Launch the browser and open the PDF.
Open task manager, sort processed by name. Two AcroRd32.exe instances should have been launched. Note the PID (a small integer like 5588) corresponding to the AcroRd32.exe with the higher memory usage; this is the process that must be crashing. Note this PID.
On the cmd window, type "procdump -e -ma 5588 c:\temp\01.dmp" (replace 5588 with the actual PID of the process noted in Step 4). Procdump will now wait for the aoolication to crash. If it throws a EULA, accept it.
Perform your steps to cause the crash.
Procdump will have created a dump file at "c:\temp\01.dmp". Zip it up (since it will be 100s of MBs otherwise) and share with me.
Thanks in advance for all your help
Ankit

Appplications using "Administrator" user id and password in J2EE engine...

Similar Messages

Maybe you are looking for