Appraisal Document Selection - HAP_MAIN_DOCUMENT / RABAX_STATE error

When selecting the appraisal document within the MSS view or ESS view the following error message comes up.
Error when processing your request
The URL http://saperpdev.sw.schwans.net:8080/sap/bc/webdynpro/sap/hap_main_document was not called due to an error.
The following error text was processed in the system SC1 : Error in ABAP/4 statement when processing an internal table. table.
The termination type was: RABAX_STATE
Thanks for your time.
Edited by: Mary Jo Wartner on Mar 19, 2010 6:04 PM

The config for the tab order was wiped out in the IMG. Need the checkmarks replaced for what levels to display as tabs.

Similar Messages

Error on Flexible Performance Management Appraisal Document

Hello Experts,
We are in the process of building Performance Management using Enhancement Package 4 in ECC 6.0. I am having issues with getting the Appraisal Document to work for MSS. Just to clarify too, I have no experience with Performance Management and the fact that we are using Enhancement package 4, our Functional consultants are not sure what to expect either. One more thing, the SICF service is activated.
*) When trying to preview the Appraisal Document (com.sap.pct.erp.mss.hap_document), I am receiving a Portal Run Time error.
*) When I go into SE80, I am using Package u2018PAOC_HAP_DOCUMENT_WD_UIu2019 to run a test on Web Dynpro Application HAP_MAIN_DOCUMENT, I am receiving u2018Access via 'NULL' object reference not possible.u2019
*) When I go into SE80, I am using Package u2018PAOC_HAP_DOCUMENT_WD_UIu2019 to run a test on Web Dynpro Configuration HAP_AC_MAIN_DOC, I am receiving u201Cu2018Error in Calling Up Applicationu2019 The Web Dynpro application was called up with the wrong URL parametersu201D.
QUESTIONS:
1) Do I have to implement Generic Performance Management (com.sap.pct.erp.mss.14.generic_performance_management) to call the appraisal document?
2) Is there any special configuration that needs to be done to make the HAP_MAIN_DOC work (portal or R/3)?
3) Do I need to manually create an SICF service for this?
4) Is there any documentation on how to implement the Flexible?
Any direction would be appreciated.
Thank you,
Mike

Hello H2R,
I copied the Iview Generic Performance Management (com.sap.pct.erp.mss.14.generic_performance_management) with Application Name 'HAP_START_PAGE_POWL_UI_MSS' and the Application Configuration Name 'HAP_START_PG_POW_MSS_AC'.
Activated the SICF services of 'hap_main_document', 'HAP_START_PG_POW_MSS_AC', 'HAP_START_PAGE_POWL_UI_MSS. Also, I would activate the services that begin with 'HAP' that l thought that I would need.
In SE80, there are 2 locations to find these Applications: 1) Web Dynpro Comp./Intf. = FPM_OIF_COMPONENT and 2) Package = PAOC_HAP_DOCUMENT_WD_UI.
As for the notes, we are on SAPK-60420INEAHRGXX, these are the notes that we applied:
1468466 - PM Launchpad Config
1463821 - PM Portal Config
1416756 - OBN Config in PM
1408243 - Config for OBN
Hope this helps,
Mike

Appraisal Document Error "Document not found"

Hi All,
I have created iVIew MSS Appraisal Document with following details
Technical Name of iView   :   com.sap.pct.erp.mss.hap_document
Technical Name of Application :   HAP_MAIN_DOCUMENT with application parameter Mode=D
Runtime Technology   : ABAP/Web Dynpro
Help URL : [http://help.sap.com/erp2005_ehp_04/helpdata/en/6f/c2cfcd65164677ba4179718188f75e/frameset.htm]
While accessing "Appraisal Doucment" from Portal getting "Docuemnt Not found" error.
If I will click on Adapt Configuration button in the view getting "Access via 'NULL' object reference not possible" error.
Thanks in Advance,
Risha

Hello Risha,
If you've applied the note 1416756 , you probably already have the ESS and MSS Business Package 1.41.
First off, have you got the standard iViews to work from the standard ESS portal role before creating you own iViews?
On your Portal Content Admin tab, navigate to Content Provided by SAP->End User Content->Employee Self-Service->ERP 6.0 EHP4->Pages->Career and Job
You will see 2 pages called Appraisal Document and other two called Appraisal Documents (WD_UI) and Appraisal documents (Predefined Process). Since you are trying to use hap_main_document, I assume you are trying to get the Flexible Template iViews working.
The Pages you will want to reuse/copy are Appraisal Documents (WD_UI) and Appraisal Document with the PCD ID ending with documents_ee.'Appraisal Documents (WD_UI)' is your starting point and 'Appraisal Document' is your target page on clicking on an individual document. If you check the properties of the iViews included in these pages, the ECC applications used will make more sense. (Notice the OBN within the WD_UI page under the page properties. The OBN operation used should show up here If you want to add your own, navigate to Portal Content-> Business Objects->ERP->HR . Locate the operation you want to use and add it to this perspective in your custom page) .
So create some docs using 'phap_prepare' . Launch the Appraisal Documents (WD_UI) page and click on the doc you've created. The target Page will be launched . What you have been trying to do all along (I think) is launch the target page independently without any inputs.
Good luck
Pooja

Has anybody found a fix to The document could not be printed and There were no pages selected to print error

Has anybody found a fix to "The document could not be printed" and "There were no pages selected to print" error?
I am using a Mac and I'm running the latest versions of OS X 10.6.8 and Adobe 11.0.10 but I'm unable to print. I need REAL HELP not a suggestion or a get around! and NO print as an image doesn't work, nor do I see that as a fix!
Please help!

Hello PW, I am having this problem and all suggestions haven't worked yet. Where is the Preferences|Documents you are referring to? I am on a PC and using Windows.
EDIT: I found it and did, but still not working.

Performance Management (Appraisal Documents) ABAP webdynpro error on HTTPS

Hello all,
Please help , in resolving the issue with Performance Management Application "Appraisal Documents" getting Blanks Screen on the routing back from "Appraisal Document" after user close the application. Issue is only applicable in 'HTTPs' and work fine in internal network.
On HTTP Watch : "ERROR_HTTP_INVALID_SERVER_RESPONSE" in the trace.
Steps to replicate :
1. User click on the "Appraisal Documents" link on the Area page and open the application on the new window.
2. User select one of the "Appraisal document" from the list available to work on it , which result in another window.
3. User close the application after finishing the work on the "Appraisal Document" and return on the Parent window "Appraisal Documents".
4. At this point "Appraisal Documents " window get refresh and every things looks great.
5. Now if user want to select another appraisal document to work on it in "Appraisal documents" window, it freeze or give blank screen.
Thanks in advance.

Hello surya,
is the problem solved?
Best regards Oliver

General error, document selection /BEV2/EDMESS1000

hi all,
after we 've activated document splitting func. with new gl, we'are getting that error "General error, document selection, etc.
no. /BEV2/EDMESS1000" in f-02, f-36 etc. kindly need your help
thanks

Great that ur problem is solved.
It is always better to post your resolution also. so that it can be helpful for others in future.
Br,Vivek

ESS Appraisal Document Adobe Print Error

Hi,
we are in the midst of upgrading our system from 4.7 to ECC6. We have noticed that once upgraded, we are getting error when we try to print the performance management document. In Portal, once we clicked on the appraisal document, we click on the print function. Next, we click on 'open'. we get the following message:-
"Adobe reader could not open webforms.pdf because it is either not a supported filetype or because the file has been damaged"
Any idea why? Is it an Acrobat issue rather then a SAP issue?
Thanks

Hi,
Check the details .....
Check the ADS connection "SM59".....with Basis People
Also check the ADOBI Version that you have using ....
The Acrobat version should be latest one.

Appraisal Document Error in ERP6 EHP6 and Portal 7.3

Dear All,
I am on ECC6 EHP6 and Portal 7.3 and using WDA ESS and MSS business packages. I have gone through all the below notes:
1600380 - Appraisal Document does not open in portal
1468466 Performance Management Launchpad Configuration
1463821 Performance Management Portal Configuration
1416756 OBN Configuration in Performance Management
1408243 Configuration for object-based navigation
But since I an using Webdynpro ABAP package for ESS I dont have the below path in Portal:
portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.14.bp_folder/com.sap.pct.erp.ess.14.pages/com.sap.pct.erp.ess.14.career_job
I am getting the attached error while accessing Appraisal Document in Portal. Also when checked in SE80 its giving the same error.
Kindly help.
Thank you,
Regards,
Disha.

Hello disha,
This issue (Error in Calling Up Application) is a common issue and SAP Note 1600380 was created to address this.
1) Keep in mind your custom environment, please pay attention to the following comment in the Note:
"Note: this document has been created based on standard ESS and MSS roles. If you have copied the standard content to customer specific roles you will have to adapt them accordingly."
2) Remember to test each role independently, this is because OBN will resolve with the first available navigation found:
"Recommendations: in order to set up the navigation it is better that you first solve it independently for each role. So first just assign the ESS role to your user and Content Administration role. Once it is working, proceed with MSS role (in that case remove ESS role and
assign MSS plus Content Admin)."
3) After checking all the customizing, please pay special attention to the "further checks" section:
   3.1)
   "Check note 1352104 - OBN action's Business Parameters don't reach AI' is implemented. This note corrects an issue with parameters not correctly passed in POST."
   In order to check this, go through your ComponentInfo Page and check the version of your EP-PSERV component. For instance:
EP-PSERV 7.01 SP3 (1000.7.01.3.1.20090302142421)
This is the patch level:        ^
So, in this case you would have:
EP-PSERV: 7.01
SP: 3
Patch level: 1
The problem for the non-working OBN link, could be a mixed protoco between the portal and the WDA backend system (WebAs). The Object Based Navigation framework, among other things, is based on Java Script, hence it needs that the portal and backend will have the same protocol and the same domain. Please check note 945516 - Web Dynpro ABA in a portal environment.

Error in calling up application Appraisal document

Good Morning.
We are implementing Appraisals for ESS and MSS with BP 1.41. We are
working ECC 604.
We are following the information of help.sap for configure this component.
We did the following setting in the customizing.
1.      In Customizing, choose Cross-Application Components ® Homepage
Framework ® Areas ® Services ® Assign Services to Subareas.
       2.      Delete the following:
○       Subarea key EMPLOYEE_CAREER_SUB_TM_PM_14
○       Service key EMPLOYEE_CAREER_APPRAISAL_PMP_14
○       Item 10
       3.      Add the following:
○       Subarea key EMPLOYEE_CAREER_SUB_TM_PM_14
○       Service key EMPLOYEE_CAREER_APPRAISAL_WD_UI_14
○       Item 10
After completing these steps, the Employee portal role is actively
assigned to the Appraisal Documents iView
(com.sap.pct.erp.ess.14.documents_ee) in the Job and Career area.
Other activity that we did was active the WD ABAP using the T.Code SICF.
However the system is display the following message of error that attach.
[Step One|http://www.freeimagehosting.net/uploads/8bfb44c773.jpg[/img]
[Steps two|http://www.freeimagehosting.net/uploads/5ab82e17e5.jpg[/img]
We have not made any parameterization in the portal.
We want know What is cause of this error?
Kind Regards.

close this duplicate

Appraisal document error " Weighting cannot be 0.00 "

My client requirement is to store appraisal document with induvidual performance objectives even with zero (0.00) weighting. But on processing (saving/navigating to next status), standard business check " FM HRHAP_BC_DOC_BODY " is called which checks for " Weighting can't be 0,00 "... Is there a way to skip this...
(Note - the default weighting for each of the five induvidual objectives is assigned as 20. On going into the document and on chaning this weighting for any one or for more than one weighting to zero, this standard check is performed)
Suitable answers / suggestions would be rewarded....
Edited by: Karthik S Kumar on Jul 23, 2008 4:30 PM

Hi,
Weighting 0 is not posible. But you can maintain during the configuartion that weighting should not be taken into account (right mouse on VB or VA and the Sorting&Weighting). In the background it still would be filled with 1 but it is not being processed.
Besides that there is just no way to set FWGT to zero.
You can as a workaround not use FWGT. Use a custom own column to do weighting. a customer own column does not have any specific restrictions like FWGT. That should do the trick, however some standard SAP badi implementations do require FWGT. If you use any of those you might also copy the implementation and replace FWGT with your custom own column ID.
Regards and Groetjes,
Maurice Hagen

Shortdump while accessing Appraisal document in portal-Null obj ref.not pos

Hi all,
We are implementing Performance Management in Ehp4 with EP 7.1, flexible template   We have been facing an issue where in Portal while we are trying to click on Appraisal document either in ESS or MSS, it dos not open anything instead we are getting
short dump error in ST22. We have performed the portal and ESS setup as per the SAP recommended notes.
1272076 - Appraisal Nav
1408243 - OBN
1416756 - OBN Confi
1463821 - Portal confi
1458466 - Launchpad config
The short dump error analysis as follows.
Short text
    Access via 'NULL' object reference not possible.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
   caught in
procedure "READ_ATTR_ALL_FOR_CASETYP" "(METHOD)", nor was it propagated by a
   RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "LO_CASE_CUST").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
Just wondering if any one of you came across this issue. I have put external break point at main appraisal component
HAP_MAIN_DOCUMENT and class CL_HAP_WD_DOCUMENT_UI. But it didn't go through. I think because this abap dynpro not being called due to url issue and thus dump says null pointer exception.
Appreciate your response and I Look forward your insights.
Prav

<< Do not post the same question across a number of forums >>

Ref: No Valid Appraisal Documents in ECM (Hight Priority)

Hi Team,
I have did complete IMG activity for ECM as per client specifications.
According to that I have created Budgets (by Using BSP's). Now, When I loged as MSS user and selecting the Review of mine. I am getting an error saying that "Error occurred in data reading"...
I am able to make changes by using Standard Plan "Spot Bonus". So I have made one Compensation Plan Item with Spot Bonus Review and other respective customization. Now I am able to see my Direct Reporting Employees..
But I am getting an error as "MERIT-CH (i.e., My Comp Plan) has no valid Appraisal documents.."
Any Help is Highly appreciated...
Thanks in advance.. Kindly forward me if u have any knowledge on ECM...
Sudhir.N
Consultant - SAP HR

>>>"No Active Implementation is for matrix dimension method"..
I think it has do with applying the guidelines.. have you implemented the BAdI 'HRECM00_MATRIX_SEGM'?
~Suresh

Other Users need access to Appraisal Documents in OSA

Hi,
We are implementing Objective Setting and Appraisals and have found that when a user logs into the Portal, they are only able to enter Appraisal documents where they are the Appraisee or Appraiser.
We have the need to allow other users to enter Appraisal documents, for example, the Next Higher Supervisor. When they log into the Portal, they can see all their subordinates, but it looks like no one has an appraisal document, when in fact, they do.
What do we need to change to allow these extra users to be able to see that appraisal documents do exist so that they can select them?
Any help is appreciated.
Thanks,
Mary Ann Kolnik

Hi Rachel,
Hopefully I will answer your questions.
We currently have a custom implementation of the column owner badi because we found that the choices delivered (AE-for appraisee only, AR-for appraiser only, etc.) were not enough for us. We determined that our requirements for column access needed an owner of the appraisee sometimes and an owner of appraiser sometimes and possibly even other participants (like a Power User, Delegate, etc.). So, right now we created an AL choice for 'All Users' and then in the column owner method check_column_owner, we have code to see if 'myself' is the appraisee, the appraiser, or a further participant.
If he's the appraisee, we pass an 'E' in the export parameter column_owner. If he's the appraiser, we pass an 'R', and so forth.
Then we have these values in our custom zcol_access table. This is so that the column access badi can pull the column availability from zcol_access for the particular column_owner per column/status/substatus. This allows for columns to be hidden, display only, or changeable for particular people at particular status/substatuses. We do have the template field also in the zcol_access table so you could separate the column access per template also.
I hope this makes sense. It is working for us so far, now the issue is how to get the further participants to be able to enter the correct set of appraisals and get the right columns and custom pushbuttons. We would like to use the hrhap_others table, because it works well with our column owner and column access design, but our further participants can change their roles often, so we don't want them permanently tied to an appraisal. More research and trial and error needed.
Mary Ann

No valid appraisal document found 00000429

We have Appraisal & ECM configured. Appraisal documents are also created.
In MSS when I try to do compensation planning, I get the following error - 'No valid appraisal document found 00000429'.
Can anyone help in this regard?
Is it because the various dates in ECM i.e. Key date, Effective date etc are not in sync with the Appraisal period or anything?

I am trying to do an Annual review. The status of appraisal for the selected employee was completed. I approved it and therefore the status changed to Approved. Now the earlier error i.e. - No valid appraisal document found is gone.
Instead I am getting the following errors now:
(1) Salary Adjustment (Merit) (T): Jordan Micheal does not have a salary structure acc. to basic pay record on 01/01/2010 (00000972)
(2) Salary Adjustment (Merit) (T): Error calculating compa-ratio of Jordan Micheal on 01/01/2010 (00000972)
Note:
In ECM config, we are using MBO appraisal and compa-ratio matrix.
Edited by: VS on Nov 23, 2010 12:15 PM
Edited by: VS on Nov 23, 2010 12:21 PM

ESS EHP5: Appraisal document not working

Hi,
I am implementing performance appraisal (EHP5 and BP ESS 1.50) and am sorting out the very confusing scenario of EHP4 and EHP5 versions of appraisal documents. I am using the pmp version EHP5 and BP ESS 1.50 (BP ESS 1.41 not installed). I did basic setting in Object Setting and Apprsaisals (repla = X) and created a category and a basic template (Do I need to do this if I use the predefined version?).
But when I run the iViews, I got a system dump from the pmp version ...
Access via 'NULL' object reference not possible
Error Code: ICF-IE-http .....RABAX_STATE -e: OBJECTS_OBJREF_NOT_ASSIGNED_NO
I checked sap note 1319829 but our basis guy said we are ok with sap basis level (level 7)
... and this error from the flexible version:
The Web Dynpro application was called up with the wrong URL parameters
I checked some related notes about OBN configuration but they are only for EHP4. I've very little about EHP5. And from what i found, the EHP5 PMP version already takes care of OBN configuration in the iviews and launchpads.
BF and extension sets are all on as far as I can see.
My questions are: is BP ESS 1.4 needed to run appraisal for EHP5? Is Object setting configuration needed for EHP5 (predefined) which is abap based, since whe I tried the template (web layout), it shows BSP sicf bsp services not activated.
Thanks

Hi Luke
May i request your help on below issue (I hav already raised a thread with heading "Infotype 24 - Appraisal Document not visible for Appraisee - Urgent"
I have following scenario in PMS (not using Talent Management)
I am using Flexible PMS (Objective setting & Appraisals) with setting " HAP00 REPLA as A".
HR is triggering the template through PHAP_CREATE giving Appraisee, Appraiser and Reviewer.
After that, i am logging in through Appraisee id in the ECC and trying to see the document in Infotype 0024, tab (Appraisal where Appraisee / Appraiser)
but i am not able to see the document however i am able to see the document for Appraiser in Infotype 0024, tab (Appraisal where Appraiser) when logging in through appraisers id in ECC
May i request your expert opinion regarding the above mentioned issue.
Note: Status Flow in Appraisal Template is correctly defined.
Rgds
AJ

Appraisal Document Selection - HAP_MAIN_DOCUMENT / RABAX_STATE error

Similar Messages

Maybe you are looking for