Appraisal Document Sub_status in PHAP_ADMIN_PA

We are using two substatuses in our appraisal template. When using transaction PHAP_ADMIN_PA to change the status on a document, no sub_statuses are displaying with the drop-down for selection. They are entered in table T77hap_sstatus, however there is no input help defined for sub_status.
Has anyone else had this problem? Any help would be appreciated.
Thank-you.
Edited by: Carol Badr on Oct 7, 2008 8:19 PM
Forwarded problem to SAP - They believe this is a bug introduced with another note and are working on a correction.

SAP is providing a correction.

Similar Messages

  • How to trigger follow up processing actions in appraisal documents?

    Hi gurus,
    We are customizing the performance management process using Objective Settings and Appraisals (ECC 6.0; Enh.Pack 4, ESS/MSS with business pack 1.41) and we have customized the evaluation templates (transaction PHAP_CATALOG_PA) with the enhancement "Follow-Up Proc. (Background) - Adjust Qualific. (Start Date)" in Follow-up Processing section of the Processing tab, at template level (VA object).
    The system functions is ok, and the cualification appears in the employee profile (transaction PPPM) correctly after the performance management especialist trigger it using the admin report (transaction PHAP_ADMIN_PA).
    My question is: Is there anyway to automatically trigger the follow-up processing after the appraisal document is finished? Do we need to develop in ABAP a new implementation of some BADI?
    Thanks in advance!

    Maurice Hagen wrote:
    Followup processes are started as soon as the document goes from status 1-4 to 5 (completed).
    Do you mean ALL available follow-up processes should be started as soon as status is set to "competed"?
    That's not what happens for our (custom) appraisal: follow-up process(es) are not started when the status becomes "completed", neither from the backend nor the portal. We always have to manually launch the follow-up process from the phap_admin transaction, and select the ones we want to be done.
    In phap_catalog, we have a couple of follow-up processes that are selected in the "Processing" tab.
    when the approval process is activated (infty 5025) and or status 6,7,8,9 are selected then the follow up process only takes place after status change to close approved.
    Even when setting the status to "closed approved", no follow-up process is started.
    Any suggestion? Isn't there a setting somewhere that should be set in order for the follow-up prpcesses to be automatically started when the status is set to "completed"?

  • Doubt with Appraisal Document

    Dear Experts.
    I am implementing Appraisal Document for ESS, but I need know if Appraisal Document that appear in the Portal ESS/MSS are the right but in the Backend. This for check if the information showed in the Portal ESS/MSS is the right.?
    Thanks in advance.
    Regards

    yes this can be configured in the backend using PHAP_CREATE_PA      
    and other ones are
    PHAP_ADMIN           Administrator - Appraisal Document
    PHAP_ADMIN_PA        PA: Administrator - Appr. Document
    PHAP_ANON            Appraisal Documents - Anonymous
    PHAP_CATALOG         Appraisal Template Catalog
    PHAP_CATALOG_PA      PA: Catalog for Appraisal Templates
    PHAP_CHANGE          Change Appraisal Document
    PHAP_CHANGE_PA       PA: Change Appraisal Document
    PHAP_CORP_GOALS      Co. Goals & Core Value Maintenance
    PHAP_CREATE          Create Appraisal
    PHAP_CREATE_PA       PA: Create Appraisal Document
    PHAP_PMP_OVERVIEW    Start PMP Process Overview
    PHAP_PMP_TIMELINE    Maintain Process Timeline
    PHAP_PREPARE         Prepare Appraisal Documents
    PHAP_PREPARE_PA      PA: Prepare Appraisal Documents
    PHAP_SEARCH          Evaluate Appraisal Document
    PHAP_SEARCH_PA       PA: Evaluate Appraisal Document
    PHAP_START_BSP       Generate Internet Addresses
    PHAP_TEAM_GOALS      Maintaining Team Goals

  • Is it possible to lock an appraisal document?

    Hi,
    One of the client requirement is to lock the incomplete appraisal document from editing. Is there a function available to lock the document from editing? Does any one know how to do it?.
    Many thanks,
    Terence

    >
    Dilek Adak wrote:
    > Hi Terence,
    >
    > There is no option to lock the appraisal document, but there is an unlock option instead (PHAP_ADMIN_PA - Goto Locked appraisal docs - Unlock).
    > To lock an appraisal document from editing, one option may be going to PHAP_ADMIN_PA t-code and opening the document with change button -so that no one can open and change the document unless it is closed-.
    > Not a sophisticated way but would probably work in your case.
    >
    > Regards,
    >
    > Dilek
    Hi Terence,
    I think you are looking for a more permanent lock on the document.
    What you can do is make sure you have a status or sub-status configured for the appraisal template.  This is configured on the status_flow tab.   
    For this custom status you would make sure the Person Authorized is some Role other than the appraiser / appraisee.  You can configure a custom role. 
    You would basically jerry-rig the template so that when the document is moved into that sub-status neither the appraiser / appraisee can move the document forward or backward, and you make the document have a read-only status.
    Than to make this work, when the documents are live, a performance management adminstrator can go into phap_admin and manually mass move all the document status to the limbo status you configured.  Once you want to unlock it again, the adminstrators would move it back to a document status that then gives the appraisee or appraiser control on the document.
    hope this helps, let me know if you like the idea.

  • Extending Validity Period In Assigned Appraisal Documents ???

    Dear Experts,
    Appraisal Documents is assigned to Employee via Appcreate, where we have provided some validity period and Execution period of Documents .
    Now requirement is to extend END Date of Validity and execution period .
    For Ex :
    Start date : 01.01.2014
    End Date : 31.06.2014
    Now Appraisal Period is over and appraisal document is freezed .
    Is there any way We can Extend that Appraisal Period from 31.06.2014 to 31.08.2014  ???
    I was trying PHAP_ADMIN_PA, where we can click on CHANGE HEADER DATES and can change Dates and other fields but that is possible before Ending of Appraisal Document .
    Now I am getting Error : latest appraisal date must occur after the current date .
    Is this Possible to do ?
    Is there any table or configuration or enhancements where we can Extend Dates of Freezed Appraisal Documents ?? 
    Its a needful thing to do..
    Please help me out for way forward .
    Regards,
    Pran

    Hi Pran,
    Yes, your request can be done by PHAP_ADMIN_PA (not by PHAP_CHANGE, as was suggested here).
    The reason you got that error message is that you have tried to set the execution end-date earlier than the current date, and that makes no sense.
    As you may know, the execution period determines the period in which the appraisers will be able to enter the appraisal document the perform the appraisal (edit the document). if you set it to a period in the past, what will you gain by doing it?
    Just fix the execution period.
    Regards,
    Liran

  • Previous Appraisal Document

    Hi all,
        We have implemented OSA Appraisal system using ECC5.0 last year, with loads of templates.
    For this years Appraisal cycle, we r getting a requirement to view the previous appraisal document (from a link in current document).
       I know that implementing the BADI -HRHAP00_LINK, will help in this.
    But for this, am having to create new Templates,  since the last year's templates could not be changed as it has documents created.
    I want to know.
    - Is it a good practice to create templates often?
    - Is there any option to delimit the old templates (to make it invalid from this year).
    - IS THERE ANY OTHER ALTERNATIVES TO BRING "LAST DOCUMENT" ?
    Message was edited by:
            Anbarasan K

    Hello,
    1. You should go to the tcode: PHAP_ADMIN_PA.
    Select the appraisal document that need to be deleted and
    Click on the delete button on the top of the page.
    2. Regarding Offline appraisals, you have to pass a parameter OFFLINE_AVAILABLE=X  in the iViews that connect to the BSP page documents_received_open2.htm  from ESS.
    You also have to specify the Offline layout = Standard in the template configuration and under the layout tab.
    Regards
    Raghu Kolukuluri

  • How to change Font size and alignment in Appraisal document - Font settings

    Dear Eperts,
    We are working on 360 Appraisal. Can Any body explain how to change the fornt size and allignment (text wrapping to wndow size) in Appraisal document.
    Thanks and Regards,
    Ajaykumar

    Hello Ajaykumar,
    if I am not completely mistaking the 360° Appraisal uses the Adobe Forms.
    In this case the font can be set in the Adobe Live Cycle Designer by selecting "Palettes" -> "Font".
    Here is a discussion which addresses this question, and also contains a link to how to handle Adobe Forms:
    Adobe Print Form - Change Font Type/Size | SCN
    Best regards,
    Laszlo

  • BADI for changing Appraisal document application name for Web dynpro ABAP

    Hi,
    For Appraisal document customizing through PHAP_CATALOG_PA, We have BADI HRHAP00_BSP_TMPL  to change the BSP application name which can be used in Web layout for output display. Using this we can change application name from HAP_DOCUMENT to custom BSP application name
    Similarly, what is the BADI for changing Web dynpro ABAP applictaion name? Currently its triggering HAP_MAIN_DOCUMENT.
    how do we change application name to some custom web dynpro application name
    Regards,
    Kothand

    Hi Karim,
    I don't know, if there is any chance to get the Webdynpro application name. At least in the ABAP System fields is no information about the webdynpro application name.
    One remark: I have allways problems with BAPIS / BADIS that behave different depending on the caller. Could it be a good idea to pass some information through the interface / parameters?
    Best regards
    Renald

  • The note field is in non-editable mode in appraisal document

    Hi all,
    In appraisal document,
    the reviewer can give his comment in the status u201CIn Processu201D and in the Sub Status u201CAnnual Review by Addl Managers/Reviewersu201D in an appraisal document. It is editable when I am trying via web but when I try to upload the comment from backend GUI  ( using phap_admin) the note field is in non-editable mode. My client requires it in editable mode at the back end.
    Can any one help me on thisu2026

    Hello Girish,
    Can you please check the appraisal  template, Proper access has been given to use the note column. If still faces problem can look for the BADI  HRHAP00_COL_ACCESS.
    You can look for the following notes also :
    1554467   column access does not work
    Best Regards,
    Deepak..

  • Shortdump while accessing Appraisal document in portal-Null obj ref.not pos

    Hi all,
    We are implementing Performance Management in Ehp4 with EP 7.1, flexible template   We have been facing an issue where in Portal while we are trying to click on Appraisal document either in ESS or MSS, it dos not open anything instead we are getting
    short dump error in ST22.  We have performed the portal and ESS setup as per the SAP recommended  notes.
    1272076 - Appraisal Nav
    1408243 - OBN
    1416756 - OBN Confi
    1463821 - Portal confi
    1458466 - Launchpad config
    The short dump error analysis as follows.
    Short text
        Access via 'NULL' object reference not possible.
      An exception occurred that is explained in detail below.
      The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
       caught in
      procedure "READ_ATTR_ALL_FOR_CASETYP" "(METHOD)", nor was it propagated by a
       RAISING clause.
      Since the caller of the procedure could not have anticipated that the
      exception would occur, the current program is terminated.
      The reason for the exception is:
      You attempted to use a 'NULL' object reference (points to 'nothing')
      access a component (variable: "LO_CASE_CUST").
      An object reference must point to an object (an instance of a class)
      before it can be used to access components.
      Either the reference was never set or it was set to 'NULL' using the
      CLEAR statement.
    Just wondering if any one of you came across this issue.  I have put external break point at  main appraisal component
    HAP_MAIN_DOCUMENT and class CL_HAP_WD_DOCUMENT_UI. But it didn't go through. I think because this abap dynpro not being called due to url issue and thus dump says null pointer exception.
    Appreciate your response and I Look forward your insights.
    Prav

    << Do not post the same question across a number of forums >>

  • Appraisal Document Selection - HAP_MAIN_DOCUMENT / RABAX_STATE error

    When selecting the appraisal document within the MSS view or ESS view the following error message comes up. 
    Error when processing your request
    The URL http://saperpdev.sw.schwans.net:8080/sap/bc/webdynpro/sap/hap_main_document was not called due to an error.
    The following error text was processed in the system SC1 : Error in ABAP/4 statement when processing an internal table. table.
    The termination type was:  RABAX_STATE
    Thanks for your time.
    Edited by: Mary Jo Wartner on Mar 19, 2010 6:04 PM

    The config for the tab order was wiped out in the IMG.  Need the checkmarks replaced for what levels to display as tabs.

  • Unable to view the appraisal document in PMS

    Hi,
    We have upgraded our system from 7.01 to 7.4 and ECC from EHP4 to EHP7.
    After upgrade we are not able to open the appraisal document from
    Appraisal Inbox (Performance management) page/Employee & Reviewer Inbox
    page but getting blank screen.
    We had refer the note 1600380, according to the note we had checked the objects in all pages mentioned.
    But then also unable to view the appraisal document.
    Refer the attachment.
    Kindly guide us to resolve the issue.
    Regards-
    Poonam

    Hi ,
    Before upgrade it was working fine, There is no change in the authorisation in the backend.
    Kindly specify what kind of authorisation are required, so that we can check at our level.
    No error messages and logs are generated related to this.
    Regards-
    Poonam

  • Problem in Appraisal Document, in ESS

    hi all,
    we are getting problem in Appraisal document in career and job service in Employee self service.
    when we give the Administration Role to Ess user at portal level i am able to see the appraisal document but when we trying to see the document window is opening with page not found.
    if we delete the administrator role at portal side for the Ess user i am not able to see any appraisal document that i am getting the Error
         Appraisal Documents (WD UI)  
    Portal runtime error.
    An exception occurred while processing your request. Send the exception ID to your portal administrator.
    Exception ID: 11:51_08/01/11_0395_9581350
    Refer to the log file for details about this exception.
    i added Everyone default Group also.
    Wiating for your Reply.
    Still getting the problem.
    Thankyou
    swapna

    hi
    Check 1. Permission of roles  2. Security zone permissions
    administrator user will not work as it will be SSO, create proper test user in Portal and R/3 both, and then check whether it is working or not, still if any issue please reply.
    -Yogesh

  • Appraisal Documents (WD UI) open the same page in the pop up browser.

    Hi Expert,
        I am using the business package for  Appraisal Documents. I got some problem on navigate to the new browser.
       When the user click on a link in 'Appraisal Documents (WD UI)' in should open a new pop up for Appraisal Document(HAP_MAIN_DOCUMENT), but It open Appraisal Documents (WD UI) again in the new pop up browser.
       I am not sure whether i did it correct or not. Below is the step that i did.
    - Copy Appraisal Documents (WD UI) page and Appraisal Document'(HAP_MAIN_DOCUMENT) to the folder.
    - Change system alias for pages.
    - Add Appraisal Document (WD UI) operation of Employee Business object to Appraisal Documents (WD UI) page.
    - Assign them to the role.
      Could you please suggest. If you have a document about using the page from business package please provide me
    Thank you in advance,
    Noppong Jinbunluphol.

    we kindly recommend you to re-check note 1600380 paying attention to
    point 1.2 which deals with the relevant configuration to ESS for
    flexible process.
    please notice per default role delivery two services two roles for
    Performance Management will be displayed. Both services are named
    Appraisal documents. The difference is that one service is for the
    Predefined Management Process employee access, the other one for the
    configurable/flexible Performance Management employee access. The ESS
    business package is set up in a way that all services/iviews are in
    default role delivery available and customer can choose which one to
    leave in (This is different to MSS where there is an standard role
    delivery and a hidden iview delivery. There the customer can choose
    whether or not to remove existing iviews in standard role delivery or if
    the ones which are hidden shall be made visible in the role).

  • Need to create a mass upload program for appraisal document creation for multiple employee

    Hi Expertise,
    I need to create a mass upload program for appraisal document creation for manager and his multiple employee
    at a time using tcode appcreate.
    Please help me out.
    Best regards,
    Priyaranjan

    Hi Priyaranjan,
    I think you can take the abap'ers help in creating the program. But u need to provide them the exact functionality and the required specifications in creating the appraisal document.
    Even tcode also u can get it prepared by Abap'ers.
    Thanks and Regards
    Balaji

Maybe you are looking for