Appraisal/Feedback form in training and event management.

Hi Expert
I want to create appraisal feed back form or template in training & event management, where attendee can appraise the business event and instructor vis-a-versa.
My query is that-----
When I go to IMG node called appraisal under Training & event management node and click on appraisal catalog (t-code OOAM) than only one category group (personnel appraisal) is available however, I can create appraisal category and appraisal template under business event group for TEM appraisal.
Pls do let me know the steps to create the business event and attendee category group.
In integration table t77s0 I have set the following integration.
HAP00 REPLA set to A
SEMIN EVAPA is set to 3
AEMIN EVAEV is set to 2
Looking forward to your error resolving solution
REGARDS
SACHIN

Hi Expert
I am getting an informational message ( select the business event) while booking the attendee to business event through t code PV00.
when I execute the t code PV00 than I found only business event type field instead of business event than why this message is displaying.
Due to that message I am not able to book attendee to business event.
Pls let me know where I am wrong.
Regards
Sachin

Similar Messages

Appraisals & training and event management problem

Hi gurus.
I'm trying to configured the integration between Appraisal and Training & Event management (Appraising a Business Event and Attendee Appraisal
I set an attribute HAP00 REPLA = A .
But two problems occurred.
1.
The definition of Appraisal catalog for employees is no problem. But I have a problem with definition of Appraisal catalog for Business event and for Attendees.
Through the definition of Appraisal catalog via SPRO (Training and Event Management/Recurring Activities/Appraisals/Edit Appraisals Catalog) its possible to create an appraisal templates only for employees (it looks like that, because there is only Category group Personnel Appraisals and its not possible to add new category for example Attendee Appraisal).
Can somebody help me where I can define appraisal templates for Event management or how can I get the Appraisal catalog category groups - Appraising a Business Event and Attendee Appraisal?
2.
I set the attributes SEMIN EVAEV/EVAPA to the values 2/3 in connection with table T77BF.
When I run tcode PV33 or PV34 the matchcode of appraisal templates contains the list of all object type VA. The problem is that when I run tcode PV33 I dont want to see all appraisal templates, but only for appraising a Business Event.
It is possible to configure that so? If yes, how.
Thanks in advance.
Regards

Hi,
1. transaction LSO_CATALOG
Regards and Groetjes,
Maurice Hagen

Regarding Event Appraisal Functionality in Training and event management

Hi TEM gurus,
Client requirement is that an employee can give feedback for faculty daily. Suppose there is an event for 30 days and there are 5 instructors for this event. Now employee has to give feedback for all the instructor and day wise.
Is it possible for an employee to give feedback daily and for different instructors in training and event management ? How we can track the feedback given by the employee for different instructors day wise ?
I have given value as "A" in switch HAPP00 REPLA in T77S0 table. We have created different templates through OOAM.
While doing appraisal also i have to select employee individually and give event name again. Is there any way by which system can select all employees an event ID ?
kindly help me as ealry as possible.
Thanks and Best Regards
Puneet

Hello Puneet,
Regarding your query on appraisal for every day of the business event, I am not sure if that's possible as it's the business event appraisal we are talking of here..and not the day. But I think individiual instructor appraisal should not be a problem.
Hope this helps.
Best Regards.
Karan.

Appraisal for Training and Event Management

Hi Friends,
Hope every one doing well.
I have a requirement regarding the Appraisal of Attendee and send to its reporting manager for review and Manger may change the rating and completed or reject for re-appraise from the attendee.
Note: We are not using LSO, using old Training and event management and we don't have any ESS,MSS system simply doing in ECC system only.
here i need the notification for the reporting manager once the attendee save his ratings, if i do with old appraisal functionality with APPCREATE & APPCHANGE system is not giving any notifications to the reporting manager.
if i go to new appraisal system that is with PHAP_CATALOG and PHAP_ADMIN i am not able to get the course's what employee attended for the training.
please can any one share your view how to do this.
using BS - Appraisal Model
BG - Criteria Group
BK - Criterion
Thanks in advance,
Best Regards,
Praneeth kumar

Thanks for your suggestions.
i can't go through new appraisal model with catalog & template, because client is not having ESS,MSS. appraisal has to done in the ECC only.
Done the customization like this :
created scales
created appraisal model and assign the scales
for appraisal, Employee can do from APPCREATE transaction rate his own ratings and save.
Now Appraiser (Manager) from APPCHANGE complete the appraisal.
now my requirement is (1) after saving the APPCREATE by the employee, notification has to go to his reporting manager only. (2) Manager can do review/change and complete the process to his Employees only (who are reporting to him)
how can i do this, standard functionality is there or i have to go for ABAP coding ? if ABAP coding what i have to ask them to do.
Please help in this requirement.
Thanks and Best Regards,
Praneeth kumar

PMS and Training and Event Management

Hi Gurus,
Our one the of the client implementing PMS and Training and Event Management.
Could anyone suggest me what are the questions need to be asked in initial meeting with the client.
and if anyone has configuration documents on PMS and Training and Event management please forward to me,
my id would be [email protected]
Regards,
Rajesh Soma

The prerequisites of PMS is OM and PA is mandatory,
PMS is just like an interaction between the manager and the employees in an enterprise, based
On his work they are going to put some rating etc.
In the standard system employee called as “Appraise” Manager called as an “Appraiser” and Manager’s Manager called as Higher level manager “Part Appraiser “ can be a self-peer & customer they can save & provide their Comments to the “Appraiser”
First you take the requirement form client side what are the process and how Appraisal system in client then you have to prepare one sheet like Preparation ,Planning,Process
for business functions and other check below :-
HCM, Performance Management (Flexible) 01 - SAP Documentation
HCM, Performance Management (Predefined) 03 - SAP Documentation
check below once :-
Tcodes for PMS Basic Setting
OOHAP_BASIC      Basic Appraisal Template Settings
OOHAP_CATEGORY      Appraisal Category Settings
OOHAP_CAT_GROUP Category Group Settings
OOHAP_SETTINGS_PA PA: Settings
OOHAP_VALUE_TYPE Standard Value Lists
T codes for PMS Process
PHAP_ADMIN     Administrator - Appraisal Document
PHAP_CATALOG     Appraisal Template Catalog
PHAP_CHANGE     Change Appraisal Document
PHAP_CREATE     Create Appraisal
PHAP_PREPARE     Prepare Appraisal Documents
PHAP_SEARCH     Evaluate Appraisal Document
start your work with above things any other post here again ......

Training and Event management.Process Flow..

Hi, Experts,
Can any body give me some notes on Training and event management and process flow also like integration between ECC-6.0 to Non SAP
1.Training request
2.Appraisal documents for performance feedback
3.Tracking Feedback processes
Pls help me in configuring these services.
With Regards,
San Rao.

Hi san rao,
as per your reply you using the new appraisal template and also you have released the template now simply run the BSP application HAP_DOCUMENT and access the appraisal documents
attach these BSP applications in your portal system.
following pages of the above application will be help full
documents_todo
documents_received_open2
documents_where_participated
Regards,
Umesh Chaudhari.

Training and event managment

Hello Experts,
I am configuring Training and event managment.i want to upload a document about training feedback for a particular training event in the training catalog. Is it possible and where can i do that.plz help me.
Regards,
Shilpa

Hi Shilpa,
There is no place as such but what u can do is u can store the different feedback forms in different subtypes and if u want you can change the test from General desciption to Feedback1 ....
Hope it clarifies your doubt.
Award points if useful.
Regards,
Bhupesh

Training and event management issues

Hi guys,
i am stucked with some of issue in training and event management...
1. Altough client is using TEM but for frontend they are using ESS.. Now problem is search functionality is not working in system. I am getting 0 result.
2. I can see the catalog properly but when i do the booking for the future course then system shows course is successfully booked but in Training Activities list that course is not appearing and nothing updated in backend and if i do booking for future course in the backend then after that i can see that course in the frontend also. same is happening for cancellation. other functionality like prebook, qualification working properly in the system
3. Client is using Appraisal functionality. i have configured appraisal in the backend but how we can do for frontend.
kindly help me regarding these issue as early as possiblee....
Thanks and Best Regard
Puneet

Puneet
Can you please check SAP Note No. 1440812, 1439690, 1386556
Notes : 1421707, 1408134 ... if these can help.... Hope it helps...
Regarding training activities :
Can you please check the assignment of PERNR with User IT0105...
Also, are you using the customized BSP page ... If yes :
Please create a new BSP page copying from the standard BSP page and then enter the new page in the view LSPAGE_ALIAS_C.
Regarding appraisals in frontend, you will see a link of "perform course appraisal" under completed courses if you have configured this in a correct way.
Best Regards
Chetan

Training and Event Management Implementation based on competencies

Dear Friends,
My client is going ahead for Training and Event Managment Implementation. They have a basic requirement to start with and that is :
1) They have done competency mapping for all its employees and they want that the competencies of each employees(along with the skill levels) to be recorded in the system and that has to be the starting point of using Training and Event Management module.
2) They want, if the competencies can flow based on Job/ Position.
3) Some identifier to the competencies, whther it has flowed from Appraisal or any other sources in the Final Training Needs.
Kindly provide me help, as to how I will be able to achieve that and in what Infotypes the data pertaining to Training and Event Managment will be stored.
If u all can kindly share with me the User Manuals and Configuration Docs of Training and Event Management, it will be of great help.
Thank you all.

Hi,
Competencies can be stored as qualifications in PD and then by activation of PD PA intergration can be seen from pa30 infotype 24.
Qualifications can be stored against a Job/Position and are called as the Requirements. They are seen as a separate Tab and to which ever position the person is linked to the corresponding qualifications of the position will appear in the requirements tab.
You can maintain the proficiency and a note along with the qualification when assigned to a person.
Also Appraisals can have qualifications in the template rather than criteria and criteria groups.
Also after training is completed during the follow up we can create an appraisal and transfer the qualifications or simply transfer the qualifications to the employee.
Regards,
Divya

Few questions regarding Training and event management

Dear All,
Can you please help me with the following queries regarding Training and Event Management:
1. How to freeze a completed business event so that no changes to its record (like delete/update attendee details or event detail) is possible?
2. How to get feedback from attendee/faculty with a predefined format with rating (1-4 scale)
3. How to maintain department and category wise training man/hrs or training man/days?
Any help will be appreciated.
Regards,
Toa

Hi Toa,
1. Run report RHHISTO0 via SA38. Once the business event is flagged as "historical" no further changes can be done.
3. SM30 - T77S0 - Make the following swtiches active:
SEMIN AINST
SEMIN APART
Then when events are followed up, these training data is recorded to employee 2002 infotype. You can report on it via PT90 (for department-based selection use "Further selections")
Regards,
Dilek

Getting Training and Event Management Data using IT0031

Scenerio:
One of the Employee Is Retired. Now we hire it again for the same role ( extending its period after posting it as retired).
So the good thing that we can use the IT0031 "Reference Personnel Numbers" to get the desired ITs and found that can get other cutomized ITs by checking in the "Copy Infotype" attribute of IT records.
Now this seems to be valid if we are in the same module
but waht if i want to get this magic "Referencing of ITs" done for the "Training and Event Managment" Data of the employee.
Is it Possible Automatically ... or have to go fro ABAP... (I will not prefer ABAP)...
I hope i have stated the problem clearly ...
Feedback ... need it ASAP ...

Hi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi.

Setup Training and Event Management

Hi,
Can anyone guide me on how to setup "Training and Event Management" module in HR?
Thanks & regards,
LOI

Hi,
Training & Event Management runs between objects like business event group, business event type, types of resources like internal and external and resources also comprises of objects like room, different equipments.
Mainly you have to concentrate on the objects and the relationships which they hold.
You have to maintain settings for the above mentioned objects. and different infotypes.
First understand your client requirements then you can proceed for trainings / events.
It starts with training nomination and ends with training / trainee appraisal between these two steps there are differenct processes which purely depends on client to client.
Good Luck
Rafi

Training and Event Management -- Certificate

Gurus,
Does SAP provide a way where we can issue Certificates for attending a Training Program / qualifying in a skill as part of Training and Event Management or through other HR sub modules.
Points will be promptly awarded ....

Hi,
1st, please take a look at the documentation of SAP in the customizing. There the help is quite useful
To add new fields do the following:
- add the fields in structure CI_PPVARC
- create a form for each field in customer report (use RHKMIT30 as copy pattern)
- assign those fields in table T77VC
Also, I suggest to create a new form and notification abbreviation.
- create new notif. abbr. in table T77VE
- assign the notif. abbr. to an activity in table T77VI
- create a new form in SE71 (use a standard one as copy pattern e.g. HR_ALL_BUCH)
- assign new action to the form in table T77VD
Hope this helps
Michael

Delete Log File: Correspondence in Training and Event Management ( t77vp)

Is there a standard way of deleting the Log File: Correspondence in Training and Event Management ( T77VP ) from the system.
Thanks for your help.
Andi

Hi Niladri,
Please open a new discussion for this as it's a different question. Not only is this stated in the guidelines and makes it easier for other members to search for the right things, but it also increases your chances of getting the right answers, because users know you are looking at LSO rather than TEM and because many users, sadly, are driven by points primarily for giving answers and know you could not mark their answer as correct, because it's not your post.
Please also give context info: which correspondence solution are you using (Smartforms, Adobe forms, SAPscript) and which version of LSO.

Corespondence in Training And Event Management

Dear Friends,
We are using Correspondence functionality in Training and Event management. We have done chnages in the SAP Script based forms and Automatic mail triggering is set properly.
When mail notification is going to participants automatically then MAIL CONTENT is going as a PDF attachment file. When i am generating Correspondence Manually then notification is going as simple mail content, so formating of the mail in case of manual generation get distrubed. Header, text of mail and footer text are not coming properly in mail content.
How i can send mail notification as PDF file for manual correspondence also ? I am using TEM module not LSO.
Kindly help....
Thanks and Best Regards
Puneet

Hi Niladri,
Please open a new discussion for this as it's a different question. Not only is this stated in the guidelines and makes it easier for other members to search for the right things, but it also increases your chances of getting the right answers, because users know you are looking at LSO rather than TEM and because many users, sadly, are driven by points primarily for giving answers and know you could not mark their answer as correct, because it's not your post.
Please also give context info: which correspondence solution are you using (Smartforms, Adobe forms, SAPscript) and which version of LSO.

Appraisal/Feedback form in training and event management.

Similar Messages

Maybe you are looking for