Appraisal for assigned to Applicants

Dear Gurus,
I'm trying to create an interview appraisal form in PHAP_CATALOG. I assigned it to an External person however it didnt give me a list of applicants what i want is the list a applicants when I APPcreate the applarial form. So how should I assign this to an applicant ?
Any hints wil be most appreciated.

Hi,
Incident Analyst report under Incident management provides key performance metrics for a specified analyst. The data in this report includes the number of incidents assigned to the analyst, the number of incidents resolved by the analyst, the number of incidents
worked on by the analyst, and any labor logged against an incident.
List of Incidents report provides a list of all incidents within a certain time frame. The data in this report includes the users to whom incidents are assigned, when the incidents were created, and the current status of the incidents.
In addition, here is an article for some sample SCSM report queries, which including "show Incidents Assigned To Users", please check it.
https://gallery.technet.microsoft.com/Sample-SCSM-Report-Queries-53487b67
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

Where do you assign the Applicant Acknowledgement letter in E-Recruiting?

Hi All,
Where do you go to assign the applicant acknowledgement email correspondent letter in E-Recruiting? I want to be able to choose which applicant acknowledgment letter I wish to send to an applicant when they apply to a job.
Additionally, what if you had two applicant acknowledgement letters you wanted to choose between sending when an applicant applies? i.e. one for applicants wanting to become employees and another for say interns where the working in the letter may be different.
Thanks!
Message was edited by:
Ryan Hubbell

Not clear with your query....
why do u want mail merge when you can get letters thru smartforms of E-rec......
And how does a hr query comes in picture.....why this approach is being followed..
Regards,
divya

Error message -L3199-Total for assigned quantities exceeds quantity to be removed

Hi,
We are facing problem in picking at last HU in WM while creating transfer order for delivery document in PRD. We reproduced same issue in QXS.
Sales order was created with 40 Drums and also delivery with 40 Drums. Conversion factor mantained in material master is 441 DR = 30000KG, Base unit of measure is KG. While creating TO , we need to insert 5HU(each HU = 8DR) i different line items in TO . Tilll 4th HU is inserted i.e 32 DR(total) there is no issue. But as soon as we enter 5th HU below error is throwing.
Error Message - L3199-Total for assigned quantities exceeds quantity to be removed
In some cases delivery qty is showing more than picked qty (in other deliveries) and hence unable to create or confirm Transfer order.
Appreciate your comments on above issue /resolution or any OSS note/user exits/BADI exists ?
Regards,
Srinivas M

there is a huge amount of decimal dust
1 drum has a weight of 68.02721088435374
calculating the weight of 40 drums (quantity to be removed) in one single calculation rounds different to 5 * 8 drums where you actually have 5 individual calculations with a rounding that is then added to one result (assigned quantity).
Have a look into this KBA, as it explains different reactions based on the screens that are used.
However, I think you will not get lucky by this workaround as the you still have inaccurate quantities for the remaining drums
1926014 - LT03 - Overpicking allowed / not allowed during TO creation in foreground

OSA Appraisal for BP 1.41

Good Aftternoon.
I am implementing the Objective and Setting Appraisal for the last BP for ESS and MSS.
I have the following screens of the manual HR510. But i want know if the screens for the version 1.41 that work with webdynpro abap, have the same layout that this.
Image1
image2
Image3
Image4
We have appraisals of employee to chief and of chief to employee. We not are using appraisal 360º degree.
We have appraisal with critical group (Objective, Compentence and Plan development).
The chief can display the average of the appraisal that the employee did to the chief.
The employee can display the appraisal that this did to the chief and can consult the appraisal that the chief did to he.
We also need call a report created in BI and display data of average of a table Z . How can call this report?
Kind Regards.
Kind Regards
Edited by: consultor_ess_mss on Oct 25, 2009 12:11 AM
Edited by: consultor_ess_mss on Oct 25, 2009 12:25 AM

In latest version of WD ABAP based appraisals, you can change the layout through configuration in spro under -->> Personnel Management -->> Personnel Development -->> Objective settings and appraisals -->> Define tab and process configuration for templates.
However, you need to activate the switches HCM_OSA_CI_1 in order to do the above configuration using the node otherwise the node will not be visible.
Please read the documentation as much as possible in service marketplace and help.sap.com. There is lot of custumization which can be achieved using WD ABAP.
Regards,
Anil Kumar

Function module for assigning BP Number to the Postion ID in org model

Hi Experts,
Is there any function module for assigning BP Number to the Postion ID in organizational model.
The requirement is:
1)There are some employees which are reporting to a Manager who has a position ID.
2) Each of these employees should be assigned to the given position ID.
This can be done by First Locate the BP Record in SAP via the Vantive Person ID and retrieve the SAP BP Number.
<b>Then assign the SAP BP Number found to the Position ID.</b>
My question is <b>Is there any function module for assigning BP Number to the Postion ID .</b>
Looking forward for reply.
Thanks & Regards,
Renju.

Hi,
Org. management uses API classe objects with static methods as APIs. You may be able to achieve this using
CL_CRM_ORGMAN_SERVICES->MAPPING_ORGUNIT_TO_BP
Reward if helpful!
Regards,
Sudipta.

Function module for assigning a HU to delivery

Function module for assigning a HU in HU managed location to a delivery ??

Hello,
In FuGrp HU_BASIC_BAPIS Basic BAPIs for Hus
with F’tn BAPI_HU_CREATE Create handling unit with items
this creates HU's NOT yet assigned.
After F'tn BAPI_TRANSACTION_COMMIT
You can assign the HU via
F'tn BAPI_HU_CHANGE_HEADER
using the BAPIHUHEADER fields: PACK_MAT_OBJECT & PACK_MAT_OBJ_KEY.
Dirk

Changing Location for Assignment Files

I create lots of InCopy assignments from InDesign. (Using CC for both) For each New Assignment I have to change all the options: "Location for Assignment File", "All Spreads", "Link Image Files when Packaging". Is there a way to set the defaults for these? I waste a lot of time and often make mistakes doing this manually for each new assignment I create.
Thank you.

Thanks,
I figured that out minutes after I posted on this forum.
Regards,
Jim Brown,
Harris Corporation, Multimedia Center

Can't set IE Desktop as default program for Assigned Access

I have searched everywhere for this answer. Kiosk mode/assigned access is excellent. But it appears that you can only use IE Modern (Metro) for assigned access and the problem with that is I have found no way to completely lock down IE Modern.
I can only partially lock it down but users can still get to the address bar and settings very easily.
I either need some advice on setting IE to complete lockdown or how to set IE desktop for Assigned Access.

Perhaps you can create a special application that will be selected for Assigned Access. This application will then start the desktop variant of Internet Explorer (or an intermediate desktop program). There are some articles about such
operation based on Launcher class and custom file association.

Is it posssible for assigning p.o to copmpany code

hi,
is it posssible for assigning p.o to copmpany code.if yes which synario it works??
thaks
subhasis

Hi,
You can assign a purchasing organization to one company code. This is company-specific purchasing.
You can assign a purchasing organization to no company code. This purchasing organization can then procure for all plants assigned to it, irrespective of the company code to which the plant belongs.
Since each plant must be assigned to a company code, the company code can be determined via the plant in each procurement transaction, even if the procuring purchasing organization is not assigned to a company code.
A purchasing organization must be assigned to one or more plants. This is plant-specific purchasing
From the Materials Management and Purchasing view, the purchasing organization is responsible for all purchasing activities (including the processing of requests for quotations and purchase orders, for example).
The purchasing organization is integrated within the organizational structure as follows:
A purchasing organization can be assigned to several company codes.
(= Corporate-group-wide purchasing).
A purchasing organization can be assigned to one company code.
(= Company-specific purchasing).
A purchasing organization can also exist without being assigned to a company code.
Since each plant must be assigned to a company code, the latter can be determined via the plant at the time of each procurement transaction even if the procuring purchasing organization has not been assigned to a company code.
A purchasing organization must be assigned to one or more plants.
(= Plant-specific purchasing).
A purchasing organization can be linked to one or more other purchasing organizations.
(= reference purchasing organization)
For more on this topic, refer to Assign Purchasing Organization to Reference Purchasing Organization.
A purchasing organization can be divided into several purchasing groups that are responsible for different operational areas.
Each purchasing organization has its own info records and conditions for pricing.
Each purchasing organization has its own vendor master data.
Each purchasing organization evaluates its own vendors using MM Vendor Evaluation.
Authorizations for processing purchasing transactions can be assigned to each purchasing organization.
All items of an external purchasing document, that is, request for quotation, purchase order, contract, or scheduling agreement, belong to a purchasing organization.
The purchasing organization is the highest level of aggregation (after the organizational unit "client") for purchasing statistics.
The purchasing organization serves as the selection criterion for lists of all purchasing documents.
Possible organizational forms
You can organize your purchasing function in the following ways:
Corporate-group-wide purchasing
Company-specific purchasing
Plant-specific purchasing
All of these forms can co-exist within a single client.
Corporate-group-wide purchasing:
A purchasing organization is responsible for the purchasing activities of different company codes.
In this case, you do not assign a company code to the purchasing organization, but specify the company code concerned for each individual purchasing transaction. You assign plants from different company codes to the purchasing organization.
Company-specific purchasing:
A purchasing organization is responsible for the purchasing activities of just one company code.
In this case, you assign a company code to the purchasing organization. The purchasing organization may procure only for this company code. You assign only plants of the company code concerned to the purchasing organization.
Plant-specific purchasing:
A purchasing organization is responsible for the purchasing activities of one plant.
In this case, you assign the plant and the company code of the plant to the purchasing organization. The purchasing organization may procure for this plant only.
Note
If you wish to work with a mixture of the above organizational forms, the reference purchasing organization is of significance to you.
It is possible to allow one purchasing organization to access the contracts and conditions of another - a so-called reference purchasing organization. This makes it possible for advantageous terms negotiated by one purchasing organization to also be used by other purchasing organizations
Regards

Discount for students is Applicable for mac cs5 web, even for online 2yr students

discount for students is Applicable for mac cs5 web, even for online 2yr students, like Univ of Phoenix Online division - 2yr degree Information Technology?

Yes

Use condition for assigning query to data provider with Javascript

Hi gurus,
I want to assign a query dynamically to a data provider when the user activated a Tab Panel in a Web Template (BI7).
I can do that easily with the standard function SET_DATA_PROVIDER_PARAMETERS but this action is do each time of the activation of the Tab Panel.
So I try to make a javascript for assign the query to the data provider only one time.
My problem is I havenu2019t found a solution to get the default query assigning to the data provider.
Itu2019s an example of what I try to do with javascipt :
function Load_Query()
var r=GET_DATA_PROVIDER PARAMETER ("QUERYVIEW_DATA_PROVIDER")
if (r <>empty)
executeJS_SET_DATA_PROVIDER_PARAMETERS_R()
Thank you for help,
Franck

Hi Janice,
You can check the Option Display Variable values only once.
Thie you will the variables being displayed only once eventhough they are used in Multiple Data provider.
If you want som variable to be data provider specific, then , you can create a new variable and add it int eh query.
For example in your case let us say COMP1 is the variable for company code used in DP1 and DP2.
If you want a different values to be selected for company code in DP1 and DP2 just replce the variable in DP2 with a new variabel COMP2.
Hope this helps.
Regards.
Shafi.

FM for assign employee user name to Business partner (employee) in BP t.cod

Dear alll
I need fm / bapi for assigning employee (user name) to business partner in identification tcode in BP tcode. Any one help me?

Hi Saumya Govil
I have used
1. BP_BUPA_GET_HROBJECT to get the person number based on PARTNER_GUID.
2. pass this person number to FM BP_CENTRALPERSON_ASSIGN_USER to assign user ID.
Instead of the creating new central personal number i have used above BP_BUPA_GET_HROBJECT fm.
Thanks for your quick reply.

Job error (0x80004005) received for assignment

I have a SP2 client that is failing to download the patch content. The client has been repaired, wmi repository rebuilt,software distribution folder rebuilt, and the sccm client has been uninstalled/reboot/installed. The cache folder is not repopulating
after the client was installed again after removal. The logs show the following errors. Any ideas on a solution?
UpdateDeployment:
Job error (0x80004005) received for assignment ({C6F24DB9-54F5-4018-906D-980C0B9A0BFF}) action
UpdatesDeploymentAgent 4/1/2013 3:26:53 PM
4632 (0x1218)
Updates will not be made available UpdatesDeploymentAgent
4/1/2013 3:26:53 PM 4632 (0x1218)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SMS_SUMAgentAssignmentError_AdvanceDownloadJob
AssignmentId = "{C6F24DB9-54F5-4018-906D-980C0B9A0BFF}";
ClientID = "GUID:15be7fe2-c379-4e72-842d-1ca16c820ffa";
DateTime = "20130401192653.419000+000";
insAssignmentId = "{C6F24DB9-54F5-4018-906D-980C0B9A0BFF}";
MachineName = "computer";
ProcessID = 976;
SiteCode = "ABC";
ThreadID = 4632;
Win32ErrorCode = 2147500037;
SDMAgent:
Failed to get SDM CI (Site_87BC43B8-0AA4-4C97-B5DE-F9A5735BCEF3/SUM_ac8b33b5-2df2-4e6a-8d48-105ba0cc3bff) from type store
CTypeStore::GetCI(Site_87BC43B8-0AA4-4C97-B5DE-F9A5735BCEF3/SUM_ac8b33b5-2df2-4e6a-8d48-105ba0cc3bff:1) failed (0x8007000d).
UpdatesHandler:
No updates to process. Cannot continue the job ({5770FB4E-6350-40CA-9633-67D7C53E11A9}).
Failed to initiate job. Error = 0x80004005
UpdatesHandler 4/1/2013 3:26:53 PM
4008 (0x0FA8)

Hello This error Win32ErrorCode = 2147500037 completelly shows WMI error,
whenever you recive this error, cleint will not download any software/updated,
for resolve this issue you will have to remove SMSClientAgent from Client machine, then reboot the machine, then again install the sms client agent,
and then iniate the machine policy and run the update or software, your application will isntall now,
Sharad Singh | My blogs: SharadTech | Twitter:
@SinghSharaad | | Please mark as helpful/answer if this resolved your issue

IView for assigning substitute for a manager in MSS

Hi Gurus
Is there any inbuilt iView (in mySAP EPR 2004 or 2005) for assigning a substitute for a manager when manger is not available or goes on leave so that managers MSS tasks can be carried by his substitute/assistant/backup manager etc.
Regards
Yugandhar Reddy

Yugandhar,
Try exploring the UWL in MSS. It does have the functionality of assigning substitutes etc.. <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/57/c223be82104792a15c2df11377b9ed/frameset.htm">SAP Help</a> For ERP2005.
- Javed.

What are the images URI for Update , Add Applicant and unlock

what are the images URI for Update , Add Applicant and unlock
where can I find all images URI in OAF

For update - updateicon_enabled.gif
You can find all other in $OA_MEDIA derectory.
-Anand

Appraisal for assigned to Applicants

Similar Messages

Maybe you are looking for