Appraisal form doesn't open in new window

Hi Guru's,
We are using the BSP application HAP_Document. For the employee we use the "page with flow logic" (SE80) documents_receives_open2.html. This gives an overview of open appraisals.
Our problem is, that when an employee clicks on the link to an appraisal form, that the form opens in the same frame. It should open in a new window.
Hope you can tell me how we can adjust this.
Thanks!
Marco

Hope you've set the option 'Open In New Window' in BSP iView properties.
Also check that  In homepage config. for resource which calls this application.For url for pcd page
Replace roles with exroles for e.g. exroles://portal......
This two suggestions solve you issue,
Regards

Similar Messages

  • Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything.

    Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything. Any work around to fix this?

    See this lnk for a fix, it worked for me!
    http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

  • FF doesn't open a new window , and doesn't open at all when I close it and try to open it again.

    Initially when I start my PC Windows 7 Ultimate , FF opens fine , but it doesn't open a new window when I click on the option "Open a new Window " in the taskbar .When I right-click a tab and select the option "Move to a new Window" then too it doesn't work. Next when I close FF and and try to reopen it , it doesn't open at all.I have FF v34.0.5.

    Gnome-shell issue. You can disable desktop management as a temporary fix, but the next gnome-shell update will fix the problem.
    https://bbs.archlinux.org/viewtopic.php?id=175993
    https://bugzilla.gnome.org/show_bug.cgi?id=722510
    https://bugzilla.gnome.org/show_bug.cgi?id=722690

  • Why when I click on a bookmark it doesn't open a new window, it takes over a window I am working on

    Why when I click on a bookmark it doesn't open a new window, it takes over a window I am working on

    Also, if you right click, the menu will include; '''''Open New Tab''''' and
    '''''Open New Window'''''.

  • Since being upgraded to 3.6.11 CTRL+N doesn't open a new window

    My Firefox was updated to 3.6.10 yesterday (3.6.11 today) and now when I try and use CTRL+N to open a new window, nothing happens.
    File - New Window doesn't work either.
    I can open new tabs

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Nautilus doesn't open a new window when clicked

    For a while now, I have been experiencing an annoying issue.
    Whenever I open Nautilus either by clicking the icon in the drawer (example: http://i.imgur.com/uZc3n7S.png) or by hitting "Super" (the Windows key) and typing nautilus+enter, Nautilus doesn't create a new window anymore. Instead, it just shows "Files" in the top bar, as seen here: http://i.imgur.com/Ho2nJhv.png
    I can open a Nautilus window by clicking on the "Files" item in the top bar and clicking "New Window", as seen here: http://i.imgur.com/7IrWqvr.png
    Also, whenever my desktop is focused, the "Files" item is visible in the top bar. In the drawer, the Nautilus icon is always highlighted as well. This leads me to believe that GNOME thinks Nautilus is already open, while it is not.
    Note that I have enabled my desktop to be managed by Nautilus, so I can have icons on my desktop. I'm not sure, but if I recall correctly, this problem started ever since the one time I ran gnome-settings-daemon manually, to test if a certain bug still exists.
    Has anyone experienced a similar issue? How could I track down why this is happening?
    Last edited by Gerry (2014-02-12 20:59:18)

    Gnome-shell issue. You can disable desktop management as a temporary fix, but the next gnome-shell update will fix the problem.
    https://bbs.archlinux.org/viewtopic.php?id=175993
    https://bugzilla.gnome.org/show_bug.cgi?id=722510
    https://bugzilla.gnome.org/show_bug.cgi?id=722690

  • New Window Target doesn't open a new window in Contribute but does in Firefox

    I have made the neccessary steps to allow a link to open in a
    new window by choosing "New Window" as the Target, and when testing
    the published page within the Contribute browser it does not seem
    to work. So I went ahead and tested it in Firefox (and other
    browsers as well) and it does work. Doesn't this seem strange?
    Anyone else having this problem? Does anyone know why Contribute
    works this way? Thanks in advance for your help.
    Todd Temple

    I did a quick test by changing a link to open in a new
    window. Within Contribute, when I click the link, a new IE window
    opened. Can you provide a link to the page or the source code of
    the page?

  • Mail 2.1 doesn't open a new Window "New E-Mail" in an appropriate time

    after clicking the command button "new E-Mail" it takes a couple of minutes until a new empty windows comes up. Has anyone an idea?

    What type of mail account is this (POP, IMAP, .Mac)?
    Verify/repair the startup disk (not just permissions), as described here:
    The Repair functions of Disk Utility: what's it all about?
    Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list.
    Open Keychain Access > Keychain First Aid and verify/repair the keychain in case there is something amiss there that has a bearing on this.
    Also, try turning OFF the Search For Certificates options in Keychain Access > Preferences if any of them is ON. Take a look at the following articles for a more extensive discussion of this particular issue:
    http://www.hawkwings.net/2006/07/18/apple-mail-phones-home-too/
    http://www.macgeekery.com/tips/mailapp_doesnt_phone_homeeither/
    Finally, do you have any Mail plug-ins or system utilities that could interfere with Mail? In the Finder, go to each of the following folders (if they exist). What do you see there?
    /Library/InputManagers/
    ~/Library/InputManagers/
    /Library/Mail/Bundles/
    ~/Library/Mail/Bundles/
    Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.

  • Opening a new window over a new window

    The command given below in javascripts opens a new window.But if I
    execute the same command in an another open new window then it doesn't
    open a new window,infact it is over the existing window !
    But my requirement is to open a new window everytime I want to do a new
    functinality.
    Please help me.
    onClick="window.open('New.jsp','NewWindow','location=no,menubar=no,resizable=yes,toolbar=no,scrollbars=yes,left=' + window.screen.availWidth*1/8 + ',top=' +window.screen.availHeight*1/14 + ',width=' + window.screen.availWidth*3/4 + ',height=' + window.screen.availHeight*6/7)"

    Hi Jetsam thanks for all u replies.
    Well I know what was the problem
    My href statement was
    <a href="JSPFile4.jsp target = "Window3" onClick="window.open('','Window3','location=no,menubar=no,resizable=yes,toolbar=no,scrollbars=yes,left=' + window.screen.availWidth*1/4 + ',top=' +window.screen.availHeight*1/6 + ',width=' + window.screen.availWidth*3/6 + ',height=' + window.screen.availHeight*6/6)">Manohar</a>
    was same for all the pages.Hence all the page was being opened at the
    same spot.Well changed some info like top,left etc and the new window will be opened in different location and we will distintly see a new window being opened.
    thanks again Jetsam for ur replies.

  • Doesn't start when starting as administrator. Error Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

    Update firefox, it asked me to update flash, I tried to update flash but it said I had to close firefox. A box came up and said the Flash install would continue when I closed firefox. I closed all firefox windows and no update of flash occurred. I tried relaunching firefox but got the "Doesn't start when starting as administrator. Error Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." message. I rebooted the system, no improvement. I tried to run firefox as administrator and got the same message. Either I find a fix or I won't be able to use firefox and will have to go back to ie.

    -> press '''CTRL''' + '''SHIFT''' + '''ESC''' to Open Task Manager -> Processes tab -> right-click '''firefox.exe''' and click '''End Process Tree''' -> close Task Manager
    Troubleshooting extensions and themes
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    Troubleshooting plugins
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins
    Check and tell if its working.

  • I try to launch firefox get the following message "firefox is already running, but is not resonding. to open a new window, you must first close the existing firefox process, or restart your system" firefox is not running and restart doesn't work

    when I launch firefox get the following message "firefox is already running, but is not resonding. to open a new window, you must first close the existing firefox process, or restart your system" firefox not running and a restart doesn't solve the problem

    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 12.0.x: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    See also:
    *https://support.mozilla.org/kb/Firefox+is+already+running+but+is+not+responding
    *http://kb.mozillazine.org/Profile_in_use
    *http://kb.mozillazine.org/Recovering_a_missing_profile

  • FF4 on Snow Leopard: Cmd-N, "New Window", doesn't open, is in Window menu, but isn't accessible. Add-ons all disabled.

    I installed FF4 yesterday onto my Mac running Snow Leopard 10.6.7. Today I can't open a "new window" using either the "New Window" menu under File, or using Cmd-N. (Don't know if it would have worked yesterday - I didn't try.) I disabled all (4) of my add-ons, restarted and the new windows are still failing to open. The new windows are listed in the "Window" menu, but even using that, I can't open them. Showing all open windows, using the built-in Mac "Expose" (F9) feature also doesn't show these windows.

    Well, today my New Window functionality is working fine, not fast, but it works. Nothing has changed - no new software or OS updates. Oh, well, thanks for looking at this.

  • When I open a new window, it doesn't attach itself to the bottom toolbar? I'm using XP Pro and Firefox 6.0.2.

    It's explained pretty well in my initial question. Not sure what else you would need in the way of details.
    I will say it's been going on for a month or so, and it happens every time I start Firefox, and every time I open a new window.

    Thank you for taking the time to leave an answer for me, Poochie1. I really appreciate your attempt at helping me.
    Unfortunately, as smart as I thought I was when I asked the question, I apparently wasn't that smart, because I didn't explain my problem so you'd know what the heck I was talking about.
    I think it's because I'm probably not using the correct terminology. I'll try again.
    When I open a new window, it just kind of floats on the screen. Before this new update, I could open a window and it was lined up with the start taskbar located at the bottom of the screen. Sometimes the new window will cover up the taskbar partially, and sometimes completely. I have to move it up and align it with the taskbar. Then, when I open another new window, I have to line that one up with the window underneath it.
    I hope that description is better than my first one, and I hope you can make some sense out of it, Poochi (and anyone else who happens by here).
    Again, thank you for your help.

  • When I open a new windows in IE doesn't appear maximized

    Hello
    When I click in a link to open a new windows in Internet Explorer I use this code:
    on (press) {getURL("http://www.google.com", blank);
    Everything is fine but the new windows is NOT maximized, I would like that new windows appears maximized in Internet Explorer.
    thanks in advance

    Did you remove your personal data when uninstalling and have created a new default profile folder?
    It is possible that you previously had an extension that set focus to the location bar.
    *Custom New Tab: https://addons.mozilla.org/firefox/addon/custom-new-tab/

  • When I open a New window the window doesn't open with a blank page, it opens with my start-up page!

    When I open Firefox, it opens to pages I was on when I last closed it. After that, when I open a brand new window, and I don't use a link, it isn't a blank page but instead it shows the same pages as when I started up Firefox. I don't need two windows of the very same pages! I have to delete one of two of the duplicated pages and then my url into the bar to get to the page I want. I want to have a new window with a blank page

    It is the default action in Firefox to open a new window with the home page(s).
    A possibility to avoid that is a bookmarks (e.g. on the Bookmarks Toolbar) with the location set to about:blank and use Shift + left-click to open a blank window or set the Home page to about:blank and use a bookmark to open the home page.

Maybe you are looking for

  • Desktop Folder Redirection slow access

    Ok, I've scoured the network for weeks now trying to resolve this. Using Windows 7 fully patched, and file servers are 2012 R2 We have folder redirection in place for Documents and Desktop. The folders are redirected to one of their mapped drives.  W

  • Junit test runner error in jDeveloper 11.1.1.6.0

    Hi, I am having problem with the running of test project in jdeveloper. I created the test project using Application Test Framework from the Model project. Model project has the AM and PVOs used for BI VOs. The test project is created with all the se

  • No Service Abroad

    I'm an EE customer currently in Germany and my phone has no service. I rang customer services when I was in the UK last week to explain I would be working in Germany over the summer and they upgraded my account to an ee extra account and said I could

  • Movement types corrsponds to Inbound ,Outbound and Internal transaction

    Hi, Can anyone tell me the list of movement types corresponding  to the Inbound,Outbound  and for Internal Transaction. for example:  movement type 101 corresponds to Inbound transaction. Thanks

  • CS4 output from CS5.5

    My printshop refuses to accept output from Indesign 5.5 Is there a receipe for converting this output to CS4?