Appraisal template and Assessment template

Hi
I am unable to create any new appraisal/assessment template as it shows that" Field is protected against update ".
Please help me with a solution for this.
Thanks
Sangeeta

Are you trying to create via PUI?
If yes, try to create it via Self Service responsibility HR Professional V4.0
Regards,
Santhosh Jose

Similar Messages

Technical Link b/w Employee and Appraisal Template

Hi,
Can anybody please help me in finding the technical link b/w an Employee and an Appraisal Template? In other words, I need to know the table name(s) in which data is stored while appraisal processed is going on. I can view the appraisal form in IT0024 and IT0025 in PA. I can also see the objects VA, VB & VC in PP01, but where are these entries stored in the table.
We are on SAP R/3 4.7 (Enterprise) and using new Objective Setting and Appraisal Component.
Thanks
Vikas Bhatia

Hi there,
Function module 'HRHAP_DOCUMENT_GET_LIST' can be used for this purpose.
In order to find the objects you want, make sure you set the appraisal templates for calling this function as well as all of the other required parameters. If you need help for the other parameters then let me know.
The fields for the template table import parameter need to be set as follows:
plvar = Active plan version
otype = VA or VB or VC
objid = appraisal template id
This returns two tables - the appraisals and the associated documents.
Other tables you may be interested in are :
HRHAP_T
HRHAP
HRHAP_APPER
HRHAP_APPEE
Hope this helps you out. Any questions, let me know.
If this works, please award the points for this advice.
Cheers
Colin.

Transport Category and Appraisal Template

I am trying to transport category and Appraisal Template Transport:
1) Right clicked on Category, select transport and clicked enter, it gave me the following error:
Object "R3TR" "TABL" "T77HAP_C_OTHER" is an automatically generated object and cannot be transported. All tables beginning with "M_" belong to matchcodes and can only be accessed with these
After this I need to transport Appraisal Template, Please Help

Hi,
I cannot place the error message, but...
go to transaction "oohap_category" and select the category you want to transport, then go in the menu and select transport. That should work.
Regards and Groetjes,
Maurice Hagen

PIQSMFU:How difference appraisals tab and different appraisal template tab

Hi,
I have question about appraisals
T-code : PIQSMFU
Enter - SM Code
      - Year
      - Semester
      - Event packate
and Search Student
I booked ST to the same SM
some ST show in Appraisals tab and can assign grade
and some ST don't show in this tab only show in Different appraisals template tab
can't assign grade to ST.
At the SM assign appraisals template =0001
How difference appraisals tab and different appraisal template tab. If the data incorrect please suggestion
Thanks you
Best Regards
Kanya.b

Hi Kanya,
The reason which some students are displayed in different appraisal template tab and some of them are displayed in appraisals tab is the modification of appraisal template. I mean, you have changed something in appraisal template "001" for example you added a new appraisal type to the appraisal template or dropped an appraisal type from that. The students booked the module with an older template, you see the students on different appraisal template tab, and the others booked with the actual appraisal template, you see them in appraisal tab.
When you click two times on the appraisal type in the different appraisal template, below there is opened the appraisal types and you can give grade for each appraisal type.
I hope, this would be answer your question.
Best Regards,
Ayse S.

Training and Event Management - Appraisal Template

I have created an appraisal template but when I am trying to update score, it is neither creating a new APPRAISAL object nor it is getting saved. Please help me rectifying this issue.

Hi,
I donu2019t understand what you are trying ask . kindly let me know your scenario then Iu2019ll solve your problem if I could.
Prasath

Appraisal Template catalog

Hi all ,
There is custom appraisal template has been created and also SPRO configuration is also done , but i am unable to display
that custome appraisal template over a Talent Assessment portal . what would be the problem . If any one came accross same problem before please hep.
Regards
Chetan

problem solve by making changes in HRT1002 .

OSA - ERROR while downloading \ uploading appraisal template

Hello!
May be some of you came across the same problem: when appraisal template using object Q as reference object for VB or VC is being uploading into the other client it is copied with error. The relationship 607 between objects is not ceated in the other client, so the object is not correct. Is it a standard solution
Thanks Ekaterina

Hello, once more!
I am inclined to think that lack of relationship 607 between objects VB and Q while uploading appraisal template into other client is due to a programm error but we failed to find relativa SAP Note, may be someone came across the problem?

Change the Appraisal Template in Mid of Year.

Hi All,
We want to edit the appraisal template which is being used in Production.
System is allowing to edit the template in development as there are no documents created. Once we transport the change to production what will be the implication.
Q1. Is it recommended to change the template after it is being used.
Q2. If really need to edit the template in mid of appraisal process how do we go forward.
Thanking you in advance.
Kamal R.
Edited by: Nalin Jain on Aug 5, 2009 7:41 AM

Hi Suresh,
We are on ECC 6.0 and SP 43.
We need to put some extra fields / Notes to the targets and extra sub statuses to correctly identify the condition.
But already appraisal process started and documents are created. Now we cannot either create the same documents in new template or postpone the appraisal template change to next year.
In this situation we decided to change the existing template. We want to know what will be the implications if we change the template in development and transport it to production???
Download and upload will create a new template which will not be useful for our case.
Thanking you in advance.
regards,
Kamal.

Transporting Appraisal Template in Predefined Performance Management

Hi all
I have created a transport for Category and Appraisal Template through transcation PHAP_CATALOG by right clicking onto the Object and selecting Transport. After creating the transport I have successfully transported it in the QAS.
Now, in QAS I am not able to view Appraisal Template in the Appraisal Catalog (Transaction: PHAP_CATALOG) while the Category exists in the catalog. I have checked the transported Appraisal template in transaction PP01and have found that the object exists in QAS.
Please advice on, why isnt the appraisal template being displayed and linked to the required category in Appraisal Catalog Transaction: PHAP_CATALOG). And what is the corrective action required.
Regards
Imran Ali Siddiqui

Hi Imran,
Please check note 1475428, it may help you find a solution to your issue. (note also that regarding the switch they must be set in both source and target system)
Hope this help
Sarah

Appraisal Template ID in which table

Hi Friends-
In this standard report RHXHAP_APP_DOC_PREPARE_ORG one field Appraisal Template is ther where it shows 8 digit ID number ,
Now my i have two querys
1) In which table i can see this Template ID number as later i have to relat it to fetch other data (its there in hrp1000 with OType VA ) but that is not useful for me.
2) on this statndard screen i have to add Employee number ( pernr ) too and based on that too i have to create appraisal document ( can any one tell me any simple process for this )
Any input will be big help for me
Regards
Meeta & Radha

Hi
Copying prog is making this req more complex and then i have to add Personal number , sub area etc too in selection screen.
So am looking any standards FM which can take personal number and Template id as input and create apprisal id for that employee.
Regards
Meeta & Radha

APPRAISAL TEMPLATE ISSUE (HR ABAP)

I have a appraisal template which is giving me 3 blank KRA's as standard one when template document is created from tcode PHAP_PREPARE_PA .
for appraiser and appraisee template.
but i want to add KRA's to the template during the creation of the template document
from tcode PHAP_PREPARE_PA based on the KRA's maintained for his position in a z table????

Hi Nandy,
As I understood you would appraisal items come from position requirements. If this is the case and If you go in standard way by adding requirements to your position you can use "Fixed enhancement" in "Dynamic Settings" section. The name of BADI is "HRHAP00_ENHANCE_FIX" otherwise you should develop your own code and use it through "Free enhancement"
Regards,
Omid

Adding a box in Portal for Performance appraisal template

Dear Experts,
We have already released a performance appraisal template and its in production use for a while now.
Now, client wants to add 1 box titled 'Managers comment'. Since its already released template I cant make changes in it and add a criteria in the form of 'Managers Comment'. What is the solution? Is there a way by which we can make this box appear in portal through coding? This change is required in a template which is in use. We cant create a new template.
I know there is a note to make changes to released appraisal template but as its risky I dont want to use it.
Please advise.

you cant make changes to released template, if you do also, new changes wont be shown
Please refer the note 888650
and do the steps as indicated in order to cancel already released one

Appraisal template standard buttons not working via ESS/MSS

Hi experts,
The error which I am facing in appraisal template is as follows
When I click on any button on appraisal template no action takes place.
Kindly let me know how can I resolve this error.
we are using BSP application HAP_DOCUMENT.
according to me page fragment 'document_buttons.htm' (Method CONVERT_BUTTON_TO_UI) contains the code for button creation and button handling
the page fragment 'document_buttons.htm' is getting triggered when page is initialized but it is not triggering when button is clicked.
Additional info that might be useful to resolve the issue:
1) While viewing appraisal template's web layout in t-code PHAP_CATALOG_PA.
I am facing following script error.
This error reappears when I click on any standard button For eg SAVE
2) We are currently using IE 8
3) We recently upgraded ECC system from ECC 6.0 to ECC 6.0 / EHP 6 (ECC 6.6)
4) I checked SICF and corresponding services are active
Thanks in advance

Hi Adrian,
Design2008 service is inactive in my system.when activated temporarily I was not able to see previous page (Blank page was displayed) in my appraisal application.
For BSP application HAP_document, i checked SICF->default host->SAP->BC->BSP->SAP->HAP_document.This service is active.
The image which I have attached with my question is appraisal template's web layout in t-code PHAP_CATALOG_PA.
regards
Ninad

Customised Badi not appearing in Appraisal Template

Hi All..
I have created a Customized BAdi from an existing BAdi..i have also included this BAdi in Enhancement Area using the transaction oohap_basic.But when i go back to appraisal template and try to insert this BAdi in a column it doesnt reflect their..so please can anybody help me out with a solution..The BAdi is appearing in Enhancement area in oohap_basic and also in table T77HAP_FLT_EXI

Hi
Using tcode OOAM, go to the category to which your template belongs, and look in the Enhancements tab. The custom enhancement should be available in the available enhancements section. Move this to the selected enhancements section. Then you should be able to use it in the template.
Hope this helps.
Regards,
Vikas Bhatia

How to restrict maximum 5 part appraisers in the Appraisal template

Dear All
Our requirement is to allow maximum 5 part appraisers in the Appraisal template. Currently the System is calculating & restricting to only 2 part appraisers (as the total columns used is 16).
Even on using the BADI - Maximum Number of Part Appraisers (HRHAP00_MAX_P_APPER), we are not able to attach more than 2 part appraisers as the defaulted value is overriding the BADI value. This is because as per BADI - Maximum Number of Part Appraisers (HRHAP00_MAX_P_APPER) : The calculated number of part appraisers must always be greater than the desired number of part appraisers. If this is not the case, the system outputs an error message and resets the desired value.
Also the link http://help.sap.com/saphelp_rc10/helpdata/en/ae/ec6f01d143e141992f22fcf31a7aaa/content.htm says - "In the case of an approval process for a 360° degree feedback, you do not need to restrict the number of part appraisers. In all other part appraisal processes, the system restricts the maximum number of part appraisers". But even in 360° degree template, on selecting 16 columns the system is calculating & defaulting 2 part appraisers.
Kindly advice how to restrict the no. of part appraisers to 5 when the system is calculating only 2 part appraisers as we are using 16 columns in the Appraisal template.
Regards
Ravindra

Get Maximum Number of Part Appraisers
Functionality
The method determines the calculated number of part apparaisers.
Result
The number of desired part appraisers is returned.
Notes
The calculated number of part appraisers must always be greater than the desired number of part appraisers. If this is not the case, the system outputs an error message and resets the desired value.
Parameters
FLT_VAL (Import) Parameter FLT_VAL of Method MAXIMUM_NUMBER_GET
CALCULATED_NUMBER (Import) Calculated Number of Part Appraisers
MAXIMUM_NUMBER (Export) Number of Part Appraisers (set by implementation)
see the note 530913 that ie no of appraisers are stuck at 17
ELSE.
no_of_part_appraisers = ( c_column_max_number - l_total_columns )
DIV l_part_columns.
ENDIF.

Adding a new substatus in Appraisal template

Hi All
I am trying to add a new substatus in phap_catalog_pa. The status has been defined in oohap_basic , but while checking the same in phap_catalog_pa , it throws the error , " Status cannot be deleted ". I am able to view the substatus but unable to select the check box.
Please let me know how can i add a new status in the existing template.
Thanks

your appraisal template is in released status or not released status.
if it is in released status this error will come, you have to do un-release and then add new sub-status.
find the screen shots:

Appraisal template and Assessment template

Similar Messages

Maybe you are looking for