Appraisal template is not allowing to enter values in 25 infotype
Dear consultants,
I have created an appraisal status and released it .and its showing in 25 infotype .
when i click the execute button it should allow me to enter the ratings but its not happening when i execute
all fields are grayed out and i cant enter any ratings there.in status flow tab of template i have checked In preperation,in process and comleted statuses.
please help me out.
Edited by: Raj on Jul 31, 2009 11:57 AM
Please check whether you have kept the entry open in the template.
In the criterion where you define the columns and the scales there is a column called as value. check the value there. IF it is no entry then all the rating fields normally are greyed out. Change it to either optional or mandatory according to the requirement.
Hope this helps.
Regards,
Naren.
Similar Messages
-
ADOBE Interactive Form in webdynpro not allowing to enter value
Hi,
I have developed a Adobe interactive form in SFP and then i developed webdynpro component , then integrated into webdynpro. while running the webdynpro application which is showing the adobeform but the input fields are not allowed to enter value.
The same adobe form can be allowed to enter values while running from the report. i dunno how to set the value of the importing parameter fillable = 'X' in webdynpro.
regards,
RoopsHi friends,
The above mentioned setting are all active like Zc...Layout, enabled check box etc.. but when i make it to Activex which is not displaying form in the portal while running the application instead it shows red color X mark.. is there any setting required to run adobe with webdynpro ..
1.) any notes or patches ???
2.) is activex mandatory for running interactive form in webdunpro? if yes what are system setting required....
Regards,
Roops. -
Not allowing to enter PO price with 3 decimals
Hi,
This is reg an issue, when i try to create PO and enter PO price with 3 decimals, its not allowing to enter value as for eg .231 whereas it allows .23.
Can any one explain why its not allowing to enter 3 decimal values.
Wheather this can be changed in configuration, if not what could be the corrective measure.
Regards
vasanthDear vasanth,
Please check OY04. However the customizing here normally will be defined at very
first you the company use the system. Frequently changes or subsequently change
might affect the already purchase document in the system and this will create system
inconsistency.
Therefore, if you want to do this, if have to study it carefully and make sure it not affect
the existing purchase document or else you will be in inconsistency.
I will advice you to make a thorough test in sandbox to see if suit you and study all the
impact. If ot was ok, then only goto prod.
Best Regards,
Ian Wong -
Duplicate record should not allow to enter
hi
i have three columns
sno Number;
in time date;
out time date;
this is the multiple taulat layout :
User enter at run time values like this :
1 01:15 03:00
1 01:15 03:00 Here second record User should not allow to enter same Sno for Same In time and End time
Before entering the data the total no of records : 0
can u give me any suggestion.
how to validate the columns.If you have a Unique Constraint on the table for these there columns it will prevent duplicate records.
1 01:15 03:00 Here second record User should not allow to enter same Sno for Same In time and End timeBy "Second User" do you mean a user in a seperate Forms Session? If so, there is no way to check if the user in session 2 is entering a duplicate of a record entered by a user is session 1 accept through the use of a unique constraint on the table.
There are methods available for checking for duplicates in the same Forms Session. Check out: Avoid duplicates in the same block and Forms: Record Group Processing (Duplicate Value Checking) for more information.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly. -
You are not allowed to enter a tax jurisdiction code for country US
Hi All,
We are having this message popping up "You are not allowed to enter a tax jurisdiction code for country US" when we try to add an item to a shopping cart. SRM 4.0 Classic scenario.
Also when i process the shopping cart and create a PO out of it, our R/3 4.6C dosnot let me release the PO and error message is :"no tax jurisdiction code found"
I have looked at some of the earlier threads but i could not find a definite solution. Has anybody faced similar problems? Please let me know !
Thanks
SundeepHi Sudeep,
How did it work? Do you have to implement any BADI's or SRM or R/3 side? As we are getting same error while creating Shopping Cart in SRM.
I have checked the plant data in R/3 and Jurisdiction code has been maintained there.
Please advise
Thank you
Ritesh -
Parameter Field issue : Parameter not showing in enter values.
i got three paramater setup...
All three parameters are used in record selection formula.
When i click on refresh, only two parameters are showing up in enter values screen...why thired parameter is missing?
two parameters are date and third one is string. String parameter is not showing in enter values. How to fix this?.Hi,
I haven't run into this problem so I'm not sure if it's a bug or not. When you added the parameter to the report, did you type the parameter into the formula yourself or did your double-click on it from the Field Explorer?
It should be fine adding it from the Field Explorer. Strange but not really sure why it's not working for you though.
Good luck,
Brian -
XML based Adobe form is not allowing to input values while display on IE
Hi Experts
I have intergarted an XML based adobe form in webdynpro with inputs fields and submit button.
But on display on Internet expolrer it doesn't allow to input values even button dosen't work.
Please help me how would it will allow to input values .
Many thanks in advancehi dear
yes the enabled property is checked but still form doesn't allow to enter value and submit button is also disabled.
Is there any setting or some program code is required.
It would be great if some body can help us in this ....
many thanks in advance.
thanks -
Oracle Diagnostics not allowing to enter parameter
While running Oracle diagnostics through Front End in R12 user is not able to give the parameters for WorkPlan...and getting the below error...
Invalid (tests) selected. Please change to developer mode to get more details
Anyone have any idea why its not allowing to enter the parameter and also getting the above errorhi, was wondering if you ever resolved you issue where you're getting an error message of "Invalid test(s) selected. Please change to developer mode to get more details." We just upgraded to 12.1.3 and are experiencing the same problem.
Thanks,
Julie K. -
can someone please help? my address bar is missing. All i have in its place is a grayed out tab that will not allow me enter a URL.
What browser?
Is this a Mac Pro? -
Performance Management - Appraisal Template is not getting transported
Hello All,
Every year we create a new Appraisal template, where in we use to transport the appraisal template by right clicking on it, change status to Release first and then right click again and transport appraisal document.
But this year transporting the document is not working out. It's not showing that template in target source.
Thanks,
BhushanRun the program RHSOBJCH.
It shows infotype tables with inconsistencies like IT5025 & IT5026. Adjust/fixe these inconsistencies, with this the system automatically transport the contents in those infotypes. -
System does not allow to enter data into cube
Hello
I use BPS NW2004s. I created a layout and execute "enter plan data". I realized that system does not allow me to enter data. Why?
AlexI guess your cube is not transactional. Try to switch it to transactional
-
When making vendor down payment, not allowing to enter bank charges
Hi!
When making down payment to vendor, need to be entered bank charges. But system is not allowing for the same.
Regards,
MouryanHi,
check in FBKP whether bank charges gl assigned or not, if not, assign it.
Otherwise you can post charges by debiting to the concerned GL.
Regards,
Dharani -
Template regions not allowing most changes
Hi all
I have a strange situation where I have a template, which seems to be setup correctly, but will not display styles (ie – displays the page as though there are no stylesheets), and will not allow me paste in content into the editable regions, or apply styles, insert images etc – it just refuses!
When I do it in the code- its fine, by in the design pane - basically just typing by hand is allowed.
Other pages (non template-based), and other templates – are fine.
Any idea what it could be?
Thanks!Without seeing the code the most we can suggest is to run your page through the validator and make sure there is nothing invalid in the code that is conflicting with the template markup.
http://validator.w3.org/ -
Transaction Code FB00 is not allowing asking enter valid value
Hi Team,
when we are trying to access transaction code FB00 system is giving error message
" Enter Valid value"
Can any one suggest me what was the problem
thanks
RanamkaHi K R
HI
I have verified in FB00,
when i trying to access FB00 system gives error messge (with pop up ) "enter a valid value", in the pop up there is options "OK" and "Help"
step1: when I click on "help" system shows below mentioned message
Enter a valid value
Message number :00002
Procedure
Display the allowed values with F4 and correct your entry.
step 2: as per the above message user was execute F4 button
then system give show one Pop up Box with below content
Message Data
Appl.Area 00
messge Number :0002
when user click on F4 button he gets below option
he gets another Pop up box
Classic display
short discrption
X yes
No
This problem gets only user we are not getting this error when we access FB00
Can any guide me where is the Problem
thanks
Ranamka -
I cannot print or send a file I spend 7 hours putting together and am becoming very frustrated. I downloaded this software yesterday and can only print out the template and the data entered does not appear. Please help.
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
Maybe you are looking for
-
SAP Business One 8.82 supports replication?
I have two servers running SAP B1 PL11 in a MS SQL Server 2008 r2 standard and this two servers is running on different locations and i already set up VPN connection in this two locations so that they can reach each other. I'm planning to synchronize
-
Google search results won't open automatically new tab in firefox 6.0.2
Clicking on google search results won't open automatically new tabs in firefox 6.0.2, although it was working until today!
-
Phone 4 Unable to drag apps to relocate on another page in itunes. Can anybody help?
iPhone 4s Unable to drag apps to relocate on another page in itunes. Can anybody help with this please ?
-
"error code: -3" and "error -2093" during installation
I just got my fifth generation iPod a few days ago. When I try to install the software from the CD that came in the box, the installation program can never quite finish. It gets through iTunes but then hangs up right as it is about to finish installi
-
Hello, I've been running for quite a while with one shared itunes library on my NAS (.itl file and all) so everything is seamlessly shared by my PC laptops: playlists, cover art, music, etc. The one drawback is I can only run one instance of iTunes a