Appraisal template transporting problem

Hi Gurus!
Appraisal template transport work only between mandants of development system. It doesn't work for other systems ( QAS, productive)
Category and category Group was transported earlier.
I did number ranges for objects VA,VB,VC. So there are no such objects in QAS system.
Report RHSOBJCH was done.
What else should I do?

I have found SAP Note 1475428 - Transport appraisal Basic settings
2-Following entries must exist in T77S0:
If LSO is installed:
TRSP STOBJ 'PDST_LSO'
TRSP WFOBJ 'PDWS_LSO'
If LSO is not installed:
TRSP STOBJ 'PDST'
TRSP WFOBJ 'PDWS'
It works at last!!!

Similar Messages

Appraisal Template transport one server to another server

Hi.........
i create Appraisal Template cataloge in my server now i am transport another server....What use....plzzzzz help me
bbyeeee

ok

OSA-Template Transport Problem

Hi All,
We are trying to transport the Appraisal Template by saving in a Request along with Category Group and Category from Development to Quality. Category Group and Category has been transported but Template is missing.
Please guide us, do we need to do any other settings?
Thanks in Advance
Prasanth Dimmala

Hi Prashanth,
If i understand you correctly, both your Dev client and Q client are in separate servers and you have to transport your appraisal templates from Dev system to Q system.
I had same issue when i did my first OSA based appraisal implementation. This is because, the appraisal template is hierarchially below the category and category group. And the category group doesnt have an Object type(thats what i remember).
Solution - I manually created the category group (i think i created the category also - try this) and then transported the templates. This worked well form me.
I am sure that customer may not encourage this. But then doing this is Q system will not prompt for any transport recording even if the client settings say "Record automatically for changes".
I have tried this in PRD system also.
Hope this may help you.
Regards,
Subbu

Problem with Appraisal Template transports

Hi
I am on ECC 6.0 EHP4 and am trying to transport the appraisal transports. I am able to transport the template (VA), criteria group (VB) and Criteria (VC). But the relationship 605 - Includes Element is not getting transported. This is the only relationship which is not getting transported. The other relationship 606 is getting transported.
Also, the following infotypes are not getting transported:
5020, 5021, 5022, 5023, 5024, 5025 and 5026.
Anyone faced such a problem?
Response will be truly appreciated.
Regards
Lincoln

Hi Michael
I ran the report RHSOBJCH. And thanks for all your help.
Regards
Lincoln

Transport Category and Appraisal Template

I am trying to transport category and Appraisal Template Transport:
1) Right clicked on Category, select transport and clicked enter, it gave me the following error:
Object "R3TR" "TABL" "T77HAP_C_OTHER" is an automatically generated object and cannot be transported. All tables beginning with "M_" belong to matchcodes and can only be accessed with these
After this I need to transport Appraisal Template, Please Help

Hi,
I cannot place the error message, but...
go to transaction "oohap_category" and select the category you want to transport, then go in the menu and select transport. That should work.
Regards and Groetjes,
Maurice Hagen

URGENT: TRANSPORTING APPRAISAL TEMPLATE

Dear Friends,
I had created an appraisal template in my SandBox development client.
I then downloaded it and then uploaded it in the Golden Masters Client.
I also created a transport request at the time of saving the template in Golden Masters.
In my Testing client, I used SCC1 to transport the template and other appraisal settings from Golden Masters to the testing client.
Now, when I execute Tcode: APPCREATE in my testing client, the systems returns a message "No template found".
What might be the problem?
How can I solve it?
Please help, its urgent!!!
Regards
AXE

Hi axe
For transporting from one server to another server dont use scc1 use se09,se10 for using transport request and then try yaar definetely you will get i think so you are mirroring from one client to one client you are not transporting.
bye
naveen

Transporting Appraisal Template in Predefined Performance Management

Hi all
I have created a transport for Category and Appraisal Template through transcation PHAP_CATALOG by right clicking onto the Object and selecting Transport. After creating the transport I have successfully transported it in the QAS.
Now, in QAS I am not able to view Appraisal Template in the Appraisal Catalog (Transaction: PHAP_CATALOG) while the Category exists in the catalog. I have checked the transported Appraisal template in transaction PP01and have found that the object exists in QAS.
Please advice on, why isnt the appraisal template being displayed and linked to the required category in Appraisal Catalog Transaction: PHAP_CATALOG). And what is the corrective action required.
Regards
Imran Ali Siddiqui

Hi Imran,
Please check note 1475428, it may help you find a solution to your issue. (note also that regarding the switch they must be set in both source and target system)
Hope this help
Sarah

Problem in getting appraisal template

Hi All,
I am facing a problem in template configuration.
The appraisal template created in PHAP_CATALOG_PA is released but it is not getting created when i use transaction APPCREATE.It gives an error saying "NO APPRAISAL MODEL DEFINED IN THE SYSTEM.
I checked in spro but couldn't get any breakthrough.
So please suggest me the steps which i need to carry out in configuration.
Thanks & regards,
Ravikiran

Hi
<u>You can use either of the BADIs depending on your requirement.</u>
BAdI Definition Name Description
BBP_PGRP_ASSIGN_BADI EBP Purchasing Documents: Assign Purchasing Group(s)
BBP_PGRP_FIND        Shopping Cart: Determine Responsible Purchasing Group(s)
BBP_DOC_CHANGE_BADI
BAdI for Changing EBP Purchasing Documents
<b>Please read the Standard documetation available with them using SE18 transaction in SRM system.</b>
Which SRM version you are using ?
Hope this will help.
Please reward suitable points.
Regards
- Atul

Performance Management - Appraisal Template is not getting transported

Hello All,
Every year we create a new Appraisal template, where in we use to transport the appraisal template by right clicking on it, change status to Release first and then right click again and transport appraisal document.
But this year transporting the document is not working out. It's not showing that template in target source.
Thanks,
Bhushan

Run the program RHSOBJCH.
It shows infotype tables with inconsistencies like IT5025 & IT5026. Adjust/fixe these inconsistencies, with this the system automatically transport the contents in those infotypes.

Transporting Appraisal Template

Hi
I have created the New Appraisal Template for 2015 review in Dev. Now i need to transport the Apparisal template into QA system. Do i need to create the transport for Category as well or directly i can create the transport for Apparisal template?
Thanks,
Umesh Sharma

HI Umesh,
The below should work.
IMG>>Personnel Management>>Personnel Development>>Objective Setting and Appraisals>>Transport Template and Dependent Configuration Data
Tcode: PHAP_TRANSPORT.
Enter the Appraisal Template ... include the Category, if required and provide the TR.
Once you execute, you will get list of all Appraisal elements (VA, VB, VC), choose required ones, and include them in the TR.
Please click on the 'i' button to read more about this report (Courtesy: SAP documentation).
With this program, you can transport all of the related objects and their related data to another system (such as a live system or client) for an appraisal template (object type VA) or appraisal process ((flexible appraisal process or predefined Performance Management process); (process element object type VH)).
Hope this helps..
Kumarpal

Transport appraisal template

Hi,
has anyone used the transport option within phap_catalog for appraisal templates yet?
When I try to transport it writes an customizing request but just with entries for Infotypes 1000 1001 and 1002. But the template is not visible within the receiving system. Up- and download works fine, but not the transport option.
Transporting categories and category groups seems to work fine.
Regards

Hello Sebastian,
There is an inconsistency in your transport tables.
The report RHSOBJCH corrects the missing HR entries in the OBJS table.
This step you need to perform only once. For OSA you need to overtake *5020 up to *5026, also PAD605,606 and 607 references.
After this put the template on a new transport and everything will be transported.
Regards and Groetjes,
Maurice

OSA - Transport Appraisal Templates

Hello,
I would like to ask what is the best way of transporting an appraisal template from one client to another. I have checked a few related questions and their responses on this forum and the possible options appear to be
a. Usage of RHMOVE30, or
b. Transportor Upload / Download - posted by Maureen
I am not clear about the second option.
Can anybody clarify and suggest the best way forward?
Thanks!
Vinay

Hi Ananth,
Thanks for your quick response. I am yet to transport as most of my development has been in the sandbox so far.I did try that option earlier but got some errror messages then, but your answer reassures me so I shall try again. Thanks again

Training and Event Management - Appraisal Template

I have created an appraisal template but when I am trying to update score, it is neither creating a new APPRAISAL object nor it is getting saved. Please help me rectifying this issue.

Hi,
I donu2019t understand what you are trying ask . kindly let me know your scenario then Iu2019ll solve your problem if I could.
Prasath

OSA - ERROR while downloading \ uploading appraisal template

Hello!
May be some of you came across the same problem: when appraisal template using object Q as reference object for VB or VC is being uploading into the other client it is copied with error. The relationship 607 between objects is not ceated in the other client, so the object is not correct. Is it a standard solution
Thanks Ekaterina

Hello, once more!
I am inclined to think that lack of relationship 607 between objects VB and Q while uploading appraisal template into other client is due to a programm error but we failed to find relativa SAP Note, may be someone came across the problem?

Change the Appraisal Template in Mid of Year.

Hi All,
We want to edit the appraisal template which is being used in Production.
System is allowing to edit the template in development as there are no documents created. Once we transport the change to production what will be the implication.
Q1. Is it recommended to change the template after it is being used.
Q2. If really need to edit the template in mid of appraisal process how do we go forward.
Thanking you in advance.
Kamal R.
Edited by: Nalin Jain on Aug 5, 2009 7:41 AM

Hi Suresh,
We are on ECC 6.0 and SP 43.
We need to put some extra fields / Notes to the targets and extra sub statuses to correctly identify the condition.
But already appraisal process started and documents are created. Now we cannot either create the same documents in new template or postpone the appraisal template change to next year.
In this situation we decided to change the existing template. We want to know what will be the implications if we change the template in development and transport it to production???
Download and upload will create a new template which will not be useful for our case.
Thanking you in advance.
regards,
Kamal.

Appraisal template transporting problem

Similar Messages

Maybe you are looking for