Appraisal Workflow error

Hi All,
The requirement given to me is Appraisal workflow (with 4 levels of approval), I am using the standard workflow WS01000108,
But when the approver approves or rejects the appraisal from the inbox the workflow goes to error status, when i tried to check what is the error it says "other error".
Then i checked the method of the business object bus7026 even there it gives the same error.
Kindly help me to solve this issue.
Thanks and Regards
Balaji K.

Hi,
What is that error?
You may get error any of these
EVALUATE_AGENT_INTERVAL (Agent determination for step '0000000041' failed)
EVALUATE_AGENT_VIA_RULE (Workflow WS01000108 no. 000000007105 acti 0000000041 role 'AC01000016': No agent found)
AC01000016 (Resolution of rule AC01000016 for task TS010001 no agent found)
Thanks and Regards,
Prabhakar Dharmala
Edited by: Prabhakar Dharmala on Feb 6, 2008 12:48 PM

Similar Messages

  • Workflow Error Message: System Account - The Workflow could not set Content Approval Status

    This is the first time I try an approval workflow. I am using a template in MS Word and assigned an approval workflow to it. The approval workflow is only going to one person in this case.
    When I start the work flow the following 3 error messages show up:
    Workflow Error Message: System Account - The Workflow could not set Content Approval Status. Enable content moderation for this list and run the workflow again.
    Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the e-mail has a valid recipient.
    Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
    Thank you for your kind guidance.

    Hi,
    For the first error: Did you set Content Approval in the workflow?  If so, see if you have it in the versioning settings of the list settings.
    For the second error: double check your recipient is set up as being valid.  Did you type in the email address or is it referring to a people picker field?  also, make sure that in the workflow for the email that you actually populated it in the
    To: field.
    for the third error: I suspect that either your farm is not configured for email.  Or, this error is a knock on from the second error.  If you get the second error rectified it may clear this error.  If not then double check the email settings
    for your farm.
    Johnathan Lightfoot

  • Workflow error when submitting Employment Verification Letter in ESS Portal

    in ESS Portal, when trying to send the employment verification letter by mail I get a workflow error in ECC. Error occurs in workflow template WS01000045 (Employment and Salary Verification) task TS00408262 (PF: Find basic pay). The employee submitting the verification letter request is an active employee, has infotype 105 data in the system, and has basic pay data in the system.
    workflow log (SWI1) shows the "Basic Pay" object available and when double clicking on the object, it brings me to PA20 where I can see the Basic Pay infotype with correct data.
    Can someone help?
    note: the employee is Canadian, in case this matters.
    Tiberiu

    Have you created the resposibilities for the rule 60100010 becuase if you observe the rule it will determine the agents by using the category Agent Determination: Reponsibilities so i think you missed to create responsibilities
    for creating responsibilities [check|http://help.sap.com/saphelp_nw70/helpdata/EN/ef/3dc9469bbe11d189470000e8216659/content.htm]
    Also check that if Rule fails to determine the agents correctly then how can you [handle|http://help.sap.com/saphelp_nw70/helpdata/EN/7f/aed54c9c8d11d1894c0000e8216659/content.htm]

  • Appraisal Workflow in SAP R/3

    My clients me show them a Appraisal Workflow in SAP R/3 by using four User id's just for testing purpose. Is it possible. If yes, then how to do it. Can anyone explain me detail.
    In my client place, workflow is:
    Appraisee->Appraiser->Reviewer->HR
    Samriddhi

    Workflows are important in performance management. You set the workflow's in the status tab. There you set the target status / sub-status and the workflow to be used (appraiser or appraisee).
    The four id's, identify who will be the appraiser, part-appraiser and appraisee. Set the security / authorization's accordingly.
    Use phap_start_bsp, and use the bsp's to log in.
    Good luck

  • Appraisal workflow in UWL

    Hello all,
    I am trying to create a new view in UWL for appraisal workflows.
    My requirement is to get the Appraisal workflows into UWL. However, when appraisal item is selected from UWL it should not take us to the appraisal form, instead it should display the details view (the one which is displayed in the item preview) in pop-up.
    I created new configuration and for task 'TS12300096' in UWL configuration and selected 'UWL view detail' as action launcher when clicked on the workitem in UWL.
    When i open the UWL iView, there are no items related to appraisal task mentioned above are visible and if i delete the configuration file for the task which i've created, it appears.
    Below are the configuration files:
    1. com.appraisee_chge: configuration file for workitem registration
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd'
      >
    <UWLConfiguration version="1.0">
      <ItemTypes>
        <ItemType name="uwl.taskTS12300096.SAP_ECC_HumanResources" connector="WebFlowConnector" defaultView="uwl.taskTS12300096.SAP_ECC_HumanResources_view" defaultAction="defaultAction">
          <ItemTypeCriteria systemId="SAP_ECC_HumanResources" externalType="TS12300096" connector="WebFlowConnector"/>
          <CustomAttributes>
            <CustomAttributeSource id="ABAP_BOR" objectIdHolder="externalObjectId" objectType="APPR_DOC" cacheValidity="default">
              <Attribute name="DOCUMENTNAME" type="string" displayName="Document Name"/>
              <Attribute name="ID" type="string" displayName="Apprasisal ID"/>
            </CustomAttributeSource>
          </CustomAttributes>
          <Actions>
            <Action name="defaultAction" groupAction="" handler="UIActionHandler" returnToDetailViewAllowed="yes" launchInNewWindow="no">
              <Descriptions default="defaultAction"/>
            </Action>
          </Actions>
        </ItemType>
      </ItemTypes>
      <Views>
        <View name="uwl.taskTS12300096.SAP_ECC_HumanResources_view" selectionMode="SINGLESELECT" width="98%" supportedItemTypes="uwl.task" columnOrder="subject, isEscalated, creatorId, createdDate, priority, attachmentCount, dueDate, status, DOCUMENTNAME, ID" sortby="priority:desc, dueDate:asc, createdDate:desc" tableDesign="STANDARD" visibleRowCount="10" headerVisible="no" queryRange="undefined" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" actionRef="" refresh="300" dueDateSevere="86400000" dueDateWarning="259200000" emphasizedItems="new" displayOnlyDefinedAttributes="yes" dynamicCreationAllowed="yes" actionPosition="bottom" referenceBundle="tasks">
          <DisplayAttributes>
            <DisplayAttribute name="createdDate" type="date" width="" sortable="yes" format="medium" referenceBundle="sent_date" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
            <DisplayAttribute name="escalatedBy" type="people" width="" sortable="yes" format="default" referenceBundle="escalated_by" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
            <DisplayAttribute name="attachmentCount" type="int" width="1" sortable="yes" format="default" referenceBundle="attachments" hAlign="CENTER" vAlign="BASELINE" maxTextWidth="0" headerVisible="no"/>
            <DisplayAttribute name="statusIcon" type="image" width="1" sortable="yes" format="default" referenceBundle="status_image" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="no">
              <ImageMapping default="enum">
                <ImageMap value="EXECUTED" imageName="ico16_task_confirmed.gif" referenceBundle="confirmed_task_status"/>
                <ImageMap value="COMPLETED" imageName="ico16_task_complete.gif"/>
                <ImageMap value="INPROGRESS" imageName="ico16_task_start.gif" referenceBundle="start_task_status"/>
                <ImageMap value="enum" imageName="ico16_task_new.gif" referenceBundle="new_task_status"/>
                <ImageMap value="NEW" imageName="ico16_task_new.gif" referenceBundle="new_task_status"/>
              </ImageMapping>
            </DisplayAttribute>
            <DisplayAttribute name="substitutedFor" type="people" width="" sortable="yes" format="default" referenceBundle="substituted_for" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
            <DisplayAttribute name="dueDate" type="date" width="" sortable="yes" format="medium" referenceBundle="due_date" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
            <DisplayAttribute name="status" type="string" width="" sortable="yes" format="default" referenceBundle="status" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
            <DisplayAttribute name="isEscalated" type="image" width="10" sortable="yes" format="default" referenceBundle="data_escalate" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="no">
              <ImageMapping default="0">
                <ImageMap value="0" imageName="">
                  <Descriptions default=""/>
                </ImageMap>
                <ImageMap value="1" imageName="ico16_escalated.gif" referenceBundle="data_escalated"/>
              </ImageMapping>
            </DisplayAttribute>
            <DisplayAttribute name="creatorId" type="people" width="" sortable="yes" format="default" referenceBundle="from" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
            <DisplayAttribute name="memoCount" type="int" width="1" sortable="yes" format="default" referenceBundle="memo" hAlign="CENTER" vAlign="BASELINE" maxTextWidth="0" headerVisible="no"/>
            <DisplayAttribute name="itemTypeIcon" type="image" width="1" sortable="no" format="default" referenceBundle="item_type" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="no">
              <ImageMapping default="none">
                <ImageMap value="uwl.task" imageName="task.gif" referenceBundle="tasks"/>
                <ImageMap value="none" imageName="">
                  <Descriptions default=""/>
                </ImageMap>
                <ImageMap value="uwl.notification" imageName="notification.gif" referenceBundle="task_notifications"/>
                <ImageMap value="uwl.alert" imageName="alert.gif" referenceBundle="task_alerts"/>
              </ImageMapping>
            </DisplayAttribute>
            <DisplayAttribute name="systemId" type="string" width="10" sortable="yes" format="default" referenceBundle="system_id" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
            <DisplayAttribute name="isLaunched" type="image" width="1" sortable="no" format="default" referenceBundle="launched" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="no">
              <ImageMapping default="0">
                <ImageMap value="0" imageName="1x1.gif" referenceBundle="not_launched"/>
                <ImageMap value="1" imageName="/irj/portalapps/com.sap.portal.htmlb/mimes/common/statusicons/s_sta_ok.gif" referenceBundle="is_launched"/>
              </ImageMapping>
            </DisplayAttribute>
            <DisplayAttribute name="DOCUMENTNAME" type="string" sortable="no" maxTextWidth="0" headerVisible="yes">
              <Descriptions default="Document Name"/>
            </DisplayAttribute>
            <DisplayAttribute name="subject" type="link" width="" sortable="yes" format="default" actionRef="viewDetail" referenceBundle="subject" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
            <DisplayAttribute name="priority" type="string" width="10" sortable="yes" format="default" referenceBundle="priority" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
              <Menu>
                <MenuItem name="Low" actionRef="priorityLow" referenceBundle="menu_priority_low"/>
                <MenuItem name="Normal" actionRef="priorityNormal" referenceBundle="menu_priority_normal"/>
                <MenuItem name="High" actionRef="priorityHigh" referenceBundle="menu_priority_high"/>
                <MenuItem name="VeryHigh" actionRef="priorityVeryHigh" referenceBundle="menu_priority_v_high"/>
              </Menu>
            </DisplayAttribute>
            <DisplayAttribute name="ID" type="string" sortable="no" maxTextWidth="0" headerVisible="yes">
              <Descriptions default="Apprasisal ID"/>
            </DisplayAttribute>
          </DisplayAttributes>
          <AllowedFilters>
            <CompoundExpression logicalOperation="AND" defaultViewFilter="yes" referenceBundle="filter_display_all"/>
            <CompoundExpression logicalOperation="AND" defaultViewFilter="no" referenceBundle="filter_new">
              <Expression name="status" value="NEW" comparator="Equals"/>
            </CompoundExpression>
            <CompoundExpression logicalOperation="AND" defaultViewFilter="no" referenceBundle="filter_inprogress">
              <Expression name="status" value="INPROGRESS" comparator="Equals"/>
            </CompoundExpression>
            <CompoundExpression logicalOperation="AND" defaultViewFilter="no" referenceBundle="filter_duetoday">
              <Expression name="dueDate" value="Today" comparator="Equals"/>
            </CompoundExpression>
            <CompoundExpression logicalOperation="AND" defaultViewFilter="no" referenceBundle="filter_overdue">
              <Expression name="dueDate" value="Today" comparator="LessThan"/>
            </CompoundExpression>
          </AllowedFilters>
          <Actions>
            <Action reference="defaultGlobalWizard"/>
            <Action reference="addToNavigation"/>
            <Action reference="removeFromNavigation"/>
          </Actions>
        </View>
      </Views>
    </UWLConfiguration>
    2. com.appraisee_chge.TS12300096.wiz - What action to be triggered when an item is selected in UWL:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd'
      >
    <UWLConfiguration version="1.0">
      <ItemTypes>
        <ItemType name="uwl.taskTS12300096.SAP_ECC_HumanResources" connector="WebFlowConnector" defaultView="uwl.taskTS12300096.SAP_ECC_HumanResources_view" defaultAction="defaultAction" executionMode="default">
          <ItemTypeCriteria systemId="SAP_ECC_HumanResources" externalType="TS12300096" connector="WebFlowConnector"/>
          <CustomAttributes>
            <CustomAttributeSource id="ABAP_BOR" objectIdHolder="externalObjectId" objectType="APPR_DOC" cacheValidity="default">
              <Attribute name="DOCUMENTNAME" type="string" displayName="Document Name"/>
              <Attribute name="ID" type="string" displayName="Apprasisal ID"/>
            </CustomAttributeSource>
          </CustomAttributes>
          <Actions>
            <Action name="defaultAction" groupAction="" handler="UIActionHandler" returnToDetailViewAllowed="yes" launchInNewWindow="no">
              <Descriptions default="defaultAction"/>
            </Action>
          </Actions>
        </ItemType>
      </ItemTypes>
      <Views>
        <View name="uwl.taskTS12300096.SAP_ECC_HumanResources_view" selectionMode="SINGLESELECT" width="98%" supportedItemTypes="uwl.task" columnOrder="subject, isEscalated, creatorId, createdDate, priority, attachmentCount, dueDate, status, DOCUMENTNAME, ID" sortby="priority:desc, dueDate:asc, createdDate:desc" tableDesign="STANDARD" visibleRowCount="10" headerVisible="no" queryRange="undefined" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" actionRef="" refresh="300" dueDateSevere="86400000" dueDateWarning="259200000" emphasizedItems="new" displayOnlyDefinedAttributes="yes" dynamicCreationAllowed="yes" actionPosition="bottom" referenceBundle="tasks">
          <DisplayAttributes>
            <DisplayAttribute name="createdDate" type="date" width="" sortable="yes" format="medium" referenceBundle="sent_date" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
            <DisplayAttribute name="escalatedBy" type="people" width="" sortable="yes" format="default" referenceBundle="escalated_by" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
            <DisplayAttribute name="attachmentCount" type="int" width="1" sortable="yes" format="default" referenceBundle="attachments" hAlign="CENTER" vAlign="BASELINE" maxTextWidth="0" headerVisible="no"/>
            <DisplayAttribute name="statusIcon" type="image" width="1" sortable="yes" format="default" referenceBundle="status_image" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="no">
              <ImageMapping default="enum">
                <ImageMap value="EXECUTED" imageName="ico16_task_confirmed.gif" referenceBundle="confirmed_task_status"/>
                <ImageMap value="COMPLETED" imageName="ico16_task_complete.gif"/>
                <ImageMap value="INPROGRESS" imageName="ico16_task_start.gif" referenceBundle="start_task_status"/>
                <ImageMap value="enum" imageName="ico16_task_new.gif" referenceBundle="new_task_status"/>
                <ImageMap value="NEW" imageName="ico16_task_new.gif" referenceBundle="new_task_status"/>
              </ImageMapping>
            </DisplayAttribute>
            <DisplayAttribute name="substitutedFor" type="people" width="" sortable="yes" format="default" referenceBundle="substituted_for" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
            <DisplayAttribute name="dueDate" type="date" width="" sortable="yes" format="medium" referenceBundle="due_date" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
            <DisplayAttribute name="status" type="string" width="" sortable="yes" format="default" referenceBundle="status" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
            <DisplayAttribute name="isEscalated" type="image" width="10" sortable="yes" format="default" referenceBundle="data_escalate" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="no">
              <ImageMapping default="0">
                <ImageMap value="0" imageName="">
                  <Descriptions default=""/>
                </ImageMap>
                <ImageMap value="1" imageName="ico16_escalated.gif" referenceBundle="data_escalated"/>
              </ImageMapping>
            </DisplayAttribute>
            <DisplayAttribute name="creatorId" type="people" width="" sortable="yes" format="default" referenceBundle="from" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
            <DisplayAttribute name="memoCount" type="int" width="1" sortable="yes" format="default" referenceBundle="memo" hAlign="CENTER" vAlign="BASELINE" maxTextWidth="0" headerVisible="no"/>
            <DisplayAttribute name="itemTypeIcon" type="image" width="1" sortable="no" format="default" referenceBundle="item_type" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="no">
              <ImageMapping default="none">
                <ImageMap value="uwl.task" imageName="task.gif" referenceBundle="tasks"/>
                <ImageMap value="none" imageName="">
                  <Descriptions default=""/>
                </ImageMap>
                <ImageMap value="uwl.notification" imageName="notification.gif" referenceBundle="task_notifications"/>
                <ImageMap value="uwl.alert" imageName="alert.gif" referenceBundle="task_alerts"/>
              </ImageMapping>
            </DisplayAttribute>
            <DisplayAttribute name="systemId" type="string" width="10" sortable="yes" format="default" referenceBundle="system_id" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
            <DisplayAttribute name="isLaunched" type="image" width="1" sortable="no" format="default" referenceBundle="launched" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="no">
              <ImageMapping default="0">
                <ImageMap value="0" imageName="1x1.gif" referenceBundle="not_launched"/>
                <ImageMap value="1" imageName="/irj/portalapps/com.sap.portal.htmlb/mimes/common/statusicons/s_sta_ok.gif" referenceBundle="is_launched"/>
              </ImageMapping>
            </DisplayAttribute>
            <DisplayAttribute name="DOCUMENTNAME" type="string" sortable="no" maxTextWidth="0" headerVisible="yes">
              <Descriptions default="Document Name"/>
            </DisplayAttribute>
            <DisplayAttribute name="subject" type="link" width="" sortable="yes" format="default" actionRef="viewDetail" referenceBundle="subject" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
            <DisplayAttribute name="priority" type="string" width="10" sortable="yes" format="default" referenceBundle="priority" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
              <Menu>
                <MenuItem name="Low" actionRef="priorityLow" referenceBundle="menu_priority_low"/>
                <MenuItem name="Normal" actionRef="priorityNormal" referenceBundle="menu_priority_normal"/>
                <MenuItem name="High" actionRef="priorityHigh" referenceBundle="menu_priority_high"/>
                <MenuItem name="VeryHigh" actionRef="priorityVeryHigh" referenceBundle="menu_priority_v_high"/>
              </Menu>
            </DisplayAttribute>
            <DisplayAttribute name="ID" type="string" sortable="no" maxTextWidth="0" headerVisible="yes">
              <Descriptions default="Apprasisal ID"/>
            </DisplayAttribute>
          </DisplayAttributes>
          <AllowedFilters>
            <CompoundExpression logicalOperation="AND" defaultViewFilter="yes" referenceBundle="filter_display_all"/>
            <CompoundExpression logicalOperation="AND" defaultViewFilter="no" referenceBundle="filter_new">
              <Expression name="status" value="NEW" comparator="Equals"/>
            </CompoundExpression>
            <CompoundExpression logicalOperation="AND" defaultViewFilter="no" referenceBundle="filter_inprogress">
              <Expression name="status" value="INPROGRESS" comparator="Equals"/>
            </CompoundExpression>
            <CompoundExpression logicalOperation="AND" defaultViewFilter="no" referenceBundle="filter_duetoday">
              <Expression name="dueDate" value="Today" comparator="Equals"/>
            </CompoundExpression>
            <CompoundExpression logicalOperation="AND" defaultViewFilter="no" referenceBundle="filter_overdue">
              <Expression name="dueDate" value="Today" comparator="LessThan"/>
            </CompoundExpression>
          </AllowedFilters>
          <Actions>
            <Action reference="defaultGlobalWizard"/>
            <Action reference="addToNavigation"/>
            <Action reference="removeFromNavigation"/>
          </Actions>
        </View>
      </Views>
    </UWLConfiguration>
    Any suggestions or inputs appreciated.
    Thanks
    Karthik
    Edited by: Karthik on Feb 21, 2008 1:21 AM

    Issue Resolved

  • Service Manager 2012 R2 - Workflow Error - Event ID 4513

    Hi,
    We started to suffer a Workflow error in Service Manager 2012 R2 2 weeks ago. We noticed through the failure of some SLOs not being applied on Work Items. The error is the follow:
    Log Name:      Operations Manager
    Source:        HealthService
    Date:          13/03/2014 12:10:00
    Event ID:      4513
    Task Category: Health Service
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      XXX-XXX-XXX
    Description:
    The callback method DeliverDataToModule failed with exception "'­', hexadecimal value 0x1F, is an invalid character." in the module Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowWriteAction.
    Workflow: WorkItem_SetFirstAssingedTo_RelationhsipAdd_Rule
    Instance: Destino do Fluxo de Trabalho (interno)
    Instance ID: {383E578B-E1C9-2802-0047-815853405778}
    Management Group: CTRPROD
    Full Exception Text:
     System.ArgumentException: '­', hexadecimal value 0x1F, is an invalid character.
       at System.Xml.XmlEncodedRawTextWriter.InvalidXmlChar(Int32 ch, Char* pDst, Boolean entitize)
       at System.Xml.XmlEncodedRawTextWriter.WriteElementTextBlock(Char* pSrc, Char* pSrcEnd)
       at System.Xml.XmlEncodedRawTextWriter.WriteString(String text)
       at System.Xml.XmlWellFormedWriter.WriteValue(String value)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.SerializeAndVerifyType(DataContract dataContract, XmlWriterDelegator xmlWriter, Object obj, Boolean verifyKnownType, RuntimeTypeHandle declaredTypeHandle, Type declaredType)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.SerializeWithXsiType(XmlWriterDelegator xmlWriter, Object obj, RuntimeTypeHandle objectTypeHandle, Type objectType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle, Type
    declaredType)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerialize(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerializeReference(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
       at WriteArrayOfanyTypeToXml(XmlWriterDelegator , Object , XmlObjectSerializerWriteContext , CollectionDataContract )
       at System.Runtime.Serialization.CollectionDataContract.WriteXmlValue(XmlWriterDelegator xmlWriter, Object obj, XmlObjectSerializerWriteContext context)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerialize(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerializeReference(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
       at WriteResultToXml(XmlWriterDelegator , Object , XmlObjectSerializerWriteContext , ClassDataContract )
       at System.Runtime.Serialization.ClassDataContract.WriteXmlValue(XmlWriterDelegator xmlWriter, Object obj, XmlObjectSerializerWriteContext context)
       at System.Runtime.Serialization.DataContractSerializer.InternalWriteObjectContent(XmlWriterDelegator writer, Object graph, DataContractResolver dataContractResolver)
       at System.Runtime.Serialization.DataContractSerializer.InternalWriteObject(XmlWriterDelegator writer, Object graph, DataContractResolver dataContractResolver)
       at System.Runtime.Serialization.XmlObjectSerializer.WriteObjectHandleExceptions(XmlWriterDelegator writer, Object graph, DataContractResolver dataContractResolver)
       at System.Runtime.Serialization.DataContractSerializer.WriteObject(XmlWriter writer, Object graph)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.DataItemSubscription.GenerateItemXml(XmlWriter writer)
       at Microsoft.EnterpriseManagement.HealthService.DataItemBase.GenerateItemXmlInternal()
       at Microsoft.EnterpriseManagement.HealthService.DataItemBase.GetItemXml()
       at Microsoft.EnterpriseManagement.HealthService.DataItemBase.QueryItem(XPathExpression xpathQuery)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.TokenReplaceWindowsWorkflowTaskParameterValue.TokenResolver(String tokenValue)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.TokenResolver.RegexMatchEvaluator(Match m)
       at System.Text.RegularExpressions.RegexReplacement.Replace(MatchEvaluator evaluator, Regex regex, String input, Int32 count, Int32 startat)
       at System.Text.RegularExpressions.Regex.Replace(String input, MatchEvaluator evaluator)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.TokenResolver.Resolve(String str)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.TokenReplaceWindowsWorkflowTaskParameterValue.GenerateWindowsWorkflowTaskParameterValue(String elementTemplate)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowTaskParameterValue.Resolve(TokenReplaceWindowsWorkflowTaskParameterValue resolver)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowTaskArrayParameter.Resolve(TokenReplaceWindowsWorkflowTaskParameterValue resolver)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowTask.Resolve(DataItemBase[] dataItems)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowWriteAction.ProcessDataItems(DataItemBase[] dataItems)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowWriteAction.OnNewDataItems(DataItemBase[] dataItems, Boolean isLogicalSet, DataItemAcknowledgementCallback acknowledgedCallback, Object acknowledgedState, DataItemProcessingCompleteCallback
    completionCallback, Object completionState)
       at Microsoft.EnterpriseManagement.HealthService.Internal.InputPortCallbacks.InputStreamBatchedAcknowledgedCallbackHandler`1.InputPortCallbackImplementation(DataItemBase[] dataItems, Boolean isBatchLogicalSet, DataItemAcknowledgementCallback
    acknowledgementCallback, DataItemProcessingCompleteCallback completionCallback)
       at Microsoft.EnterpriseManagement.HealthService.Internal.ModuleContainer`1.Microsoft.EnterpriseManagement.HealthService.Internal.IModuleContainer.DeliverDataToModule(UInt32 inputPortNumber, DataItemBase[] dataItems, Boolean isBatchLogicalSet,
    DataItemAcknowledgementCallback acknowledgementCallback, DataItemProcessingCompleteCallback completionCallback)
       at Microsoft.EnterpriseManagement.HealthService.Internal.ManagedHostHelper.Microsoft.EnterpriseManagement.HealthService.Internal.IManagedHostHelper.DeliverBatchedDataToModule(UInt32 inputPortNumber, Object moduleInputReference, DataItemBase[]
    dataItems, UInt32 dataItemCount, Boolean isBatchLogicalSet, Object completionReference)
    Event Xml:
    <Event xmlns='http://schemas.microsoft.com/win/2004/08/events/event'><System><Provider Name='HealthService'/><EventID Qualifiers='49152'>4513</EventID><Level>2</Level><Task>1</Task><Keywords>0x80000000000000</Keywords><TimeCreated
    SystemTime='2014-03-13T15:10:00.000000000Z'/><EventRecordID>4953905</EventRecordID><Channel>Operations Manager</Channel><Computer>CTR-SCSM-MS01.sp.local</Computer><Security/></System><EventData><Data>CTRPROD</Data><Data>WorkItem_SetFirstAssingedTo_RelationhsipAdd_Rule</Data><Data>Destino
    do Fluxo de Trabalho (interno)</Data><Data>{383E578B-E1C9-2802-0047-815853405778}</Data><Data>DeliverDataToModule</Data><Data>'­', hexadecimal value 0x1F, is an invalid character.</Data><Data>Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowWriteAction</Data><Data>System.ArgumentException:
    '­', hexadecimal value 0x1F, is an invalid character.
       at System.Xml.XmlEncodedRawTextWriter.InvalidXmlChar(Int32 ch, Char* pDst, Boolean entitize)
       at System.Xml.XmlEncodedRawTextWriter.WriteElementTextBlock(Char* pSrc, Char* pSrcEnd)
       at System.Xml.XmlEncodedRawTextWriter.WriteString(String text)
       at System.Xml.XmlWellFormedWriter.WriteValue(String value)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.SerializeAndVerifyType(DataContract dataContract, XmlWriterDelegator xmlWriter, Object obj, Boolean verifyKnownType, RuntimeTypeHandle declaredTypeHandle, Type declaredType)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.SerializeWithXsiType(XmlWriterDelegator xmlWriter, Object obj, RuntimeTypeHandle objectTypeHandle, Type objectType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle, Type
    declaredType)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerialize(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerializeReference(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
       at WriteArrayOfanyTypeToXml(XmlWriterDelegator , Object , XmlObjectSerializerWriteContext , CollectionDataContract )
       at System.Runtime.Serialization.CollectionDataContract.WriteXmlValue(XmlWriterDelegator xmlWriter, Object obj, XmlObjectSerializerWriteContext context)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerialize(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
       at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerializeReference(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
       at WriteResultToXml(XmlWriterDelegator , Object , XmlObjectSerializerWriteContext , ClassDataContract )
       at System.Runtime.Serialization.ClassDataContract.WriteXmlValue(XmlWriterDelegator xmlWriter, Object obj, XmlObjectSerializerWriteContext context)
       at System.Runtime.Serialization.DataContractSerializer.InternalWriteObjectContent(XmlWriterDelegator writer, Object graph, DataContractResolver dataContractResolver)
       at System.Runtime.Serialization.DataContractSerializer.InternalWriteObject(XmlWriterDelegator writer, Object graph, DataContractResolver dataContractResolver)
       at System.Runtime.Serialization.XmlObjectSerializer.WriteObjectHandleExceptions(XmlWriterDelegator writer, Object graph, DataContractResolver dataContractResolver)
       at System.Runtime.Serialization.DataContractSerializer.WriteObject(XmlWriter writer, Object graph)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.DataItemSubscription.GenerateItemXml(XmlWriter writer)
       at Microsoft.EnterpriseManagement.HealthService.DataItemBase.GenerateItemXmlInternal()
       at Microsoft.EnterpriseManagement.HealthService.DataItemBase.GetItemXml()
       at Microsoft.EnterpriseManagement.HealthService.DataItemBase.QueryItem(XPathExpression xpathQuery)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.TokenReplaceWindowsWorkflowTaskParameterValue.TokenResolver(String tokenValue)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.TokenResolver.RegexMatchEvaluator(Match m)
       at System.Text.RegularExpressions.RegexReplacement.Replace(MatchEvaluator evaluator, Regex regex, String input, Int32 count, Int32 startat)
       at System.Text.RegularExpressions.Regex.Replace(String input, MatchEvaluator evaluator)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.TokenResolver.Resolve(String str)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.TokenReplaceWindowsWorkflowTaskParameterValue.GenerateWindowsWorkflowTaskParameterValue(String elementTemplate)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowTaskParameterValue.Resolve(TokenReplaceWindowsWorkflowTaskParameterValue resolver)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowTaskArrayParameter.Resolve(TokenReplaceWindowsWorkflowTaskParameterValue resolver)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowTask.Resolve(DataItemBase[] dataItems)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowWriteAction.ProcessDataItems(DataItemBase[] dataItems)
       at Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowWriteAction.OnNewDataItems(DataItemBase[] dataItems, Boolean isLogicalSet, DataItemAcknowledgementCallback acknowledgedCallback, Object acknowledgedState, DataItemProcessingCompleteCallback
    completionCallback, Object completionState)
       at Microsoft.EnterpriseManagement.HealthService.Internal.InputPortCallbacks.InputStreamBatchedAcknowledgedCallbackHandler`1.InputPortCallbackImplementation(DataItemBase[] dataItems, Boolean isBatchLogicalSet, DataItemAcknowledgementCallback
    acknowledgementCallback, DataItemProcessingCompleteCallback completionCallback)
       at Microsoft.EnterpriseManagement.HealthService.Internal.ModuleContainer`1.Microsoft.EnterpriseManagement.HealthService.Internal.IModuleContainer.DeliverDataToModule(UInt32 inputPortNumber, DataItemBase[] dataItems, Boolean isBatchLogicalSet,
    DataItemAcknowledgementCallback acknowledgementCallback, DataItemProcessingCompleteCallback completionCallback)
       at Microsoft.EnterpriseManagement.HealthService.Internal.ManagedHostHelper.Microsoft.EnterpriseManagement.HealthService.Internal.IManagedHostHelper.DeliverBatchedDataToModule(UInt32 inputPortNumber, Object moduleInputReference, DataItemBase[]
    dataItems, UInt32 dataItemCount, Boolean isBatchLogicalSet, Object completionReference)</Data></EventData></Event>
    Has anybody faced the same problem?
    Thanks
    Thiago

    Hi Thomas,
    Thanks for your response. I understood your comments but, the system was running fine for about 3 months. No changes have been applied during this time and suddenly this error pops out.
    I opened a case with MS Support, but they applied a WA which does not resolve our problem, because the error appears after a few days later after the WA procedure.
    The WA is just a watermark reset using this SQL query:
    DECLARE @MaxTransactionId Int, @RuleID uniqueidentifier
    SET @RuleID = '' -- <-- SET THIS TO YOUR RULE ID!!!
    SET @MaxTransactionId = (SELECT MAX(EntityTransactionLogId) FROM EntityTransactionLog) 
    UPDATE CmdbInstanceSubscriptionState
    SET State = @MaxTransactionId
    WHERE RuleId = @RuleID
    The problem with this WA is that all Work Items affected by the problem - workflows not being applied - do not get the information we need to identify all the SLA's. The system just "forget" them and moves on.
    Cheers,
    Thiago

  • Sales Agreement workflow errored on 3205: is not a valid role or user name.

    Hi experts,
    We're currently on EBS R12.1.2 We're running into an issue that seems like a very general issue that other businesses would have encountered before. We have a business user who creates most of sales agreements. When this business user left the company, we set active end date on the particular userid. Now, when we go into these sales agreements originally created by this particular userid, and put in the expiration date to expire these sales agreement. We're seeing the sales agreement workflow erroring out in the pre-notification workflow email with error 3205: is not a valid role or user name.
    It seems to be this is a very typical business scenario. If you have encountered this problem, please share how you resolved this issue within your oracle apps environment.
    Thank you in advance for your help,
    Jennifer

    Hello,
    We have the same problem in 11.5.10.2. If we want use this blanket sales agreement I have to skipped this notification by sysadmin and after this I can extend end date and another user can use this BSA.
    Look at Extend The Expiration Date For Closed Non-Active Expired BSA Blanket Sales Agreement [ID 1394888.1]     
    Regards,
    Luko

  • Modifying workflow error message

    Dear all,
    i have a requirement where i need to modify the workflow error and i need to enter additional information like customer number and customer purchase order number in workflow error message and error description during inbound Idoc processing.
    can anybody explain me how it can be achieved?
    thanking you in anticipation
    Ashvin Patel
    Edited by: Ashvin Patel on Dec 25, 2008 8:09 AM

    Dear Krupa,
    Thnx for the reply, but can you pls elaborate it. as i need to write a FS for this but i don't know how to put this in technical terms.
    Regards
    Ashvin Patel

  • Appraisal Workflow - Screen without any values during Approval

    Hi,
    I am working on Appraisal workflow. When a manager clicks on a work item (via MSS portal) to approve/reject, he is getting a screen without any values.
    Am I missing any configuration?
    Please help.
    Thanks and Regards
    Pras

    Hi Friends,
    This issue has been resolved. It was an authorization issue.
    Thanks and Kind Regards
    Pras

  • Workflow error in ChaRM using Group Approval

    Hi,
    I am using the Group Approval in ChaRM's requests for change transactions, as explained in detail in Michael Vollmer's blogpostNew ChaRM Feature with SP 10: Enhanced Approval Procedure Functions
    I am also using the workflow crm_rfc_aprv (WS17100016), which sends out workflow tasks during the approval procedure.
    Since I have assigned organizational units to my approval procedure, I always receive an e-mail from the Workflow User with title "Workflow 12345 set to status ERROR" for every ticket.
    This is because somewhere in the code behind the workflow, a user is searched based on the business partner in the approval step. But an Organizational Unit is never linked to a user, you cannot assign the BP Role "employee" to an organizational unit.
    It would be nice if the workflow could send workflow tasks to all the users assigned in the organizational model to the organizational unit. But currently, I am most concerned with getting rid of the workflow error e-mails. I really don't want to get an e-mail for each and every ticket.
    Does anyone know if there is a way to solve this? Maybe some way to link an organizational unit to a (dummy) user anyway?

    Hi Karthik,
    Yes, my organizational model is maintained.
    There are three BP's + Users assigned to the organizational unit.
    The SP10 Enhanced Approval Procedure completely works, those three users are able to set the approval for the "Center of Competence" organizational unit to "approved" in the RfC ticket.
    However, the workflow behind it never goes looking in the organizational model. It just sees "business partner 632", and checks only the data of BP 632, and doesn't find a user on it. So the workflow goes into error, and sends a mail about it to me...
    For approval step 1 everything goes as normal, there is a specific person assigned to the step, the workflow finds a user on the person's business partner, and sends a workflow task / mail to that user.
    Below are screenshots of tx PPOMA_CRM, the approval block in the RfC ticket, and the correct and error mail as seen in the tx SOST list.
    Kind regards,
    Joyca

  • Workflow error when sending Verification Letter request by mail

    in ESS Portal, when trying to send the employment verification letter by mail I get a workflow error in ECC. Error occurs in workflow template WS01000045 (Employment and Salary Verification) task TS00408262 (PF: Find basic pay). The employee submitting the verification letter request is an active employee, has infotype 105 data in the system, and has basic pay data in the system.
    workflow log (SWI1) shows the "Basic Pay" object available and when double clicking on the object, it brings me to PA20 where I can see the Basic Pay infotype with correct data.
    Can someone help?
    note: the employee is Canadian, in case this matters.
    Tiberiu

    Once you are satisfied that the origin is satisfactory it is best to select the option worded something like - always accept from this site.
    In my experience it is always more reliable to use the SMTP server which matches your From name. The one exception is running your own SMTP server on a fixed IP.
    Check that your Mail SMTP settings have the correct, name, password, security and port.

  • Appraisal Workflow - Item not completed

    Hi,
    After performing Approved or Reject in MSS for Appraisal Workflow, the task are not completed or removed from the UWL of the user. If we do the same from R/3 the workitem gets completed. I checked the workflow task and it always ask for 'Confirm End of Process'.
    Any idea to how to do that?
    Thanks,
    SP

    Hi SP,
    Please also see BWF note: 902541.  Also, please be aware that the workitems will not leave automatically as there is no real time refresh in the Universal Worklist.  The quickest time that it will take will be 60 seconds.  If you manually refresh do the workitems leave the inbox?  Please check your parameters as mentioned in this wiki page:
    http://wiki.sdn.sap.com/wiki/display/BPX/UniversalWorklistParameterConfigurationforOptimalPerformance
    Beth Maben
    EP - Senior Support Consultant II
    AGS Primary Support
    Global Support Centre Ireland
    Please see the UWL Wiki @
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq  ***

  • Workflow error from purchase requisition screen

    How can I check workflow error / status / information from purchase requisition screen. Is there any other transaction ?

    Goto SWI6 or SWI14 and enter the object type (standard is BUS2105 for PR) but in your organization if custom Object type used then enter that and execute you will see the list here
    enter the selection period

  • SRM Workflow error-  Error' 9' when calling service ' SO_OBJECT_SEND'

    Hi Team,
    We are facing problem with SAP SRM Workflow error-  Error' 9' when calling service ' SO_OBJECT_SEND' .
    Due to this WI is not going to Approver/Requester INBOX and unable to process that WI.
    Please advice .
    Greatly Appreciated for Help.
    Regards
    CK

    Hi,
    Not sure what '9' is, the exceptions called by the SO_OBJECT_SEND function are as follows:
    EXCEPTIONS
                   ACTIVE_USER_NOT_EXIST      = 35
                   COMMUNICATION_FAILURE      = 71
                   COMPONENT_NOT_AVAILABLE    = 01
                   FOLDER_NOT_EXIST           = 06
                   FOLDER_NO_AUTHORIZATION    = 05
                   FORWARDER_NOT_EXIST        = 08
                   NOTE_NOT_EXIST             = 45
                   OBJECT_NOT_EXIST           = 13
                   OBJECT_NOT_SENT            = 15
                   OBJECT_NO_AUTHORIZATION    = 13
                   OBJECT_TYPE_NOT_EXIST      = 17
                   OPERATION_NO_AUTHORIZATION = 21
                   OWNER_NOT_EXIST            = 22
                   PARAMETER_ERROR            = 23
                   SUBSTITUTE_NOT_ACTIVE      = 31
                   SUBSTITUTE_NOT_DEFINED     = 32
                   SYSTEM_FAILURE             = 72
                   TOO_MUCH_RECEIVERS         = 73
                   USER_NOT_EXIST             = 46
                   OTHERS                     = 1000.
    Regards,
    Jason

  • Three State Approval Workflow Error

    I have created one Task List. Add Three state approval workflow to it.
    When i created New Task. It started workflow. But after couple of minutes it throws error "Error Occured". How to find error.
    Please let me know. If you know any resolution for workflow error then also let me know.
    Thanks in advance.

    Hi,
    Please go to the task list settings page, click Assigned to column and check "No" for "Allow multiple selections", then check whether the issue still exists or not.
    Here are two threads for your reference:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/9231b505-7e78-4e98-b6c0-02ad85b247c3/error-occured-three-state-workflow-multiple-selection?forum=sharepointcustomizationlegacy
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/5a9f37ea-40b4-494b-b4af-db15be9d91ff/error-occured-three-state-workflow?forum=sharepointgenerallegacy
    Best Regards
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

Maybe you are looking for

  • Hiding a row based on the the drill down via table interfaces

    I have a requirement to hide a particular row (key field) of a table if a characterisitic (0PLANT) is included in the table. I have managed to hide the key field via the table interface but need to know how I would see if the characteristic is drille

  • Actual price of revenue in reporting not hitting

    Hello I have done the milestone billing and also created the billing plan in WBS element for the created milestone under the same WBS element as "down payments" and have done the billing for these amount by assigning in sales order by confirming the

  • FUS Image version for Cisco 3702 AP

    Dear Team, What is the minimum version of Field Recovery image in WLC for Cisco 3702 series ..? I have 6.0.182.0 version.. Is that supported..? Note: I already upgraded WLC code to 7.6.120.0.

  • Help with toplink queries

    Hello, I really hope that someone has encountered this problem before. I have a table that is keyed by following three Varchar Keys: PURPOSE_NAME VARCHAR GROUP_NAME VARCHAR IV_TYPE VARCHAR I have a class that has only three attributes defined, namely

  • A script to take multiple photos at different expo...

    Alrighty There People! Okay, so I'm using an N95. What I want to achieve is to take four or five different shots of the same image, but at different exposures, and then merge them to create an HDR image. The merging and creating I can do fine on my P