Appraisals don't appear in infotype 0025

Hi experts,
I Have implemented objective setting and appraisals and creted appraisals for emplyees,
and in infotype -0025 i can not see the appraisals where appraiser.
the appraisals where appraisee are displayed.
Haow can I see them???

Hi,
Please make sure that the switch PLOGI APPRA in table T77S0 (via AM30 transaction) has value 1.
Regards,
Dilek

Similar Messages

  • How to upload data in infotype 0025 (Appraisals)

    I want to make an upload program for infotype 0025 (Appraisals). The program will upload the data in 'Potentials' but I cannot make a recording work in it. Each time the system posts the data into next row and recording does not work since the line number is fixed in recording. There is no + sign to add a row at the top. Can someone please tell me a way to do this or if there is a Function Module that can upload data into infotype 0025.
    Thanks

    Dear Sohaib,
    This upload could not be performed by BDC recording. You will have to make use of around four Appraisal BAPI's to create an entry in Infotype 25(Appraisals). I had the same scenario of uploading appraisal data here at NBP(National Bank of Pakistan). Here is the link for the article i wrote,covering this topic in depth,along with the complete solution:
    http://scn.sap.com/docs/DOC-32084
    If you like this article,kindly flag it as a 'Correct Answer.
    Regards,
    Fahad

  • Data Retrieval from infotype 0025

    hi all,
    I want to read some data from infotype in my abap program. In infotype 0025, in the tab 'Appraisals where Appraisee' , when I click on the first link, say 'Supervisor appraisal', I get a screen where there is a table . I want to select the value of 'HAP_S_DYNP_3100_TB-COL_01_VALUE_TXT', but HAP_S_DYNP_3100_TB is a structure and COL_01_VALUE_TXT' is a field of a table control, so how to pick up this kind of data in my program???? I tried RHPA_APPRAISEES_APP_READ but this function does not give me any results.
    Thanks
    yogesh

    Hi Yogesh,
    Make use of below FMs to fetch the data from IT0024 -
    * Fill t_pernr_tmp with employees (PERNRs) as follows -
          t_pernr_tmp-plvar = '01'.
          t_pernr_tmp-otype = 'P'.
          t_pernr_tmp-sobid = '00000001'.  "give employee number here
          append t_pernr_tmp.
    *     READ QUALIFICATION
          CALL FUNCTION 'RHPP_Q_PROFILE_READ'
            EXPORTING
              begda            = w_low  "provide date in sy-datum format
              endda            = w_high "provide date in sy-datum format
              with_stext       = c_x
              with_qk_info     = c_x
            TABLES
              OBJECTS    = t_pernr_tmp
              profile          = t_qual_data
            EXCEPTIONS
              no_authority     = 1
              wrong_otype      = 2
              object_not_found = 3
              undefined        = 4
              OTHERS           = 5.
    * here t_qual_data will have qualification  data.
    *after that make use of FM 'RHPE_QCAT_BRANCH_READ_UP' and the *t_qual_data table to read the branches of qualification data.

  • Picking up data from infotype 0025

    hi all,
    I want to read some data from infotype in my abap program. In infotype 0025, in the tab 'Appraisals where Appraisee' ,  when I click on the first link, say 'Supervisor appraisal', I get a screen where there is a table . I want to select the value of 'HAP_S_DYNP_3100_TB-COL_01_VALUE_TXT', but HAP_S_DYNP_3100_TB is a structure and COL_01_VALUE_TXT' is a field of a table control, so how to pick up this kind of data in my program???? Please suggest some sample code for that.
    Thanks
    Ribhu

    hi all,
    I want to read some data from infotype in my abap program. In infotype 0025, in the tab 'Appraisals where Appraisee' ,  when I click on the first link, say 'Supervisor appraisal', I get a screen where there is a table . I want to select the value of 'HAP_S_DYNP_3100_TB-COL_01_VALUE_TXT', but HAP_S_DYNP_3100_TB is a structure and COL_01_VALUE_TXT' is a field of a table control, so how to pick up this kind of data in my program???? Please suggest some sample code for that.
    Thanks
    Ribhu

  • DA amount not appearing in infotype 008 & in Remuneration Statement

    I am learning Payroll-India on IDES 6.0. I have configured Dearness Allowance using "Incremental CPI slab based Calculation" method (not yet sure how I did it! will try to figure out!). I executed the "DA Report" for a personnel number and the VDA amount is computed there (it shows Rs. 1200). After this I used the "Start Payroll" to run the payroll for the personnel number. But the VDA amount is not appearing in Infotype 0008 for the personnel number. However, the text for the VDA wage type "Variable DA") is appearing. In the remuneration statement, neither the wage type text nor the amount is appearing ( I have done the necessary configuration to include the wage type in window W1).
    Please guide me on what could be going wrong.

    Hi,
    Now the VDA amount is appearing in infotype 0008 of the personnel number. I ran the DA batch program for the personnel number and then uploaded using sm35.
    After this, I started the payroll run for this personnel number, which was successful. But in the Remuneration Statement, neither the VDA text nor the VDA amount is appearing (I have done the necessary creation & transfer of the VDA wage type in Remuneration Statement).
    Please guide me.
    I have a related query. For the VDA wage type, I have set INVAL B in the wage type characteristics. Is it okay? If so, how should I create the entries for VDA wage type in the screen "Maintain Valuation of Base Wage Types" & in the screen "Calculate Eligibility for RAP's"?

  • Image Processing and machine vision don't appear in Function Palette

    Hi,
    I have problem and I can't solve it
    Image Processing and machine vision don't appear in Function Palette, Although I set up NI imaq and NI Vision Acquisition Why??
    Anyone can help me?
    Solved!
    Go to Solution.

    If the image is already a Grayscale U8 image you would just have to save it to a bitmap file using the IMAQ WriteFile VI. If not, use the IMAQ Cast Image VI to convert it to a Grayscale U8 and then save it.
    Also, it would probably be better to create a new thread for questions like these.
    Cameron T
    Applications Engineer
    National Instruments

  • Some options don't appear in MAX

    I have an Agilent 86142A OSA connected via GPIB-USB-HS cable to my PC. MAX recognizes it in the tree, but a lot of options (like self-test, calibrate) don't appear. I'm new in MAX, so I'm not sure whether this is acceptable or not. Have I made some error in installing the device, or do some options simply not show up for particular devices? I've attached an image of MAX in this situation.
    If indeed the device is installed fine, how does one perform a test to see if the connection is good if the Self-Test icons don't appear?
    Please let me know if it seems the device has been detected properly and all is well.
    Thanks!
    Attachments:
    MAXimage.JPG ‏98 KB

    Everything looks find. You are not supposed to have options for self-test or calibrate. Those would only be for NI's DAQ cards.

  • Some images don't appear in iPhone, but do on desktop.

    Can someone download this PDF and let me know why the jpg images appear fine when viewing with desktop browser, but some images in the same document don't appear when viewing in Safari on the iPhone? Vector artwork and text show fine. Shows white space where JPGs should be.
    Specifically, pages 1 and 4:
    http://www.teamassociated.com/pdf/cars_and_trucks/TC6/Factory_Team/tc6ft_manual-mobile-4rg b.pdf

    I just heard about this day before yesterday at the InDesign Print and ePublishing Conference in Washington, DC. When using display on an iOS device JPEG 2000 is not supported. There are two flavors of JPEG: JPEG & JPEG 2000.
    Here's a Wikipedia article about JPEG 2000:
    http://en.wikipedia.org/wiki/JPEG_2000
    If I go to page 1 and 4 in your PDF and use Output Preview in Acrobat Pro (in Acro 9 > Advanced Print Production > Output Preview). Click on the Object Inspector tab and click on the image. It uses a JPEG 2000 filter.
    Since I don't know how the image was created and saved, I'll leave it to you to resave it as normal JPEG.

  • Some USBs don't appear in Finder. They appear in Disk Utilities so how do I get them to appear in Finder?

    Some flash drives/USBs don't appear in Finder. But they appear in Disk Utilities so how do I get them to appear in Finder?

    If you've never used them before (they are new) then they are not formatted for Macs.
    Drive Partition and Format
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    When you want to remove an external device you must Eject it:
    First, select the Desktop icon of the external disk. CTRL- or RIGHT-click and select Eject from the context menu.

  • Layout option doesn't work in Easy Print VI panel, controls on tabs don't appear

    Found two problems with the Report Generation VIs:
    1) In the (Report Generation) Easy Print VI Panel or Documentation.vi, the Layout options don't work (dug down into the sub-VI's and found that they are not connected to anything).
    2) If you have controls or indicators on a Tab Control, and try to use the Easy Print VI Panel or Documentation.vi with the option to include controls in the report, they don't appear. The only controls/indicators that do appear are the ones that are displayed on all of the tabs (ie, create an control and move it on top of the tab control so that it appears on every page).  There is a sub-VI (Expand_control_ref_with_nested_controls.vi) that is called to handle nested controls (ie, clusters, arrays,etc...) but it should have a case to handle tab controls.
    Solved!
    Go to Solution.

    Hey Sajosie,
    Digging into the Sub-VI's you are correct in saying that the Layout Options user input is not connected to anything for most cases. However, In the default case of "Quick Print" the Layout Options are used to modify the layout of the report. In the help for this VI, it mentions that this input is ignored for "Standard Reports" and "HTML" report options. However, it does not mention that this ignoring of the Layout Options is expected for "Word" or "Excel" reports.
    In terms of including controls and indicators in the report that appear on tab controls, I can make a product suggestion to make this sort of front panel design more compatible with the Easy Print VI Panel or Documentation.
    Hope this helps.
    -Ben
    WaterlooLabs

  • Email notifications no longer don't appear on iphone 4s - iOS 7.0.4 locked mode.

    Email notifications no longer don't appear on iphone 4s - iOS 7.0.4 locked mode.

    Thank you, razmee209!  I must have checked everything 1,000,000 times, but when I just rechecked settings - notification - mail, I now see that Alerts -- both Show in Notification Center and Show on Lock Screen -- were turned off.  Can't believe I missed that, so THANK YOU!

  • .m4r files sync but don't appear AND outlook contacts won't add to iphone?

    hi guys,
    This is my first post, made just a day after I got my iphone.
    Now don't get me wrong, i love the iphone, but i'm worried i might have to send it back due to 2 glitches:
    1) I exported all my contacts onto my computer from my old k800i, then imported them into contacts on outlook. Then I synced my iphone to outlook through itunes and it appears to be doing something on the itunes bar only for me to open my phone when it's done and the contact list is empty. It's synced the calender and itunes music thought.
    2) I sent some ringtones to my friend who has a mac (I have a PC) and he changed them to .m4r files on that garage program on the mac, then he sent them back, i dragged them into the ringtone folder and they appeared. I went on itunes and they appear in the iphone tone menu, i sync with the actual phone and after saying it's done they don't appear in the tone menu on the phone.
    That's 2 annoying things, do I need to send it back?
    Any help would be great, thanks for your time.

    Hi,
    Please follow the steps below to make sure the reminders have been enabled in Outlook:
    On the File tab, click Options.
    Select Advanced in the Outlook Options dialog box.
    In the Reminders section, select Show reminders.
    Click OK.
    I also found a similar thread here:
    http://social.technet.microsoft.com/Forums/windows/en-US/70bbd99e-6c1b-4a56-b1eb-f1812f96ed56/outlook-2010-reminders-not-appearing-in-outlook-but-appearing-on-iphone
    As mentioned in the thread, you can try these steps:
    Use MFCMAPI to delete the Reminders Folder, then run "outlook.exe /resetfolders" to recreate this folder:
    Download MFCMAPI:http://mfcmapi.codeplex.com/releases/view/118446
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    If the problem persists, try to recreate the user’s profile of the Outlook to check this issue:
    http://support.microsoft.com/kb/829918/en-us
    Regards,
    Melon Chen
    TechNet Community Support

  • Emails don´t appear in phone´s inbox (only in subf...

    I run nokia messaging on e71 and synch with gmail.
    Many (gmail labeled) emails don´t appear in the phone´s inbox, but I have to navigate to the subfolder "all mail" to see them.
    Certainly, they appear in my gmail inbox just normally.
    Also, I am not alerted if these emails arrive on my phone (as only the inbox triggers the "new message" sound and is displayed on my active desktop.
    However, other emails can be found in both folders, but if I read/delete in one of the folders, it is not unread/deleted in the other. No need to say that this is really confusing.
    How can I handle this behavior?
    I have to comment that right now nokia mail is not really a professional push-email system that can compare to bb...

    I have the problem that is other way. My inbox is getting filled but my subfolder emails are not syncing...Please let me know if u have any solution. For each folder I also checked the subscribe to folder option also.
    thanks in advance
    sumanasu

  • Multiple google calendars synced to my ipad with exchange but the entries don't appear

    I've done this many times before with various iphones, but my new ipad2 vexes me. I want all my google calendars to appear in the calendar app on my ipad. I've:
    set up the google account as an exchange account
    signed in to m/google.com/sync
    selected the correct device
    enabled the calendars
    you can see the complete list of calendars in the the cal app, but the actual events don't appear.
    if i create a new event on one of these invisable calendars, it appears.
    thoughts?

    Can you attach a screenshot?
    * http://en.wikipedia.org/wiki/Screenshot
    Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
    There are other things that need your attention.
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Next Generation Java Plug-in 1.6.0_14 for Mozilla browsers
    Update the [[Using the Java plugin with Firefox|Java]] plugin to the latest version.
    *http://kb.mozillazine.org/Java
    *http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

  • Photos and movies don't appear in Events/Photos but do appear in Last 12 months

    Hello. I'm using the latest version of iPhoto 11 (9.1.1). When I browse through my photos via the Events or Photos section of the iPhoto sidebar (under Library), certain photos and movies are missing. They simply don't appear there at all. However, when I click the "Last 12 Months" section of the iPhoto sidebar (under Recent), the photos and movies are there. If I try re-importing the missing photos and movies I'm told they are duplicates, so they must be in my iPhoto Library - they just refuse to show up under Events or Photos! I've tried ticking all the rebuild options by holding down command and option when I start iPhoto, but to no avail. Perhaps there's a setting I've inadvertently ticked that hides certain photos and movies? Hidden Photos is ticked under the View menu. I have View > Sort Photos set to "By date" / "Ascending".
    Thanks for all your help!
    Cheers,
    Greg

    since both last 12 months and events or photos are simply different views of the same photos in your library they are there - the most common issue is incorrect dates so you are looking in the wrong event - you can find the event by selecting the photo in the last 12 months view and and right clicking and using the show event command - you can correct the dates by selecting the photo and using the photos menu ==> adjust time/date command
    LN

Maybe you are looking for