Appraisals in MSS

Hi Experts
We have to implement Appraisals prosess in MSS.
Where i can see Appraisals in MSS.
All the following we need to implement
Appraisals
Edit Appraisals
Appraisal Overview
Appraisal Inbox
Status Overview
In MSS under Team i coudnt see any options for Appraisal.
Also is there any option for employee to set their objectives for appraisal
Please help me
Thanks
Karthi D.

Hi,
If you deployed MSS in portal, you will find all the iviews / pages / worksets / roles on appraisals under
Content Administration -> portal contenet -> content provided by SAP -> end user content -> under your BP folder you will find all standard appraisal iviews / pages / roles / worksets.
PradeeP

Similar Messages

  • OSA - Employees filter in "Create multiple appraisals" from MSS

    hello Gurus,
    We are implementing the Objective Settings and Appraisal module with EHP4.
    Starting from the EHP4, the manager can access a Webdynpro dashboard where he can check the status of the appraisees. With this functionality, he can also perform the mass creation of the new appraisals via the button u2018Create Multipleu2019.
    Using this functionality itu2019s not possible to filter the employees on the basis of the information stored in the IT0001 u2018Organizational Assignmentu2019, due to filtering mode on HRP1000 object type P. So the manager always see the whole list of employees under his u201Cmanager positionu201D HRP1001 relationship A012.
    In our project we need to distinguish between different employee group u201CP0001-PERSGu201D, but at the moment we are not able to do it.
    Does anyone know how to do it? In particular does anyone know if itu2019s possible to do it without a modification to the standard Webdynpro?
    In the lines below there are the technical details of the functionality u2018create multipleu2019:
    General Information About the Application and Component:
    Application:               HAP_START_PAGE_POWL_UI_MSS
    Web Dynpro Component:     HAP_START_PAGE_POWL_UI
    Window Information:          WDW_MASS_CREATE
    View Information:          VW_MASS_CREATE
    Configuration ID:          8AD9D996E000165551D9275E6CD3789A
    Information on Field:
    Field ID:               ROOTUIELEMENTCONTAINER
    Type of UI Element:          TRANSPARENT_CONTAINER
    UI Element Library:          STANDARD
    A quick feedback is really appreciated.
    KR
    Katia & Gabriele

    Katia Gabrielli,
    We are also implementing new Performance Management - WD ABAP with EHP4.
    When I open the Performance Management iview from MSS --> Talent Management, I can see an evaluation for my team.
    But when I click the link, nothing happens.
    Did I miss any configuration on the backend?
    How do I resolve this?
    Thanks
    Thruna

  • Appraisals -OSA-MSS

    Hi ,
    We are using EHP4 -OSA .I have a query about the standard behavior of the further participants ( further reviewers)role in MSS.
    When ever the appraiser (manager) adds the further reviewer in the template the rviewers get access to the forms of appraisees under ESS iview ,we are looking it under MSS instead of ESS.
    Under ESS reviewers should only get their appraisal forms only ,currently we are using 2 ess and mss webdynpro abap iviews which by default taking the forms under ESS ( Further reviewers).
    Could any one share their ideas on this .
    Thanks in advance
    Rag

    Hi Kumar,
    we have the identical requirements, and we may have to come up with the solution.
    it looks like just from initial research, that the you have to change the powl feeder class.
    you can see the powl feeder class using transaction :  POWL_QUERY and POWL_TYPE
    you will see that each tab is basically leveraging the same feeder class.  Within that feeder class they hardcode to know what to output based on the tab being selected.
    the main feeder class to tweak is to CL_HRHAP00_STARTPG_POWL
    within that class you will see the two methods where it looks like most of the work is being done to determine which templates to fetch.
    these methods: 
    IF_POWL_FEEDER~GET_SEL_CRITERIA
    IF_POWL_FEEDER~GET_OBJECTS
    So you would create a Zclass, and than change the methods.  The method changes would have to remove the additional reviewer off the ESS selection and add it to the MSS selection.  the ZCLASS would than be configured for each tab / feeder in POWL_TYPE. 
    let me know if you beat us to the solution

  • Appraisal document thru MSS

    Hi,
    We are using Appraisals in MSS using BSP.
    In MSS manager has an option to create a new Appraisal document. We would like to remove this option, since the appraisal document is created by HR centrally and is  available for employees and maangers once they area created.
    Please advice how to take out the option of creating an Appraisal documnet from MSS.
    Thank You!

    Hello,
    You need modify the BSP HAP_DOCUMENT.
    1 : Copy the BSP program to ZHAP_DOCUMENT
    2 : Modify the html Documents_todo.htm
    3 : if you need hide the button or any component for this page you only comments the lines the code with   <!--  
    and that lines not diplay in the BSP in portal.
    i hope this note is help you !!
    Edited by: Javier Ignacio Serrano Zamorano on May 14, 2010 4:33 PM

  • Assertion Error in Appraisals

    When performing appraisals in Objective Settings and Appraisals in MSS
    we get an error 'Assert condition was violated' when submitting the
    final appraisal ratings. However, only users using Internet Explorer 8
    get this error. The users have Internet Explorer 8 on their computer
    and get the error. Yet, if they sign on with the same computer via
    Citrix which contains Internet Explorer 7 they do not get it.
    Has anyone had this problem? Do you know of a fix?

    Hi,
    Please clarify few points, that will help us understand issue more clearly:-
    1) Record audio from Adobe Presenter>Record and then edit it from Adobe Presenter>Edit, then only Assertion appear ? Or even if you import audio from Adobe Presenter>import and then edit it from Adobe Presenter>Edit. In summary editing any recorded or imported audio causing assertion?
    2) At what point of editing you are getting Assertion. Like at time of deleteing , copy,paste,add new audio, insert silence?
    Regards,
    Shubhi

  • ECM Link to Appraisal Score

    On ECC 5.0, we are setting up Enterprise Compensation Management, MBO Appraisals and MSS. We have the appraisals configured to where a form can become 100% completed.  We have ECM configured completely as well.  Our issue is that in our Compensation Planning iView in MSS we cannot figure out how to link the appraisal score to the employees for planning, use in guidelines, etc.  We have activated the standard function module for this link, setup the standard column object to carry over this value, etc.  When viewing the Appraisal column in MSS, each employee has a number 0 as their appraisal score, and we get an error message "No appraisal document found".  Any suggestions would be much appreciated.

    Hi,
    Checking the following points may help you:
    1. In view V_T71ADM20 (IMG activity - Define Matrix Dimensions), there should be 1 dimension for MBO appraisal (MBOA) with Method Parameter as the element (VA, VB or VC) in which the appraisal result will be stored.
    2. In the same view V_T71ADM20, pay attention to field Dimension Date Shift. To give an example, if Appraisal document’s end date (e.g. 31-Dec-05) is less than the Compensation Planning begin date (e.g. 01-Jan-06), enter 1 day in this field so that the error "No appraisal document found" doesn’t appear.
    3. Check IMG activities Define Guideline Matrices and Assign Matrix Values.
    If none of these points help, do give some details of the customization done, in order to get some more clues.
    Regards,
    Vikas Bhatia

  • Part appraisals as part of OSA Status Overview in MSS?

    Hi,
    I'm in the middle of a clarification phase regarding implementation of Objective Setting and Appraisal (OSA). This is my question regarding part appraisals:
    In the Status Overview page/iview in MSS, the manager can prepare, see, select and modify documents with statuses like In preparation, In Planning and In Process.
    If a document has the substatus "Part appraisal in process", and the manager is the first part appraiser, I would expect the document to open the part appraisal column for input when I select the document from the "In Process" column. Instead the document is opened with the Final Appraisal column open for input.
    How can you include a managers part appraisal documents in the Status Overview page, or have the part appraisal column open for input?
    We want to make the Status Overview the "one point of access" for the managers appraisal tasks, but is that possible within standard?
    Kind regards Henrik

    Hi Henrik,
    Is your issue resolved, we did notice the similar behavior. However if BSP application HAP_DOCUMENT/documents_todo.htm is called directly, it displays the Part appraisal first and then upon completion it displays Final appraisal.
    I plan on providing this as URL in MSS as an alternative till OSS status overview is fixed.
    Any info ?
    regards
    Sridhar

  • MSS Edit Appraisals and Authorizations

    We are implementing MSS.  We have setup structural authorizations so the manager can see his reports.  We have the situation where previous year appraisals show up for an employee.  However, the manager has changed recently.  The manager cannot see/edit appraisals for his employee if the manager was not the original appraisor, even thow the appraisals show up in the list for the employee.  Any ideas?

    Hi,
    An objective setting cycle encompasses the following phases:
    Planning
    In a planning consultation, the necessary qualifications and competencies are first identified for an employee and then concrete objectives and required performance levels are agreed. For example, sales targets could be defined and the employee could agree to take on specific tasks in a project, and so on. These aspects can be defined by the manager, by the employee or both. The employeeu2019s personal training and development requirements are discussed and entered in the objective setting agreement.
    Review
    During the review, the objectives agreed with the employee during the planning phase are checked and adjusted to reflect the current situation. The manager and employee discuss the possible need for support, establish whether the objectives defined in the planning phase are still relevant, and add further objectives or decide to delete obsolete ones. Furthermore, the manager can make comparisons between the objectives set previously and the employeeu2019s current performance.
    Appraisal
    During the appraisal, the manager and employee discuss the extent to which the employee has fulfilled the set objectives. They check and assess the employeeu2019s overall performance and the implementation of concrete set objectives. Any further training requirements or an overfulfillment of the objectives are identified in the different areas. The appraisal document is completed when the manager and employee agree on an valuation. As soon as the appraisal document is saved in the system as Completed or Approved, the employeeu2019s compensation can be adjusted automatically and the employeeu2019s qualifications profile can be updated
    Get the proper information from following .
    https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=53773.

  • Creating tabs in Appraisals Overview Page(ESS/MSS) -Status Overview

    Hi,
    We have two types of Appraisal documents in system.
    One is normal Appraisal document and another is Talent Competency Assessment document.
    We are thinking to keep these two appraisal documents apart and away from each other.
    By creating the two Status Overview in ESS/MSS overview Page and controlled via PRogram to what documents appear in Status Overview Page.
    Can anybody suggest is ther any way around it to display two kinds of Appraisal documents separately.
    I tried this configuration in MSS,but it is not working.
    Regards
    Rizwan S

    Dear Siddarth,
    Thanks for the Previous Answer.
    Can I make the Zcopy of the Appraisals Page/Appraisals Application and use it for another type of Appraisal documents .
    1.Standard Appraisals Page for Standard Perfroamnce appraisals,
    2.Zappraisals Page for Competency Appraisals.
    Can you please tell me what are development efforts?
    What things to be copied to acheive this?
    Regards
    Rizwan S

  • MSS Status overview iview Objective Settings & appraisals

    Hi All,
    Currently the status overview Iview of MSS for appraisals display all the employees(in org unit) irrespective of whether the employee/appraisee has existing documents. This is because this Iview also has the functionality of creating the appraisal documents from here.
    In our case we don't create appraisal documents from this Ivew, so we hide the "In Preparation".
    Now the question is we want to filter the employees and display only those who has appraisal documents already created. How could we achive this?
    All we need is: We wanted to give an view to higher level manager with all the employees who has apprisal documents in completed status and he need to just approve/reject. Is there any other way we can achive this with out using the Status Overview Iview. I am not able to locate any bsp which serves this purpose from HAP_DOCUMENT.
    Please adive me, how can I achive this.
    Apprciate your inputs and any kind of help.
    Thank You,
    Hari.

    Hi, Check HAP_CALIBRATION / search.htm and result.htm you can enhance his behavior modifying filtering,
    Best Regards.-

  • Appraisals MSS iview

    Hi Experts,
    I'm quite new on this area ESS/MSS and I apologize if my question might sound too simple.
    So: for implementing and using the "Personnel Development" part from MSS but particularly the appraisals iview do you need to use SAP PD module in the back end system?
    I can assume so but I'm not sure...
    Thanks in advance,
    Eugen

    Yup. It definitely calls FM HRMSS_RFC_EP_READ_APRRAISALS at the backend. You can refer to this guide http://help.sap.com/saphelp_erp2005vp/helpdata/en/42/f8fa4045371a61e10000000a422035/content.htm for more details

  • MSS Appraisals

    Still muddling through the portal trying to implement ESS/MSS appraisals.  We have been successful in getting the ESS Appraisals configured and functioning.  The employee is able to see his appraisal document, open it and edit it.
    On the MSS side, the manager can see the appraisal for his employees, but the manager is not able to open the document for edit or display.  He just sees a list of the appraisals and the status of the appraisal.
    Is this an R/3 authorization issue or a portal role issue?  I am using the following iview - com.sap.pct.erp.mss.personneldev_appraisals.
    I have found several other appraisal iviews but those do not seem to be the correct iviews.  Suggestions....???

    Found iview generic_performance_management that will display the MSS appraisals.

  • Only Appraisals of year 2010 are shown on ESS, MSS in SAP Portal

    Hi,
    I have a problem on my enterprise Portal. I have 2 iview's configured which uses an standard WebDynrpo Abap application of ESS and MSS to show "Employee Documents". The problem is that there are only shown "Employee Documents" of year 2010, but not of year 2011. We have some appraisals on status "In course" and "clompleted" for this year, but these don't appears.
    The configuration of the 2 iview's are the following:
    Iview name: Appraisals
    Application name: HAP_START_PAGE_POWL_UI_ESS
    Configuration name: HAP_START_PG_POW_ESS_AC
    Platform: Web Dynpro for ABAP
    Iview name: Team Appraisals
    Application name: HAP_START_PAGE_POWL_UI_MSS
    Configuration name: HAP_START_PG_POW_MSS_AC
    Platform: Web Dynpro for ABAP
    Anybody knows where should I modify date range, or configuration to be shown all "Employee Documents"?
    Thanks in advance.
    Javier

    Hi,
    Finally I cleaned cache of applications OSA-POWL-ESS and OSA-POWL-MSS, whith report POWL_D01. After I modified queries for these applications on transaction POWL_QUERY (OSA_MSS_IN_PLANNING, OSA_MSS_IN_PROCESS, etc).
    With this, I solved the problem!
    Thanks for helpful.
    Javier

  • How can I display appraisals in "employee search(MSS)"?

    I created a new iView that is copied from employee search of MSS .
    <pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.iviews/com.sap.pct.erp.mss.hcm/com.sap.pct.erp.mss.generalinfo_employeesearch>
    I changed the properity as below.
    Organizational Structure View >  MSS_HAP_EE_SRCH
    Group of Organizational Structure Views >  MSS_HAP_STATUS
    As a result I can confirm the screen of appraisal table in this iView but the appraisal data is not displayed in this iView.
    Should I customise any more?
    I think that the cause of this problem is in "HRHAP_PORTAL_COLUMN_FILL_ERP".
    There is many parameters and table, but I cannot find the point to give it to this function module.
    Best regards,
    Makoto

    I have found the standard iView & page...
    <pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.pages/com.sap.pct.erp.mss.hcm/com.sap.pct.erp.mss.performane_management>

  • MSS business Pack 60.1.2 iviews (Appraisals)

    We are using MSS business Pack 60.1.2. Two iviews with in
    the 'Staff' workset group,
    a.  AppraisalOverview
    and
    b.  EditAppraisal
    are calling a function module groups
    HRWPC_APPRAISALSOVERVIEW
    and
    HRWPC_APPRAISAL
    which seem like using the old tables belonging to the
    previous release of 50.4 or older.
    Did any one ran in to this situation, and found any
    solution ?
    This seems like case for an OSS message, and I searched
    for one, but I can't find. So I want to make sure it is
    an established problem or not.
    Thanks in advance,
    Prasad Nutalapati

    Infact, there is already an OSS message existing. I did
    search with wrong 'application component' name.
    Inbrief, the solution is that you are not supposed to use
    those two iviews with ECC50, since they belong to prior
    release of HR implementation.
    Hope this helps,
    Prasad Nutalapati

Maybe you are looking for