Appraisals Workflow

Hi,
My HR Consultant has configured Appraisals. The Employee goes to Infotype 25 and enters the appraisal rating and saves, than the Appraisal goes to the Manager there he can change the ratings and complete the process.
Now my client wants an intimation to the manager by mail when the employee fills the Ratings. I have Switch on the event trace and created a Appraisal now no event has been captured.
How can I send my to the manager when an employee creates an Appraisal.
Regards,
Ramu N.

Hi Ramu,
In SWEHR3, you can customize that a change on a particular infotype triggers a check function module to determine which event should get raised.
I think in your case, you have to place a break-point (if this doesn't work use an endless loop and debug in SM50) in the FM you're using, to check if the logic works for determining the event.
Kind regards, Rob Dielemans

Similar Messages

  • Performance Appraisals - workflow

    Hi Experts,
    I have configured OSA and 360 degree appraisals. But I am not sure as to how is the process flow. I could see something called Workflow event in template level configuration in status flow. Please throw some light on this.
    Could anybody please explain about workflow. And also, how these documents are available to employees via ESS and MSS.
    Thanks in advance!

    I am no more working on this issue

  • Approval Management/ Workflow in Appraisals

    Hi All
    I am implementing Approval Management in Appraisals functionality. Workflow process name is HR_APPRAISAL_DETAILS_JSP_PRC. Issue I am facing is in this workflow process it does not passivate any value.
    If I want to manipulate some field in it like Feedback comments or some thing and base on which I will have to send the notification then it is not possible, as the values are not stored in database yet and neither in the hr_api_transaction_values table.
    Can you pls tell how can I achieve this.
    Regards
    Gaurav

    Hi,
       My user want to use R/3 only for leave management section. we have no portal.
    will this workflow would work fine in this case? if so how do i proceed to get it configured?
    Thanks in Advance.
    Regards,
    Babu

  • PD Employee Appraisals in 4.6c using workflow

    We are trying to setup a solution which will have multiple appraisal statuses , but SAP 4.6c version has only 2 statuses : In process & Completed.
    The standared SAP delivered workflow has only 'Appraisal Completed' event. We are looking for triggering workflow based on custom statuses like "Changed" , "Mgr Approved".
    Is it possible to achive this without making or adding multiple events to the BUS7026 business object.
    Any recommendations & Ideas ?
    Thanks,
    Abdul

    Hello,
    Do you mean attach it programmatically (if so: how are you doing it), or as a workflow user?
    Is FM SO_NEW_DOCUMENT_ATT_SEND_API1 available in your version? You could try it with doc_type = ZIP, not sure if it's allowed.
    regards
    Rick Bakker
    Hanabi Technology

  • Appraisal Workflow

    Hi,
    I am trying to configure workflow for Appraisals and not able to. These are the steps I have followed:
    1. Go to PFTC (Tcode) for workflow templates such as 12300109,12300110,12300111,12300113,12300114,12300115,12300116,12300117,12300119,12300120,12300121,12300122,12300124,12300125,12300126,12300127.
    2. Activate the event linkages.
    3. For all tasks, which aren't background tasks, has to be defined as 'General task' there.
    4. Activate the required workflow events once during system setup.
    PHAP_ADMIN_PA (Tcode)--> Utilities --> Event Linkages.
    In the column Type linkage active, place a check mark next to the events you want to activate and click on the activate icon.
    5. PHAP_CATALOG_PA (Tcode --> Select the required Category Group --> Category --> go to 'Status Flow' tab --> 'Status' subtab ---> activate the status by checking them.
    In the same subtab, go to 'Events' subtab and select the required workflow events.
    6. Select the required template under that --> Select 'Status Flow' --> For every 'Status' and 'Substatus', select the workflow event.
    But after following the above steps, when I create Appraisal and proceed with, I am not able to make the events trigger.
    Can anybody help me to provide me the documents or required/ additional steps to make it possible?
    Regards,
    Suraj Kumar

    HI I m getting the problem related to this MBO appsaisal wf plzzzzzz guide me..
    i made 4 workflows for MBO appraisal using APPR_DOC BO nd using std wfs- ws12300114, ws12300122, ws12300124 nd ws12300125. all r working properly in development server.
    but
    in quality all r giving errors related to evevts. as for example, for ws12300114 workflow it is giving error--
    "Event 'INFO_APPRAISEE_CHANGE_APPROVE' is not defined for object type 'APPR_DOC' "
    for all 4 wfs it is giving error like this related to event nd business object.
    plzzzzzzzz anybody knows thn reply or call me at 09886999122 or mail at [email protected]
    thanks
    Raj

  • Performance Appraisals-Only show the document in certain status/substatus

    Hello
    We would like the appraisee to see the document only in (Status "X" and Substatus "Y") OR Status = "XX". The Appraisee should NOT have access in any other status. Which BADI/approch can help us meet the requirement? We tried using the BADI HRHAP00_DOC_BC but that does not seem to help.
    Please advise ASAP.

    Hi Swetha,
    1) How do you create the person authorized in the Status flow.
    (for eg: I have a scenario like this..The authorized HR person would set objectives for group of employees at the beginning of the year for annual appraisals and also he should be able to change or add more objectives if required in the Review period. After the completion of one year, the Manager, Self and Higher Manager will give their ratings and the final result should be displayed only to the HR Personnel)
    I have Appraiser, Appraisee, Part Appraiser, Higher Manager and All users right now in my system and I am using All users.
    Ans : Person authorized should be created through the tcode PFAC. This s the place where rules for workflow have to be created. Once it si done here, the corresponding rule has to be added to the Tcode OOHAP_BASIC. The rule add to this tcode will be visible in youe category group and category, template  in PHAP_CATALOG. As far as possible try to use the standard rules available. All the users you have mentioned above have a standard role in SAP.
    2) How would you give authorization to only HR person?
    Ans : Can you be more specific here. Like what exactly the HR person has to do?
    3) In Status flow, I can see Workflow event. What is it used for?
    Ans : Workflow is used to send the notification and the workitem to the user to whom an appraisal document is available for editing in his inbox.
    Eg on a typical case-> If a self appraisal has to be done, then a workflow will be triggered in the beginning of in process phase. Then the appraisal doc wil be available in the inbox of the appraisee.
    For workflow and Rules(Agent Determination) related objects have an ABAPer who has worked on Workflow.
    Hope this helps you.
    Regards,
    Subbu.

  • Custom Workflow for custom HCM form - reg

    Hi,
    We have a custom form designed and having a workflow for that. We have developed the workflow like any other workflow for appraisals for example or in SD. But here while test run of process we are getting error saying 'Work Item not found' though the work item is present in SWI1.
    We have below steps.
    Header
    Importing form container
    User Desicion (Approve/Reject)
    If approved update database.
    Can any one correct me if am wrong.
    Raj

    Hi,
    For workflows involving HCM forms, there some standard tasks which should be made use of:
    Task Group TG17900001: Components for HCM Processes & Forms
    Task Group TG17900002: Interactive Components
    Standard Task TS17900100: Edit Form
    Standard Task TS17900101: Approve Form
    Standard Task TS17900102: Form Is Edited Again by Author
    Standard Task TS04000018: Process PD Form
    Standard Task TS04000019: Approve PD Form
    Standard Task TS04000020: PD Form Is Edited Again by Author
    Workflow Template WS17900260: Save Form with Error Handling
    Workflow Template WS17900404: Draft for Process Start
    Workflow Template WS17900418: Forward: Process Start with Errors
    Task Group TG17900003: Background Components
    Standard Task TS17900106: Check Existence of PA Infotype
    Standard Task TS17900107: Check Form Data
    Standard Task TS17900108: Save Form Data
    Standard Task TS17900110: Import Field Value to WF Cont. Element
    You can use TS17900110, TS17900101/TS04000019 and TS17900107. Please make sure you read some documentation before you use these tasks.
    Let me know, whether this is helpful.
    Thanks,
    Sukumar.

  • Quarterly & Half yearly appraisal in objective settings and appraisals

    Hi,
    I've customized the Objective Settings and Appraisals, created a template with part appraisal & its working properly. In my company the appraisals take place every 6 months i.e twice a year. If I create an appraisal document for an employee with validity say 1 year i.e. 01.04.2009 to 31.03.2010 in infotype 0025. Now within same appraisal document using part appraisal concept how can I do appraisal of that employee 2 times. Is it possible or I'll have to create 2 records in infotype 25, first for first 6 months & second for next 6 months. what should be the standard process?

    Hello,
    The administrator functions are in transaction PHAP_ADMIN. If you have a customer report and want to assign this to the transaction you implement HRHAP00_ADMIN. This has the advantage that the document selection (screen) is a given and you only need to start the report on the selected documents.
    However, you normally would not give the administrator functionality to a 'normal' manager. This because the admin functions are performed without any checks and are very powerfull.
    Your requirement can be or done via statusflow configuration (with extention set 2.00 and higher) or only by the administrator. To be honest, I think the statusflow won't give you the flexibility you probably want in this case (do workflows get re-triggered, are value determinations restarted etc etc.)
    In our design resetting a document status is an interuption in the process which should only be possible for the administrator. The transaction phap_change_pa allows the manager to reset the document from completed to in process but thats all (This is not available in the portal).
    Regarsd and Groetjes,
    Maurice

  • Objective Setting and Appraisals.

    Hi Everyone,
    I am learning Objective setting and appraisals. Could you please shed some light on where to begin.
    I looked at the help documentation, but i feel i should get a overview of the whole process before going into configuration. I know it might be too much to ask but, could some one please share any documentation or links which describes it step by step like taking examples etc. Appreciate all the help. Have a nice day.
    My E-Mail: marian_roza @ yahoo.com
    Thanks in advance
    M.Roza

    Check the url it might help u.
    http://help.sap.com/saphelp_erp2005/helpdata/en/cd/dae43e4ab011d18a0f0000e816ae6e/content.htm
    for PD
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
    /people/community.user/blog/2007/01/18/objective-setting-appraisals-document-datamodel
    /people/community.user/blog/2006/10/13/objective-setting-appraisals-value-determinations
    https://websmp107.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000079831&
    https://websmp107.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000079827&
    https://websmp107.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000081846&
    Transaction Code – OOHAP_CAT_GROUP
    Trough this transaction the Category Group level customizations can be done.
    Transaction Code – OOHAP_SETTINGS_PA
    The appraisal process has to be enabled.
    Transaction Code – OOHAP_VALUE_TYPE
    Through this transaction code rating scale configuration has to be done. Quality, Quantity rating scales can be created.
    Transaction Code – OOHAP_CATEGORY
    Category level customizations can be done using this transaction code. The same customizations can be done using the transaction code PHAP_CATALOG.
    Transaction Code – OOHAP_BASIC
    Basic customizations related to the following areas have to be done using this transaction code.
    1. Column – The columns appearing in the appraisal document
    2. Value Class – Currency, Dates and etc.
    3. Role – Manager, Higher Manager and etc.
    4. Enhancements
    5. Sub status
    6. Workflow related customizations
    Transaction Code – PHAP_CATALOG
    This is the master transaction through which the templates are set. Based on templates the appraisal documents are created.
    Category Level customizations are done in the second level
    S.No Transaction Code Description
    1 PHAP_CREATE Create the appraisal documents
    2 PHAP_CHANGE Change and Create appraisal documents
    3 PHAP_PREPARE Prepare appraisal documents
    4 PHAP_SEARCH Reports
    5 PHAP_ADMIN Change status, appraiser, reviewer, etc.

  • Pending for Approval Appraisals

    Hi,
    Is there anyway to cancle the process of an appraisl that is "Pending for Approval"?
    I've tried to cancle the workflow from the sysadmin, although its status is canceled i still can see the appraisal pending for approval in the Appraisals In Progress section.
    Any advice?
    Thanks

    As my understanding,
    Employee has submitted these appraisals and they are pending for approval for respective Managers.
    If this is case, Two Possible solution could be there
    1. Manager can revert back to Employee
    2. Using API you can update to APPRAISAL record to "Pending with Employee". This change will effect in PER_APPRAISALS tables.
    Respective Notification you can close them from wf_notification Table.
    Thanks.

  • Multisource Appraisals -Business Partner

    Hi Folks,
    I need a small help from the experts.   Our Client is going for 360 Appraisals and we have developed the template,now the issue is where to configure the Business Parter -Object Type -BP ,is there any standard workflows provided by SAP.
    Through Tcode BP ,unable to create the businee partner, can we maitain this through any relationship like  A 291  ?
    Pls share ur ideas on this issue.
    Regards
    Kumar

    Hi Denis
    Please go to Transaction Code - BUCO
    and pick the sold to party, once you see the blank screen click on small tab which have an arrow underneath it. then just delete the tabs you dont need. If you want them back just pick Sap Standard from the tap menu
    Please let me know if this works and dont forget to give points

  • Workflow for Perfromance Appraisal

    Hi experts
    Can any one please tell me which relationship is used for standard workflow for appraisals? Wel for travel i used 005 is supervisors for manager and there its workin properly.. but for appraisals its sayin no agent assigned I hv tried 002 also der also it says no agent..
    Plz guys help me wit this... Thanks in advance...
    Neha

    Hi,
    You  can simulate (test) the rule in T.code PFAC.
    Check this std. Rule.
    00000157  -
    >     Superior (chief position)
    60100010  -
    >     HR Administrator
    Regards,
    Surjith

  • Creating Course Appraisals for I-view

    I have a custom developed i-view, where I want to have the course appraisals associated with participants to show in. I.e. once a appraisal is available in the Learning Portal (Perform Course Appraisal) it should also be available in the I-view, the idea is then to create a workflow with a link to this I-view, instead of linking to the BSP (as this doesn't work, due to a deep link problem).
    My problem is then, it seems the course appraisal documents aren't created before the link is activated (not sure how the data lies, but it seems the form is created upon clicking the link), that means that nothing will flow to the i-view before the link is activated.
    Do anoyone know have to "force" creation of these Appraisal Forms so they are available in the i-view even if the link isn't activated?
    You help highly apprieciated
    Jakob

    Hi,
    Like you said, the document is only created once the link is clicked. And without modification you cant influence it.
    What you could do is use this behaviour. Hide the appraisal part on the BSP, and on your custom Iview just replicate the logic used by the learning solution.
    Check if the course is completed , when yes create the appraisal document and show it in your own iview. LSO uses
    FM LSO_EVALUATION_GET_URL_CREATE to do the checks and create the appraisal url.
    Regards and Groetjes,
    Maurice Hagen

  • ESS Appraisal Workflow

    Hi all,
    quick question here. Currently, we are using appraisals (BSP) in ESS. I just wanted to check on the workflow that it is using between apraisee and apraiser. Is there a standard one? I need to troubleshoot.
    Thanks in advance.
    Regards

    Have you checked this [SAP Help|http://help.sap.com/erp2005_ehp_03/helpdata/EN/3e/300b37da4de72fe10000009b38f889/content.htm] ?
    ~Suresh

  • Workflow HR

    Hi,
    are there any standard Workflows for SAP HR Perfomance Appraisal,
    please comment on the same.
    Aditya.

    Hi Aditya,
    Am not so sure if you implementing Appraisals using Management By Objectives(MBO) or normal PD's Appraisals.
    If you using normal PD's Appraisals, then you can ignore the below part and follow the link mentioned by someone.
    If you using MBO's for implementing Appraisals, then you can refer the following Workflow Templates.
    Appraisee Change - WS12300114
    Appraisee Change and Approve - WS12300116
    Appraisee Change and Review - WS12300126
    Appraisee Display - WS12300113
    Appraisee Display and Approved - WS12300120
    Appraisee Display and Rejected - WS12300121
    Appraiser Change - WS12300110
    Appraiser Change and Approve - WS12300115
    Appraiser Change in Period - WS12300127
    Appraiser Change and Review - WS12300125
    Appraiser Display - WS12300109
    Appraiser Display and Approved - WS12300117
    Appraiser Display and Rejected - WS12300119
    Higher Manager Approve - WS12300122
    Next Part Appraiser Change - WS12300124
    Hope this helps.
    Regards
    <i><b>Raja Sekhar</b></i>

Maybe you are looking for