Appraraisal error - EHP4 -OBN

Hi Folks,
We have applied hr support patches from 20 to 28 in our system including EA-H4-28 . After this we are facing issue related to ehp4 appraisal application - the error we are getting in sicf while accessing the service -hap_start_page_powl_ui_ess
The following error text was processed in the system SRD : Access via 'NULL' object reference not possible.
The error occurred on the application server xxx_SRD_xxx and in the work process 0 .
The termination type was: RABAX_STATE
When we have checked the same in portal facing the below issues -
There is no iView available for system "SAP_ERP_HumanResources": object "employee". For more information, contact your administrator.
I have checked all the threads related to this issue found some replies :
Checking in tcode -lpd_cust - did not solve our problem
Applying the note - 1386141 , not sure about this..
Can any one please share their experices on this could be a great help.
Thanks
Kumar

Hi Kumar
This is a know issue that is solved on SP06, but before we make sure that this is your case, please have a look on this 2 notes carefully:
Note 1416756 - OBN Configuration in Performance Management
Note 1408243 - Configuration for object-based navigation (PA-PD-PM)
The OBN functionality in the Performance Management WD-ABAP is supported as of SAP_ABA 701 SP5.
This should resolve the problem.
Best Regards
Chetan

Similar Messages

Error in OBN configuration Transport in SAP HR Portal

Dear All
We have configured flexible performance management in SAP ECC 6.04 with new webdynpro interface.The issue is that OBN settings which are required to be done are not getting transported from dev to quality.Also i do not see any way to copy the original object and replace it with object from dev portal.
Pls suggest
regards

<< Do not post the same question across a number of forums >>

Emp document text-Ehp4-OBN-Carrer and JOB -Appraisals

Hi,
We have been uisng the ehp4 wd appraisals for a long time , recently we have updated the patch level and for this we need to use bp common parts which changed some of the look and feel feature on portal which we do not want to use.
1. The new text button -Employee Document is appearing on the forms in the portal ( its being picked for lpd_cust setting in the back end)
2. The color has changed from blue to white.
Can any one please share how to hide the employee document and how to retain the original color settings ( portal themes can not be used as this may change complete poral color)
Please share your ideas on this.
Thanks
Kumar rag
Edited by: kumar Rag on Dec 16, 2010 2:26 PM

Hello. Can upload an image for have an idea of you issue?
Use the page http://www.freeimagehosting.net
Regards

Error during upgrade from sap R3 4.7 ext 110 to ERP6 EHP4

Dear all
we doing an upgrade in test server to ERP6 with EHP4,source release is sap Entreprise 4.7 110.We have copied all the required DVDs to the server .During the configuration phase while giving the EHP package we got the error.
EHP_INCLUSION.log details
4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20100915210509
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 Looking for SAINT package for 'SAP_APPL' ...
4 ETQ399 R3upReadNewPackages:
4 ETQ399   patchType='U', langVect='DE'
4 ETQ359 RFC Login to: System="MBD", Nr="00", GwHost="saptest", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "spda_read_new_packages" by RFC
4 ETQ399   ismovesVersion='0'
4 ETQ399 R3upReadNewPackages: exit: rc=0
4 ETQ399      Found: name = 'SAP_BS_FND', release = '701', package = 'SAPK-701GGINSAPBSFND', type = 'AOX'
4 ETQ399             (not usable, different component
4 ETQ399 ... No matching package found.
Is this related to the current SAP_APPL support pack version ?.currently we have
SAPKH47031 SP 31 for SAP_APPL 4.70
Regards
Shahnas.S

> i have few questions regarding above
(Almost) all of your questions are answered in the note:
> 2.Do wee need to apply the above note for non-unicode upgrade
<...>
Even on non-Unicode system you should replace all matchcodes that are still required by search helps.
<...>
> 3.Note 1330256 recomends to apply support pack or to apply the Note 1330256 ,but we can do it only at upgraded version.
Yes - it avoids dumping with the dump mentioned in the note
> 4.How to identify the matchcodes
<...>
You can use the program TWTOOL01 to determine the existence of matchcodes.
<...>
> 5.How to delete them
<...>
You can then use the function module DD_MCOB_DEL to delete matchcode objects, and the function module DD_OBJ_DEL to delete matchcode IDs.
<...>
> 6.Impact of deleteing matchcodes
None since they were replaces by search helps.
Markus

Error while applying EHP4 to ERP6.0-phase MAIN_NEWBAS/JOB_BATCHCHECK_XPRA!

while i was applying EHP4 to my ERP6.0 system using Enhancement Package Installer i got the following error in the Downtime roadmap:
Severe error(s) occured in phase MAIN_NEWBAS/JOB_BATCHCHECK_XPRA!
Last error code set: RFC_ERROR 2: DUMP_ERROR
i checked the RSUPGBWD.LOG and here is what i found:
1 ETQ201 Entering upgrade-phase "JOB_BATCHCHECK_XPRA" ("20110503131506")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPSR3
4 ETQ399   auth_shadow_upgrade=0
1 ETQ200 Executing actual phase 'MAIN_NEWBAS/JOB_BATCHCHECK_XPRA'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'RSUPGBWD'
2 ETQ399 Arg[1] = ''
2 ETQ399 Arg[2] = 'IGNORE'
2 ETQ399 Arg[3] = 'RSUPGBWD\.$(SAPSID)'
2 ETQ399 Arg[4] = '3'
2 ETQ399 Arg[5] = 'Batch execution checker'
2 ETQ399 Arg[6] = 'RSUPGBWD.ELG'
4 ETQ260 Starting batchjob "RSUPGBWD"
4 ETQ010 Date & Time: 20110503131506
4 ETQ260 Starting batchjob "RSUPGBWD"
4 ETQ230 Starting RFC Login to: System = "ERD", GwHost = "erp-dev", GwService = "sapgw00"
4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
4 ETQ399 JOBNAME='RSUPGBWD', REPNAME='RSUPGBWD', VARNAME='', BATCHHOST='erp-dev', IV_SCHEDEVER=' '
4 ETQ234 Call of function module "SUBST_START_BATCHJOB" by RFC succeeded
4 ETQ399 Returned JOBCOUNT='13150600'
4 ETQ233 Calling function module "SUBST_CHECK_BATCHJOB" by RFC
4 ETQ010 Date & Time: 20110503131509
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
1EETQ242 Error code "-1" during analysis of logfiles matching "RSUPGBWD\.ERD"
2EETQ262 Batchjob "RSUPGBWD" aborted
4 ETQ359 RFC Login to: System="ERD", Nr="00", GwHost="erp-dev", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ260 Starting batchjob "RSUPGBWD"
4 ETQ230 Starting RFC Login to: System = "ERD", GwHost = "erp-dev", GwService = "sapgw00"
4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
4 ETQ399 JOBNAME='RSUPGBWD', REPNAME='RSUPGBWD', VARNAME='', BATCHHOST='erp-dev', IV_SCHEDEVER=' '
4 ETQ234 Call of function module "SUBST_START_BATCHJOB" by RFC succeeded
4 ETQ399 Returned JOBCOUNT='13150600'
4 ETQ233 Calling function module "SUBST_CHECK_BATCHJOB" by RFC
4 ETQ010 Date & Time: 20110503131509
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
1EETQ242 Error code "-1" during analysis of logfiles matching "RSUPGBWD\.ERD"
2EETQ262 Batchjob "RSUPGBWD" aborted
4 ETQ359 RFC Login to: System="ERD", Nr="00", GwHost="erp-dev", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
2WETQ360 RFC of "subst_list_sys_logs" failed:
2WETQ361 code/exception : DUMP_ERROR
5 ETQ359 RFC Login to: System="ERD", Nr="00", GwHost="erp-dev", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
i also check ST22 for the error and i found this:
Runtime Errors         CALL_FUNCTION_CO
Date and Time          03.05.2011 13:15
Short text
     RFC error when sending logon data.
What happened?
    An error occurred when executing a Remote Function Call.
What can you do?
    Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    An error occurred when executing a Remote Function Call.
    Status of connection.... "-"
    Internal error code.... "-"
How to correct the error
So any clue with that error?

Hello Waseem,
I would recommend to update to the latest disp+work but also check in sm21 and find the work process that encountered the error. Then see in the corresponding work process trace file dev_w* for the real error that occured.
e.g. If you see ERROR => RFC Signon> Failure in ab_MakeTicketSndExternal calling
check note 1532825
and the report RS_TT_CLEANUP_SECSTORE
Regards,
Paul

Upgrade to ERP6.0 EHP4: Error in phase EHP_INCLUSION

In my upgrade from enterprise 4.7 ext.set 11.0 to erp 6.0 ehp4 I have the error:
Please specify a valid Enhancement Package stack configuration. The ADD-ON and
Support Package selection in the IS_SELECT and the BIND_PATCH phases is taken
from there. For more information, see SAP Note *1022704* .
01) * Cancel dialogue
02) - Repeat stack request from MOPZ (failed with 'No access to Solution Manager System')
03) - Provide stack configuration file in input field below
Select configuration:: Cancel dialogue
I don't want to include any further EHPS. Do I have to extract all packages from DVD EHP4_for_SAP_ERP6.0_NW7.01_Enhancement_Package (mat no 51033594)
Do I have to generate a sp_stack.xml, too ?
EHP_INCLUSION.LOG:
1 ETQ200 Executing actual phase 'PREP_EXTENSION/EHP_INCLUSION'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'ADDONEHP.DMP'
2 ETQ399 Arg[1] = 'NAVERSEHP.DMP'
2 ETQ399 Arg[2] = 'SPDA_EHP_INCLUSION.LOG'
2 ETQ399 Arg[3] = ''
2 ETQ730 Starting upload of all package files in "\\<transporthost>\sapmnt\trans\EPS\in"
4 ETQ010 Date & Time: 20090528151215
4 ETQ230 Starting RFC Login to: System = "T10", GwHost = "xxxxxx", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="T10", Nr="00", GwHost="xxxxxx", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20090528151216
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 EhP stack selection ...
4 ETQ399 ... requesting stacks from Solman/MOPz ...
4 ETQ230 Starting RFC Login to: System = "T10", GwHost = "xxxxxx", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="T10", Nr="00", GwHost="xxxxxx", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_STACK_SELECTION" by RFC
2 ETQ399 Returned table ET_STACKTAB:
Any ideas ?
Edited by: Uta Hedemann on May 28, 2009 3:40 PM

Hello,
We are performing an installation of EnhP4 with 7.01---SP stack 3. We are not able to continue from the error below. I am able to view the xml file from however SAPehpi is saying the file u201CError reading stack info (rc=3, reason="Stackfile not foundu201D.
I am not able to download another stack from Solmanu2026I am not able to select any Technical Usages to download the files for the stack version.
Any ideas?
EHP_INCLUSION.LOG
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=3, reason="Stackfile not found")
4 ETQ399 EhP stack selection ...
4 ETQ399 ... requesting stacks from Solman/MOPz ...
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_STACK_SELECTION" by RFC
2 ETQ399 Returned table ET_STACKTAB:
4 ETQ399 Reading stack content ...
4 ETQ399 ... reading stack configuration file "D:\EHP4_packages\SMSDXML_CER_20090924145226.720.xml"
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_GET_STACK_INFO" by RFC
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=3, reason="Stackfile not found")
4 ETQ399 EhP stack selection ...
4 ETQ399 ... requesting stacks from Solman/MOPz ...
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_STACK_SELECTION" by RFC
2 ETQ399 Returned table ET_STACKTAB:
4 ETQ399 Reading stack content ...
4 ETQ399 ... reading stack configuration file "D:\EHP4_packages\SMSDXML_CER_20090924145226.720.xml"
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_GET_STACK_INFO" by RFC
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=3, reason="Stackfile not found")
Regards,
Anthony

Error while doing EHP4 upgrade in downtime phase

HI .
Iam facing the below error while doing the EHP4 upgrade , in downtime phase.
Checks after phase MAIN_SWITCH/STARTSAP_TRANS were negative!
Last error code set: RFC call to subst_get_uvers failed with key RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 >
Connect to SAP gateway failed Connect_PM GWHOST=Hydhtc4526D, GWSERV=sapgw04, SYSNR=04 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.136.162.30:3304' not reached TIME Mon Jun 06 18:17:46 2011 RELEASE 720 COMPONENT NI (network interface) VERSION 40 RC -10 MODULE nixxi.cpp LINE 3286 DETAIL NiPConnect2: 10.136.162.30:3304 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER System start failed
Please help me in resolving this error.
Sanketh.

Hi,
Upgrade tool is trying to start the system but system is not coming up. Try to start system manually and see if system comes up or not. If not then check logs in work directory for why system is not coming up.
Thanks
Sunny

XPRAS_UPG error in DOWNTIME phase in EHP4

Hi,
I am getting the below error in XPRAS_UPG in DOWNTIME phase of EHP4 installation in ERP 6.0 on HP-UNIX and Oracle.
XPRA ERRORS and RETURN CODE in SAPRW70104.HD1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1AETR012XProgram terminated (job: "RDDEXECL", no.: "10302400")
Long text:
    Cause
      Program "&V#&", which was started in the background, was terminated
      abnormally.
    System Response
      The system created a job log for the terminated program.
    What to do
      Proceed as follows:
      Log onto the system in which the program was executed. The system is
      specified at the beginning of the transport log.
      Then call transaction SM37 to display the job log.
      Enter "&V#&" as job name and "DDIC" as user name.
      Restrict the starting date to the starting date specified in the
      transport log.
      For the other selection criteria, select only jobs with the status
      "cancelled". Then press <LS>Execute</>.
      A list of the jobs satisfying the selection criteria is displayed.
      You can display the log by pressing <LS>Job log</>.
      If the list contains several jobs, you can select the job with the ID "
      &V#&" with <LS>Display</> -> <LS>Job details</> or define further
      details for the selection criteria in the initial screen of transaction
      SM37.
      If the ABAP processor reports cancellation, double-clicking on the
      corresponding message in the job log branches to the display of the
      corresponding short dump.
1AEPU320 See job log"RDDEXECL""10302400""HD1"
1 ETP111 exit code           : "12"
>>> PLEASE READ THE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<<
XPRAs are application reports that run at the end of an upgrade.
Most XPRA reports have a report documentation that explains what
the report does and how errors can be corrected.
Call transaction se38 in the SAP system, enter the report name,
select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above <<<
I was successfully able to umlock the system and in SM37 I could see the job log pointing to ST22. In ST22 we have many dumps related to error PXA_NO_FREE_SPACE. I found many notes in marketplace but all are referring the parameter abap/buffersize which needs to increased. I am a bit apprehensive about the fact that since we are in DOWNTIME phase and in the middle of XPRA execution phase should we increase the parameter and restart the system and then continue with the upgrade???
I have also tried to run the phase many times but the same error persists.
Please can anyone help me to come out of this problem.....
Thanks & regards,
Rozal

Hello Rozal,
You are correct XPRAS is a downtime 2 phase, but actually your system is up and running. It was started way back in phase "STARTSAP_NBAS" its just that you cannot use your system productively. XPRAS executes the XPRAS methods in the running system.
Its absolutely safe, you can change the parameter take a restart and continue further.
- Niraj

Execution of Reports phase error during SAP EHP4 upgrade with EHPi

I started getting an error message in the "Execution of reports after put" phase
(within the Downtime phase) during the SAP EHP4 upgrade with Enhancement
Package Installer.
***** LIST OF ERRORS
AND RETURN CODES *****
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPRB70104.OPQ
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1AETR012XProgram terminated (job: "RDDEXECL", no.: "09064300") Long
text: Cause Program "&V#&", which was started in the background, was
terminated abnormally. System Response The system created a job log for
the terminated program. What to do Proceed as follows: Log onto the
system in which the program was executed. The system is specified at the
beginning of the transport log. Then call transaction SM37 to display the
job log. Enter "&V#&" as job name and "DDIC" as user name. Restrict the
starting date to the starting date specified in the transport log. For
the other selection criteria, select only jobs with the status
"cancelled". Then press <LS>Execute</>. A list of the jobs satisfying the
selection criteria is displayed. You can display the log by pressing
<LS>Job log</>. If the list contains several jobs, you can select the job
with the ID " &V#&" with <LS>Display</> -> <LS>Job details</> or define
further details for the selection criteria in the initial screen of
transaction SM37. If the ABAP processor reports cancellation,
double-clicking on the corresponding message in the job log branches to
the display of the corresponding short dump. 1AEPU320 See job
log"RDDEXECL""09064300""OPQ" 1 ETP111 exit code : "12" >>> PLEASE READTHE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<< XPRAs are
application reports that run at the end of an upgrade.
Most XPRA reportshave a report documentation that explains what the report does and how
errors can be corrected. Call transaction se38 in the SAP system, enter
the report name, select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above
<<<
I tried to follow the instructions in note 1269960, but the enhancement spot
CLASSIFICATION_TOOL was already active. I activated it again and reran the phase
but got the same error. Also, I couldn't implement the note using SNOTE because it is
the middle of the upgrade process.
I also found the following long text in ST22
"Internal error during syntax check: ("//bas/710_REL/src/krn/gen/scsymb.c#11"
Processing had to be terminated because an internal error
occurred when generating the ABAP/4 program
"CL_CLS_BADI_CHARACTERIZATION==CP".
The internal system error cannot be fixed by ABAP means only."
I am on a 64 bit System with CentOS Linux. 8 GB RAM, 250 GB HD with 20 GB free space.
So far, I could not find any information on this. Any help would be greatly appreciated!
Thanks,
Victor

Hi Victor,
Go to SM37 and put in the username as DDIC and see the job log.
Also check Sm50 and see whether you have BTC processes available.
Last but not the least check your filesystem space usage too.
Gerard

Error when trying to install ecc6.0 ehp4

Hi All,
We have successfully upgraded from 4.6c to ecc6.0 non-Unicode. After that we run the pre Unicode scripts and exported the tables.
To import the data we have started to install the ECC6.0 EHP4 sapinst but when we select central instance and next button it is throwing the error.
Please find the attached error below and update the solution.
OS: SUN SOLARIES.
DB: ORACLE.
Caught a known exception during service selection. Errortext: ESAPinstException: error text undefined Message stack: Opened sylib701_1.so exe dir is /tmp/sapinst_exe.5576.1277824257 MessageLib initialized successfully. Working directory changed to /tmp/sapinst_exe.5576.1277824257. Opened /tmp/sapinst_exe.5576.1277824257/iaguieng701_1.so Working directory changed to /dump/Inst_Master_51036888_10/InstMst_7.01_SR1__NW_ERP_CRM_SRM_SCM/IM_SOLARIS_SPARC. getspnam() returned NULL. checking existence of account user="karkar" uid="60102" succeeded with true. inserted account (karkar, 60102, USER) into the accountcache. receiving and sending on port 21200 Environment variable SAPINST_JRE_HOME set to value '/tmp/sapinst_exe.5576.1277824257/jre'. doStartGuiServer() is now running... java is: /tmp/sapinst_exe.5576.1277824257/jre/bin/java A child process has been started. Pid = 5665 Account sapinst already exists. checking existence of account group="sapinst" gid="10000" succeeded with true. inserted account (sapinst, 10000, GROUP) into the accountcache. exe dir is /tmp/sapinst_exe.5576.1277824257 Creating file /tmp/sapinst_instdir/x. Removing file /tmp/sapinst_instdir/x. Working directory changed to /tmp/sapinst_exe.5576.1277824257. Opened /tmp/sapinst_exe.5576.1277824257/iakdblib701_1.so Working directory changed to /dump/Inst_Master_51036888_10/InstMst_7.01_SR1__NW_ERP_CRM_SRM_SCM/IM_SOLARIS_SPARC. This is SAPinst, version 701_1, make variant 701_REL, build 1015597 compiled on Oct 2 2008, 23:23:11 showing dlg diProductChoice <dialog sid="diProductChoice"> <title>Welcome to SAP Installation Master</title> <dialog/> Login in progress Connection request to guiengine backend by host 3.239.137.35 Protocol version is 3.1 Send connect information client logged on Waiting for an answer from GUI CDialogHandler: ACTION_NEXT requested <dialog sid="diProductChoice"> <dialog/> checking existence of account group="superusr" gid="9999" succeeded with true. inserted account (superusr, 9999, GROUP) into the accountcache. Process environment
===================
Environment Variables
=====================
_ = /tmp/sapinst_exe.5576.1277824257/sapinstexe SAPINST_EXE_DIR = /tmp/sapinst_exe.5576.1277824257 PATH = /usr/dt/bin:/usr/bin SAPINST_EXEDIR_CD = /dump/Inst_Master_51036888_10/InstMst_7.01_SR1__NW_ERP_CRM_SRM_SCM/IM_SOLARIS_SPARC/. WINDOWID = 4194316 LOGNAME = karkar MAIL = /usr/mail/karkar TERMINAL_EMULATOR = dtterm USER = karkar SAPINST_JRE_HOME = /tmp/sapinst_exe.5576.1277824257/jre DISPLAY = localhost:10.0 SHELL = /usr/bin/ksh HOME = /export/home/karkar SSH_CLIENT = 3.239.148.171 4761 22 SSH_CONNECTION = 3.239.148.171 4761 3.239.137.35 22 LD_LIBRARY_PATH = /tmp/sapinst_exe.5576.1277824257 TERM = dtterm PWD = /dump/Inst_Master_51036888_10/InstMst_7.01_SR1__NW_ERP_CRM_SRM_SCM/IM_SOLARIS_SPARC TZ = US/Eastern User: karkar, Id: 60102 Effective user: karkar, Id: 60102 Group: superusr, Id: 9999 Effective group: superusr, Id: 9999 Umask: 027 Resource Limits ===============
RLIMIT_CPU: maximum amount of CPU time in seconds current: unlimited maximum: unlimited RLIMIT_FSIZE: maximum size of a file in bytes that may be created by a process current: unlimited maximum: unlimited RLIMIT_DATA: maximum size of a process's heap in bytes current: unlimited maximum: unlimited RLIMIT_STACK: maximum size of a process's stack in bytes current: 8388608 maximum: unlimited RLIMIT_CORE: maximum size of a core file in bytes current: unlimited maximum: unlimited RLIMIT_NOFILE: one more than the maximum value that the system may assign to a newly created descriptor current: 8192 maximum: 8192 RLIMIT_VMEM: maximum size of a process's mapped address space in bytes current: unlimited maximum: unlimited RLIMIT_AS: maximum size of a process's total available memory, in bytes current: unlimited maximum: unlimited Working directory: /dump/Inst_Master_51036888_10/InstMst_7.01_SR1__NW_ERP_CRM_SRM_SCM/IM_SOLARIS_SPARC
Supplementary group ids (up to 1024):
=====================================
9999, 1001
System call failed. Error 13 (Permission denied) in execution of system call 'stat' with parameter (/tmp/sapinst_instdir/ERPEhP4/AS-ABAP), line (535) in file (syuxcpath.cpp). stat(/tmp/sapinst_instdir/ERPEhP4/AS-ABAP) returned an error I cannot interpret. I will return UNKNOWN. Process environment ===================
Environment Variables
=====================
_ = /tmp/sapinst_exe.5576.1277824257/sapinstexe SAPINST_EXE_DIR = /tmp/sapinst_exe.5576.1277824257 PATH = /usr/dt/bin:/usr/bin SAPINST_EXEDIR_CD = /dump/Inst_Master_51036888_10/InstMst_7.01_SR1__NW_ERP_CRM_SRM_SCM/IM_SOLARIS_SPARC/. WINDOWID = 4194316 LOGNAME = karkar MAIL = /usr/mail/karkar TERMINAL_EMULATOR = dtterm USER = karkar SAPINST_JRE_HOME = /tmp/sapinst_exe.5576.1277824257/jre DISPLAY = localhost:10.0 SHELL = /usr/bin/ksh HOME = /export/home/karkar SSH_CLIENT = 3.239.148.171 4761 22 SSH_CONNECTION = 3.239.148.171 4761 3.239.137.35 22 LD_LIBRARY_PATH = /tmp/sapinst_exe.5576.1277824257 TERM = dtterm PWD = /dump/Inst_Master_51036888_10/InstMst_7.01_SR1__NW_ERP_CRM_SRM_SCM/IM_SOLARIS_SPARC TZ = US/Eastern User: karkar, Id: 60102 Effective user: karkar, Id: 60102 Group: superusr, Id: 9999 Effective group: superusr, Id: 9999 Umask: 027 Resource Limits
===============
RLIMIT_CPU: maximum amount of CPU time in seconds current: unlimited maximum: unlimited RLIMIT_FSIZE: maximum size of a file in bytes that may be created by a process current: unlimited maximum: unlimited RLIMIT_DATA: maximum size of a process's heap in bytes current: unlimited maximum: unlimited RLIMIT_STACK: maximum size of a process's stack in bytes current: 8388608 maximum: unlimited RLIMIT_CORE: maximum size of a core file in bytes current: unlimited maximum: unlimited RLIMIT_NOFILE: one more than the maximum value that the system may assign to a newly created descriptor current: 8192 maximum: 8192 RLIMIT_VMEM: maximum size of a process's mapped address space in bytes current: unlimited maximum: unlimited RLIMIT_AS: maximum size of a process's total available memory, in bytes current: unlimited maximum: unlimited Working directory: /dump/Inst_Master_51036888_10/InstMst_7.01_SR1__NW_ERP_CRM_SRM_SCM/IM_SOLARIS_SPARC
Supplementary group ids (up to 1024):
=====================================
9999, 1001
System call failed. Error 13 (Permission denied) in execution of system call 'lstat' with parameter (/tmp/sapinst_instdir/ERPEhP4/AS-ABAP), line (535) in file (syuxcpath.cpp). lstat(/tmp/sapinst_instdir/ERPEhP4/AS-ABAP) returned an error I cannot interpret. I will return UNKNOWN. Process environment ===================
Environment Variables
=====================
_ = /tmp/sapinst_exe.5576.1277824257/sapinstexe SAPINST_EXE_DIR = /tmp/sapinst_exe.5576.1277824257 PATH = /usr/dt/bin:/usr/bin SAPINST_EXEDIR_CD = /dump/Inst_Master_51036888_10/InstMst_7.01_SR1__NW_ERP_CRM_SRM_SCM/IM_SOLARIS_SPARC/. WINDOWID = 4194316 LOGNAME = karkar MAIL = /usr/mail/karkar TERMINAL_EMULATOR = dtterm USER = karkar SAPINST_JRE_HOME = /tmp/sapinst_exe.5576.1277824257/jre DISPLAY = localhost:10.0 SHELL = /usr/bin/ksh HOME = /export/home/karkar SSH_CLIENT = 3.239.148.171 4761 22 SSH_CONNECTION = 3.239.148.171 4761 3.239.137.35 22 LD_LIBRARY_PATH = /tmp/sapinst_exe.5576.1277824257 TERM = dtterm PWD = /dump/Inst_Master_51036888_10/InstMst_7.01_SR1__NW_ERP_CRM_SRM_SCM/IM_SOLARIS_SPARC TZ = US/Eastern User: karkar, Id: 60102 Effective user: karkar, Id: 60102 Group: superusr, Id: 9999 Effective group: superusr, Id: 9999 Umask: 027
Resource Limits
===============
RLIMIT_CPU: maximum amount of CPU time in seconds current: unlimited maximum: unlimited RLIMIT_FSIZE: maximum size of a file in bytes that may be created by a process current: unlimited maximum: unlimited RLIMIT_DATA: maximum size of a process's heap in bytes current: unlimited maximum: unlimited RLIMIT_STACK: maximum size of a process's stack in bytes current: 8388608 maximum: unlimited RLIMIT_CORE: maximum size of a core file in bytes current: unlimited maximum: unlimited RLIMIT_NOFILE: one more than the maximum value that the system may assign to a newly created descriptor current: 8192 maximum: 8192 RLIMIT_VMEM: maximum size of a process's mapped address space in bytes current: unlimited maximum: unlimited RLIMIT_AS: maximum size of a process's total available memory, in bytes current: unlimited maximum: unlimited Working directory: /dump/Inst_Master_51036888_10/InstMst_7.01_SR1__NW_ERP_CRM_SRM_SCM/IM_SOLARIS_SPARC   Supplementary group ids (up to 1024):
=====================================
9999, 1001
System call failed. Error 13 (Permission denied) in execution of system call 'mkdir' with parameter (/tmp/sapinst_instdir/ERPEhP4/AS-ABAP, S_IRWXU | S_IRWXG | S_IRWXO), line (372) in file (syuxcpath.cpp). Unable to create node /tmp/sapinst_instdir/ERPEhP4/AS-ABAP with type directory: Permission denied. Please inform the installation development, execution will be terminated now.

Hi Eric,
Thanks for your reply.
We have followed the same as per the note #870652 - especially for the file permissions.
We have downloaded the latest sapinst and tried the same but no luck. Please find the trace for further understanding.
=>sapparam(1c): No Profile used.
=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
INFO       2010-06-30 02:29:01.844 [syuxccuren.cpp:119]
           CSyCurrentProcessEnvironmentImpl::removeEnvironmentVariable
Removed environment variable SAPPARAM700 from current process environment.
INFO       2010-06-30 02:29:01.845 [iaxxclib.cpp:114]
           CChangeCWD::~CChangeCWD()
Working directory changed to /dump/logs/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/CENTRAL.
INFO       2010-06-30 02:29:02.380 [sixxcstepexecute.cpp:790]
Execute step fillContext of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0
INFO       2010-06-30 02:29:02.545 [sixxcstepexecute.cpp:790]
Execute step setDefaults of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|NW_getFQDN|ind|ind|ind|ind|1|0
Jun 30, 2010 2:29:02 AM [Info]: Stopping services ...
Jun 30, 2010 2:29:02 AM [Info]: Stopping service "SAPinstService" ...
Jun 30, 2010 2:29:02 AM [Info]: Service "SAPinstService" stopped.
Jun 30, 2010 2:29:02 AM [Info]: Services stopped.
Jun 30, 2010 2:29:02 AM [Info]: Server shutdown by SAPinstService
iauxsysex.c:318: child /dump/logs/sapinst_exe.13263.1277879075/sapinst (pid 13264) has crashed. Executable directory is /dump/logs/sapinst_exe.13263.1277879075. Contact Support.
iaextract.c:895: child has signaled an exec error. Keeping directory /dump/logs/sapinst_exe.13263.1277879075
Regards,
Venu

Error while creating Vacancy requisition object (NB) after upgrading EHP4

Hi All,
We had alreay E-Rec system with EHP2 and using last 1 year. Now based on Client requirement, we have upgrdaed to EHP4. After completing EHP4 upgradation, we are getting error while creating vacancy requisition object after all level of approval.
Can any body help how to resolve this issue?
Thanks in advance.
Regards,
Sreelatha

Hi
Hope SAP Note 1241014 will be useful to you.
Best Regards
Reddy

Error while uploading Transport request from SAP ECC6.0 EHP4 to SAP ECC 5.0

Hi friends,
Error while uploading transport request to the transport directory,
we downloaded the transport request from one sap system which have a set of developments(contains screen programs)
for example downloaded all co files and data files
control file: K900470.SAD and Data file: R900470.SAP from transport directory.
we are trying to upload the transport to another Sap system
we have
Uploaded the controlling file K900470.sad to the location  /usr/sap/transpad/cofiles/
Uploaded the controlling file R900470.sad to the location  /usr/sap/transpad/data/
we tried to add in the import queues using TCODE: STMS and trying to import.
During import we get the below error:
HALT: unknown dynpro format: d021s_length() returned 0 Please contact the SAP support.
End with rc : 16
Please help me on this
We are trying to copy from ECC 6.0 EHP4 to SAP 5.0 and SAP 4.7EE
Thanks & Regards
Murali Papana

Did you see that you tried to transport to an older release!! You should have expected such a result.
Before doing such a thing, you should have looked at SAP notes to see SAP recommendations, if any. And you're lucky, there are ones: [Note 1090842 - Composite note: Transport across several releases|http://service.sap.com/sap/support/notes/1090842]. You need to know that ECC6 corresponds to SAP Basis 7.0, and ECC5 corresponds to SAP Basis 6.40.

IN tocde KEI2 time out error in ecc 6.0 EHP4

Hi All
A program termination occurs in the PA transfer structure maintenance. When you go to the "Source" level, the ABAP runtime error "TIME_OUT" occurs in ECC 6.0 EHP4
I have checked one note with same error Note 320621 - ABAP runt.err."TIME_OUT" in PA transf.struct maint but its valid for 4.6 c and its obsolete for ECC 6.0,kindly suggest

Dear Pranav,
Please apply note 1496366 “'Function' value is not carried out in view” in your system.
Then the time-out issue will be solved.
Regards,
Miya

ECC 6.0 EHP4 -- upg to EHP5 error in MAIN_NEWBAS/TABIM_UPG w/ dup key err

Experts,
We are on ECC6.0 EHP4. I'm using EHPI to go to EHP5. This is AIX/Oracle 11g.
I'm stuck on phase MAIN_NEWBAS/TABIM_UPG. This is the error in the TABIMUPG.ELG log file.   See below.
I've tried re-running the phase a few times. It failes with below error or similar but table SOTR_TEXT also.
LIST OF ERRORS AND RETURN CODES *******
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MAIN IMPORT ERRORS and RETURN CODE in SAPI-70201INSAPBSFND.RDM
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETW000 1 duplicate key error during insert into table SOTR_HEAD occured
2EETW000 sap_dext called with msgnr "16":
2EETW000 -
db call info -
2EETW000 function:   db_setget
2EETW000 fcode:      RT_GET (0)
2EETW000 tabname:    SOTR_HEAD
2EETW000 len (char): 32
2EETW000 key:        801CC4EFFE841DDF809DBCE664D98822
2EETW000 ok fetches: 0
2EETW000 last entry:
2EETW000 retcode:    16
1 ETP111 exit code           : "12"
I'm totally stuck. I tried reviewing these notes but no help:
Note 1341975 - Add. info. on upgrading to SAP ERP 6.0 including EHP5
ABAP
Note 819655 - Add. info.: Upgrade to SAP NW 2004s ABAP ORACLE
Any pointer much appreciated.
NICK

Carsten,
Look at the /usr/sap/SID/instdir/EHPI/abap/log/SLOG702 for something like this:
WARNING:       Background job RDDIMPDP could not be started or terminated abnormally.
      Please check that the R/3 system is running.
      Please check the system. Use transactions SM21, SM37, SM50.
WARNING:       (This warning is harmless if no further warnings follow.)
If you see this a bunch of times, you will need to log in to the instance, go to SM61, make sure the background server for your instance is correct, and then also run the rddnewpp se38 report. That should resolve.
--NICK

Error in maintenence optimizer while selecting files for download for EHP4

HI,
We are trying to download files for upgrade of ECC (HCM) and Portal systems from EHP3 to EHP4.
This download we are doing through the Solman 7.0. Solman is currently at 7.0 but going to be upgraded soon to EHP1.
Problem is that after we select the files for download of ECC EHP4, in step 2.1 i.e. 'choose stack', the next screen shows error as "Only one EhP release is allowed additionally".
Is this because the Solman is not upgraded to EHP1 yet or soem other reason?
Please let us know.
Thanks for your time.
Thanks & Regards,
Kunal.

..have a look at the How-To Install EHP4 Guide (http://service.sap.com/~sapidb/011000358700000293582009E.PDF)
3.4.2 Only one EHP release is allowed
Issue: You get the error message: u201COnly one EHP release is allowedu201D
Reason: This problem is documented in SAP Note 1139602.
If you get this error message, then you already have installed another SAP enhancement package on this system before (for example SAP enhancement package 3 for SAP ERP 6.0).
The error tells you that you have chosen too few technical usages. If you continued with this selection, you would not update all of the software components to SAP enhancement package 4 that are currently on SAP enhancement package 3. So in the end, some software components would be on SAP enhancement package 3 while others would be on SAP enhancement package 4. That way you would have several SAP enhancement package versions in one system, which is a state that is not supported.
Solution: SAP Solution Manager Maintenance Optimizer requests you to select more technical usages and proposes a list for you to choose from.
If you implement SAP Note 1287216, then Maintenance Optimizer automatically pre-selects the technical usages that are already installed on the system. In the example here, the technical usage Central Applications has been installed on a previous version of SAP enhancement packages.
In rare cases you still get the error after accepting what SAP Solution Manager proposes. The reason for this is that you updated software components without properly covering technical usages.
Hope that helps - best regards,
Christian.

Appraraisal error - EHP4 -OBN

Similar Messages

Maybe you are looking for