Approach for holding the same message and updating the table field Status

Hi,
I have a scenario a (first) proxy asynchronous to JDBC synchronous and then(second) proxy asynchronous.
my first proxy calls sends records (which has a status entry " in process" ) to JDBC it updates or inserts.
JDBC sends a response (may be a count of records updated or inserted)
now i need to handle some how to get the records which have been inserted or updated, so that i can map and change the table entry status field" in process" to " active".
Can i handle this without stored procedures.If so how
Can it be done through BPM where i retain inital mapping or any other solution. please help.

Hi Robin,
Ok (but that would be the apt method)
Some other approaches :
1. Make a async scenario (Proxy to DB), which will update or insert records. Write a trigger in DB which will fetch updated/inserted records and send it to XI. Then you update them in R/3 (via proxy). So you will have two async interfaces (one is Proxy to DB and other one DB to Proxy)
2. go for BPM. Receive (from proxy), transform sync send, transform send (to proxy) . I will not prefer this as it will be a performance hinderance.
Regards
Suraj

Similar Messages

HT1539 I have tried to download a digital copy that came with a movie I purchased and I keep getting the an error about HD purchase vs. SD purchase. I push redeem again and it has the same message and I cant download the movie. What can I do?

I have tried to download a digital copy that came with a movie I purchased and I keep getting the an error about HD purchase vs. SD purchase. I push redeem again and it has the same message and I cant download the movie. What can I do?

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotfo

Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotform.com, but this form doesn't search the site, instead it sends me an e-mail. Do you have a solution for me? Thanks.

Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotform.com, but this form doesn't search the site, instead it sends me an e-mail. Do you have a solution for me? Thanks.

I get a message MSVCR80.dll is missing reinstall itunes which i did but i keep getting the same message and cant open itunes at all

i get a message MSVCR80.dll is missing reinstall itunes which i did but i keep getting the same message and cant open itunes at all

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components; this won't normally affect its library, but that should be backed up anyway.
(99134)

After I reinstall Itunes, the message read "the file iTunes Library.it cannot be read because it was created by a newer version of itunes, i have tried with iTunes version 11.1, 10.1 and 9.1 still come up with the same message and will not open iTunes

after I reinstall Itunes, the message read "the file iTunes Library.it cannot be read because it was created by a newer version of itunes, i have tried with iTunes version 11.1, 10.1 and 9.1 still come up with the same message and will not open iTunes

Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash

I loaded in Lion - but my time capsule will not back up. I get an message: couldn't complete backup due to a network prolem. Also it says "make sure your computer and back up disk are on the same network, and that the backup disk is turned on.

I installed Lion on my Mac Pro laptop. Regarding Time Capsul - I get a messaage as follows: couldn't complete backup due to a network problem. Make sure your computer and back up disk are on the same network and that the backup disk is turned on. Then try again to back up. I have time capsul turned on. bill

I have exactly same problem with my MBP and MBA, after upgrading to Lion. I've tried to fix this issue while cheking key chain issues and network setup, even formating hdd and time capsule firmware upgrade (ver. 7.6.1.). Nothing can help. It is very annoying.

How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make/model, the wifi security being used (WEP, WPA, WPA2), etc.

TS1627 Please Help. I received 4 emails from 1 person with the same message heading. The emails were automatically grouped by Mail. I replied to the latest mail in the conversation. Once sent the other messages in the conversation disappeared. I NEED THEM

Please Help. I received 4 emails from 1 person with the same message heading. The emails were automatically grouped Apple Mail. I replied to the latest mail in the conversation. Once sent the other messages in the conversation disappeared. I NEED THEM BACK! They all had very important attachments. I have tried looking for them in deleted items, even though I didn't throw any of them away, still cant find them. Never had this problem before. I'm pretty sure its a setting somewhere. Also tried expanding all conversations, no luck. Searching for the mails under the sent email address, no luck.
I'm sure they are not deleted but have somehow been hidden by Mail. Very frustrating.
Thanks in advance for any help.
Kash.

I have found found out what has happened. I had requested a statement dating back to April 2012 from a supplier. They replied back with the latest statementof 2013 only but used the same subject heading as the previous monthly statements. Apple Mail automatically grouped these and I thought that they were sent altogether. As soon as I replied to the last email all other the previous emails ungrouped from the conversation leaving me lost as to where they had gone. They were all still sitting in my inbox but no longer part of the trcked conversation. I searched under the subject heading and all individual mails were all still there. (feeling stupid - )

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

How do i get a still image to fade the same way and at the same time as a video?

I have a video stacked on top of a still image. When i add a transition, the still turns to a black screen while the video fades in accordance to the transition. How do i get the still image to fade the same way and at the same time as the video?

I do. I've applied it to both the still image and the video. Say i used the lens flare transition. If i apply it to both the video and the still image, the video will dissolve in to the next frame, but the still image will go to a black screen and then jump to the next frame. Its almost as if i inserted a black frame instead of a transition, but only for 2 seconds. Below is kind of a peek what it looks like.

I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

The ZyXEL P-2601HN-F1, as you know, is a combination DSL modem & 802.11n wireless router (or gateway device).
For your goal you will want to take a look at this Apple Support article for details on how to configure an AX for iTunes.
If you are still having difficulties with the AX joining the ZyXEL's wireless network, you can try the following:
Temporarily disable wireless encryption.
If you are hidding the SSID, disable that feature.
Change the Mode Select setting to: 802.11g Only
Change the Channel Selection from "Auto" to a set channel, like 1, 6, or 11

How do I remove the application from your iPad at the same time and with the clouds?

Hello,
how can I remove the application from your iPad at the same time and with the clouds?
I know you press the app icon until it starts shaking, then press the black cross in the upper left corner. This will remove it.
But still I will come in to the store as a bookmark Purchated I see it with the symbol of a cloud. And I would like to remove it for good. Under iOS 5.1.1 somehow I managed to do that (at least hide it). In iOS 6 I can not do that.
I greet

The only transition you can add this way is default cross dissolve. If the images are in the timeline, move the playhead to the beginning of the images, select them all, and drag from the timeline to the canvas to overwrite with transition.

I want to forward a message with the default headers included, but can't seem to set my mail preferences to include the headers when forwarding, just the original message ends up in the forwarded message and not the headers?

I want to forward a message with the default headers included, but can’t seem to set my mail preferences to include the headers when forwarding, just the original message ends up in the forwarded message and not the headers? What I'm trying to do is report SPAM and add headers to a spam message to forward to sites that go after the spammers.

Did you check the article and the add-on mentioned there?

Automatically highlight the next message and remove the "unread" status

In my inbox on Ipad, when I swipe and delete a message or highlight the message and hit the delete icon in the upper right corner, it will automatically highlight the next message and remove the "unread" bullet next to the message. This is version 7.1. Is there a way tnot to have your messages marked as unread when you haven't read them yet?

You can hit the small flag icon and mark it as unread yourself.

Can I use my old apple tv and new apple tv together on the same network and with the same tv

Can I use my old apple tv and new apple tv together on the same network and with the same tv???

Welcome to the Apple Community.
Yes.

Approach for holding the same message and updating the table field Status

Similar Messages

Maybe you are looking for