Approch which will be good Proxies or idoc

Hi gurus,
Please can u guys reply
which would be the best approach to load the HR data in MDM VIA PI
1.Idoc
or
2.proxies
if so what are the reasons,any link where we can find proof of that
your quick response is appreciated
shankar

/people/ravikumar.allampallam/blog/2005/08/14/choose-the-right-adapter-to-integrate-with-sap-systems
some of the decision factors can be found there

Similar Messages

  • Good Movement Outbound Idoc

    Hi ,
    We have to transmit Goods movement idoc to our partner.Since i couldn't find any standard outgoing idoc for material document posting.
    Therefore we are considering below two approaches to get it done
    Solution 1
    We will use the user exit / customer exit like MB_CF001 available at material document posting to call FMs which will populate edidc & edidd of idoc type WMMBID02 (WMMBXY message type). We will updated NAST with our hard coded output types like ZABC.As soon as the the output type gets processed the message will be transmitted to partner.(For this output type we are planning to configure despatch time as IMMEDIALTELY therefore i believe message will get transmitted as soon as material document is posted.)
    But we can see few challenges in this
    1) Which program and routines we have to attach with output types ?
    2) In NAST along with output type we also have to update , material document number. How to get it before posting a document ?
    Solution 2
    We will use the user exit / customer exit like MB_CF001 available at material document posting.Using this exit we create a XML file with field and place into a disred directory. XI people will do the rest work for us.
    Need you advice on the feasible solution of two and which is more cost / effort effective 
    regards
    Shrey

    Hello,
    I've looked into WMMBID02 IDOC with Message type WMMBXY, and looked further into idoc documentation.  It is used for inbound GR transactions.  Below is what I intent to do.  We issue a PO to vendor via edi, vendor ships goods to us, and using MIGO, goods receipt transaction is performed.  What I intent to do is to create an outbound idoc when MIGO is performed, so that I can let the vendor know that we received the goods.
    Thanks,
    S

  • Is there a good video available for beginners which will show what Photoshop can do?

    I'm trying to find a good video which will give a general introduction to what Photoshop can do - not how to do it - for a group of beginners at our local photographic society.
    Ideally I'm looking for something which lasts 15 - 20 minutes and will demonstrate how Photoshop can be used for correcting and manipulating images, plus a short section on how it can be used more creatively.
    Is anyone aware of such a video which is preferably free to use (with obvious credits), and where it's available from?

    There are multiuser/multiplatform apps that you can use to manage your photos that can view multiple source photos.  I use  Media Pro 1.  However, you can't use iPhoto and MP on the same set of original/source image files.
    I use MP as my primary DAM (digital asset management) application and iPhoto just for special projects like books, calendars, cards, etc.
    OT

  • I just got InDesign CS6 and am running it on an iMac and I know the license is good for two computers which will come in very handy for me.  How do I set it up to access it from my second iMac?

    I just got InDesign CS6 and am running it on an iMac and I know the license is good for two computers which will come in very handy for me.  How do I set it up to access it from my second iMac?

    I just had an afterthought, Peter, if I could bother you further; if the downstairs iMac that I want to access it from is in my wife's name and not mine (even though I'll be the one using it on her computer) does that affect anything or can I simply load the software straight into her computer without any complications?

  • Need to change my Apple ID to a gmail address in preparation for a move and I have not been able to determine how to change this ID in iCloud?  I had to revert to my old ID which will not be any good in a few weeks.

    Need to change my Apple ID to a gmail address in preparation for a move outside the US.  When I did this, it did not change in iCloud and I have not been able to determine how to change this ID in iCloud for either my Mac or iPad?  I had to revert to my old ID which will not be any good in a few weeks.  Does anyone know how to make the iCloud settings changes?

    Welcome to the Apple Community.
    Start here, change your country if necessary and go to manage your account.

  • Disadvantages of proxies over Idoc and other adapters?

    Hi Friends,
    I am new to proxies in PI ,I searched so many forum queries on proxies but I did not find any on it.
    My main idea is in what scenario we  don't prefer proxies in PI.
    I will be thankful for your response.
    Thanks & Regards
    Raj

    Hey Hi Raj,
    The advantage and disadvantage depends on the exact requirement and scenariou2026
    For example. If you want to have synchronous scenario you will go for Proxy or RFC
    But if you want to build asynchronous scenario you will prefer to have IDOC 
    Following are few good threads which will help you a lot..
    Advantages and Disadvantages of Proxy
    advantages/disadvantages of different adapters
    RFC or IDOC or ABAP Proxy
    Thanks,
    Bhupesh

  • Resolution Steps:  iPhone, iPad or iPod Touch library corrupted and showing ghost entries which will not play or music that is on the device in iTunes but inaccessible.

    Issue:  iOS Music application either has items listed in the library that will not play; or has an empty library but iTunes reports that music is present on the device and taking up space; or a combination of these issues coupled with the inability to resolve the problem through the standard resolution steps of disabling music syncing to remove all music and then re-enabling or by enabling "manually manage library" and removing the items.
    Additionally, attempting to restore from a back-up does not resolve the issue and the default response from the Apple Support Community is to factory restore the device and treat as new device, resulting in loss of all settings and basically starting from scratch.
    Cause of issue:  Corrupted iOS device iTunes library (MediaLibrary.sqlitedb).  This database stores the iTunes Media records and related information such as playcount, lyrics etc.  It does not store information and settings regarding iOS Applications as far as I am aware so this should be safe.
    Resolution Steps:
    Perform a back-up to your local computer rather than iCloud if practical.  This will be quicker in the event of issues.
    Download a iOS device manager such as Phone View (http://www.ecamm.com/mac/phoneview/) which will allow you to directly access the file structure of the device.  (This will NOT require an illegal jailbreak to be performed!)
    Enable the Advanced View mode so the entire disk structure is accessible.
    Browse to the following file:  iTunes_Control/iTunes/MediaLibrary.sqlitedb
    Rename MediaLibrary.sqlitedb to MediaLibrary.sqlitedb-backup or similar
    Hold down POWER and HOME on your iOS device until the Apple logo appears.  Release both buttons.
    When device has rebooted, connect to iTunes and synchronise it.
    iTunes will detect that the Media Library on the device is missing and recreate it based on the items that it has listed in the iTunes synchronisation record for the device.

    michaelfromstockton on tees wrote:
    I've found an easier way, just go to settings>general>usage>music. Then swipe it and press delete, i think this deletes the database described above, then re-sync, this worked for me anyway. Good luck, you need it with Apple software.
    I don't have a large library of music on my iPhone 4s since I've only had it since Oct 2012, but since the update to iTunes 11 in early December, my album artwork has been all messed up.  Everytime I would try to add new music, it would assign the wrong album artwork to anything new coming in.  And in addition to that, it would also mess up album artwork of music already on my phone.  Everything looked correct in iTunes, but on my phone, not so much.  After trying to unsynch, then synching again, my frustration level was at an all-time high. This problem seems to be everywhere online, but no concrete solution for everyone. 
    I finally came across your simple solution (at least for me because of my small inventory of music) of just deleting all the music through the settings, and then re-synching to add back my music.  Now all of the album artwork is correct again.  I'm almost afraid to add new music for fear the artwork will get mixed up all over again! I still think my issue is somehow connected to the iTunes 11 update because up until then I had no issues whatsoever. Anyway, thanks for an easy solution that worked for me.

  • What are the best coding technics which will avoid performance problems

    Hi Experts
    What are the best coding technics which are avoiding memory problems and performance problems
    Some times one of few reports are taking too much time to executing while handling large data.
    1.What are the best way to declare a internal table to avoid performance problems.
    2.what is the best way to process data.
    3.what is the best way to clear memory.
    Can you guys help me give some good suggestions for  writing better programs  to avoid performance problems.
    Thanks
    Sailu

    Hi,
    Check this link..[Please Read before Posting in the Performance and Tuning Forum Updated |Please Read before Posting in the Performance and Tuning Forum;
    Which will be the first thread in the Performance and Tuning Forum.
    Search the SCN first.

  • Creating user defined pay items in a complex PO which will be created from an Approved requisition

    Hi,
    We want to create user defined pay items in a complex PO which will be created from an Approved Requisition.
    User will select the approved Req. through WebADI and update the pay Items which will be uploaded and a complex PO will be created with user defined Pay Items.
    Approach 1:
    The API po_interface_s.create_documents is running good but there is one issue with this API as below.
    When we add user defined pay items to the po_lines_locations interface table against a line they are also getting added to the complex PO correctly.
    But the issue is coming when the API is creating default shipment lines and distribution which we dont want.
    Is there any way to stop creating the default pay items and distributions?
    We only want the shipments we have entered in the po_lines_locations interface.
    We can delete the lines from the PO_line_locations and po_distributions base tables for the default lines but that will be the last option to do delete on base tables.
    Approach 2:
    We can also do the same with the open PO import interface but it is not linking the complex PO to the approved requisition from which it is created.
    Oracle mentioned that this is a future enhancement and this functionality is not available in standard PO import prog.
    We are trying for Approach 1 so any suggestions/solutions are appreciated to achieve the requirement.
    Regards,
    Sanket

    UDT cannot be created in sbo-common. You may create new db and work with table in this db (but it will be not UDT, but standard sql table), or create new company db only for this purposes and create UDT there.

  • SAP PM or MM Which will be better

    Hello Everyone.
    I m Yash From Guj. I had done B.E.(I.T.) And workign in IT industry as a Software engg.
    I want to do SAP ,My programming level is not so good so in Technical I choose either BI/ Basis.. But i heard in BI does not have a lot opening and does not a much future growth in future.. People suggest me in Technical Basis is good for me..
    So anyone suggest me Which one is good for future prospects BI or BASIS.
    In functional they told me you can go for either MM/PM..it will be quite hard but a lot openings..
    Technical
    BI/BASIS
    Functional
    MM/PM
    I m bit confused...plzz guide..me...
    Thanks
    Yash

    Hi,
    the IT background self is not enough; you must learn about activities related to maintenance in a plant, which means some mechanical work, leading with staff, tools, services, processing times, suppliers, etc.
    The story is the same in case of MM. You must lead with purchasing, logistics, distribution, disposition of row materials, purchase orders, delivery orders and a long etcetera.
    Chech at [SAP Educatio|https://service.education.sap.com/sap%28bD1lbiZjPTAwMSZkPW1pbg==%29/bc/bsp/sap/hcm_learning/catalog.htm]n the available courses and what is expected in every course from you. Read also in the corresponding forums what PM and MM is all about.

  • Purchasing new HP Photosmart printer which will require new OS X Mountain Lion driver software.  Which steps do I take to install new printer, old printer HP still on iMac.

    Purchasing new HP Photosmart printer which will require new OS X Mountain Lion driver, which installation steps do I take.  Old printer still on iMac.

    Hi Carol 22,
    Thanks for the post.  Depending upon the printer model, print drivers may be available from ASU.  If not, then go to hp.com and download Mt. Lion drivers to your iMac.  After you complete the hardware setup of the printer, if connecting wireless, then connect the printer to your network and then complete the installation and add the printer.  Then you can go back and remove your old printer.  I hope this helps...Good Luck!
    I work for HP but my posts and replies are my own....Thank you!

  • Need to generate a script which will sends an email to users reg cube statu

    Hi All,
    Once the cube gets loaded successfully an email has to sent out automatically thru maxl to users saying that cubes has loaded as off today's date. Could you please help me is their any script available which will automatically sends an email to users that would be helpfull for me.
    Thanks in Advance,
    Raj.

    Raj,
    Here's a good start:
    http://www.network54.com/Forum/58296/thread/1196781565/Maxl+Scripts+to+send+out+email+notifications
    http://www.network54.com/Forum/58296/thread/1106766086/Essbase+Script+Box+-TellingUser+when+the+previous+script+was+run
    http://www.network54.com/Forum/58296/thread/1167815846/Email+notification+through+MaxL
    http://www.network54.com/Forum/58296/thread/1193233965/Automate+the+Email+Notification
    Regards,
    Cameron Lackpour

  • We have many mappings, which one is good in performance wise ?

    We have many mappings, which one is good in performance wise ?

    HI
    Different Mapping Techniques are available in XI. They are: Message Mapping, XSLT Mapping, Java Mapping and ABAP mapping.
    u2022The integration repository includes a graphical mapping editor. It includes built-in functions for value transformations and queue and context handling.  There is an interface for writing user-defined functions (java) as well.
    u2022XSLT mappings can be imported into the Integration Repository; java methods can be called from within the XSLT style sheet. Advantages of this mapping are: open standard, portable, extensible via Java user-defined functions.
    u2022If the transformation is very complex, it may be easiest to leverage the power of Java for mapping.
    u2022ABAP mapping programs can also be written to transform the message structures.
    Message Mapping
    SAP XI provides a graphical mapping tool that generates a java mapping program to be called at run time.
    u2022Graphically define mapping rules between source and target message types.
    u2022Queue-based model allows for handling of extremely large documents.
    u2022Drag-and-drop.
    u2022Generates internal Java Code.
    u2022Built-in and user-defined functions (in Java)
    u2022Integrated testing tool.
    u2022N:M mapping is possible.
    JAVA MAPPING:
    Usually Java mapping is preferred when the target structure is relatively complex and the transformation cannot be accomplished by simple graphical mapping.
    For e.g. consider a simple File->IDoc scenarion where the source file is a simple XML file, whereas the target file is an IDoc with more than one hierarchy level e.g FINSTA01. Content conversion in XI can only create a single level hierarchy, so in this scenario a Java mapping would come in handy.
    See these:
    http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10dd67dd-a42b-2a10-2785-91c40ee56c0b
    /people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
    /people/thorsten.nordholmsbirk/blog/2006/08/10/using-jaxp-to-both-parse-and-emit-xml-in-xi-java-mapping-programs
    When to use Java mapping
    1) Java mapping are used when graphical mapping cannot help you.
    Advantages of Java Mapping
    1)you can use Java APIs and Classes in it.
    2) file look up or a DB lookup is possible
    3) DOM is easier to use with lots of classes to help you create nodes and elements.
    Java mapping can be used when you have complex mapping structures.
    ABAP MAPPING:
    ABAP mappings are mapping programs in ABAP objects that customers can implement using the ABAP Workbench.
    An ABAP mapping comprises an ABAP class that implements the interface IF_MAPPING in the package SAI_MAPPING. The interface has a method EXECUTE with the some signature.
    Applications can decide themselves in the method EXECUTE how to import and change the source XML document. If you want to use the XSLT processor of SAP Web AS, you can use the ABAP Workbench to develop a stylesheet directly rather than using ABAP mappings.
    In ABAP mapping you can read access message header fields. To do this, an object of type IF_MAPPING_PARAM is transferred to the EXECUTE method. The interface has constants for the names of the available parameters and a method GET, which returns the respective value for the parameter name. The constants are the same as in Java mappings, although the constant MAPPING_TRACE does not exist for ABAP mappings. Instead, the trace object is transferred directly using the parameter TRACE of the method IF_MAPPING~EXECUTE.
    For more details refer
    http://help.sap.com/saphelp_nw70/helpdata/EN/ba/e18b1a0fc14f1faf884ae50cece51b/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
    /people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
    ABAP Mapping
    /people/udo.martens/blog/2006/08/23/comparing-performance-of-mapping-programs
    https://websmp101.sap-ag.de/~sapdownload/011000358700003082332004E/HowToABAPMapping.pdf
    /people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
    /people/r.eijpe/blog
    ABAP Mapping Vs Java Mapping.
    Re: Message Mapping of type ABAP Class not being shown
    Re: Performance of mappings (JAVA, XSLT, ABAP)
    XSLT Mapping
    XSLT stands for EXtensible Stylesheet Language Transformations. It is an XML based language for transforming XML documents into any other formats suitable for browser to display, on the basis of set of well-defined rules.
    /people/sap.user72/blog/2005/03/15/using-xslt-mapping-in-a-ccbpm-scenario
    /people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
    The above menotined are the mapping present in the XI.
    When it is critical and complicate we go for the ABAP,JAVA or XSLt mapping. For simple Mapping we go for the graphical mapping.
    the selection of mapping also depends upon the requirement and alos on our scenario.
    cheers

  • I have macbook 5.2 and i am using Mac OS 10.5.8 . which one is good for me to upgrade and how to do that..plz help me

    i have macbook 5.2 and i am using Mac OS 10.5.8 . which one is good for me to upgrade and how to do that..plz help me

    You have a 13" Early or Mid 2009 MacBook. Either one can run OS X Mavericks with enough RAM, 2 GB minimum. But first you will need to update to OS X Snow Leopard 10.6.8 so that you have the Mac App Store installed on your MacBook
    Buy this from apple;
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    Then download and update with this update combo;
    OS X Snow Leopard 10.6.8 v1.1 update combo
    http://support.apple.com/kb/DL1399
    After this you will have the Mac App Store on your MacBook and you should be able to download and install OS X Mavericks for free!
    Your MacBook must meet these minimum tech specs to run Mavericks;
    http://support.apple.com/kb/HT5842

  • I have a new iPad 2 which will not connect to my wi fi despite a new router being installed. When I tap my network name (which is with TalkTalk) the message comes up "unable to join the network TalkTalk etc...)

    I have a new Apple iPad2 which will not connect to my wi fi despite a new router.  When I tap the correct address it comes up with the message "Unable to join the network TalkTalketc... It does connect in other peoples' houses . Am I right in thinking that the trouble is with TalkTalk?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for