Appropiate way for sending an XML Structured file to the Queue

Hi
I am reading all my Database Table data and construcing an XML file .
Now i want to send this XML file to the MQ (Queue ) as destination .
Please tell me what will be the best approach in these two cases :
1. Construct an XML file and store it in a drive (say with file name as Ravi.xml) and then pick that with the help of File API and send it as an attachment to the Queue
(I dont whether this is possible also sending a attachment to the Queue )
2.Use the ByteMessage /TextMessage Construct an XML file dynamically with the help of DOM API and post that Message to the Queue .
Please help . I am still doing R&D on this .

duplicate post. http://forums.sun.com/thread.jspa?messageID=10896758&#10896758

Similar Messages

What is the best way to send large, HD video files from the iPad?

Hello,
My department is looking to purchase between 50 and 150 new iPads. We hold conferences where participants take short, 3-minute videos of themselves in situations they have been trained for. The idea was that after they have taken the video, they could simply email these videos to themselves, negating the need to hook the device up to a computer, transfer the video over to a flash drive, and ensure that drive gets back to the right person.
Now that I have the first one, I'm finding any video longer than 45s or so can't be sent via email because it's too large.
Are you kidding?
The file I was just able to send was 7.5MB. That's the biggest video I can send from this thing? Why even give us the ability to take HD video if we can't *do* anything with it?
But, I digress.
What I'm looking for is the best way to get video off the iPads and into the hands of our participants. Are there apps on the App Store which might convert whatever video we take to an emailable size? I thought about setting everyone up with Apple IDs and having them use iMessage since there is no limit on file size, but of course you must own an Apple device in order to do that, and it still doesn't solve getting it on their computers.
Any help here would be greatly appreciated.
Thanks!
--Rob

You could try uploading them to a joint dropbox account that they could then download them from....but how fast it is will depend on the internet connection available.

Is there a way to send a large video file through email, not using websites?

Hey guys,
Just wondering if there is an easy way to send a large video file through email, not using websites such as yousendit.com.
If anyone knows please respond, would be greatly appreciated! Thank you

No there isn't. Most all Email providers, whether your ISP or some other provider like Google, Yahoo, Microsoft with their Outlook.com or Office365 and Apple's own iCloud system, have a linit on the max size a email can be. Most are around 10MBs some slightly larger but if the vieo you want to send to someone it larger than that you will have to upload it to a website and then have the people you want to view it download it from that website.

IMovie for Mac: "iMovie cannot open files in the "iMovie for iOS Project" format."

Question, asked professionally
When will iMovie for Mac be able to open iMovie for iOS projects?
Question, asked snarkily
Any reasonable expectation that we will ever be able to edit projects--created in iMovie on our fancy new expensive phones--in iMovie on our fancy new expensive laptops?
Specs
iPhone 6 Plus (contract-free, 128 GB)
iOS 8.1.2
iMovie for IOS 2.1.1
MacBook Pro (Retina, 15-inch, Mid-2014)
OS X Yosemite 10.10.1
iMovie for Mac 10.0.6
Error Messages
iMovie for Mac: "iMovie cannot open files in the "iMovie for iOS Project" format."
iMovie for iOS: "An error occurred during export."
Frustration
Manufacturer: Apple (a multibillion dollar company)
The year: 2015
Hours lost: Three Weeks
Total costs for both devices: $4,000
Background Details
I just wasted thousands of dollars on these two hardware devices by making the rookie mistake of assuming projects were compatible across iMovie applications. However, the exported .iMovieMobile project files are in an incompatible iMovie for iOS Project format that iMovie for Mac cannot import. So I am stuck with a 15 GB .iMovieMobile project file--for an hour-long+ video--that I created and I was editing on my iPhone for weeks that I can no longer edit on my iPhone due to an error, nor potentially rescue the lost hours on my Mac, the sole reason I purchased it one day ago. The reason I can no longer edit the project on the iPhone is because iMovie for iOS suddenly stopped displaying the video of the project in preview, external display, etc. The clip snapshots remain visible and the audio remains audible, but the video appears fully black. Any attempt to export the video at any resolution generates an error message. (This error applies only to this project; other projects export without issue.) I can save to and from iTunes or iCloud without issue, but import into iMovie for Mac is unavailable for this latest version. Deleting and reinstalling the app does not resolve the issue. Nothing has resolved this issue; so I purchased the Mac as a last attempt, and it appears that I will have to begin the meticulously painful process of recreating the video from scratch with all the titling, sound effects, precise edits, transitions, organization, etc. This video was to surprise my mother for her birthday with "this is your life" footage, including my late father. It may seem like a small first-world problem, but such things carry big emotional impacts. What began as such a wonderfully intuitive and joyful experience has descended into a soul-suffering nightmare of catastrophic proportions. This software grinch stole christmas.
Likely Suspect
I believe this originated from Apple's confusingly designed iTunes client that removed videos used by iMovie for IOS during a sync, which I successfully restored back to the iPhone. This apparently resulted in iOS seeking and then claiming to find all of the videos, but somehow a bug in the coding causes the audio to play but not display video, and no way to resolve the bug from an enduser standpoint. I was hoping that iMovie for Mac would allow me a workaround, but I'll never know because the iOS and Mac formats are currently and dishearteningly incompatible.
Suggestions
I never performed a full backup of the iPhone, but I don't believe any of the iCloud nor local backups actually backup iMovie projects themselves anyway. (That's a fail.) So one must back them up manually to iTunes or iCloud.
MANUALLY BACKUP YOUR PROJECTS DAILY, IF NOT HOURLY.
MANUALLY BACKUP YOUR PROJECTS BEFORE IMPORTING OR SYNCING FROM ITUNES.
MANUALLY BACKUP YOUR PROJECTS BEFORE IMPORTING VIDEO CREATED OUTSIDE OF YOUR IOS DEVICE.
Resolutions
Hope Apple fixes this problem soon? Perhaps.
Return the Mac to Apple, if they allow? Perhaps.
Someone in this community will provide a magical workaround--that I haven't already attempted? Perhaps.
As unlikely these options may be, I shudder to imagine that I may be forced to suffer no resolution and $3,000+ completely down the drain, because if iMovie for IOS worked as intended, I wouldn't have ever purchased the Mac as a last ditch effort to rescue the project. It meant that much to me to surprise my mother by attempting to retrieve this project file from oblivion--but to no avail.

I appreciate you taking the time to copy and paste boilerplate responses to increase your points in this forum, but I've already read all those support articles in depth; but you have barely read my post at all. Please don't guess a fix. Only someone with the latest versions of iMovie, iOS, iPhone, Yosemite, and MacBook Pro is qualified to troubleshoot this, because anyone would immediately see that the following option no longer exists:
Open iMovie on your Mac, and choose File > Import > iMovie for iOS Project.
Read my post before you reply: It clearly says in the title and within my post that I can neither export nor import through iTunes without receiving an error message. So your response neither solved my question nor helped me whatsoever.

About the exporting and importing xml data file in the pdf form

Hi all,
I need help for importing xml data file in the pdf form. When I write some thing in the text field with fill color and typeface (font) and exported xml data using email button. When I imported that xml file in the same pdf file that is used for exporting the xml data then all the data are shown in the control but not color and font typeface. Anyone has suggestion for solving this problem. Please help me for solving this problem.
Thank you
Saroj Neupane

Can you post a sample form and data to [email protected] and I will have a look.

Is there any way to send more then 1 parameter to the listener function?

Hi guys, so is there any way to send more then 1 parameter to the listener function?

Hi,
sure.
The first variant is to add many parameters to event.
The second variant is to extend calling callback functions.
For example,
public function addCallBack(eventName:String, callBack:Function = null, ... rest):void
     // save callBack function and event type and other args (rest)
     addEventListener(eventName, myHandler);
private function myHandler(event:Event):void
     // get function and args by eventName
     fnc.apply(null, [event, args]);

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

In my ipad email address which I am using for sending mail is appearing differently in the receipents mail box ! how to resolve that

in my ipad email address which I am using for sending mail is appearing differently in the receipents mail box ! how to resolve that

while sending a email in my ipad it is showing the correct email address([email protected]) in the ""from"" field but in receipients inbox ""from"" field it is showing another email id ([email protected])

Can't drag files into the queue window on some computers

For some reason, on my new desktop and my laptop. I cannot drag files into the Queue window in Media encoder. I have tried dragging avi's, wav, and mp4. As the files I am dragging hover over the queue window, my mouse turns into the "circle with a line through it" pointer and I cannot add the files that way. I can click the plus sign and then browse to its location to add. I just want to have my drag n drop feature working again... Any ideas why i can on some computers and not others?
I did try running media encoder as administrator. All my computers are running windows 8.1.

do you have source patching turned on for audio?

Any way to import Entourage XML **cache** files from its database to Mail?

I had a really bad meltdown and all I could retrieve from my address books (yes, I backed up, no it failed too) were Entourage XML cache files of my addresses and emails. They exist as "pointers" to originally stored info, not the info itself, so I cannot simply import them as tab delimited, or text, because of all the tags (or without a helluva lot of work editing) - however all the info is there. This looks to me like XML right? So is there someway to simply convert into another program - an in between convertor? editor? - that could get them to tabbed format. Here's what an address looks like to give a sense what I'm dealing with. Thanks for any suggestions.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>commicrosoft_entouragefirstName</key>
<string>Bilbo Baggins</string>
<key>commicrosoft_entouragehomeStreet</key>
<string>Shire</string>
<key>commicrosoft_entouragejapanese</key>
<false/>
<key>kMDItemContentModificationDate</key>
<date>2007-12-04T05:21:26Z</date>
<key>kMDItemEmailAddresses</key>
<array>
<string>[email protected]</string>
</array>
<key>kMDItemTitle</key>
<string>Bilbo Baggins</string>
</dict>
</plist>

I've done a few test runs and the video quality seems pretty decent considering the quality of some of the original VHS recordings, but a "rough around the edges" look is noticeable when the source tape wasn't the best quality to begin with.
If converting the .asf file compromises quality further then I'll avoid that. The device seems at least like a great starting point for doing something with all of those old tapes. I figure I can at least experiment in the meantime and save up to get a more Mac friendly device that does the more direct conversion. At the very least I can get my old video projects from VHS onto DVD and work with them later on in iMovie.
I'm just a little irked that every now and then there's hardware or an application that is made PC only, almost like the manufacturer doesn't even realize that Macs even exist. The device wasn't made by Microsoft or one of the major PC makers, so I don't get not making it so that the video files are saved as mpeg4 instead of .asf
Now that I think about it, how common are SD cards outside of digital cameras (still and video cameras both seem to use them)? I have a camera that uses an SD card and if I didn't have the video converter, I wouldn't have known about using the cards for something other than pics or camera footage, and I wouldn't have known about needing a card reader because the camera plugs into a USB for downloading pics.

Does LABVIEW support general xml structure file operations?

Hi,
I had gone through lots of posts regarding the xml with LABVIEW.But I'm still not convinced with whether LV can handle xml file read
(the reason is ,I understand that u can generate an xml file with LV and read it back with minimal effort).
In case if a xml file is created by a different application,can LV read it & display & How easy is that task?
please let me know do i need any library files for it.I had downloaded MSXML 1.5 toolkit and gone thru the vi's,but still i didn't find a concrete program for doing a simple read/edit for any xml file already created.
Thanks in advance,
-Murali

Hi,
Thanks for the support.
My xml was corrupted so it wasn't able to load it.Anyway i was able to load it & display the records(because of your support),I updated a record as you said and saved it.But when i reload it,modified record is once again included in last with modification(that means details of lodder was present with phone number as last record once again).
Anyway i would more interested to know if i can get details of any particular node from xml file.
for example:If i provide input as HOME_ADDRESS(of personneldemo xml file),i need details like Street address, phone number etc of that node.
Help on this will be greatly appreciated.
Thanks in advance

How can i send a XML document object over the JMS wire

          HI,
          does anybody has anyidea about sending the XML Document over the JMS and receiving
          it n the other side..
          regards,
          Akhil


Is this the full stack trace?
          Akhil Nagpal wrote:
          > HI ,
          > Sorry the excepiotn is of deserialization...this is the stack trace...mistake...
          >
          > weblogic.jms.common.JMSException: Error deserializing object
          > at weblogic.jms.common.ObjectMessageImpl.getObject(ObjectMessageImpl.java:140)
          > at com.sds.kb.cm.CMMDBReceiver.onMessage(CMMDBReceiver.java:143)
          > at weblogic.ejb20.internal.MDListener.execute(MDListener.java:356)
          > at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:290)
          > at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:271)
          > at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2303)
          > at weblogic.jms.client.JMSSession.execute(JMSSession.java:2226)
          > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
          > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
          > ----------- Linked Exception -----------
          > weblogic.jms.common.JMSException: Error deserializing object
          > at weblogic.jms.common.ObjectMessageImpl.getObject(ObjectMessageImpl.java:140)
          > at com.sds.kb.cm.CMMDBReceiver.onMessage(CMMDBReceiver.java:143)
          > at weblogic.ejb20.internal.MDListener.execute(MDListener.java:356)
          > at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:290)
          > at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:271)
          > at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2303)
          > at weblogic.jms.client.JMSSession.execute(JMSSession.java:2226)
          > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
          > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
          >
          >
          > Akhil
          >
          >
          > "Akhil Nagpal" <[email protected]> wrote:
          >
          >>HI,
          >> Actually i have created my own class which implements serializable.
          >>I set the
          >>object of this class in the ObjectMessage and send it across. Sometime
          >>i have
          >>to send some vector,sometimes string and sometime a XML document. So
          >>i can set
          >>these type of objects in my custom serializable object and send it. For
          >>sending
          >>XML , either i can send it as a string or as u said as Document object.
          >>But i
          >>want to do send it as a Document object. So i have created a an object
          >>of "org.jdom.Document"
          >>which implement serializable and setting this object into my custom object
          >>and
          >>sending this custom object in the objectmessage. But then weblogic throws
          >>some
          >>exceptions which has nothing to do with serialization.I am printing the
          >>exception
          >>below. (without the object of org.jdom.Document this custom object reaches
          >>safely
          >>and happily:))...this exception is something related to transactions.....can
          >>you
          >>or anybody tell me what could be the reason..
          >>I am not able to think why this kind of exception comes only when i try
          >>to send
          >>the jdom's Document object and never in other cases..
          >>
          >>java.sql.SQLException: XA error: XAER_RMERR : A resource manager error
          >>has occured
          >>in the transaction branch start() failed o
          >>n resource 'oraclePool': XAER_RMERR : A resource manager error has occured
          >>in
          >>the transaction branch
          >>oracle.jdbc.xa.OracleXAException
          >> at oracle.jdbc.xa.OracleXAResource.checkError(OracleXAResource.java:483)
          >> at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:190)
          >> at weblogic.jdbc.jta.VendorXAResource.start(VendorXAResource.java:41)
          >> at weblogic.jdbc.jta.DataSource.start(DataSource.java:569)
          >> at weblogic.transaction.internal.ServerResourceInfo.start(ServerResourceInfo.java:1165)
          >> at weblogic.transaction.internal.ServerResourceInfo.xaStart(ServerResourceInfo.java:1108)
          >> at weblogic.transaction.internal.ServerResourceInfo.enlist(ServerResourceInfo.java:287)
          >> at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:391)
          >> at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1146)
          >> at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1101)
          >> at weblogic.jdbc.jta.Connection.getXAConn(Connection.java:145)
          >> at weblogic.jdbc.jta.Connection.createStatement(Connection.java:204)
          >> at weblogic.jdbc.rmi.internal.ConnectionImpl.createStatement(ConnectionImpl.java:130)
          >> at weblogic.jdbc.rmi.SerialConnection.createStatement(SerialConnection.java:71)
          >> at com.sds.kb.cm.CMMDBReceiver.onMessage(CMMDBReceiver.java:134)
          >> at weblogic.ejb20.internal.MDListener.execute(MDListener.java:356)
          >> at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:290)
          >> at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:271)
          >> at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2303)
          >> at weblogic.jms.client.JMSSession.execute(JMSSession.java:2226)
          >> at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
          >> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
          >>
          >> at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1151)
          >>
          >>
          >>any help will be appriciated..
          >>Akhil
          >>
          >>
          >>
          >>Raj <[email protected]> wrote:
          >>
          >>>wrap it up as an object message(I think DocumentImpl is Serializable).
          >>>This way you
          >>>wont be vendor specific and can retrieve it at the other end.
          >>>
          >>>Akhil Nagpal wrote:
          >>>
          >>>
          >>>>HI Raj,
          >>>> thanks for the response..actually we dont want our application
          >>>
          >>to
          >>
          >>>be weblogic
          >>>
          >>>>specific...
          >>>> there should be some other way arround....
          >>>>
          >>>>REgards
          >>>>Akhil
          >>>>
          >>>>"Raj" <[email protected]> wrote:
          >>>>
          >>>>>There is a weblogic specific XMLMessage similar to ObjectMessage,
          >>>>
          >>>BytesMEssage
          >>>
          >>>>>etc.. Try using that to wrap ur XML document and send it across.
          >>>>>
          >>>>>-Raj
          >>>>>
          >>>>>"Akhil Nagpal" <[email protected]> wrote:
          >>>>>
          >>>>>>HI,
          >>>>>>does anybody has anyidea about sending the XML Document over the
          >>>>>
          >>>JMS
          >>>
          >>>>>>and receiving
          >>>>>>it n the other side..
          >>>>>>regards,
          >>>>>>Akhil
          >>>>>
          >

Send part of audio file, not the entire file, from FCP to STP

Is there an easy way to send only part of an audio file to STP as an audio file project from FCP 5.1.2?
Everything that I've tried so far always sends the entire audio file for processing in STP.
1) using the blade tool to slice the audio
2) creating a subclip of a piece of audio
3) setting in/out points in both the timeline and the viewer
I realize that I could export the piece of audio and then import that into FCP and then send that to STP, but that is a lot of work.
Is there an easier way?
Thanks,
Richard
G5 Dual 2 gig Mac OS X (10.4.8) 4.5 GIGS RAM

Maybe one of these work:
* LeechBlock: https://addons.mozilla.org/firefox/addon/4476
* BlockSite: https://addons.mozilla.org/firefox/addon/3145

Is there a way to share ai or psd files using the cloud with non-cloud clients?

I am interested in sharing the progress of a work in progress. I have not used the cloud file storage yet and was wondering if there is a way to give clients access to a specific files using the cloud.

Yes. Files are either Private or Public. Once a file is made Public anyone with that url can see the page for the file. You can control whether comments or dowloading of the original file is allowed.
Your client does not need an Adobe ID to view the page, just a web browser.

Best way to send an procedure/function output to the application

Hello,
What is the best way to send the output of a PL/SQL function / procedure to the application in Oracle 11g. I understand that it could be different for applications built in JAVA , .Net , SAP etc.
Could you please give a brief overview on all possible application makes.
Thanks,
Haider

Anyway, the answer is yes, v$version is derived from x$version :
SQL> desc x$version
Name                                      Null?    Type
ADDR                                               RAW(8)
INDX                                               NUMBER
INST_ID                                            NUMBER
BANNER                                             VARCHAR2(80)
SQL> select INDX,BANNER from x$version;
      INDX
BANNER
         0
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
         1
PL/SQL Release 11.2.0.3.0 - Production
         2
CORE    11.2.0.3.0      Production
         3
TNS for Linux: Version 11.2.0.3.0 - Production
         4
NLSRTL Version 11.2.0.3.0 - Production
SQL>

Appropiate way for sending an XML Structured file to the Queue

Similar Messages

Maybe you are looking for