Approval for PO
Dear all,
I am new to workflow .
I am doing one scenario ,in that 5 level of approval.i am completed the first level.
approving the first level The approver give the comment and attachment in the mail i need to forward that to next level and in next level also they will enter the comment and attachment in the same mail and i need to forward that to next level with all the comments that had entered in previous levels.Its like a loop mail.
I need some Demo workflow for this scenario.
Urgent one .Hope u r all help for this.
Message was edited by:
Raja Ram
Dear Saurabh Anand,
Thanks a lot for ur help in time.I am new to workflow this is my first development.
My full scenario is i want to sent one sheet PDF to 5 level of approval.
i am started with event triggering form program it working fine.Second one is activity in that i am given one method to convert report output to PDF ,this is the sheet and it goes to the correct person and it is also working fine.
Third is my user decision to approve the sheet, Here i need to give the option for attachment and comment to enter.When the user want to give the supporting document for approval or reject for the sheet.
I am don't no how to give the option for attachment and comment to the user and also i need to forward that comment and attachment to next level.
Can anyone please suggest me a possible solution ?
Give any related document or model workflow.
Please help me out its urgent.
i will give maximum rewards,
thanks in advance,
Thanks,
Raja
Similar Messages
-
How to change default approval for ResourceAuthorizerApproval ?
Hi,
I'am new in OIM and I follow documentation where I found some predefined workflows. I'd like to use them.
Could you tell me, step by step, how to change default approval for ResourceAuthorizerApproval (only for my new defined resource).
I'm using OIM 11g and Design Console 11.1.1.3.0.2.0Ok, I made new tamplate (copy of existing one), there I changed Template Level Approval Process and set allowed resources. It seems to be ok :)
If there are other solutions please share with me
Thanks
M. -
Approval for deviation from credit limit
Hi Guys
Approval for deviation from credit limit does not work in the following scenario.
Credit Limit = R20000
Balance = 0
Sales order added for R18000, no approval needed as less than credit limit.
Then user changes the Sales order amount to more than the credit limit and no approval is activated.
Any ideas? They are on 2007A SP 01 PL 7
ThanksHi,
Check below thread:
Credit limit approval
Approval for exceeding credit limit for particular bussiness partners
Hope this will help you.
Thanks,
Neetu -
Auto approval for self registration request in OIM 11G R2
Hi all,
We have a requirement where we want end users to be able to self-register without needing any sort of approval. We are using OIM 11G R2 with the latest patchset.
The way to do it in 11G R1 is explained in the following document:
[http://docs.oracle.com/cd/E21764_01/doc.1111/e14316/unauth_selfservice.htm#BABFEIBF]
But now that R2 does not have any request templates, we are not sure how to do this. Any help will be greatly appreciated. Thanks for your time.
-sandeepcrefer this.
Configuring Auto-Approval for Self-Registration - Fails due to Organisation -
Hi ,
I want to get the approver for the request using OIM api.Can u please suggest me how can I achieve that if I have have the request key.Or please suggest me how can I achive that..please provide me some sample code...
Thanks.Hi buddy,
here is so many ways you can find out approvers list in SRM . in SRM there is a badi where you creating approver list and some g table is there that having approvers names . because in each organization there some customization in SRM so you have to find out that table u can get it from approvers badi . so please check there......
Thanks.
Girish Goyal -
Process Controlled Workflow - 1-step approval for shopping cart approval
Hi,
I have configured a one-level approval for SC (Process Controlled Workflow):
Object Type: BUS2121
Additional 1 level under schema: 3C_SC_600_000 (the last level is the automatic approval)
Level Type: Approval with completion
Eval ID: 0EV_SC_SL1
RR Name: RR_SPENDING_LIMIT_APPROVER
RR Param: USTONY.Y (I hardcoded it using my user ID, for the moment)
Task ID: 40007953 (I have checked, it's generalized as well)
Decision Type: Item-based decision for entire document
For PPOMA_BBP:
Under my org unit (Position):
Approval Limit: 1000
Output Limit: 1000
I didn't do any BADI implementations yet.
During creation of SC by other user, before "Order" the SC, the approval preview can show correctly that the Processor is as indicated in the config.
Once the SC is ordered, the whole step is gone and the event linkage becoming delinked (because there is error, and according to the config in SWEQADM).
However, I cannot find the workitem (no workitem generated) and SLG1 does not give any clue whatsoever.
I tried debugging method APPROVAL_LIMIT, and it seems fine as well.
Please help, what did I do wrong here?
Thanks,
Tony YHi Sahil,
I even changed to first process level to:
Level Type: Approval
Eval ID: 0EV000
RR Name: RR_MANAGER
RR Param: (Blank)
Task ID: 40007953 (I have checked, it's generalized as well)
Decision Type: Decision for entire document
Under PPOMA_BBP:
I made myself as a head of the org unit with the role manager.
The requester is "Exclude" the role manager.
The agent can be determined now.
But the workitem ID is still cannot be generated. It's always no workitem generated.
Please everyone, any help?
Thanks in advance,
Tony -
My client required Approval for Vendor Invoice Payment from senior person. How can i configured this scenario in sap AP?
Pls ReplyHi,
Please check this link:
[Workflow for Payment Release|http://www.google.co.in/url?sa=t&rct=j&q=workflow%20for%20payment%20release%20sap&source=web&cd=1&ved=0CBsQFjAA&url=http%3A%2F%2Fhelp.sap.com%2Fprintdocu%2Fcore%2FPrint46c%2Fen%2Fdata%2Fpdf%2FFIBP%2FFI-AP-AP-RP.pdf&ei=QdjETqe6Ds-xhAfv6NSEDg&usg=AFQjCNGlK2kUdPUyvPIgG32Ulni3ks9tuA&cad=rja]
Regards,
Jigar -
Report - who is the current approver for purchase requisition
Hi Experts
Is there a report that can give information the status / who is the current approver for purchase requisition?
currently if we open the PR directly, we can only know the release strategy, release code, status of approver, but we cannot have the information who is the person that should approve this PR.
Thanks in advance
Prashanth.vHi All.
Unfortunately we want to have this information for our end user, and they will not have the access to SE16.
Another thinks is from CDHDR we will have the information if changes are made in PR. So it will give information user that already approve the PR
What we want to have is a report of outstanding PR (not yet released) that have information who is the user (the user complete name / user id) that should approve the PR.
Thanks In Advance
Prashanth.Venkategowda -
Dear OM Gurus,
How to setup approval for a sale order?. I believe that the standard functionality is only for negotiation flow and return....
Thanks & Regards
Merlin RajeshNote:363517.1
Regards
Prashant Pathak -
Approval for cheque while payment
hi
I require the approval for cheque while payment to vendor. guide me how to do that. before every check printing we need approval from the higher authority.
Thankshi all,
i started this project again after so long break....,
my steps to complete this task-
i copied the program / report- sapf110o to z* and started building the whole scenario. and will try to assign the workflow as well which is related to miro , ws20000397(but still not sure).
logic:
only for invoice payment.
only date as selection my program will show all the proposal on that date. in second screen vendor level approval is available and in third level detailed level approval is available.and in third screen you can cross check accounting document or display miro.
it has three level approval, will update table and this will trigger workflow(while running f110) so need to do some enhancement on f110 as well to trigger workflow.
thanks and reg,
Ahmed, -
Mass Approval for Leave in UWL
Dear Gurus,
we are facing issues in mass approval for leave process in our UWL. we have customized the xml file and added approve and reject columns in the table. this is all in a new custom view that is designed and uploaded with high priority.
when selecting radiobuttons and clicking submit, Task disappears from UWL and moved to outbox in SAP Inbox.
But the document status is "SENT" and not changing to Approved /Rejected. Workflow Status is showing as completed.
Any clue.? Do we need to change the Workflow to accept the user decision via UWL. Any Container/parameters to be updated in addition?
<Action name="approved" userDecision="yes" handler="UpdatingContainerHandler" referenceBundle="com.sap.pct.erp.mss.leaverequest.approve">
<Properties>
<Property name="_WI_OBJECT_ID.STATUS" value="APPROVED"/>
<Property name="_WI_RESULT" value="A"/>
<Property name="_RESULT" value="A"/>
</Properties>
</Action>
<Action name="rejected" userDecision="yes" handler="UpdatingContainerHandler" referenceBundle="com.sap.pct.erp.mss.leaverequest.reject">
<Properties>
<Property name="_WI_OBJECT_ID.STATUS" value="REJECTED"/>
<Property name="_WI_RESULT" value="R"/>
<Property name="_RESULT" value="R"/>
</Properties>
</Action>
Kindly help
Regards,
AnkurDear All,
An Update. although workitems go away from manager's UWL, the leave status of the employee remains "SENT" and does not change to "Approved".
this is because from 3 steps that are allowed in workflow Accept(approved), reject(rejected) and cancelled(error step), the workflow progresses to step 3(cancelled).
I checked with workflow consultants and they checked everything and reported that this requirement cannot be handled by changing the workflow as enough information is not passed to them to change the status of the particular leave in the tables...
Kindly advice, if this configuration could work, or we need to go for custom development to create a new portal applicaton along with adaptive RFC's? in this case it will be a big and time consuming process in itself.
regards,
'Ankur Agarwal' -
Documenting Approval for Scrapping
What is the process in SAP to document the Approval for Scraping before posting movement type 551.
As per compliance department, we are asked to document all the details including necessary approvals before actually posting the scrapping movement using movement type 551.
The approval document can include material, qty, storage location and cost object i.e. Order or Cost Center and Approver Name.
Once approved the actual movement type will be posted by store clerk who will have authorization for given storage location and movement type 551.
Regards,Hi,
There is no ready made Release strategy type approval process of available to configure relating to posting of 551 document, I would say even for posting any inventory documents.
You have to design & program a new enhancement to achieve this functionality. It can be like a new transaction code that will open up a screen where-in the user can enter the necessary data for posting 551 documents which can be sent to the approver using workflow, and then trigger the posting of the document using BADI by way of using the approval as trigger event.
This is one way, there are other ways too..
Ramesh -
N level-Approval for contract workflow (WS14000148) in SRM
Hi SDN'rs
I want to activate N level-Approval for contract workflow (WS14000148) in SRM
When I am creating the contract in SRM I can see the approvers in the approval preview.
But when I release the contract and look at the approval privew there are no approvers
and the status of the contract is released.
We are on SRM Server 5.5 and SP 07.
Here what I did
1. I implemented the BADI 'BBP_WFL_APPROV_BADI' using the sample implementation and populated the approvers.
2. I activated events SAVED,CHANGEVERSIONSAVED for WS14000148 in OOCU transaction.
3. I see event linkages for WS14000148 for both events SAVED,CHANGEVERSIONSAVED in SWE2 transaction.
4. I assigned role SAP_EC_BBP_PURCHASER to for subworkflow N step for contract WS14000147.
( User who is creating contract has this role)
5. Consistency check for WS14000148 is green and WS14000147 is yellow in SWUD
6. Event simulation for BUS2000113 and events SAVED,CHANGEVERSIONSAVED shows WS14000148 successfully started.
I see dump in ST22 with errors TSV_TNEW_PAGE_ALLOC_FAILED and SYSTEM_NO_SHM_MEMORY with WF-BATCH is this any thing to do with that?
If any one know what are the steps I am missing please let me know.
Thanks
A SHi
Please refer to these OSS notes which might help.
<u>Refer to following OSS Notes -></u>
Note 735026 - Memory problems at BBP_GETLIST_INDEX_FILL
Note 932836 - BBP_GETLIST_INDEX_FILL: Activation not possible
879528 WS14000148: Send mail to initiator incorrect
901200 WS14000148 dia wrk item despite NO_FURTHER_APPROVAL_NEEDED=X
879873 BUS2000113: The Object_ID attribute may be empty
903015 BAdI Workflows: Events and parallel steps
901068 BAdI Workflows: Enhancement of Note 896556
769458 Dynamic workflows: No adjustment after document change
972757 Occurence of the SYSTEM_NO_SHM_MEMORY runtime error
741864 FinBasis: Termination TSV_TNEW_PAGE_ALLOC_FAILED
864473 Deactivating the shared memory when searching by prefix
928642 Container factory: Shared memory dump update
Refer to these links.
<b>http://help.sap.com/saphelp_srm50/helpdata/en/2c/e68d406b305537e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/26/0f8b41ed891609e10000000a155106/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/6b/eca441eea7ef0be10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/f7/a6a3415e34b05fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/6b/eca441eea7ef0be10000000a1550b0/frameset.htm
</b>
<u>Also raise an OSS message with SAP as well.</u>
Regards
- Atul -
Approval for each phase in task
Hi Everyone
I am using task list to create Projects. I have field named - "Phases" with values of Planning, Monitoring, Executing, Closing.
I want to have approval for each phase from approver. Need suggestions on how do I show each approval for each phase for project? Should I create different fields for each approval? I can create approval workflow so that when user change phases it will send
out an e-mail to approver, but how user will know which approval is for which phase while looking at project item in the list.
Your suggestions are appreciated.
ThanksHi Swetha,
For your situation, once any phase is approved, you could send an email to notify task creator the certain phase is approved.
If you need to let users who can access the item know the approved phases, you might add some other fields in the list. For example, add the multiple choices that has:
Request Initiation
Initiation approved
Request Plan
Planning phase approved
Request Closure
Closing phase approved
And add an extra action in workflow to change the field's value per the approve status.
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
So i have been Pre-approved for a Barclaycard Rewards mastercard, if i sign up for this will i be able to buy an imac with the 18 moth financing option?
I don't see why not.
Apple is not picky where the money comes from.
Allan -
Parallel approval nest sequent approval for SC
Dear All
I am using SRM7.02.
I can realize parallel approval for SC as following.
only after A1 and B1 approved. the process will end or enter next level.
But , the customer gave me a new challege, as the following.
The work item is sent to A1 and B1, after A1 approved , A2 would receive the work item. after B1 approved, B2 would receive the work item.
Only after both A2 and B2 approved. the process end or enter next level.
any experts can give me some suggestion?
thanks in advance
JesseHi Jesse,
Even our clients in my earlier project, asked for a similar workflow. But SRM workflow wont support that because there are few scenarios which makes things complex. For example, when we have a combination of type 1 and type 3 approvals in a single flow, a part of the document reaches type 1 approver and a part doesn't. And also if a cart items are distinguished into one set in approval level 1, and they can be in different sets in next level even if all approval levels are of type 3 or type 4.
Regards,
Karthik babu
Maybe you are looking for
-
HT1766 How to restore an IOS7 back up to a new replacement Ipad2 that came with IOS6.3
Hi all I have just replaced my wife's broken Ipad2 with a replacement Ipad2 from our local Apple Store. The new IPad 2 came with IOS 6.3 but the old backup was in IOS7.4 I have set up the new iPad with Ios7.4 as in its native state it wouldn't restor
-
How do I change the password of a sparseimage?
I searched for an answer to this question, but the information I found was out of date. Apparently there used to be a "Change password" item in the "Images" menu of Disk Utility. Now (under Mac OS 10.7, a.k.a. Lion) it seems there's just a "Change" m
-
Is the OS using parentalcontrolsd: RemoteService and xpcd: for Maintenance ?
I'm trying to flush out some weird OS activity that I just started noticing on my (3) different 10.9.5 Mac platforms. Is the OS using parentalcontrolsd: RemoteService and xpcd: Interprocess Communication and Services to launch scan, observe, I/O mess
-
Once again, how to close file marked "edit in process"
I have several times searched for answer on this, and the same thing keeps happening to me. I open a jpeg in Organizer and then mvoe to edit. BUt then I can't figure out how to save it or close it or whatever you are supposed to do. I just got thr
-
Hi all, I am trying to setup proces to track SO through process of purchase. Much like 3rd party sales processing w. shipping notification with difference that I need to receive goods on stock not on SO consumption and afterwards to ship it away. I t