Approval for storage location to storage location or plant to plant movemen

Hi all,
Our client's requirement is when goods transfer from the storage location to storage location with movement type 311 or plant to plant with movement type 301, untill & unless the authorised person at the receiving end approves it, the movement should not be happened?
How to map this? Any release strategy?
Thanks in advance.
SmanS

You can map the process in SAP using 2 step stock transfers.
Storage location 1 313 movement type - it will be in transit until you do receiving in the receiving storage location 2 using movement type 315
Similarly for plant to plant movement type 301 and 305.
There is no customization available in SAP to do this with the single step stock transfers that you are currently using. 
Thanks and Regards,
Maheshwari

Similar Messages

  • BADI for storage location restriction in IW32

    Dear All,
    I am working on one scenario in this user has to get the error message :-
    1. Whenever he doesn't enter the Storage Location in Component Tab (in IW32) and also he should not be able to save the Maintenance Order.
    2. There is ZTABLE (ZTPM058) , if there is no entry of the Storage location in the ZTABLE then also he should get the error.
    I have used the BADI BADI_DI_PCS2_1 to do this but the problem is when the user enter the component manually then it works fine , but when he selects the component from List button (it is in the bottom of the component tab screen) , then this BADI doesn't work correctly.
    Basically when the user selects component from List  then it should first put data into the component tab and then give the error . but this is not happening.
    Please suggest what can be done.
    Below is the code that I have  written :-
    l_ucomm = sy-ucomm.
    if diad_resbd-MENGE is not INITIAL.
      SELECT SINGLE ingpr         "Plant Section
                    lgort         "Storage Location
              INTO  (l_ingpr,
                    l_lgort)
              FROM  ztpm058
             WHERE  lgort = diad_resbd-lgort
               AND  ingpr = diad_caufvd-ingpr.
      IF sy-subrc <> 0.
    if l_ucomm <> 'IMKL'. 
       CONCATENATE 'FOR ITEM NO'        diad_resbd-posnr
                   ', COMPONENT'                   diad_resbd-matnr
                  'AND PLANNER GROUP'       diad_caufvd-ingpr
                 'THERE IS NO STORAGE LOCATION'  diad_resbd-lgort INTO txtmgs SEPARATED BY space.
        clear l_ucomm.
        clear sy-ucomm.
        MESSAGE txtmgs TYPE 'E' .
        elseif l_ucomm = 'IMKL'. (OK CODE when user press List button)
             CONCATENATE 'FOR ITEM NO'       diad_resbd-posnr
                        ', COMPONENT'                   diad_resbd-matnr
                        'AND PLANNER GROUP'      diad_caufvd-ingpr
             'THERE IS NO STORAGE LOCATION'  diad_resbd-lgort
    INTO txtmgs SEPARATED BY space.
        clear l_ucomm.
        clear sy-ucomm.
        MESSAGE txtmgs TYPE 'W' .
        endif.
        endif.
        ELSE.
        message 'Please enter the Quantity' type 'W'.
        clear l_ucomm.
        clear sy-ucomm.
        endif.
    Thanks and Regards,
    Rachit Khanna

    Dear Rajesh Kumar Raju
    Go to IMG-->Logistics Execution >Shipping> Picking -->Determine Picking Location -->Define Rules for Picking Location Determination.  There you have to assign the MALA rule to your delivery type
    Also maintain in OMJ8 and in material master under MRP2 view the default storage location in the field "Prod. stor. location"
    thanks
    G. Lakshmipathi

  • Report for Storage location wise Stock with value..?

    Hi guru's
    Can anybody explain me what is T.code i want to use to get a report for STORAGE LOCATION STOCK  with VALUE..?
    Urgent reply me  ..
    Thanks
    sap-mm

    Sorry Mr chetan,
    I want to see only the stock available in my company with Value and storage location wise..
    Please try to get report for this
    Thanks
    sap-mm

  • System asking for storage location in case of Asset GR,

    dear all,
    In our case  system is asking for Storage Location in case of Asset GR, though PO was account assigned.
    I checked for the screen setting, but not getting any clue where to find that entry to make depressed.
    Pls guide,
    Regards.

    Hi,
    Are u using material code for assets or its a text based purchase, if material code is there (although non valuated / qty managed) it will still require sloc as system needs to store the qty in stock
    Reg
    dheeraj

  • Use of Vendor and Customer in 'Define Shipping Data for Storage Location"

    Under the stock transfer order configuration, there is a IMG step <b>"Define Shipping Data for Storage Location".</b>
    In this at storage location level, we can assign, sales org/distribution channel, division and VENDOR and CUSTOMER to storage location.
    The customer number is used a sold-to-party in outbound deliveries.
    <b>But I am not able to figure out what's the use of VENDOR number we are specifying in this step.</b>
    If I am assiging the VENDOR Number here to every storage location, then when I am creating cross-company code Stock transport order, which vendor code I will select the one assigned to PLANT or one Assigned to Storage location.
    <b>Also I need to know what vendor account group I will use for creating this storage location vendor.</b>  I have more than one storage locations) under one plant. Soif I used account group as "0007" plant, SAP doesn't allow me to assigne one plant code to 2 vendors and in vendor master on 'additional purchasing data' screen I am not seeing storage location field, it has only 'PLANT' field.
    <b>So I need to know-
    1. Which account group to use for creating storage location vendor
    2. What's the ultimaye use of this vendor code
    3. What vendor # I will use while creating cross-company PO (one for plant or one for storage location.</b>
    Thanks

    Hi,
    Define Shipping Data
    Here in this step you maintain the customer number of the receiving plant. This customer number is used in SD shipping processing to identify the goods recipient (ship-to party) if stock transfer to be carried out with an SD delivery
    A goods receipt can be planned in the receiving plant.
    You can enter a vendor (transport vendor) in the stock transport order
    In IMG step "Define Shipping Data for Storage Location".
    You can assign sales org/distribution channel, division and VENDOR and CUSTOMER to storage location through Plant only.Means this Vendor is created for entering in the STO .This vendor is created for the the Plant (Supplying Plant)so as u can create STO.
    Rewards If usful
    Regards
    Sanjay L

  • HU Configuration for Storage Location

    Hi everyone.
    In the following point of config, there is something I do not understand.
    I hope somebody can explain it to me.
    HU Requirement for Storage Locations and Default Values for Deliveries
    Are the Vendor and Customer needed in this table?
    If they are, what purpose do they serve? What are they needed for?
    And again, if they are, do they represent the Plant? or what?
    Should they be created with special characteristics?
    I know a lot of questions, But I do not understand.....
    Thanks,
    Alain

    Hello Alain,
    When you are making the storage location is HU managed, and when you try to execute any IM transactions like stock transfer, transfer posting, system doesn't directly post a material document unlike in regular non HU managed locations.
    For example if you try to execute MB1B-311 from HU managed location to non HU location, system tries to create an outbound delivery document. And to create this outbound delivery document you need a customer and this is the place where system gets that customer information. Same is the case for vendor in inbound delivery.
    And it doesn't require to create deliveries all the time if you want to execute these inventory transactions. VLMOVE transaction can be used to posting material document without deliveries.. But not all business scenarios will use VLMOVE as it has its own limitations.
    Regards
    Gopal

  • Negative stock  for storage location M7 021

    Hello
    I use negative stock for some materials
    When I want to post document in MIGO - 551 scrapping, I have error message M7 021: Deficit of BA Unrestricted-use 1.100 EA:   24000641 XXXX 9999 YYYYYYY
    This is ERROR. When I change storage location from 9999 to 0002 message have status WARNING.
    I set - allowed negative stock in material master data MM02 and for plant in WB02
    Where should I set "allowed negative stock" for storage location, because I need warning for location 0002?
    Could You help me?
    Thank You in advance
    Arek

    Go to SPRO>MM>IM>Goods Issue/Transfer posting>Allow negitive stock allowed for plant and then chose the plant and then go for the storage location --> mark the same.
    If use ful award points

  • Table name or report to download materials for storage location

    Hi ,
    Please let me know table name or report or tcode to download material for storage location . I know MARD only. Apart from that table any other please let me knw
    Thanks in advance
    Smitha

    Hello,
    For Material , Plant and storage location report, in SAP Std reports are available.
    1)MC.6
    2)MC.9
    3)MB5b
    4)MB52
    or else get directly from table MARD through SE16 tcode.
    Regards
    Mahesh Naik

  • Data for storage locations

    hello
    I have a list of storage locations which I retrieved from Table T001L.
    I need to find the administrative information for these locations, such as address, telephone, etc etc.
    where can I find it? is there a table that contains this info?
    thanks
    Alisa

    Anything is stored in tables.
    the data you enter at the address tab are stored in tables starting with ADR
    e.g. ADRC for the adress
    ADR2 for telefone
    You first have to get the adress number from table TWLAD

  • Using BAPI_MATERIAL_AVAILABILITY for storage-location-level

    Hello experts,
    To determine the ATP quantity Iu2019m using the function module BAPI_MATERIAL_AVAILABILITY. I need to get the ATP quantity on storage-location-level; for this the following parameters are set:
    - PLANT
    - MATERIAL
    - UNIT
    - CHECK_RULE
    - STGE_LOC
    The result in table WMDVEX is for different storages locations the same, but in transaction CO09 I have different quantities for the storage locations.
    How can I determine the ATP quantity on storage-location-level?
    Thank you for your hint.
    Regards,
    Kurt.

    Hallo Brad Bohn,
    thank you for your suggestion.
    Iu2019m using an own rule (as copy of rule A), the own rule donu2019t use purchase orders.
    In CO09 I have the following ATP Quanties:
    09.09.2009     BStand          1,775     0     259
    09.09.2009     LgBest     0001     785     0     459
    09.09.2009     LgBest     0002     989     0     452
    09.09.2009     LgBest     0003     22     0     20
    The function module provides only 259 for each storage location.
    There is another function module AVAILABILITY_CHECK. Can this function module also be used to determine ATP quantity?
    Thank you & best regards,
    Kurt.

  • Problem in Address update for storage location via LSMW

    I am trying to update the address of storage location thru LSMW,
    Normally when i run OX09 i get the "dialogue structure' in LHS panel but when I do the recording of OX09 in LSMW, I am not getting the "Dialogue structure" LHS panel & hence I can't go to the 'Addressees for storage location'
    How to get the ""Dialogue structure" in LHS while recording in LSMW so that I can update the address also.
    Currently my recording only takes me to the create storage location & no LHS 'dialogue structure'  for 'Addressees for storage location'
    Please give the suggestions as I its on urgent for me to update 1000 storage location.

    Dearrrrrrr Prasoooon,
    U got it Right Again!!!!!
    Thank you so much.
    I resolved with above Note & now i can happily go on leave from tomorrow.
    Salute to you!!!!!!!!

  • Table for Storage location name..

    Hi frnds,
    I have a storage location number.. Now how do i find the name or Description for that?
    How to find the table? ,, If anybody knows the table name plz let me know..
    Thank you.
    Sree.

    Hi,
       CHeck Table MARD for storage Location
    Regards,
    Prashant

  • Classification System for Storage location

    Hello,
    I would like to know if you can apply the classification system (as we know it well from the material master), to classify the storage location configuration. I need this for a client who wants to analyze his information system with the possibility to drilldown the characterics of his storage locations. But to do this, he first would have to apply the classification system to these storage locations, but I can not figure out if it is possible, and where to customize it.
    Thank you in advance for your help,
    Dominik Ley
    DTI Consultores
    Chile

    yk,
    perhaps it is even some kind of weird, but for 2 reasons I dared to make the question:
    - Classification system is a cross-application component (Material Management, Project System, etc.), so why not for something like storage location.
    - For Plants you DO HAVE this classification. Go to CL02 and have a look on matchcode of 'Class type' field. So, my idea was to check if there was something similar for storage location.
    If you do have any other idea, or anyone else, I appreciate a lot your help.
    Regards,
    Dominik Ley

  • Table for storage location addresses

    Hi
    I am trying to find the table where addresses for storage locations are found. I have found the storage locations in T001L and the addresses in ADRC, but cannot find the link between these tables.
    In which table can I find the link between storage locations and addresses?
    Any help is greatly appreciated.
    Regards

    Hi,
    check TWLAD table.
    Regards,
    Chandra

  • STO for storage location to storage location with delivery charges

    Dear Users,
    Please advice the configuration & pre-requisites for storage to storage location STO with delivery charges within a plant.
    Thanks & Regards,
    Shyam

    Moderator message:
    Please put some efforts into a search
    Storage location to storage location stock transfers have been many times discussed as well as delivery charges in UB stock transfer order.
    Do not just post your requirements and expect others to do your job.
    If you dont know how to search, then please see these blogs:
    A good way to search the forum is with google. See this blog with details for a good search
    Getting the Most out of Google: Optimizing Your Search Queries
    This blog describes how to use the SCN search:
    How to use SCN search
    The discussions are not a replacement for proper training
    Thread locked

Maybe you are looking for