Approval if Unit cost is lesser or equal to last purchase price

Dear experts,
Is it possible to give query based approval if the unit cost in the PO is less or equal to the last purchase price of the particular item. If there are more than one item then it should validate for all items. Even if there is deviation in any one of the item it should go for the approval.
Please guide me in doing this.
thanks and regards,
Yeshwanth Prakash

Hi Yeshwant.....
This is Not at all possible even through query. You can have some work around for that but you can not get direct solution for this....
Approval for Row level data is always not possible.....
Please check this thread....
Re: Query base approval for PO Unit Price
Regards,
Rahul

Similar Messages

Costing of product with last purchase price

Hi
how would be possible to get the Costing through CO with the last purchase price of the Product .
suppose one product is having nos of SFG & RM.
Rgds
Pankaj Agarwal

hi
Is it that the the system has to pick up the last purchase price cost for standard costing run or while executing the production order, if it is while production order update material price as planned price in material master using Z program and use planned price as strategy for valuation variant in actual costing variant. But this is little bit cumbersome every time you have to run the z program for every purchase order for that raw material and if the prices are highly volatile input price variance will be very high
krishna

Unit Cost of non stock material - Hubwoo Catalogue

Hi Team,
There is one requirement to transfer the the cost of matrial from SAP PM to ArcFM. Here the materials are assigned to the operations in the PM order. Here we want to transfer the service cost and material cost of the particular operation to the ArcFM ( ie an external design tool) to estmate the total cost involved for the particular operation.
Here the unit cost of the stock material can be get from the material master. But for nonstock material, a hubwoo catalogue is maitained. How do we get the unit cost for the this material?
There is an interfece we have to develop to transfer the service cost and material cost from the SAP to ArcFM. Hence we have to get the unit cost of the non stock material here.
Thanks in advance.
Regards,
Shyjith

Hi,
Yes, you are right but in material master price is not updating, many times I have been assigned the same material as a non stock and at every time I have maintained the planned price on order level but it is still maintained as "0" value in material master,
what is the standard process?
what settings need to be made to get automatically planned price or last purchased price for a non stock material?

P4310 unit cost issue

Dear Sir/madam
we are facing the below issue
When entering a Purchase Requisition or Purchase Order detail line, on the exit of the line after entering Item / Qty, the unit cost is defaulted to 3 for any Item.
how can we make the unit cost not to be default to 3 ?

Price/Rate 3 is also coming for Purchase Requisition ?
Please review following link for Item Price for IR.
(1) Review Step 6 Item Price Information.
Raghunath Kashyap Oracle Shopping Mall : Internal Requisition Setup in Oracle Apps
EXPLORING ERP: What Are The Steps Required To Setup An Internal Requisition In Purchasing?

CK11n Costing Run does not pull purchasing price from info record.

Hi,
I have material which is a semi finished product (Material type: SEMI) and is purchased from a fixed vendor (specified in the source list).
The costing run does not pick up the purchasing price from the purchasing info record but
instead incorrectly picks up the standard price from the material master (Costing 2 view).
Can you please help me solve this issue?
Thanks,
Ketan

Execute OPL1
or
SPRo>>IMG>>Controlling>>Product Cost Controlling>>Cost Object Controlling>>Product Cost by Order>>manufacturing Order>>Check Costing Variants for Manufacturing Orders (PP)
Select the costing variant in the table from "Change Costing Variant: Overview" Overview Screen
Click Detail Button
Click Valuation Variant Button in the Control Tab
Change View Valaution Variant Detail Screen Appears
In Material Valuation Tab Set Price from Purchase Inforecord as Priority 1 if you want to use Price from Purchase Inforecord for semi-finished product during CK11N
You can list down Priority 2 to 5 depending on your requirement
This would solve your problem
Edited by: Paul Pandian on Mar 17, 2009 3:01 AM

Zero unit price at invent. trans. gd receipt and last purch. price

Hi Expert,
I am wondering why B1(2007) does not update the last purchase price when the good receipt has been done at Inventory > Inventory transaction > Good receipts if the unit price is ZERO?
However, if the non-zero unit price is entered and transaction post, the last purchase price will be updated accordingly.
Thanks

Hi!
That may be the system behaviour !

F-47 request should be approved by higher authority for lesser amt than ask

F-47 request should be approved by higher authority for lesser amt than asked for only then down payment should be made.
they want a list of down payment request which can be edited approved or disapproved by higher authorities The payment clerk should make payment only for the amt that is approved.
can it be done in sap without credit management
warm regards
Manjunath

Ah, I've just re-read my BT bill and it does indeed say BT Infinity Option 2 !
I took that to mean BT Infinity 2, but maybe it means BT Infinity 1 Option 2 (which gives unlimited usage).
Viewing my account online, it also says "Up to 76Mb download speed" and "Up to 19Mb upload speed", so I think I'm on Infinity 2 but with my IP profile still stuck at the same 38.72 that I was originally given.
Anyway, to re-phrase my dilemma......
Since I'm consistently hitting the IP Profile ceiling, I feel that my line MIGHT be capable of running faster if it were allowed.
What I don't want to do is apply for the no-cost "up to 76" option, and the discover that the line is not so stable.
When I originally signed up, I was told to expect about 26 down speed, so BT obviously thought that my line would not be good enough for 38 even.
I suppose I'm really asking if anyone has gone from 38 to 76, and regretted it because they then got a less stable line, variable speeds, or even consistently lower speeds (or maybe for any ther reasons).
Or, maybe I'm supposed to be getting a faster speed, but just have a "stuck Ip Profile" ?

Portege R100 - Random Blue Screen of Death (IRQL not less or equal)

Hi,
I've been getting random "Blue Screen of Death" screens in the last few weeks. The error is "IRQL not less or equal" and it's performing a memory dump every time. If I get the error and try restarting the laptop after, I usually get the same "Blue Screen of Death" screen when booting.
I didn't install any new hardware lately. Last upgrade was about a year ago; upgraded the memory. I've tried replacing the RAM with a spare one I had and I was still getting the same error.
I didn't install any new software in the last weeks that would coincide with this error.
I'm monitoring the CPU temperature and I doesn't go higher than 48 deg Celcius.
I'm not an expert but I would assume this is purely an hardware problem ? Since I rarely hear the CPU fan, I thought it could be the CPU overheating.
But even after making the CPU fan run at 100% using a freeware called "Speed Fan" I was still getting the same random "Blue Screen of Death" screen.
I would really appreciate any feedback and help. I really like my R100 and would like to fix it.
Mark.

Hello, I have a Portege R500 and I am also too having this error message. I was getting a blue screen when loading the pc advising of a memory dump issues.I ahve replaced the ram inside the laptop and this has failed to resolve the issue. I am now having the error, IRQL not less or Equal everytime. I have run a memtest86 scan and this did show up possible memory issues. SO I have replaced the memory chip again. Still showing up as memory issues.
You have mentioned this could be a cpu or memory controller. If this is the memory controller can this be replaced? or would a motherboard replacement be the best option?
I have not tried a re install of windows 7 32 bit as yet, As the memtest86 program has identified possible memory issues. Please can some one advise if replacing the cpu and possible memory controller would resolve this. Memtest log available if wanted.
Regards
John Powell

Unit Cost is not Populating in Sales Order Line Level for OPM Enabled Org

Dear All,
This is to inform you that Unit Cost is not populating in Sales Order Lines. Ideally it should pick from OPM financials, but whenever i am running Cost Update it is throwing error. We need to pull out Unit Cost for Sales Analysis Report. Please suggest on the same ASAP. What are the steps needs be followed to populate the Unit Cost. Please suggest.
Thanks & Regards,
Patrick

Hi
I think it will pick from PRICE list. Why don't to you try by keeping this item in the mentioned Price list.
Regards
Raj

Change unit cost AP Invoice line based from a Goods Receipt PO base entry

Hi,
Im using SAP B1 2007A PL 46 with B1DE 2.0
SCENARIO:
(1) I have a goods receipt PO that has a line for an item with a quantity but 0 unit cost.
(2) At a later stage, via DI, I create a AP Invoice and set the line BaseType, BaseEntry and BaseLine to point to the goods receipt from step 1.
REQUIREMENT:
When creating the AP INV, I would like to change the unit cost for the line to something other than 0. I find however, that because I have based the AP INV Line a base document, I cannot override the line price for the line before calling the APINV.Add() method. After calling the APINV.Add() method, the APINV Line still has the price of 0 even though I set it, for example, to 100. (see example below)
                    docAPInv.Lines.BaseType = (int)BoAPARDocumentTypes.bodt_PurchaseDeliveryNote;
                    docAPInv.Lines.BaseEntry = GoodsReceiptPODocEntry;
                    docAPInv.Lines.BaseLine = 0;
                    docAPInv.Lines.Price = 100; //NEW PRICE            SEEMS TO HAVE NO EFFECT
                int res = docAPInv.Add();
                if (res < 0)
                    Success = false;
                    ErrorReason = B1Connections.diCompany.GetLastErrorDescription();
                    break;

Hello,
If your system is installed as 2007 (no upgrade from 2004/2005)
-> use the UnitPrice instead of Price field.
If you have upgraded from 2005/2005 versions,
->You can choose between the UnitPrice and Price fields up to the Customizing settings.
See SAP Note 1334050
Regards,
J.

How to get unit cost for finished goods in prod order

HI all,
IN a production order of type PP04, there is cost analysis you can get from CO03. This shows the cost for finished goods and BOM components. Would anyone know how the cost for finished goods are calculated ? The issue i have is that the unit cost of the finished goods is not correct. It is higher than what it should be. I looked at the moving avg price at material master but the cost used in calculation is different than in material master. Can anyone shed light how finished goods are calculated and why it is picking up a higher unit cost ? Where is the higher cost coming from for finished goods material as shown in CO03 ? The BOM materials are picking unit cost correctly. Would this have anything to do with cost settlement ?
thank you.
joyce

Hi,
Finished goods price will depend on BOM componenet price, activity price and overhead price. Check whether this prices are picking correctly or not.
Regards,
Sreekanth

Less or less than equal in the for loop condition

Hi,
What do you prefer, what is more common, which one is more easily readable, less or less than equal in the for loop condition?
for (int i = 0; i < arr.lenght; i++){..}
//or
for (int i = 0; i <= arr.lenght - 1 ; i++){..}I know this is basic programming and nothing to do with Java, so if this forum is not for this purpose, could you please suggest a general programming forum?
I would really appreciate it as I have many general questions :)
Thanks in advance,
lemonboston

lemonboston wrote:
Hi,
What do you preferPersonal preference, which is useless to you
, what is more common,Based on years of reading open source code, the first
which one is more easily readable, less or less than equal in the for loop condition?Personal opinion, which is useless to you
I would really appreciate it as I have many general questions :)If you don't want to think about it yourself (which you should be doing in stead of asking general questions), simply attack it lazily. Both examples achieve exactly the same, but the first one is less to type and to read.

Java.sql.SQLException: Invalid column count. Cannot be less or equal to zer

Hi,
update method working but java.sql.SQLException: Invalid column count. Cannot be less or equal to zero is thorwn...
value's are updating...how can i handle this exception...pls anybody help me
related java file(IDE) generated file
public void setColumnCount(int columnCount) throws SQLException {
if (columnCount <= 0) {
throw new SQLException("Invalid column count. Cannot be less " +
"or equal to zero");
}

The idea behind drag'n'drop visual editors and code-generators is nice. But they are not intented to be used by developers who don't understand what they do.
With other words, keep away from those visual editors and code generators as long as you're unexperienced with Java. Write code at your own. You will learn and grow gratefully.

Unit costing for materials assigned to activity - for material cost plannin

The requirement is that material cost to the company will vary depending upon the project/customer. Eg.: Material cost = basic material cost + a % for P&F + 2 % for Clearance + a % for excise + 2 % for insurance + a % for Customs
It can be a % or a lump-sum value. It can be all the components listed or part of them. This will be project specific.
Hence the following preference for material cost planning is required:
1. Material cost based on quotation or Purchase order - If quote/PO is not available, then
2.Material cost based on unit costing done for the material in the project - If this is not available, then
3. material cost from material master depending on price indicator i.e. Std cost or Moving average price
We are working with valuated project stock.
SAP Help says"
"Prices are calculated in one of the following ways:
u2022     Using the strategy in the valuation variant
u2022     Manually, using the invoicing plan
u2022     Using unit costing"
But how to get the cost as per the priority required when these three options are there is not clear.
I have tried to work with valuation variant in the costing variant assigned to Network. No valuation strategy explicitly refers to unit costing of material.
During various testings, at times, unit costing of material gets updated as planned cost; at times not. What triggers in also not clear.
Pl. clarify
Thanks and regards
A.Saravanan

Hi All
I have psoted to service market place and got the reply; we have implemented also.
there were 2 suggestiosn:
1. Valuation price with user exit - (EXIT_SAPLCK21_002) - This user exit has to be implemented; we have implemented - it is working. But this is taking effect when overhead calculation is done - this we rae managing that way now
2. Alternatively you can try to use BAdI VALUATION_CK.: This BADI is not editable by us now; SAP has not released for our editing!
The problem is solved although
There is one more clarification required:
As SAP Help documentation: -> Unit costing is used instead of strategy sequence, but not in between steps of strategy.
How to get this done ? right now we are using the strategy - inbetween steps of strategy with user exit
Thanks and regards
A.Saravanan

Detailed Report on Unit Cost Planning.

Hi friends,
I am doing Unit Costing in my Project in Version 1.
Is there any standard report where I can get a display of all the Materials & services or (say) any Misc cost obtained thru Arithmatic Operation in the Unit Costing?
That is to say the detailed report of whatever is done in the Unit Cost Planning.
I am only getting the report of Planned Cost on Overall Basis.
Secondly, in Unit Costing if I do any arithmatic Operation on the total value or on a particular row, then the value obtained from the arithmatic operation is not getting displayed in the cost Planning report.
Thanks in advance.
Regards,
Abhra Bose.

Hi Abhra,
UC Method is only to plan the project cost estimates. There is no such standard report to get the detailed plan report in terms of material, resources and Miscellaneous (tru Arithmatic calculations) except cost element report ( that to interms of cost only).
As you said, you can only get the Overall Planned total in Hierarchical report (i.e like S_ALR_87013532 - Plan/Actual/Variance ) including arithmatic calculations. but If you check in Cost element report ( i.e like S_ALR_87013542 - Actual/Commitment/Total/Plan in CO Area Currency ) you can get all planned cost that is planned against specific cost element, since it is a cost elements based report only.) If you want the planned cost tru arithmatic calculations also, you need to specify a cost element against that line item either in BPO or at WBS level.
Hope this will help you some extent.
Appreciated for giving points.
Regards,
Hari Krishna.K

Approval if Unit cost is lesser or equal to last purchase price

Similar Messages

Maybe you are looking for