Approval in two days -- question about direct link to store

My first iBook was approved in two days, but I have what is probably a simple question but I can not find the answer anywhere.
I want to get a url to direct people to the book, how do I get this?

I knew it would be simple, but very valuable info. Thanks KT.
Here is is
<a href="http://itunes.apple.com/us/book/beyond-ellis-d/id531625572?mt=11&uo=4" target="itunes_store">Beyond Ellis D - Donnell Alexander</a>

Similar Messages

Question About Broken Link

How do I determine the cause of an item being placed in the broken link list after doing a site check?

Rick and Ben:
You have been very patient with me
Guess at 81 I am starting to lose it - the code and screen shots I put in my email apparently did not make the trip
I will study how to use the forum tools and get back to you if I grasp the procedures required
Thanks again
Tom
Date: Thu, 19 Dec 2013 07:49:50 -0800
From: [email protected]
To: [email protected]
Subject: Question About Broken Link
    Re: Question About Broken Link
    created by Rick Gerard in Dreamweaver support forum - View the full discussion
You are trying to post code from an e-mail, that won't work. You ahve to be on the forum and use the tools there to post code.
Copy and post the suspect code and we can help. Otherwise we are completely guessing.
From what Ben says you have a typo or some missing files on your server.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5944607#5944607
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5944607#5944607
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5944607#5944607. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

This is a two part question about the creative 16gb Zen?

8This is a two part question about the creative 6gb Zen? First of all, my battery life dropped very suddenly. One charge I was getting the full 30 hour battery life and the next it dropped to under ten. I tried using their tips on how to extend the battery life and I am still getting less than 0 hours of battery life. Why would it dropped more than half the amount between charges? I tried recharging it after it ran out and still the same thing. Any help?
Second, (I am adding this question because it might relate to the first in some way) my mp3 player has been behaving strangely lately. For example, some artists sometimes have letters removed or all but the first end up being removed. But, if you reset the player, the artists go back to the full name. Also, my player has been taking a little longer than usual to turn on. It takes about 30 seconds to turn on instead of the 5-0 that I'm used to. Does anyone know why this might be happening?
My Zen is only 4 months old, and I would be very upset it it's breaking already. Please, if you have any suggestions on how I can fix what's happening, post them. (Even if they?probably won't work, they're worth a try.)

< This is an unusual one; never heard of it before. All I can suggest is cleaning up and perhaps reflashing the firmware. If it still is doing this, then get the thing exchanged pronto.
My guess is that the problems are indeed closely related.

Two weird questions about BP maintenance......SOS!!!

Two weird questions about BP maintenance......SOS!!!
The procedure is like this:
These informtion will be import to SAP:
BP information
Address Information of this bp.
Communication information of this BP
1. check if the bp exist, if yes, update the BP.Then go to 3.if no go to 2
2. Create a bp with the Address information and communication information
3. Check if the Address information has been existed,if yes go to 4.else go to 5
4.Update the address information with the communication information.
5.Create a new address for this BP.
And the problem I got is like this:
1. After I changed the BP information, such as the surname,lastname etc.Use this BAPI
"BAPI_BUPA_CENTRAL_CHANGE",I commited it.Then I call the BAPI "BAPI_BUPA_ADDRESS_CHANGE" to change the Address of this BP,however
When I call the BAPI_BUPA_ADDRESS_CHANGE,it always told me the BP is locked by myself.............
I am sure I do not open the BP in the other window.And I commit it after I call the BP Change BAPI.
2. When I change the communication information ,it always told me BAPIADTEL you want to update does not exist in this system.....I am sure it does.
Who can help me??
Thanks very much

Hi,
1) Problem with the lock. To commit the changes after the BAPI_BUPA_CENTRAL_CHANGE API, instead of using commit work to commit, Use BAPI_TRANSACTION_COMMIT. This should solve the problem. This wil help in clearng the buffers of BP.
2) in the BUPA_ADDRESS_CHANGE, for telephone there are two parameters to be filled IT_ADTEL, IT_ADTEL_X
IT_ADTEL : Should be filled with the telephone details etc (Consnumber should not be filled for inserts. This should be filled only for updates).
Corresponding IT_ADTEL_X structure has to be filled with update flag as 'I', 'U' or 'D' based on the task.
Hope this helps. Let me know if some more info is needed.
Regards,
Sudheer.

Two little questions about ROWID

Hello friends at www.oracle.com ,
as we know, each time we insert a new line, Oracle creates an unique ROWID for that line. I have 2 questions about ROWID:
1. Is there a way for me to obtain ROWID value at the moment of insertion, other than doing a SELECT rowid FROM (table) WHERE (primary key inserted values) to obtain the ROWID that was generated for that line?
2. If, for any reason, we have a so big database that all ROWID possible combinations are over, how would Oracle handle such situation? I believe it's something quite rare to happen but, anyway, there's the possibility as Murphy Laws have taught us :)
Thanks for all answers, and best regards,
Franklin Gongalves Jr.

1. The (quite new) DML RETURNING clause allwos this:
Eg. insert into bonus values ('Bill', 'work',100, 4) returning rowid into :x
This works in 8.1.7 and 9.0.1 I don't know about earlier.
2. A rowid includes the physical address of the data. Before you used all the rowid's, the database wouldn't be able to hold any more data. The limit is big, but not infinite. If you hit it, try going to distributed databases using database links.

Question about Tax at Apple Store Online

Hello, sorry if this thread is in the wrong place, please direct me to the right part of the forum, since I do not know where this topic should go.
I'm a prospective switcher planning to get a 20' intel iMac very soon; I just have a small question about perchasing from Canadian online Apple store, since I can save most from my student discount:
When I view the price in the checkout process, why is it that the estimated tax is always $0.00, even if I use the regular store intead fo the educational one? I had correct infomation about my shipping location (Toronto, Ontario), will the regular tax be applied (which is 15% here) or is there something wrong there?
Thanks

I checked my orders from the Apple Store (Canada) and the documentation prior to shipment says "Please note that your order subtotal does not include applicable sales tax or rebates. Sales tax, if applicable, will be added when your order is processed."
After they ship, they email an invoice that includes the tax and shipping, if applicable.
Hope this helps.
(And yes, you'll be charged the tax.)

A question about direct connect and getting emails on BB curve 8350i

can someone please help me....I'm new to BB and I just purchased a curve 8350i. First question when I direct connect to someone after i'm done with the call, i always get a message about the call i just did. How do I stop from getting those annoying messages. Second question I have an email set up in my BB. Now everytime I get a email I get a copy in my message icon and my email icon, how do I stop from getting a copy of my email messages. I would appreciate if anyone can anwer my questions...Thank You

1. no idea
2. you can find answers for this all over the forums, it gets asked atleast once a day.
the messages icon is a general incoming icon, all incoming messages go there, only item you can seperate from it are sms & mms texts.
if you use txting, you can seperate sms from the msgs, then hide msgs. use email and sms icons
when you delete your email from email icon it will automatically delete from msgs as well. its not actually 2 emails in 2 locations, its 2 locations pointing to the same email

Two separate questions about the new s3 update

Okay, so I just recently updated my s3 and so far I love everything about it, very nice job. Just two things bother me about it (not sure if the second one has to do with the update or not)
Firstly, when you receive a text message it pops up on your lock screen with about the first sentence of the message. Now that's a big problem for me, I enjoy my privacy, so if I'm texting someone, get up and leave me phone wherever I am at the time, someone could pick up my phone and instantly see who I'm talking to and what about without any type of security (I have the pin lock). If there is a way to disable it I cannot find it anywhere, maybe I'm not looking hard enough, any help would be appreciated.
Secondly, when sent a picture message instead of the message itself from the person sending it I get a message from "Me" or my own phone number saying "You've got a new PIX or FLIX message! To see it, visit *insert the vzw site here*. When going to the site it asks me to sign up and sync my phone to the cloud, which I do not want at all. Is this something with my service or the new update? It's quite infuriating to be honest. If either of these is true, is there a way to disable this feature and continue receiving pictures/video messages "normally"? PS: Picture/Video messaging worked all normal before I updated.
Thank you so much for any insight or help you can provide.

jakeskee wrote:
Okay, so I just recently updated my s3 and so far I love everything about it, very nice job. Just two things bother me about it (not sure if the second one has to do with the update or not)
Firstly, when you receive a text message it pops up on your lock screen with about the first sentence of the message. Now that's a big problem for me, I enjoy my privacy, so if I'm texting someone, get up and leave me phone wherever I am at the time, someone could pick up my phone and instantly see who I'm talking to and what about without any type of security (I have the pin lock). If there is a way to disable it I cannot find it anywhere, maybe I'm not looking hard enough, any help would be appreciated.
Thank you so much for any insight or help you can provide.
If you are using the stock Text messaging App. Open the app (while on the screen that shows all your people you have text, (not an individual person) click on your menu icon, the go to Settings> scroll down to >Notification settings>Notifications The box should be unchecked, or if it is checked there is a "Preview message" option that you can uncheck. That will take it off of the lock screen. Hth.
***Sorry, did not see the link that Tikibar posted ref the first question. If you leave the "Notifications" box checked, you can customize the rest of your notifications...and just uncheck the "Preview message" box.

Questions about updating linked .ai files

I have two questions regarding linked images.
(1) Sometimes when I make changes to an .ai file, the InDesign document will automatically update the image as soon as I save the changes in Illustrator. In other words, I do not need to update the link in the ID links panel. Other times, however, the link will not update, and I have to click the yellow triangle next to the image in the links panel to see the changes. Is there a reason why this happens, and is there an easier way to update images than the links panel. In Quark, I could just double-click on the image and a dialog box would ask if I wanted to update the image. This isn't a big deal to me, but I thought I'd ask.
(2) Whenever I make a change to an .ai file, the linked image in InDesign always re-scales, and I can't figure out why it does so or how to make it stop doing this. For example, I placed a bar chart made in Illustrator in a frame and adjusted its +x and +y values. It came in at 100% scale and I did not change that. Then, I had to make a change to a text label on the chart, which made the graph slightly smaller. When I updated the link in InDesign, it was re-scaled to 118.12%. I had to go into the +x field in the control bar and type in 100% to get it back to the scale it was before. Is there a default setting I need to uncheck to turn this feature off? If not, is there by chance a simple keystroke that will let me re-scale the image quickly?
Thanks in advance for your help!

1. It sounds like you sometimes select the art or thename of the link and choose "edit original" and sometimes you just open the art and make changes. If you tell ID to edit original it updates at the save.
2. There are two options, depending on version, for the relink behavior and scaling. In CS5 (and CS4 if I remember correctly), you have a choice between them inthe prefs, in earlier versions it's one or the other, depending onthe version. One option is to preserve the dimensions, which is wha'ts happening to you. The other is to preserve the scale. Exactly how preserving dimensions behaves depends, too on the cropping options you used when placing the .ai file. If you cropped to aret or bounding box, for example, changing the size of the art or removing a stray point affects the art or bounding box, but cropping to media would not change.

Question about Illustrator links in Indesign

Hello all,
I recently had a job from a customer that contained many links of company logos in which the fonts weren't outlined.
As I understand it, fonts from IL links are not collected when using the package function in Indesign....is this correct?
I didn't have most of the fonts for the Illustrator links, so they were substituted when I open them in Illustrator, however when I open the Indesign document and link the Illustrator links, they appear correctly.
When I open the links panel in Indesign, it shows the format of these .ai files as adobe PDF not .ai(or .eps as several of the links are).
What is happening here?
Is it safe to ignore all the font warnings and just link them in indesign?
Thanks, Bill

imarcr2 wrote:
I am going to do some testing on some trial files on my end.
Part of the problem stems from my client not using Suitcase or equivalent for font management. She has all the fonts needed in font book.
I don’t see how that is relevant. Font Book can install and activate/deactivate fonts as well as any other program. It’s just not built with an interface that is suitable for large libraries or frequent installation/activation/deactivation.
This job has about 15 company logos in it, most of which contain several fonts. When the client packages the job, she probably isn't even aware that the fonts from the illustrator files are not being collected.
Most logos have no fonts, and I suggest you do the same with yours. Convert the text in the logo to outlines and use that. Keep a master file with the text for further editing. I have worked at large design agencies where we keep a library of hundreds of fonts for clients and event sponsors. All type is outlined.
For this job, I was searching for the logos online from the individual company websites to assure the logos appeared correct
That is a good idea in theory, but finding the companys’ official approved logo files online is usually a wild goose chase. You can also try to contact someone at the company to see it they will provide you with a logo file, but that works about as often as Bullwinkle pulling a rabbit out of a hat.
My trick: search the website for PDF files. For abcd.com, I would google +site:abdc.com +filetype:pdf and look for vector logos in brochures, product sheets, or documentation. For larger companies, look for Investor Relations and download annual reports or quarterly reports. You may get the logo, possibly in black only or RGB instead of CMYK, so the colour might be off. You also won’t get a GSM (graphic standards manual), which explains guidelines for sizing, positioning, background colours, and spacing requirements.

Question about the links that include parameters...

Hello,
I use this:
<a href="inserer_devis.jsp?firstparameter=<%= rs.getString(1)%>&secondparameter=<%= rs.getString(2)%>">to have a link that gives parameters to the other JSP.
My question is:
On the other JSP, when I use request.getParameter("firstparameter"), what is the thing that I get: is it a string, a char, ...??
And how can I convert it to a float or an int?
I have problems with integer.parseint() and float.parsefloat(), it tells me "NumberFormatException: null". The compiler thinks that my parameter is not a good int (or float).
Thank you.
Romain.</a>

Request.getParameter always returns a String (see the javadocs).
To convert a String to an int use Integer.parseInt(StringToParse);
To convert a String to a Float usse Float.parseFloat(StringToParse);
just see the javadocs for more information

Two quick questions about Library after moving beginning on a new computer

Hi there,
I just moved from Windows to Mac, meaning I had to move my iTunes library from the old PC to my new MBA.
Just a couple of quick questions.
1. When I started iTunes on my new Mac, in the preferences I directed the media folder to the folder with all my itunes music/podcasts etc, and then I imported the Library XML file. Is this incorrect? Should I have imported a different file? Should I have used the itl file instead?
If so, should I delete the library and start again? (if this is the case, please suggest the best way of doing this without affecting my media)
- a kind of sub-question to this one: some of the media files arent showing up in the iTunes library, but they are in the media folder on the ext HDD. Is there a way I can find out which ones havent been recognized by iTunes? Whats the best way of getting them in to my library?
2. Pretty much half of my podcasts have not been loaded in the new iTunes. The ones that havent were ones that I subscribed to on my iPhone, whereas the ones that show up in iTunes were ones I downloaded from iTunes. When I connect my iPhone and sync it with iTunes, will those podcasts show up in iTunes? Or is there a risk that they will be deleted from my iPhone?
Cheers,

The .xml is lacking some information such as ratings, date added, and play count. Using the .itl includes this information but cannot be imported using the method you did.
A complete library is everything in the iTunes folder. By using the method you did you left the artwork behind in the artwork folder on the other machine.
Selecting the media folder in preferences does not get iTunes to recognize the media. All it does is tell iTunes to start storing new media in that location.
Using the method I outlined nothing will be missed (with the exception of WMA) because you aren't rebuilding your library, you are using the one that already exists.
You don't have to re-copy everything as long as you get the stuff you missed and re-assemble it all as it was before except not on the Mac.
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391

Question about lost linked files

I have an illustrator PDF with a linked photoshop PDF as the background, but have lost the linked file on my HD. The background image still appears when I open the illustrator PDF in acrobat and photoshop, but not in illustrator because it cannot find the linked document on the HD. Is there a way to extract the background from the illustrator pdf, so I can have a file of just the background that I can then re-place on the illustrador PDF?

When you open the PDF in Photoshop, the dialog should have two tabs. One should be Images. See if the image shows up there. If it does have Photoshop open that image and resave it anywhere you want and then relink it.

Question About SSI Links

Hi --
I have a client who is quite proactive in updating the site
-- on average
once per month. When the changes are fairly extensive I
upload the entire
site to a test directory on their server so they can review
the changes at
their leisure. Here's my problem...
I'm using a number of includes on the site's pages --
secondary nav, list of
services on each page, footer. (Here's an example:
http://www.catenion.com/about/about_catenion.shtml).
When I upload the site
to that test directory the links in the includes don't
reflect the new
location on the server. They continue to point to the pages
for the live
site. How do I get the links in the various includes to
reflect this
change??
Below are the steps I took in loading the site to the test
directory. Can
someone let me know if I've overlooked something?
All links in the includes are relative to the site's root.
In the site's definition dialog...
changed the HTTP Address to reflect the change:
from:
http://www.catenion.com
to:
http://www.catenion.com/catenion_test
Also changed the host directory to point to the directory
"catenion_test".
When I click "OK" the site's cache is recreated. The I upload
the site.
What am I missing?
Thanks,
John

I would use document relative links instead of site-root
relative links
here. I use includes with php and coldfusion all the time,
and when using
document relative links, as long as the relative location of
the files does
not change the includes will work. So if you create a folder
"test" on the
remote server and upload the everything relevant into this
folder
maintaining the relative location of those files, the links
should work
within this folder and the includes picked up will be those
that are within
this folder. The link of course would not have an absolute
path such as
http://www..... Instead it'll be a
relative path <?php
require("navmenu/nav.php")?> rather than <?php
require("
http://www.mysite.com/navmenu/nav.php")?>
There are pros and cons of using document relative links but
thats another
discussion.
Hope this helps.
You cannot lose until you give up !!!
"Tarvardian" <[email protected]> wrote in
message
news:[email protected]...
> Hi --
>
> I have a client who is quite proactive in updating the
site -- on average
> once per month. When the changes are fairly extensive I
upload the entire
> site to a test directory on their server so they can
review the changes at
> their leisure. Here's my problem...
>
> I'm using a number of includes on the site's pages --
secondary nav, list
> of services on each page, footer. (Here's an example:
>
http://www.catenion.com/about/about_catenion.shtml).
When I upload the
> site to that test directory the links in the includes
don't reflect the
> new location on the server. They continue to point to
the pages for the
> live site. How do I get the links in the various
includes to reflect this
> change??
>
> Below are the steps I took in loading the site to the
test directory. Can
> someone let me know if I've overlooked something?
>
> All links in the includes are relative to the site's
root.
> In the site's definition dialog...
> changed the HTTP Address to reflect the change:
> from:
http://www.catenion.com
> to:
http://www.catenion.com/catenion_test
> Also changed the host directory to point to the
directory "catenion_test".
> When I click "OK" the site's cache is recreated. The I
upload the site.
>
> What am I missing?
>
> Thanks,
> John
>
>
>
>
>
>

QT pro question about direct video capture to mov file

I am thinking about buying QT pro because I would like to record video directly from my Sony mini DV camcorder to a QT file. Can you control the destination of the QT file being created to a second HD or flash drive? I don't want to capture video and fragment my macbook pros HD. Second can you control the size of video being captured? I don't need to have full screen video and would like to save HD space on my secondary drive.
Thanks for any help.

Can you control the destination of the QT file being created to a second HD or flash drive?Yes, see the "Preferences > Recording > Save Files to:" option.
I don't want to capture video and fragment my macbook pros HD. Second can you control the size of video being captured?Size is tied to the "Quality:" pop-up options. (Good -- 320 x 240 MPEG-4 video and AAC @ 128 Kbps, Better -- 320 x 240 H.264vide and AAC @ 128 Kbps, and Devie Native -- raw DV audio and video standard.)

Approval in two days -- question about direct link to store

Similar Messages

Maybe you are looking for