Approval notification mail modification

Hello
We are using RSWUWFMLEC program to send approval notification.
But User requested to add SRM Approval Note into Notification mail.
I searched SAP Notes and notification mail content can be changed by BBP_OFFLINE_APP_BADI. (program: RBBP_NOTIFICATION_OFFAPP)
But I don't know what method should be changed and How to I have to implemet it on the BADI.
Could you please let me know implemented program examples on the BADI,BBP_OFFLINE_APP_BADI?
Thanks,
yuri.

Hello Yuri,
Have a look at OSS note below:
1465251 - How to change the contents of an offline approval email.
If approval note cannot be managed with description task modification, you will have to make a copy of RSWUWFMLEC standard report in order to add your modifications.
Regards.
Laurent.

Similar Messages

  • Unwanted leave approval notification mails to Non-Manager

    Hello All,
    I have a situation wherein one of our portal users started getting leave approval notification mails from other employees in that Org Unit. Now the interesting part is he is not a manager and never was. Checked his relationships, substitutes and delegations and every where it is normal and not supposed to receive such mails. Moreover we are not using workflows yet
    Where could we have gone wrong, after so many attempts now my I am gone blank so please do suggest me all tables or customizations where it could went wrong or possibly any silly mistakes that would trigger this kind of problems.

    Thanq, that was very prompt;
    Here are my settings in RPTARQEAIL.
    Send email to requestor with text HR_TIM_ARQ_REQUESTOR with general notification almost for all.
    But should I rather check the settings for mail to approver instead? Coz one of a non manager employee  is getting approver notification mail such as " your employees in your dept are awaiting for your processing..."
    Can you brief me out on why this document selection radio button could have gone wrong in sending mails to requestor regarding approvals.

  • Missing Subject line for the Approval Notification Mail

    Hi,
    We use CUP 5.3 SP7. We have configured the system for role based approval. We found that the approval notification mail being sent without any Subject line. It's configurable to set the admin mail id, but couldn't find one to set the Subject.
    We get the following content in the mail....
    View <http://<host:port>/AE/index.jsp?verifyApproverLogin.do........................>
    Can we set it somewhere from the configuration?
    Regards, Anil

    Hi Alpesh,
    Thx for your reply..But i think you missed my point...Let me try to explain it again...
    When we submit a request, the system triggers a notification mail to the approver(s). And this mail seems to be missing a Subject line... and it's shown to be sent from the System E-mail id we set at the SMTP server config.
    I couldn't find a tab for setting the E-mail format for the first approver  neither at the stage nor in the e-mail reminder configuration.
    Perhaps, setting the next approver will help if i had a secondary approver. But we are using a single stage WF in CUP. Am i missing some config step here?
    Regards,
    Anil

  • Wrong link in notification mail

    Hi,
    The link provided in our approval notification mails are wrong. For example:
    https://xxx.yyy:8007/sap/bc/gui/sap/its/bbpstart/BBP_CTR_DISP/!?client=013&sap-client=013&language=EN&sap-language=EN&~DisconnectOnClose=1&CONTRACT_GUID=45702019323A0102000000000A0C0181&OBJECT_ID=4000000302
    As you can see the "bbpstart" is in excess and should be removed. Actually when we manually remove this part from the URL and retry to connect we are able to see the actual page.
    What might be the reason for this problem?
    Thanks
    PS: The ITS_DEST attribute for our organization is "https://xxx.yyy:8007/sap/bc/gui/sap/its/"

    Hi Emre,
    I have no idea why this error is there, but you can rectify it in the report RSWUWFMLEC SRM 4.0 or RBBP_NOTIFICATION_OFFAPP SRM 5.0.
    change the variant of this report or create a new  variant and then schedule it.
    Try to give the desired URL in DEF_URL1.
    Thanks,
    Smita

  • Approving Purchase Through Notification Mails

    Dear All,
    I setup the notification mailer to send the pending purchase need approval to concern persons, the mail is send with all action buttoms in the body of it, but when pressing approve the, new mail message is come like belwo to be sent to application notification account:
    Action: 'Approve'
    If forwarding this document to another person, please enter their user-id
    below
    Forward To: ''
    Note
    Note: ''
    NID[7087840/247061946987240358118012562044402735957@WFMAIL]
    if the mail sent the purchase is not gerrting approve also, i want to know how can approval done from the notification mail itself without logging to application.
    Hafizoo

    Hi Hafizoo,
    The notification mailer needs to be configured for both outbound and inbound emails.
    I believe that the configuration for inbound emails is not correctly done.
    If you do under OAM, Workflow > Service Components > Workflow Notification Mailer, you will see two setup sections for "Inbound EMail Account" and "Outbound EMail Account". Also at the top of the page you have a "Test Mailer" button which first sends a notification which allows to test the outbound mail and when you reply to the mail, the notification status and comments should get updated through the inbound mail.
    If you are not able to complete the "Test Mailer" flow, it means you have to see with your DBA to correctly setup inbound messages.
    Before trying to troubleshoot the PO Approval workflow, ensure that the "Test Mailer" works properly.
    Hope this helps,
    J.

  • Approve button of PO Approval Notification not functioning properly

    Hello,
    We are using PO approval workflow for our PO approval process.
    The approve button of the email notification is not performing the intended action, that is approving the PO.
    Since the approve is not functioning,we had to approve it from oracle.Is there any reason for this?
    Kindly let me know if there is some solution to handle such issues.This is a critical issue because not all the approvers can login
    to oracle and approve this everytime.
    Thanks in advance,
    indu

    Pl post details of OS, database and EBS versions. Has inbound processing been enabled ? Has this approval process ever worked ? If so, what changes have been made that caused it to break ? Are there any error messages in the workflow log file ?
    Configuring the Oracle Workflow 2.6/11i.OWF.H Java-based Notification Mailer with Oracle Application          (Doc ID 268085.1)
    Example Of Configuring Workflow Java Notification Mailer With Oracle Applications 11.5.x          (Doc ID 249957.1)
    Inbound Processing Is Not Happening While Approving/Rejecting From Emails          (Doc ID 418931.1)
    How To Troubleshoot When Email Notification Responses Are Processed But The Approval Workflow Still          (Doc ID 458665.1)
    Troubleshooting Inbound Email Notifications          (Doc ID 1184846.1)
    A Guide For Troubleshooting Workflow Notification Emails - Inbound and Outbound          (Doc ID 831982.1)
    HTH
    Srini

  • How to modify message or subject in po approval notification

    sir,
    please tell how to modify message or subject in po approval notification process ,
    new database item should get displayed in either message or subject
    regards

    Hi, you'd have to load the .emlx file for it into something like Text Wrangler, modify it & save it, I think the only way in Mail would be to Forward it to yourself with an edited Subject line.

  • PO Approval Notification...

    Hi,
    There is client's requirement where whenever a PO is raised by any person a notification mail needs to be sent to his higher authority informing him of the PO details.The Position hierarchy setup has been done.Workflow mailer has also been configured. What I want to know is how to send this notification mail??Is any seperate setup is required for implementing the same??
    Regards,
    Rupdipt

    Hi,
    You mentioned that : There is client's requirement where whenever a PO is raised by any person a notification mail needs to be sent to his higher authority informing him of the PO details.
    Could you please confirm if the higher authority is the PO approver or you want to send a notification as FYI.
    You also mentioned that you are following positional hierarchy and not employee-Supervisor relationship.. We assume that positional hierarchy setup is proper at your end.. If the higher authority is the PO approver then system will automatically send mail /notification to him/her for PO approval.. Let us know incase you want to send a notification or FYI mail to higher authority who is not the PO approver...
    Regards,
    S.P DASH

  • PO Approval Notification to Originator

    Hello,
    When a PO is created and is forwarded on for approval, when it is finally approved does the originator or Buyer receive an email stating its approved ? Does this functionality exists in Oracle & if Yes, what setups are required to enable the same.
    Thanks,
    Shilpa.

    Hi,
    Your question : Is this option available in 11i also or in R12 only ?
    Ans : Yes available in both 11i and R12..
    Q: Do we need to do anything with the PO Approval Workflow to get this notification ?
    Ans : Hope you have done appropriate setup in Document Type (Purchasing>Setup>Purchasing>Document Types)..
    PO WF is basically derived from the Document type. In the Document type attribute e.g. say Purchase Order Standard Approval Workflow is normally set as : PO Approval and Workflow Startup Process as : PO Approval Top Process..
    we believe below are the prerequisite for WF to send mail for approval...
    - Make sure notification mailer is up and running
    - WF background process is scheduled
    Kind Regards,
    S.P DASH

  • Notification mails are not sent using RSWUWFMLEC

    Hi Experts,
    We are using SRM 4.0 and we have an issue with Notification mails,
    The report RSWUWFML2 for sending notification mail to outlook for work item,which we have been using .
    We have recently started using the report RSWUWFMLEC for sending the offline approval mails to users who have the attribute Forward_WI.
    We have given privelage only to few of the users to approve through offline.
    So, the report RSWUWFMLEC sends them the offline approval mail.
    We also have the report RSWUWFML2 which needs to send the notification mail to all the users, irrespective of the Forward_WI attribute.
    As we are using both the reports simultaneously we are facing the problem.
    Can you suggest a way so that we can send approval mails to the users who have attribute u201CForward_WIu201D checked and notification mails to all users by using report : RSWUWFMLEC
    Thanks,
    Sandy.

    Hello Sandeep,
    Using both RSWUWFML2 and RSWUWFMLEC reports, just give a different job suffix (selection text P_JOBSUF ) using a variant for each report: by default, it is '2' for both.
    In this way, in SWU_WLSCAN table, you will have one entry for each report (field CURR_NUMB ). So, last date and time for report execution will not be the same for both reports, which cause behavior you described.  
    Regards.
    Laurent.

  • Notification mail not send

    Hi All,
    I have an issue in PR workflow.A notification mail is send to user to approve a PR,but the user says that he did not receive that notification mail.He manually goes to transaction & approve the PR & workflow gets completed.
    Please let me know how to find out the cause of this problem.In my workflow log it shows workitem approved by the user.
    What can be the cause that notification mail is not send.The user email id is maintained in su01.
    Please help.
    Thanks in advance

    Hello,
    You wrote:
    "As he executed that step manually ,automatically the workitem got deleted from the user inbox"
    This is not something that happens automatically. Is the workflow listeing out for an event which tells it that the activity represented by the step has already been done?
    I assume you mean the user performed the operation that was supposed to be done via the workflow step, not that he performed the workflow step itself. If the workflow log shows that he did perform the step, then the user is mistaken.
    regards
    Rick Bakker
    Hanabi Technology

  • Send Link of Display Purchase order in notification mail(Urgent)

    Hi Friends,
    When ever a PO is Approved, a notification mail is supposed to be send & in that mail ...the link of Display PO is to be added..
    Please help out in detail .....
    Thanks,
    Kartikey Rawat.

    Hi,
    If you are using Send Mail step associated with SELFITEM.SENDTASKDESCRIPTION to send mail from your workflow, to send attachments you need to do the following bindings to your send mail step.
    <your attachment object> -> &_Attach_Objects&
    <your attachment object> -> &Attachments&
    However, before this you should have your attachment as SOFM Object instance.

  • Approval notification emails missing link to login to SRM

    Environment: Standalone
    I have created the one shopping cart. Then the approver received the Email notification for approving the shopping cart.  Link login to the SRM missed in that approver's mail.
    Thanks,
    Ravi V.

    Hi Muthu,
    When I am creating the shopping cart the approver normally receive the E mail as:Escalated: Shopping cart of Bill Memore value 799.98 USD.  In that mail the SRM web portal link for login by the approver missed.
    Thanks,
    Ravi.V

  • How to add a new field to the notification mail

    Hi All,
    We want to add the description of the GOA to the notification mail. Currently when an approval is required the following mail is sent:
    #CONTRACT.VERSIONTYPENAME# no.#CONTRACT.OBJECT_ID# was designated for release by employee#CONTRACT.CHANGEDBY#.
    You are responsible for checking this decision and then either approving or rejecting it.
    *To log on to the system, click the following link:
    So there is only the document number, document type and last changed by information in the notification mail. How can we add the description of the document?
    We have checked the related container and could not find the description of the document.
    Awaiting your reply

    Hello Emre,
    the mail is generated by report RSWUWFMLEC. You have to modify this report to change the mail text.
    An easier way might be to change the subject of the mail which is generated from the workflow task. You can enter the description of the GOA in the workitem text of you active workflow (WS14000088, task TS14007969?).
    Best regards,
    Karsten

  • Custem Work Flow Notification Mailer -HRWPM-Performance Appraisal

    Hi Guys,
    I have defined a custom mailer for performance email redirection. but only approval emails are not redirecting regarding Performance appraisals, Should I define Custom mailer for Approval emails to be re-directed on another email address despite of by default.
    the workflow item which i am using HRWPM for Performance emails, Which workflow item should I use for Performance Approvals.
    Regards,

    I am trying to stop Performance Email Notifications , for this I have created custom notification mailer and redirected all emails to another email address, by doing this system is work according to requirement but unfortunately when we approve performance appraisal the email notifications are not redirecting to desired email address.
    Kindly suggest me how to redirect Performance Management Approval E-mail notifications

Maybe you are looking for