Approval of Terms & Conditions
Terms and Conditions are often integral processes in forms submissions. Does FormsCentral have an elegant way of acheiving this in a way that meets strict legal standards. I can think of a few different ways of achieving this result, but would rather not have to recreate the wheel if someone else has acheived the same result.... especially when the terms and conditions are very lengthy. Can someone suggest a best practice for having a user approve multiple terms and conditions as part of a forms submission?
Have you considered using the "text box" to spell out your terms, in conjunction with a [Do you agree to this Specific Term?" check "yes" or "no"] ?? Terms can be located and read by user with clicking on the "question mark" symbol to show the "text box"
There is also the function of the "Skip Logic" which may be useful in conjunction with "Insert Page Break". Perhaps you could devote an entire page to the Terms & Conditions at Font size 9 or 10. (still readable and not too small)
Similar Messages
-
TS4425 How can i do when the latest iCloud Terms & Condition does not pop up?
When I go to photo stream on my appletv, it says "unable to sign in The icloud terms of service have changed. For more info, go to http://www.apple.com/support/icloud".
I have tried this resolution on my iphone and ipad already:
On your iOS device, tap Settings > iCloud.
Note: Verify that this is the same Apple ID you are using on the Apple TV.
After a moment, the latest iCloud Terms & Conditions will load.
Unfortunately, it does not pop up the icloud terms and condition for me to accept.
Anyone can help me?
Thanks all~Caused by the Ask Toolbar extension in Firefox 3.6.13, disable that extension or un-install it.
-
Can't view terms & conditions in app store when trying to update apps
When trying to update my apps, I get a notification that says:
iTunes Terms & Conditions Have Changed
Before you can proceed you must read & accept the new Terms & Conditions
I am given the options "Cancel" and "OK". Upon clicking "OK", however, the Terms & Conditions do not show up. Instead, I am just back at the screen that shows my available updates.
Please note that this issue is different from other issues that say they cannot update apps because of this pop-up; their situation is that the Terms & Conditions show, and they are given an option to accept the Terms & Conditions, but upon doing so and trying to update the apps again, they are prompted with the same message. I am completely unable to view the Terms & Conditions entirely.
This may or may not have to do with another minor issue I'd been experiencing where certain applications do not allow me to switch to or from the application. For example, whenever I receive a text notification pop-up, clicking "View" or "Reply" will simply close the window but it will remain on the window that I am currently on and will not switch to the text messaging app. This also seems to be the case when a notification occurs in the notification center and upon clicking on the notification, nothing happens. This only happens to select applications, not all of them.
I am currently running on iOS 6.1.3 on a 16GB iPhone 5 with Verizon Wireless as my provider.I agree with you. I have just encountered the exact same problem and it's frustrating. It's a bug.
Opening iTunes didn't solve the issue in my case.
Here's a description of the problem and the solution I found:
Problem
1. Opened the App store
2. Logged into my account
3. Clicked on the download link for the app in question — was presented with the dialogue that I should accept the terms and conditions etc — and pressed OK.
4. Nothing happens. Repeated step 3 many times but nothing happened.
Solution
1. Quit App store
2. Launch App store again and repeat step 3 above.
3. The terms and conditions will appear on the screen for you to accept and you can then proceed with your download/purchase. -
Term&conditions in the purchase order smartform
Dear friends ,
I am struggling with a purchase order smartform where in the first page layout i have
1.addres
2logo
3. po header detail
4.delivery window
5. and now i have a table in the main window to dispaly the item and tax details.
6.And then a footer window.
All this is fine i did. but in the next layout
1. the remaiing part of the item details
suppose there are 7 items in first page 6 items and footer is displayed nad in the next page item no-7 and then
2.P.o value
3.terms & conditions
4. footer is display..
I am very confused...as if the item is 10 then how i will manage the positions of the terms & conditions and footer windows.
pls help ....
on how to design for the second page..i am not well versed with new page-counters..may be that is stopping me ..
pls advice...
thanks.Hi Simraan,
I guess u just want the term's and condition window to be printed only once after the all the items in main window are printed.
If this is the issue,
then solution is as follows------>>>>>>>
As main window length is variable....it extends according to the no. of table entries can extend to number of pages.
if u want to make anything print just after the complete print out of table in main window then u can declare a TABLE LINE inside the footer of the table and go to Condition tab of the Table line in smartform there in bottom there would be an event ONLY AT PARAGRAPH END, Select this even, once u select this event and inside the corresponding table line if u declare ur terms and conditions then this table line would be printed just Once in ur smartform just after the Complete print of ur table in Main Window.
Hope this resolves ur issue.
Regards,
Akash Rana -
Terms & Conditions problem in App Store
I want to install a free app on my Iphone. But every time that I try, app store show me a message of "Terms & Conditions have changed.." that I should agree. I have agreed around 15 times and I still can't download the app. Can anybody help me?
I'm using the Guatemala itunes store with a Guatemalan credit card, and i have downloaded about 40 aplications since april 09' and never with a problem, until this monday, that every time i try it shows me that "Terms & Conditions have change"
Yo estoy en las mismas, y es que ni en la compu me deja bajar ninguna sola aplicacion, ni menos en el iphone.
Lo raro es que probe bajar una aplicacion gratis en mi ipod touch y si me dejo, y otro cuate con otra cuenta probamos y en la cuenta de él si puede descargar todas las aplicaciones. hay me cuentan si saben algo... -
Hi,
I am upgrading the OS of my iPhone5 to iOS7 directly from the device.
It downloaded and started upgrade. During the upgrade process I got stuck in 'Terms & Condition' for iCloud.
I clicked on 'Agree' buttom multiple times. Still itnstallation is not moving forward. It always remains in the same page.
Now I cannot come out the installation process. Even the 'Disagree' option is not taking me out from the 'Terms & Condition' page.
What may be the possible reason? Am I going wrong anywhare?
Regards,
RajeshThere are various solutions to this posted in this discussion: https://discussions.apple.com/thread/5321627?start=0&tstart=0. Perhaps you'll find one that will work for you.
-
Showing only Approved Metapedia Terms
This question is two fold:
1) Is there a way to only show approved metapedia terms?
2) How have others managed their metapedia terms in a "multi-tier" environment (dev / qa / prod)? Do you promote your terms / changes through different environments or do you manage your terms in one environment? What is SAPs suggested best practice here?
I'm trying to achieve the scenario where metapedia users only see approved terms. Right now we are controlling this through drafting the terms in one environment and then exporting / importing them into another environment as approved.
Thanks!!
TomThis can be achieved by setting up appropriate user permissions. Note that for Metapedia there are predefined user groups - Metapedia User, Metapedia Author, Metapedia Approver and Metapedia Administrator.
Among these groups Metapedia Users can only view approved terms. Metapedia Author, Approvers participate in the process of creating the draft definition, refining it and approving it. Once the term is approved, it is visible to Metapedia Users. Also if for some reason author starts revising an approved term - the changes made by the authors are not visible to Metapedia User until the revised term definition is approved.
Given this context, you should be able to manage all Metapedia activities in the same environment. You do not need to have separate Dev and Prod environment for Metapedia scenarios. -
Print Terms & Conditions in the Back page in Sapscript
Hello Experts,
I need your help.
I have one sapscript. I want print Terms&Conditions in the back page.
My Sapscript is a copy of MEDRUCK.
I want: When NACHA = 1 --> Print Terms&Conditions on the reverse side of each page.
When NACHA = 5 --> Print Terms & Conditions in the last page (Not in the back).
I did one example of sapscript with only one page First. I created a second page Back.
The first point at Back and has the print mode 'D'.
The Back point at First and doesn't has any print mode.
My problem is:
1- Always, i have the last page without Back page. Always i have an odd number of pages. Normally i must have a peer number. Each page has the back page. But, is not the result.
I tried to call NEW-PAGE BACK at the end of the last page First like that:
If &NEXTPAGE = 0&
NEW-PAGE BACK
Endif.
But doesn't work. NEW-PAGE works only in the Window Main and &NEXTPAGE& = 0 works only in a window not main. So, i can't use them at the same time, in the same window.
Can any one help me please? I'm blocked and i can't resolve the problem?
And what i must do for NACHA = 5?
Thank you.
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Aug 15, 2008 4:59 PMHi,
This problem is caused by the printer which does not understand the sapscript page commands. Basically you need to embed printer specific commands for controlling output so that on particular conditions the output in printed double sided for the first 2 pages then each page single sided.
This is not easy, and can change depending on the printer being used. I would not recommend this type of action in SAPscript or SMARTforms.
Cheers
David Cooper -
Approval Tempate Terms Query Problem
I have a query that i've included in the Approval Tempate - Terms Tab, that checks to see if any order lines after discount price is less than a Item UDF minimum price for the item. It is as follows:
SELECT DISTINCT 'True'
FROM [dbo].[ORDR] T0 (nolock)
INNER JOIN [dbo].[RDR1] T1 (nolock) ON T1.[DocEntry] = T0.[DocEntry]
inner join [dbo].[OITM] T3 (nolock) on T3.ItemCode = t1.itemCode
where T0.[DocNum] = $[ORDR.DocNum]
and T1.INMPrice <= T3.U_LBSiMinPrice
My problem is that the Approval is not kicking off no matter the outcome of the query. Meaning if the price is < the minimum price or > the minimum price, the approval pop-up window does not appear.Hi Scott,
B1 does not support approval queries on document lines. you can query only document header.
you can either try to workaround it with all sorts of aggregate UDFs in the header, or alternatively take a look at:
[http://www.beonesolutions.com/ip/Solutions/ap.html|http://www.beonesolutions.com/ip/Solutions/ap.html]
all details, including the ability to query all document tables, are in:
[http://www.beonesolutions.com/files/Approval_Pro_Brochure.pdf|http://www.beonesolutions.com/files/Approval_Pro_Brochure.pdf]
Gilan -
I have a problem with IOS 7 I think.When I want to download a app says cause Terms & Conditions have changed and I taped ''OK''. I read it but there is no Agree or accept button! I can't accept it because is not an agree buton.There says if you agree please accept but there is NO Agree or Accept BUTON! What can I do?
It doesn't work! I tried to reset the ITunes account and the IOS Device but nothing happens! I tried to download another app but after I write my apple ID and my password says '' iTunes Terms & Conditions Have Changed
Before you can proceed you must read & accept the NEW Terms & Conditions'' ''Cancel'' or ''OK'' I tapped ''OK'' and there says me all the new terms & conditions of 74 pages... I red them but when I was on 74 page is no ACCEPT or Agree BUTTON!!! I will try again to see if it works! THANKS ANYWAY! -
After log into SAP Portal, Terms&Conditions Window should open
Hi Team,
As per one of the requirement in my project, i have to develop below applicaiton.
Requirement: Once user logged into portal & trying to access his role first time in a year, Terms & condtions window should open, once user accepted the terms& condtions, user can access his role. if user entered into portal second time in a year, direclty can access his roles.
For this: i have created webdynpro-java application with empty view & portal abstract portal component with terms & conditions text, then i have created portal Iviews for both webdynpro-java application and abstract portal comonent, then i am calling abstract portal component Iview into webdynpro-java component controller wdDoinit() method via WDPortalNavigation.navigateAbsolute() method.
Finally, i have assingned webdypro-java ivew to Test Role: once click on role it is calling Terms&Conditions pop window.
Questions:
1. how can i use same Iview in user actual role, i mean, once user click on his role first time terms & codition window should open? after accepting terms & condtions only his role can access...
2. how can i navigate from terms & condtions to his role?
3. if user didn't accept terms&conditions, he can't access his roles, how can i handle this?
4. how can i check, if it is user first login into portal or not in a year ? where i have to store this user data? what are the parameters i have to use?
can you please help me on this?
Thanks
Sandeep.sandeep kumar wrote:
> 1. how can i use same Iview in user actual role, i mean, once user click on his role first time terms & codition window should open? after accepting terms & condtions only his role can access...
> 2. how can i navigate from terms & condtions to his role?
> 3. if user didn't accept terms&conditions, he can't access his roles, how can i handle this?
> 4. how can i check, if it is user first login into portal or not in a year ? where i have to store this user data? what are the parameters i have to use?
I would redefine com.sap.portal.navigation.portallauncher.default component for your purpose
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/44/42c08f81ce2152e10000000a114a6b/content.htm
so WDJ is not really an option here.
To store whether display T&C screen you can use custom attribute on user profile
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/44/0316d50bbe025ce10000000a1553f7/content.htm
public class MyPortalLauncher extends PortalLauncher
public void doContent(IPortalComponentRequest request, IPortalComponentResponse response)
INodeList nodeList = request.getNode().getChildNodes();
if(nodeList != null && nodeList.item(0) != null)
//Check value in user profile whether he accepted T&C this year
//if no - navigate to T&C page
IResource jspResource = request.getResource("jsp", "jsp/termsAndConditions.jsp");
response.include(request, jspResource);
//else - process as usuall
response.include(request, nodeList.item(0));
else
IResource jspResource = request.getResource("jsp", "jsp/noRoles.jsp");
response.include(request, jspResource);
//implement
public void onAcceptClick() throws PageException
//set user attribute value if accepted, logoff is rejected -
How to provide terms & conditions option while installing an AIR application
Hi
I have an AIR application which is developed using flex SDK. I have got an requirement that when the user tries to install the AIR application, I need to display the terms & conditions details. If the user accepts the terms & conditions, it need to be install the application. Is it possible to do?
And also i need to set the expiration date (i.e. trial period) so the application gets expired on the specified date in the user's machine. I am not sure whether these two things are possible? Please advice.
ThanksHi Douglas,
Thanks very much (and to Chris) for getting back to me.
I attached a zip file that is a small 'hello world' AIR application that I
compiled using FlashBuilder 4, configured to use the 4.1 sdk. I also
attached the self-signed certificate I used when exporting the release
build. The password for this is dogdish. This application gives the error
messages I indicated in my post when attempting to install on the Mac where
the AIR runtime is not yet installed.
We recently upgraded from FlexBuilder 3 to FlashBuilder 4, which I believe
is when this issue started. I followed the instructions for doing a side-car
installation and had no problems with either Mac or Windows when using
FlexBuilder 3.
Thanks for any help you can provide! -
I need to throw an error message if the terms&conditions checkbox is not checked on click of Submit Button in webdynpro java. Can anyone suggest.
My Apologies. The simplest way- write the following code in the action of the Submit button-
if (<check box not checked>)
wdComponentAPI.getMessageManager().reportException("Please accept Terms and Conditions to continue",false);
else
continueExecution();
The exception message will be shown on top of the view.
You may like to use Message Area UI element and place it at the bottom of the WD4J view to show our exception message at the bottom of the view.
I hope this helps !
Cheers,
-Amol Gupta -
Tried to upgrade my mini iPad from its original iOS 6 version to iOS 7. All nearly completed but I can't get past the "iCloud Terms & Conditions" & "Privacy Policy" page as prompting to "Agree" or even "Disagree" at the bottom of the page does not let the iPad progress (or even backtrack) to any other display!
I can actually see the GHOST PAGE titled "Find My iPad in iOS 7" concealed partially below the "Terms & Conditions" page.
Since touch-prompting "Agree" on "Tems & Conditions" page failed to get any response,I also tried prompting "Disagree" in the hope that the upgrading would cancel or withdraw so as to go back to a perfectly working order version iOS 6 as before but unfortunately NOTHING AT ALL is happening & the iPad has become totally unresponsive. Can anyone please guide me as to how to Restore my iPad to its working state as before?Try reset iPad and continue with update.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
How do you get pass the Terms & Conditions page while downloading iOS7. Nothing happens when press AGREE
Reset iPad and continue with update
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
Maybe you are looking for
-
Condition Type Values are in display mode during PO amendment
Dear Friends, I have this issue in import PO. 1. Process is we created an import PO with all necessary values filled under respective condition types to arrive at assessable value but Local freight cost is not known at this point since values are mad
-
Hello, I wonder if someone can steer me in the right direction on this please. I have a user who wishes to send a message with attachment that is 13Mb in size. I have been through what I believe to be all the settings concerned with message/ attachme
-
How to access/open rpd files in offline mode from client desktop
Hi All, Please tell me what configuration settings I need to have on my desktop to access RPD files stored on BI server? In our OBIEE environment, we have BI server installed on linux server, and I have installed BI admin tool on my desktop (Windows
-
Posting PO through idoc PORDCR101
HI Through this Idoc PORDCR101 trying to create PO in the system. Need to change the calculated price getting fetched in PB00 condition type with the legacy value while creating PO. trying to upload the legacy PO with their old price ,but the po
-
I'm exporting a CMX 3600 from 4.5 (that I've done 100's of times) and all the sudden I'm getting this..... 005 MISSOULA V C 01:02:43:17 01:02:45:24 01:01:11:26 01:01:14:03 005 MISSOULA V D 030 01:04:57:03 01:05:01:03 01:01:14:03 01:01:18:01 * EFFECT