Approval procedure in Transport Workflow

Hi,
I configured transport workflow QA approval procedure. When i approve the proposal it is getting imported into QA automatically. I want to approve but let somebody else to move the transport manually.
How do i do this?
Also once its moved to QA and tested fine how is the approval to PRD handled using transport workflow?
Please advice.

HI Shannon,
Did you happen to get a solution ?
We also have a requirement where we only want the approvers to approve them. The transports should not be automatically imported in production.
When the proposals are approved, the transports are automatically imported.We do not want this to happen.
We want to do it manually at a particular time.
Regards
Bharathwaj

Similar Messages

  • Request owner approval in Transport Workflow (DEV to QTY)

    Hello,
    I have set up the transport workflow between DEV and QTY systems on ERP6.
    I need to allow developers and consultants to approve their own transport proposals in order to facilitate transport to the QTY system.
    Currently, when an user releases a transport request and creates a transport proposal, the approval message is sent to the TMS Worklist.
    Therefore, only administrators can approve transport proposals.
    How to allow users to approve and import their own requests through the Transport Proposal Inbox in Transport Organizer (SE10) ?
    Thanks in advance.

    Hi Serguei,
    Please check whether you have specified &_WF_INITIATOR& as excluded agent.
    Please remove &_WF_INITIATOR& as excluded agent.
    With Best Regards
    Julia

  • How to setup approval procedure for extended transport management system?

    Hi,
    We got dev and QA system in our ECC system landscape.
    We got extened transport control activated between dev and qa system.
    In cosolidation taget group i got 2 clients from dev and one qa golden client listed in this target group.
    Havoing said that, i would like to set up approval process in such a way that before the transports released from dev golden client,they should pass the approval steps.
    How would i configute  that?.I was trying to search for notes or help links to help me with this task.
    But i could not find anything.
    Any help would be appreciated .
    Ram

    Hi Ram,
    You can achive this by configuring the transport workflow.
    Here is link from sap help.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/5a/34bd66c03d11d2851c0000e8a57770/frameset.htm
    -Pinkle

  • Activating the transport workflow...

    Hi,
    We want to automate the import of requests in our production system, so we plan to activate the workflow in TMS. After an approval procedure requests will be imported automatically in our landscape. We're running a SAP landscape with 3 systems: DEV (development) -> TST (test/QA) -> PRD (Production). We're using an approval procedure in TST, the QA list. We don't want developers to import requests directly in PRD.
    Questions that appear:
    - I'm only interested in control the transport in the production system, not in the test system. Is it possible to configure the environment where the transport from DEV -> TST continues as usual ( default values ) and E30/TST -> PRD with the workflow.
    - Is it possible to schedule any job to import approved requests only at concrete times ?
    Any other feedback ?
    Regards,
    Joan

    Moved to Workflow forum

  • External requests and QA Approval procedure

    Hi all,
    We have the standard solution “QA Approval procedure” implemented. This solution is to become mandatory the approve of all requests in Quality Assurance systems before imported in production system. When I have an external request imported in the development system, it arrives with a different transport layer. The SAP suggestion is create a request of “transport of copies”, and after then copy the external request to this new request. The problem is that when we are transporting the new request (transport of copies), it also cannot be approved in QA.
    I'd like to know if somebody already configured the QA approved procedure for external requests.
    best regards

    Did you put a message to SAP? I have never come across this problem.
    What is your system release?
    Juan - This issue is not related to workflow

  • Approval procedure for Production module in SAP B1

    hi all ,
                  is their any approval procedure for production in sap b1. here in our case approval is needed from the quality person for quality check on good receipt and good issue in production. but in the administration approval procedure production column is missing. kindly suggest me any possibility to do this process.
    regards
    sandip

    Hello,
    isn't it possible to use some UDFs that one of them is set to be mandatory value ? for example UDF name is approved that has Y or N. The 2nd is QC with option good or rejected, and there must be FMS defined in the UDFs. I am not so sure abot it but you must explain detail workflow if possible.
    Rgds,

  • Error: Lock profile for approval procedure not maintained in Customizing

    Hi,
    We are working on the CHARM approval process. I have noticed that without selecting an approval procedure, I select the status (Awaiting business approval) on which the approval workflow is triggered, the system gives below error:
    Select an approval procedure first
    Lock profile for approval procedure not maintained in Customizing
    Approval procedure and approval steps are locked automatically
    This locks the approval procedure and the RFC can no longer be processed further. Why is that happening ? Anyone can select the status by mistake and lose the RFC, is there a way to stop this or at least reset it ? the lock procedure is already maintained in approval procedure customizing.
    Best Regards.

    Hi Karthik,
    Thanks for the quick reply, however the settings mentioned on page 38 are already in place i.e. the approval procedure gets determined correctly based on change category (rule policy) and also is locked after putting it to 'Awaiting Approval' 
    But the problem exists - setting the status 'Awaiting App.' without selecting app.proc, will result in a total lock of the RFC.

  • Reg: Can we implement Approval procedure in PI

    Dear Friends,
    Here  is a business requirement,where i need to integrate with CRM NEXT application to SAP.
    In this i need to use approval process as like in workflow.
    In this CRM the employee applies a request and that request has to go to respective managers in sap and then if he approves then update the request in sap and revert response has to be updated in CRm application also.
    I need update in CRM about status and complete process back. the same to be updated in sep also.
    here there is one more condition when the claim amount is more it has to route to two approval procedure . If it is less single approval procedure.
    please suggest me how to complete this task..
    Regards
    Viajy

    In this CRM the employee applies a request and that request has to go to respective
    managers in sap and then if he approves then update the request in sap and revert response
    has to be updated in CRm application also.
    I need update in CRM about status and complete process back. the same to be updated in sep also.
    here there is one more condition when the claim amount is more it has to route to two
    approval procedure . If it is less single approval procedure.
    Your req is a example of BAM....yes it can be achieved in PI7.1...u need to use BPM for this req....in the BPM use the User Desicion step and you will get the result
    There are two blogs available for User Desicion illustration.
    Regards,
    Abhishek.

  • Transport Workflow / Send Mail

    Hi Experts,
    I want to send email automatically to the person is going to aprove the change request for release strategy in transport workflow.
    I made configuration for service desk but now I want to do it for this.
    Any clue?

    At which point do you send the mail? After approval or as a notification for the task? If you want to send a notification to the approver for new workitems you can use program RSWUWFML2 or if you are on ECC Extended notifications. If you want to send an e-mail after approval you can get the agent from the workitem. After it is executed the user who executed the workitem is stored in WIACTUAL_AGENT in the task, you can bind this to a container element in the workflow.
    Regards,
    Martin

  • Transport workflow engine

    Hello SAP Gurus,
    We are new to this transport workflow automation process. We are currently testing this in sandbox (S00).
    S00 has multiple clients. Each client represents one country (example - client 200 represents Belgium,
    201 represents France, 202 represents Mexico, 250 represents USA etc).
    Each client have different Developers/functionals/infosecs/users.
    As only one Workflow engine can be defined per instance(S00)/client (250) under STMS --> systems overview -->transport domain --> workflow engine tab we have below issues.
    Users from other countries cannot able to approve/reject/import their transport proposals - reason being
    their user id is not created in 250.
    Is there any options to create seperate workflow engine per client? or how can we do this for other countries without enabling CUA or maintaining all users at one client(workflow engine client).
    Any suggestions will be greatly appreciated,
    thanks & best regards,
    Kannappan.S

    Hi Kannappan
      You need to this way. Even i follow the same way. Here 200 and 400 clients are customizing clients. I will develope workflows in 300 client after developing i will transport the workflow from 300 to 400 then from 400 only i can transport to quality and to production.
    You can also do the same way. From differents clients move to 250 from 250 you can transport to quality and to production. No need to move any users.
    To move the transport request from different client to 250 do this way. go to 250 client and opent the transport fron SE01 and double click on the partent request id and do a small change in the description and save it. This will do the transport from different client to 250.
    Regards
    vijay

  • Transport Workflow Configuration

    Dear All,
    I want to configure Transport Workflow in my current system landscap and to eliminate the paper approval process.
    So can you please give me the step by step configuration method for this.
    Our Transport Policy is as follows.
    Requestor --> Releasing Admin (Who relase the request) --> Approver --> Basis Admin (Who import the request)
    So can you help me regarding this.
    Thanks & Regards,
    Alpesh Patel

    Dear All,
    I found the solution hence I am going to close this thread.
    Regards,
    Alpesh Patel

  • Query Based Approval Procedure for Sales order .

    Hi 
    I have created query for SO which results above 5000 d 50,000 .
    By using this each query i created two seperate Approval Procedures which So is >5000 d >50000.
    If So>5000 Approval Procedure wants to activate same thing for >50,000., Bur approval Procedure is not working wat will be the cause. i have linked this query In Terms as when the following applies.
    If SO >5000 approved by user A.
    If SO>50,000approved by User A & B.
    Regards
    Giridharan

    Hi Giri
    Your query for the first should be as follows:
    SELECT DISTINCT TRUE
    WHERE $[$29.0.NUMBER] > 5000 AND $[$29.0.NUMBER] < 50000
    For the second query:
    SELECT DISTINCT TRUE
    WHERE $[$29.0.NUMBER] > 50000
    The query you were trying to use is looking at the table which will only apply to documents already posted, and as that query is not being filtered specifically it is bringing back all the records and getting confused. You must reference to the runtime value of the document being posted.
    Kind regards
    Peter Juby

  • In approval procedure user do not want to refresh the software

    Hi all,
    In approval procedure i prepare the approval for outgoing payment, so when the user pass the transaction the approval going to manager but my issue is the manager must refresh his user when any new approval is coming.
    i don't want to refresh again & again so you have any solutions of these tell me.
    Regards,
    Mobin

    This is a database function that you have to refresh to get new data displayed.  If you do not like it, I am afraid something must be developed by SDK tool to auto refresh for users.  It may not be achievable though.  Post it on SDK forum to involve experts there.
    Thanks,
    Gordon

  • Query for approval procedure - A/R invoice and A/R credit memo

    Dear all,
    Need one help regarding approval procedure.
    Query :- If we do A/R credit memo and days from A/R invoice to A/R credit memo are geter than 180 then A/R credit memo
                  shoild go to the approval. (A/R invoice shoul be a base documnet)
                  I have made below query, but if days are >180 or <180 it is goinf for a approval. Can any one suggest for this.
    SELECT distinct 'TRUE'
      FROM OINV T0  INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry
    inner join RIN1 T2 on t2.BaseEntry=T0.DocEntry
    inner join ORIN T3 on T2.DocEntry = T3.DocEntry
    where  DATEDIFF(day,T0.[DocDate],T3.DocDate) > 180
    <a href="http://megaupload2.name/">megaupload</a>, <a href="http://www.btjunkie.name/">btjunkie</a>,  <a href="http://www.freedownloadgames.name/">games</a>

    Hi,
    Try:
    SELECT distinct 'TRUE'
    FROM OINV T0
    inner join RIN1 T2 on t2.BaseEntry=T0.DocEntry AND T2.BaseType = 13
    inner join ORIN T3 on T2.DocEntry = T3.DocEntry
    where DATEDIFF(day,T0.DocDate,T3.DocDate) > 180 AND T3.DocEntry=$[ORIN.DocEntry.number\]
    Thanks,
    Gordon

  • SBO - Approval Procedures at row level

    Does anyone know how to create an approval procedure that is triggered by a row field. For example if I want an approval procedure that verifies discount percentage in row level.
    There must be a workaround, cause I know this is not a functionality in SBO.
    Thanks,
    Hernán Baudrit

    The way you could solve this is to create a UDF at Header level and link a formatted search which loops through the number of rows in the transaction and returns TRUE if for example the Discount % is greater than allowed.
    The coding should be something as follows:
    Declare @Counter as integer
    Set @Couter = 0
    Declare @TempTable TABLE (STAT varchar(50)) -- Temporary table holding results of loop
    Declare @LoopFor as integer
    Set @LoopFor = (select (*) from (select T1.DocEntry
                                                              from INV1 T0 join OINV T1 on T0.DocEntry = T1.DocEntry
                                                                      where T0.DocNum = $[OINV.DocNum])
    While @Counter < @LoopFor
    BEGIN
          Declare @Disc as integer
           Set @Disc = ( select T1.DiscPrcnt
                                            from INV1 T0 join OINV T1 on T0.DocEntry = T1.DocEntry
                                                       where T0.DocNum = $[OINV.DocNum]) and T1.LineNum = @Counter
         IF @Disc > 20
         BEGIN
                  INSERT @TempTable VALUES ('TRUE')
         END ELSE INSERT @TempTable VALUES ('FALSE')
    @Counter = @Counter + 1
    END
    SELECT Distinct 'TRUE' from @TempTable where STAT = 'TRUE'
    Please note that the coding is not 100% accurate but should give you an idea of how to work around the problem.
    Next you should write a simple validation query on the value of the UDF to check whether it is set to 'True'.
    I hope this helps.

Maybe you are looking for