Approvals Management Engine applicable Product Families

Hello,
I was wondering what product families/modules AME was able to be applied to within both the 11i and r12 environment. In particular if the GL - Journal Entries could utilize the AME approval system.
Thanks,
-Steve

Hi Steve;
Please check below notes which could be helpful for your issue:
Is Journal Approval/Authorization Integrated With Approvals Management (AME)? [ID 359789.1]
How To Diagnose Issues With Approvals Management Engine (AME) In Procurement [ID 428552.1]
Regard
Helios

Similar Messages

  • AME (Approvals Management Engine)  patch 6699770

    Hi Friends,
    We have EBS 11i on IBM AIX 5L 64-bit server. And the functional consultant wants to use AME.
    I read the docs and I found out that AME is installed using the patch 6699770. Is my understanding correct?
    I also searched the patch on metalink and found out only 32-bit version of this patch? Can I use this for our 64-bt server?
    Thanks a lot

    Thanks hussein,
    I am just comfused with the statement "Please note that this patch is included in (Patch 6699770 - Human Resources Suite 11i.HR_PF.K.delta.3), but it is not necessary to apply 11i.HR_PF.K.delta.3 to be on 11i.AME.B)."
    How do I know if I have 11i.AME.B.?
    I tried to get the version on AME using :
    SQL> select decode(bug_number, '2614213','2614213 (pre-11.5.10)'
    2 ,'2863619','2863619 - (pre-11.5.10)'
    3 ,'3858763','AME 11.5.10'
    4 ,'3962268','AME.A'
    5 ,'4433707','AME.A RUP'
    6 ,'4428060','AME.B'
    7 ,'4873179','AME.B RUP'
    8 ,'3333633','HR FP J'
    9 ,'3500000','HR FP K'
    10 ,'5055050','HR FP K RUP1'
    11 ,'3140000','Apps Release 11.5.10'
    12 ,'3640000','Apps Release 11.5.10 CU1'
    13 ,'3480000','Apps Release 11.5.10 CU2'
    14 ,'NONE') AME_LEVEL
    15 from ad_bugs
    16 where bug_number in ('2614213'
    17 ,'2863619'
    18 ,'3858763'
    19 ,'3962268'
    20 ,'4433707'
    21 ,'4428060'
    22 ,'4873179'
    23 ,'3333633'
    24 ,'3500000'
    25 ,'5055050'
    26 ,'3140000'
    27 ,'3640000'
    28 ,'3480000'
    29 ,'5708576'
    30 ,'5337777'
    31 );
    AME_LEVEL
    2614213 (pre-11.5.10)
    2863619 - (pre-11.5.10)
    Apps Release 11.5.10
    Are the above result acceptable? or do I have the AME installed?
    Also metalink said 11i.AME.B is superseded by 11i.HR_PF.K.delta.3 ...is not it logical to use the latest instead? :)
    Thanks again

  • Intel Management Engine Interface problem.

    Hi evryone, i have problem with Intel Management Engine Interface on my laptop HP Elitebook 8470p, I did:
    - Install driver for MEI by Drivers, Software and Firmware for HP EliteBook ... 
    - Update new bios by Drivers, Software and Firmware for HP EliteBook ... 
    But when i open Device Manager , Intel Manager Engine Interface cannot start (error code 10)
    - When i restart then open Device Manger, device MEI have not list in Device Manager.
    But when I shut down and turn on laptop, device MEI list in Device Manager with error code 10.
    Any body can help me? Thanks.

    Hi bondpham,
    Welcome to the HP Support Forums!
    To get your issue more exposure I would suggest posting it in the commercial forums since the {insert product model} is a commercial product. You can do this at HP Enterprise Business Community.
    The support page for your product may be helpful in the meantime: HP EliteBook 8470p Notebook PC Support.
    I hope this helps, good luck!
    I worked on behalf of HP.

  • Difference  Between Order Change Management & Engineering change Management

    Dear,
    What is the Difference  Between Order Change Management & Engineering change Management ?

    Hi,
    ECM will help for Master data changes management.
    OCM will help to manage changes in Transaction Data like Production Orders.
    In brief,you have to first Create Change Number(part of ECM activity).then using that Change number, Master data(like BOM, Routing etc) has to be modified.
    Then through OCM affected Transaction Data(like Production Orders) for each change number to be Processed.
    Regards
    R.Brahmankar

  • Problem in setting up Oracle Approvals Management  (AME)

    Hi Friends,
    I Receive an error message of "No rules are applicable to this transaction" during AME testing of
    a real transaction for the Payables invoice approval process.
    ### Responsibility name and request ID ###
    Approvals Management Business Analyst
    ### Responsibility and navigational paths to reproduce ###
    1. implement Oracle Approvals Management.
    2. Implement workflow for Payables invoice approval.
    3. Perform real transaction test case in AME.
    Thanks a lot

    Hi again...
    I already applied patch AME.B RUP 2 but still the same error encountered :(
    =================================
    Approvals Management Reporting Utility Support Tool
         Doc ID:      Note:287255.1
    =================================
    Based on the above, I tried to generate a report utility for AME.
    the value returned by step is 'Post-AME.B'I want to do the ff:
    1. Login to AME Application using "Approvals Management Administrator" responsibility.
    2. Search for your transaction type
    3. Click on the transaction type
    4. AME-Internal ID of the choosen transaction type will be displayed.
    Note: Please note that the AME Internal ID (Application ID) is usually a negative integer.
    Make a note of the AME Internal ID
    How do I get the AME-Internal ID ? based on the page below:
    http://rapidshare.com/files/174201557/AME2.JPG.html
    Thanks a lot

  • H77MA-G43 3570k Intel Management Engine Driver error

    Hi guys!
    i've got the following problem.
    every time i run controlcenter o biosclick ii i get the following error:
    please install intel me8 driver to enable cpu overclock
    so as a responsible person i went to my motherboard drivers page and got the
    Intel Management Engine Driver files
    i run it and then i get this error:
    this computer does not meet the miminum requirements for installing the software
    i checked and i have .net framework 4 installed but now im stuck... any ideas? i want this error gone :(
    edit:
    did what the sticky said
    https://forum-en.msi.com/index.php?topic=163549.msg1198800#msg1198800
    Use M-Flash with ME the MSI recommended way, but one that seems prone to bricking one of your bios's
    tried reinstalling the driver... no go

    im running win7 64
    i installed it from this link
    http://www.msi.com/product/mb/H77MA-G43.html#/?div=Driver&os=Win7%2064
    which says it supports the following OS
    Win8 32, Win8 64, Win7 64, Win7 32, Vista 64, Vista 32, XP 64, XP 32
    im at a loss :S

  • W 530 Intel Management Engine Firmware

    ThinkPad W530 2436CTO Core(TM) i7 3920XM running Windows 8.1(64-bit), BIOS G5ETA2WW(2.62),
    I have installed Intel Management Engine 10.0 Software10.038.1026 which resulted 10.030.1054, so fare so good.
    Tryed to install Intel Management Engine Firmware 8.1.60.1560 found on Lenovo site, not possible, why? It was the meaning to update the installed version 8.0.12.1498.
    I get the message when trying " 'FWUpdLcl.exe' is not recognized as en internal or external command"
    As I understand it, the updated version should fit my w530?
    ebbema

    Hi bondpham,
    Welcome to the HP Support Forums!
    To get your issue more exposure I would suggest posting it in the commercial forums since the {insert product model} is a commercial product. You can do this at HP Enterprise Business Community.
    The support page for your product may be helpful in the meantime: HP EliteBook 8470p Notebook PC Support.
    I hope this helps, good luck!
    I worked on behalf of HP.

  • Intel Management Engine Driver

    Is there a connection between ME in the BIOS and the Intel Management Engine Driver that can be downloaded from the motherboard product page?
    What I mean is if I install the downloadable driver from the motherboard page, does this over write something that the ME applied from a BIOS update does or vice versa if I updated my BIOS after first installing the driver from the motherboard page?
    Do they need to match as the downloadable driver from the motherboard page is a lower version number than the one contained in the latest beta BIOS for the Z77A-GD65?
    What does enabling the ME option in the BIOS do?

    I actually download my ME from Intel directly as they have a newer version than the MSI website. They don't have to match, and the one for inside windows should be updated when possible like other drivers.

  • Z87 gd65 Intel Management Engine Driver fails to install.

    The Intel Management Engine Driver from the MSI z87-gd65 website did not install correctly.
    I was updating some drivers here and there and noticed a newer version of the MEI had been released.  The installation procedure came back with a nasty error, and a pesky exclamation point showed up in my device manager.  I was able to install the newest version (10.0.0.1204) by googling for Management Engine Interface and downloading directly from microsoft, but I would have preferred to use the file on the MSI site, as I believe the one I used was intended for another motherboard.
    This is the driver I ended up installing, which worked correctly.
    Was anyone else having problems updating the management engine driver?
    z87-gd65
    4770k (stock)
    16g ddr3
    250gb ssd

    There is nothing wrong with downloading from Intel's page. It's them providing the driver anyway, and MSI just used it on their product page to make it easier to find; there's no specific driver of Intel ME for specific motherboard or setup. So you're fine.

  • SAPJSF user cannot log-on to the User Management Engine.

    We have a newly installed PI 7.0 system.
    SLDCHECK is succussful but if we go to the http://hostname:50100/sld - we are redirected to http://hostname:50100/logon/logonServlet?redirectURL=%2Fwebdynpro%2Fdispatcher%2Fsap.com%2Ftc%7Esld%7Ewd%7Emain%2FMain
    When we check the default.trc file, we see the error: User "SAPJSF" is the communication user for the connection between User Management Engine and the ABAP backend system SIDCLNTxyz. This user cannot log-on to the User Management Engine.
    The SAPJSF user is not locked in SU01.  This user is used by the JCO providers to connect to the gateway service.
    We opened Visual Administrator and navigated to Server0 -> Services -> UM Provider
    We changed the password  property at ume.r3.connection.master.passwd
    We then restarted the ABAP and J2EE engine.  But we still see this error.
    Any help to solve this issue is appreciate.
    Jay Malla

    Hi,
    Please, refer the link below. It says you cannot logon with SAPJSF user to J2EE engine for security reasons.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/4e/225b42eeb66255e10000000a155106/frameset.htm
    Thanks
    R.Murali

  • Intel Management Engine Interface, Device status: This device cannot start (Code 10).

    hi Tec,
    Under System devices for the Intel Management Engine Interface, Device status: This device cannot start (Code 10). Using original driver version: 6.0.0.1179 A released date 09-12-2009 (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-79194-1&cc=us&dlc=en&lc=en&...=), running OS windows 7 Enterprise, 64 bit. HP Pavilion dv3-2390eg Entertainment Notebook PC.
    Issue: my computer auto restart after 2 hours please resolved the issue
    Logs captured from System summary:
    [Problem Devices]
    Device  PNP Device ID   Error Code         
    Intel(R) Management Engine Interface
    PCI\VEN_8086&DEV_3B64&SUBSYS_1404103C&REV_06\3&11583659&0&B0       this device cannot start.               
    Cisco Systems VPN Adapter for 64-bit Windows                ROOT\NET\0000               This device is disabled. 

    Hi Jeenny,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing multiple issues on your ThinkPad Edge E540.
    You can download Intel(R) Management Engine Interface directly or run ThinkVantage system update utility and update the entire required driver for your system.
    Hope this helps. Do post back if issue persists!
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • ***Urgent Need of resolution***X220 driver not installed Intel Management Engine AMT 7.1

    I have a laptop refresh project strating soon and i can not deploy any X220 machines.
    After the installation of Windows 7 there is an "Unknown device" shown in device manager.
    If I uninstall the unknown device then "Scan hardware changes" the device changes to PCI Simple Communications Controller but with an ! and a message that the driver failed to install.  The driver shows an Intel driver version 7.0.0.1144
    If i reboot the system the driver no longer shows the ! and looks to have isntalled successfully.
    I also tried to run "Intel AMT 7.1 Management Engine Firmware for Windows 7 (32-bit, 64-bit)" but recieve "The setup program failed to install one of more device drivers.  Setup will exit."
    Any help would be really appreciated...
    Solved!
    Go to Solution.

    It seems that first applying the Firmware update before imaging has resolved the issue.

  • Approvals Management (AME)

    Hi All
    In the Approvals Management Implementation Guide Release 12.1 Part No. E13516-04 On page 5-5 it makes mention of the Oracle Approvals Management Developers Guide. But I cannot find this guide, looked on Metalink, Googled etc etc to no avail. Any ideas where to find the developers guide ??
    tks R

    Hello,
    Review Metalink Note HRMS Approvals Management (AME) Developers Guide [ID 289927.1] on https://support.oracle.com.
    Thanks
    Gaurav

  • Table Name and Column name for Product Family Field under the Product Famil

    Hi,
    Please help me finding the table name and the column name for the 'Product Family' field and the 'Item' field under the Product families form. The navigation to this form is as follows:
    Material Planner Responsibility -> Setup -> Product Family
    Please help.
    Thanks,
    KM

    2 months ago, you asked a very similar question... and Markus gave you a good answer. His 2-months old answer still applies here.
    I recommend that you read it a again at Table name for backorder qty on sales order.
    When you have read his answer, please close both threads.

  • No user is able to login to User Management Engine in SAP Web AS Java

    Hi,
    We are facing an error"User Authentication failed" in SAP Web AS Java(Stand-alone).
    No user is able to login through User Management Engine but we were able to login as administrator into Visual admin.Tried SAP* (Emergency User Activation in config tool) also.SAP* is also able to login to Visual Admin But not into UME.Login in Visual Admin was successful when we tried with SAP* or administrator.
    Feels like some UME configuration might have changed.Can anyone help me in this.
    Thank You.
    Regards,
    Sudheer.

    Hi
    Has the SAP* emergency user been activated? While this user is active, all the other users are inactive. Check the following documentation for information on this:
    http://help.sap.com/saphelp_nw70/helpdata/en/3a/4a0640d7b28f5ce10000000a155106/frameset.htm
    Regards,
    Désiré

Maybe you are looking for